aboutsummaryrefslogtreecommitdiff
path: root/buffered_file.c
AgeCommit message (Collapse)Author
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: do not include qemu-char everywherePaolo Bonzini
Touching char/char.h basically causes the whole of QEMU to be rebuilt. Avoid this, it is usually unnecessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: add qemu_get_fdPaolo Bonzini
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: consolidate QEMUFile methods in a single QEMUFileOps structPaolo Bonzini
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17buffered_file: buffered_put_buffer() don't need to set last_errorJuan Quintela
Callers on savevm.c:qemu_fflush() will set it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17migration: make migrate_fd_wait_for_unfreeze() return errorsJuan Quintela
Adjust all callers Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17buffered_file: make buffered_flush return the error codeJuan Quintela
Or the amount of data written if there is no error. Adjust all callers. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17buffered_file: callers of buffered_flush() already check for errorsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17buffered_file: We can access directly to bandwidth_limitJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17buffered_file: unfold migrate_fd_closeJuan Quintela
We only used it once, just remove the callback indirection. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17buffered_file: unfold migrate_fd_wait_for_unfreezeJuan Quintela
We only used it once, just remove the callback indirection. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17buffered_file: unfold migrate_fd_put_readyJuan Quintela
We only use it once, just remove the callback indirection. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17buffered_file: unfold migrate_fd_put_bufferJuan Quintela
We only used it once, just remove the callback indirection Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17buffered_file: opaque is MigrationStateJuan Quintela
It always have that type, just change it. We will remove buffered file later on the migration thread series. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17buffered_file: rename opaque to migration_stateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17BufferedFile: append, then flushPaolo Bonzini
Simplify the logic for pushing data from the buffer to the output pipe/socket. This also matches more closely what will be the operation of the migration thread. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2012-10-17buffered_file: g_realloc() can't failJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2012-01-13prepare for future GPLv2+ relicensingPaolo Bonzini
All files under GPLv2 will get GPLv2+ changes starting tomorrow. event_notifier.c and exec-obsolete.h were only ever touched by Red Hat employees and can be relicensed now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: use qemu_file_get_error() return value when possibleJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: rename qemu_file_has_error to qemu_file_get_errorJuan Quintela
Now the function returned errno, so it is better the new name. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: change has_error to contain errno valuesJuan Quintela
We normally already have an errno value. When not, abuse EIO. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20buffered_file: reuse QEMUFile has_error fieldJuan Quintela
Instead of having two has_error fields in QEMUFile & QEMUBufferedFile, reuse the 1st one. Notice that the one in buffered_file is only set after a file operation. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20buffered_file: Use right "opaque"Juan Quintela
buffered_close 's' variable is of type QEMUFileBuffered, and wait_for_unfreeze() expect to receive a MigrationState, that 'coincidentaly' is s->opaque. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: If there is one error, it makes no sense to continueJuan Quintela
Once there, add a comment about what each error mean. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-21change all rt_clock references to use millisecond resolution accessorsPaolo Bonzini
This was done with: sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \ $(git grep -l 'get_clock\>.*rt_clock' ) sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \ $(git grep -l 'new_timer\>.*rt_clock' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2010-12-02migration: allow rate > 4gMichael S. Tsirkin
I'd like to disable bandwidth limit or make it very high, Use int64_t all over to make values >= 4g work. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com>
2010-08-19set proper migration status on ->write error (v5)Marcelo Tosatti
If ->write fails, declare migration status as MIG_STATE_ERROR. Also, in buffered_file.c, ->close the object in case of an error. Fixes "migrate -d "exec:dd of=file", where dd fails to open file. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19QEMUFileBuffered: indicate that we're ready when the underlying file is readyAvi Kivity
QEMUFileBuffered stops writing when the underlying QEMUFile is not ready, and tells its producer so. However, when the underlying QEMUFile becomes ready, it neglects to pass that information along, resulting in stoppage of all data until the next tick (a tenths of a second). Usually this doesn't matter, because most QEMUFiles used with QEMUFileBuffered are almost always ready, but in the case of exec: migration this is not true, due to the small pipe buffers used to connect to the target process. The result is very slow migration. Fix by detecting the readiness notification and propagating it. The detection is a little ugly since QEMUFile overloads put_buffer() to send it, but that's the suject for a different patch. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-07Do not use dprintfmalc
dprintf is already claimed by POSIX[1], and on at least one system is implemented as a macro [1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html Signed-off-by: malc <av1474@comtv.ru>
2009-11-17Block live migrationlirans@il.ibm.com
This patch introduces block migration called during live migration. Block are being copied to the destination in an async way. First the code will transfer the whole disk and then transfer all dirty blocks accumulted during the migration. Still need to improve transition from the iterative phase of migration to the end phase. For now transition will take place when all blocks transfered once, all the dirty blocks will be transfered during the end phase (guest is suspended). Changes from v4: - Global variabels moved to a global state structure allocated dynamically. - Minor coding style issues. - Poll block.c for tracking of dirty blocks instead of manage it here. Signed-off-by: Liran Schour <lirans@il.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09Fix compilation warnings when DEBUG_BUFFERED_FILE is definedPierre Riteau
gcc 4.3.2 throws warnings when DEBUG_BUFFERED_FILE is defined, because we are using the wrong format specifiers to print size_t/ssize_t values. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-20Fix most warnings (errors with -Werror) when debugging is enabledBlue Swirl
I used the following command to enable debugging: perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/* Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-22introduce set_rate_limit function for QEMUFileGlauber Costa
This patch converts the current callers of qemu_fopen_ops(). Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-02-05toplevel: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6531 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-13Remove unnecessary trailing newlinesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-13Introduce a buffered file wrapper for QEMUFilealiguori
This patch introduces a buffered QEMUFile wrapper. This allows QEMUFile's to be rate limited. It also makes it easier to implement a QEMUFile that is asynchronous since the current QEMUFile API requires that all reads and writes be synchronous. The only real non-obvious part of the API is the "frozen" concept. If the backend returns EAGAIN, the QEMUFile is said to be "frozen". This means no additional output will be sent to the backend until the file is unfrozen. qemu_file_put_notify can be used to unfreeze a frozen file. A synchronous interface is also provided to wait for an unfreeze event. This is used during the final part of live migration when the VM is no longer running. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5475 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 02:54:59 +0000