aboutsummaryrefslogtreecommitdiff
path: root/bsd-user
AgeCommit message (Collapse)Author
2016-02-04bsd-user: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-4-git-send-email-peter.maydell@linaro.org
2016-02-03log: do not unnecessarily include qom/cpu.hPaolo Bonzini
Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-17linux-user: convert DEBUG_SIGNAL logging to tracepointsPaolo Bonzini
"Unimplemented" messages go to stderr, everything else goes to tracepoints Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17user: introduce "-d page"Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02translate-all: ensure host page mask is always extended with 1'sPaolo Bonzini
Anthony reported that >4GB guests on Xen with 32bit QEMU broke after commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05). In that patch sizes are masked against qemu_host_page_size/mask which are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space might be bigger than 4GB on Xen. Since ram_addr_t is not available on user-mode emulation targets, ensure that we get a sign extension when masking away the low bits of the address. Remove the ~10 year old scary comment that the type of these variables is probably wrong, with another equally scary comment. The new comment however does not have "???" in it, which is arguably an improvement. For completeness use the alignment macros in linux-user and bsd-user instead of manually doing an &. linux-user and bsd-user are not affected by the Xen issue, however. Reviewed-by: Juan Quintela <quintela@redhat.com> Reported-by: Anthony PERARD <anthony.perard@citrix.com> Fixes: 4ed023ce2a39ab5812d33cf4d819def168965a7f Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-08s/cpu_get_real_ticks/cpu_get_host_ticks/Christopher Covington
This should help clarify the purpose of the function that returns the host system's CPU cycle count. Signed-off-by: Christopher Covington <cov@codeaurora.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> ppc portion Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Support for jemalloc * qemu_mutex_lock_iothread "No such process" fix * cutils: qemu_strto* wrappers * iohandler.c simplification * Many other fixes and misc patches. And some MTTCG work (with Emilio's fixes squashed): * Signal-free TCG kick * Removing spinlock in favor of QemuMutex * User-mode emulation multi-threading fixes/docs # gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (44 commits) cutils: work around platform differences in strto{l,ul,ll,ull} cpu-exec: fix lock hierarchy for user-mode emulation exec: make mmap_lock/mmap_unlock globally available tcg: comment on which functions have to be called with mmap_lock held tcg: add memory barriers in page_find_alloc accesses remove unused spinlock. replace spinlock by QemuMutex. cpus: remove tcg_halt_cond and tcg_cpu_thread globals cpus: protect work list with work_mutex scripts/dump-guest-memory.py: fix after RAMBlock change configure: Add support for jemalloc add macro file for coccinelle configure: factor out adding disas configure vhost-scsi: fix wrong vhost-scsi firmware path checkpatch: remove tests that are not relevant outside the kernel checkpatch: adapt some tests to QEMU CODING_STYLE: update mixed declaration rules qmp: Add example usage of strto*l() qemu wrapper cutils: Add qemu_strtoull() wrapper cutils: Add qemu_strtoll() wrapper ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternDaniel P. Berrange
The free() and g_free() functions both happily accept NULL on any platform QEMU builds on. As such putting a conditional 'if (foo)' check before calls to 'free(foo)' merely serves to bloat the lines of code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove unused include for signal.hDaniel P. Berrange
A number of files were including signal.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-09exec: make mmap_lock/mmap_unlock globally availablePaolo Bonzini
There is some iffy lock hierarchy going on in translate-all.c. To fix it, we need to take the mmap_lock in cpu-exec.c. Make the functions globally available. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-24linux-user: remove --enable-guest-base/--disable-guest-baseLaurent Vivier
All tcg host architectures now support the guest base and as there is no real performance lost, it can be always enabled. Anyway, guest base use can be disabled lively by setting guest base to 0. CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY), it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to use !CONFIG_SOFTMMU instead. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-30bsd-user: Fix operand to cpu_x86_execRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1438195252-21968-1-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-09cpu-exec: Purge all uses of ENV_GET_CPU()Peter Crosthwaite
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use CPUState pointers and retrieving the env_ptr as minimally needed. Scripted conversion for target-* change: for I in target-*/cpu.h; do sed -i \ 's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \ $I; done Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09gdbstub: Change gdbserver_fork() to accept cpu instead of envPeter Crosthwaite
All callsites to this function navigate the cpu->env_ptr only for the function to take the env ptr back to the original cpu ptr. Change the function to just pass in the CPU pointer instead. Removes a core code usage of ENV_GET_CPU() (in gdbstub.c). Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-05target-i386: use memory API to implement SMRAMPaolo Bonzini
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU address space gets an extra region which is an alias of /machine/smram. This extra region is enabled or disabled as the CPU enters/exits SMM. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-27linux-user, bsd-user: Remove two calls to cpu_exec_init_allFam Zheng
The function is a nop for user mode, so just remove them. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <1426496617-10702-3-git-send-email-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10cpu: Make cpu_init() return QOM CPUState objectEduardo Habkost
Instead of making cpu_init() return CPUArchState, return CPUState. Changes were made using the Coccinelle semantic patch below. @@ typedef CPUState; identifier e; expression args; type CPUArchState; @@ - e = + cpu = cpu_init(args); - if (!e) { + if (!cpu) { ... } - cpu = ENV_GET_CPU(env); + e = cpu->env_ptr; @@ identifier new_env, new_cpu, env, cpu; type CPUArchState; expression args; @@ -{ - CPUState *cpu = ENV_GET_CPU(env); - CPUArchState *new_env = cpu_init(args); - CPUState *new_cpu = ENV_GET_CPU(new_env); +{ + CPUState *cpu = ENV_GET_CPU(env); + CPUState *new_cpu = cpu_init(args); + CPUArchState *new_env = new_cpu->env_ptr; ... } @@ identifier c, cpu_init_func, cpu_model; type StateType, CPUType; @@ -static inline StateType* cpu_init(const char *cpu_model) -{ - CPUType *c = cpu_init_func(cpu_model); ( - if (c == NULL) { - return NULL; - } - return &c->env; | - if (c) { - return &c->env; - } - return NULL; ) -} +#define cpu_init(cpu_model) CPU(cpu_init_func(cpu_model)) @@ identifier cpu_init_func; identifier model; @@ -#define cpu_init(model) (&cpu_init_func(model)->env) +#define cpu_init(model) CPU(cpu_init_func(model)) Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Max Filippov <jcmvbkbc@gmail.com> [AF: Fixed up cpu_copy() manually] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-01-20bsd-user/elfload.c: Don't use ldl() or ldq_raw()Peter Maydell
Use get_user_u64() and get_user_ual() instead of the ldl() and ldq_raw() functions. [Note that this change is not compile tested as it is actually in dead code -- none of the bsd-user configurations are PPC.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1421334118-3287-6-git-send-email-peter.maydell@linaro.org
2014-06-11bsd-user: Fix syscall format, add strace support for more syscallsSean Bruno
Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1402246651-71099-10-git-send-email-sbruno@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11bsd-user: Implement strace support for thr_* syscallsSean Bruno
Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1402246651-71099-9-git-send-email-sbruno@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11bsd-user: Implement strace support for extattr_* syscallsSean Bruno
Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1402246651-71099-8-git-send-email-sbruno@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11bsd-user: Implement strace support for __acl_* syscallsSean Bruno
Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1402246651-71099-7-git-send-email-sbruno@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11bsd-user: Implement strace support for print_ioctl syscallSean Bruno
Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1402246651-71099-5-git-send-email-sbruno@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11bsd-user: Implement strace support for print_sysctl syscallSean Bruno
Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1402246651-71099-4-git-send-email-sbruno@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11bsd-user: GPL v2 attribution update and styleSean Bruno
Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1402246651-71099-3-git-send-email-sbruno@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11bsd-user/mmap.c: Don't try to override g_malloc/g_freePeter Maydell
Trying to override the implementations of g_malloc and g_free is a really bad idea -- it means statically linked builds fail to link (because of the multiple definitions provided by this file and by glib), and non-statically linked builds segfault as soon as they try to do anything more complicated than printing the usage message. Remove these overridden versions and just use the glib ones. This is sufficient that bsd-user can run basic x86-64 binaries on OpenBSD again; FreeBSD and NetBSD seem to have further issues. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sean Bruno <sbruno@freebsd.org> Reviewed-by: Ed Maste <emaste@freebsd.org>
2014-06-11bsd-user: refresh freebsd system call numbersStacey Son
Update FreeBSD system call numbers in freebsd/syscall_nr.h. Signed-off-by: Stacey Son <sson@FreeBSD.org> Reviewed-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1401220104-7147-2-git-send-email-sbruno@freebsd.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05Merge remote-tracking branch 'remotes/bonzini/softmmu-smap' into stagingPeter Maydell
* remotes/bonzini/softmmu-smap: (33 commits) target-i386: cleanup x86_cpu_get_phys_page_debug target-i386: fix protection bits in the TLB for SMEP target-i386: support long addresses for 4MB pages (PSE-36) target-i386: raise page fault for reserved bits in large pages target-i386: unify reserved bits and NX bit check target-i386: simplify pte/vaddr calculation target-i386: raise page fault for reserved physical address bits target-i386: test reserved PS bit on PML4Es target-i386: set correct error code for reserved bit access target-i386: introduce support for 1 GB pages target-i386: introduce do_check_protect label target-i386: tweak handling of PG_NX_MASK target-i386: commonize checks for PAE and non-PAE target-i386: commonize checks for 4MB and 4KB pages target-i386: commonize checks for 2MB and 4KB pages target-i386: fix coding standards in x86_cpu_handle_mmu_fault target-i386: simplify SMAP handling in MMU_KSMAP_IDX target-i386: fix kernel accesses with SMAP and CPL = 3 target-i386: move check_io helpers to seg_helper.c target-i386: rename KSMAP to KNOSMAP ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05softmmu: introduce cpu_ldst.hPaolo Bonzini
This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-02Revert "bsd-user: replace fprintf(stderr, ...) with error_report()"Peter Maydell
This reverts commit 1fba509527beb74bdcf50bc07ad3cd8244ad9c61. That commit converted various fprintf(stderr, ...) calls to use error_report(); however none of these bsd-user files include a header which gives a prototype for error_report, so this causes compiler warnings. Since these are just straightforward reporting of command line errors, we should handle these in the obvious way by printing to stderr, as we do for linux-user. There's no need to drag in the error-handling framework for this, especially since user-mode doesn't have the "maybe we need to send this to the monitor" issues system emulation does. Acked-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-26bsd-user: replace fprintf(stderr, ...) with error_report()Le Tan
Replace fprintf(stderr,...) with error_report() in files bsd-user/*. The trailing "\n"s of the @fmt argument have been removed because @fmt of error_report() should not contain newline. Signed-off-by: Le Tan <tamlokveer@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-21target-i386: fix segment flags for SMM and VM86 modePaolo Bonzini
With the next patch, these need to be correct or VM86 tasks have the wrong CPL. The flags are basically what the Intel VMX documentation say is mandatory for entry into a VM86 guest. For consistency, SMM ought to have the same flags except with CPL=0. Tested-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-15Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell
* remotes/kvm/uq/master: pc: port 92 reset requires a low->high transition cpu: make CPU_INTERRUPT_RESET available on all targets apic: do not accept SIPI on the bootstrap processor target-i386: preserve FPU and MSR state on INIT target-i386: fix set of registers zeroed on reset kvm: forward INIT signals coming from the chipset kvm: reset state from the CPU's reset method target-i386: the x86 CPL is stored in CS.selector - auto update hflags accordingly. target-i386: set eflags prior to calling cpu_x86_load_seg_cache() in seg_helper.c target-i386: set eflags and cr0 prior to calling cpu_x86_load_seg_cache() in smm_helper.c target-i386: set eflags prior to calling svm_load_seg_cache() in svm_helper.c pci-assign: limit # of msix vectors pci-assign: Fix a bug when map MSI-X table memory failed kvm: make one_reg helpers available for everyone target-i386: Remove unused data from local array Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-13bsd-user: Remove reference to CONFIG_UNAME_RELEASEPeter Maydell
Commit e586822a5 broke the bsd-user build when it removed the CONFIG_UNAME_RELEASE define but forgot to remove the use of it in bsd-user. Fix this in the simplest possible way (bsd-user doesn't make any use at all of the qemu_uname_release variable except to allow it to be pointlessly set by the user, so this is all we need to do.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1399648001-20980-1-git-send-email-peter.maydell@linaro.org
2014-05-13target-i386: the x86 CPL is stored in CS.selector - auto update hflags ↵Kevin O'Connor
accordingly. Instead of manually calling cpu_x86_set_cpl() when the CPL changes, check for CPL changes on calls to cpu_x86_load_seg_cache(R_CS). Every location that called cpu_x86_set_cpl() also called cpu_x86_load_seg_cache(R_CS), so cpu_x86_set_cpl() is no longer required. This fixes the SMM handler code as it was not setting/restoring the CPL level manually. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-13cpu: Move opaque field from CPU_COMMON to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-20*-user: Improve documentation for lock_user functionStefan Weil
Add a missing "function" and replace "and" by "any". BSD and Linux use the same documentation here, so fix both. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-20*-user: Fix typo in comment (ulocking -> unlocking)Stefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-23gdbstub: Change gdb_handlesig() argument to CPUStateAndreas Färber
Prepares for changing GDBState::c_cpu to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09bsd-user: Change thread_env to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber
Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-14main: use TARGET_ARCH only for the target-specific #definePaolo Bonzini
Everything else needs to match the executable name, which is TARGET_NAME. Before: $ sh4eb-linux-user/qemu-sh4eb --help usage: qemu-sh4 [options] program [arguments...] Linux CPU emulator (compiled for sh4 emulation) After: $ sh4eb-linux-user/qemu-sh4eb --help usage: qemu-sh4eb [options] program [arguments...] Linux CPU emulator (compiled for sh4eb emulation) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1370349928-20419-5-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-05-12bsd-user: OS-agnostic 64-bit SYSCTL typesEd Maste
Use existence of type as #ifdef condition rather than FreeBSD-specific version check, as suggested by Patrick Welche. Also handle the signed (CTLTYPE_S64) case identically to the unsigned (CTLTYPE_U64) case, per later patches in the FreeBSD ports tree (emulators/qemu-devel/files/patch-z-arm-bsd-user-001). Signed-off-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-02target-i386: Replace cpuid_*features fields with a feature word arrayEduardo Habkost
This replaces the feature-bit fields on both X86CPU and x86_def_t structs with an array. With this, we will be able to simplify code that simply does the same operation on all feature words (e.g. kvm_check_features_against_host(), filter_features_for_kvm(), add_flagname_to_bitmaps(), CPU feature-bit property lookup/registration, and the proposed "feature-words" property) The following field replacements were made on X86CPU and x86_def_t: (cpuid_)features -> features[FEAT_1_EDX] (cpuid_)ext_features -> features[FEAT_1_ECX] (cpuid_)ext2_features -> features[FEAT_8000_0001_EDX] (cpuid_)ext3_features -> features[FEAT_8000_0001_ECX] (cpuid_)ext4_features -> features[FEAT_C000_0001_EDX] (cpuid_)kvm_features -> features[FEAT_KVM] (cpuid_)svm_features -> features[FEAT_SVM] (cpuid_)7_0_ebx_features -> features[FEAT_7_0_EBX] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-26bsd-user: Track change in FreeBSD SYSCTL(9) typesEd Maste
Originally from Garrett Cooper in FreeBSD PR ports/155558 http://www.freebsd.org/cgi/query-pr.cgi?pr=155558 Signed-off-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-26qemu-log: default to stderr for logging outputPeter Maydell
Switch the default for qemu_log logging output from "/tmp/qemu.log" to stderr. This is an incompatible change in some sense, but logging is mostly used for debugging purposes so it shouldn't affect production use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log" to the command line. This change requires us to: * update all the documentation/help text (we take the opportunity to smooth out minor inconsistencies between the phrasing in linux-user/bsd-user/system help messages) * make linux-user and bsd-user defer to qemu-log for the default logging destination rather than overriding it themselves * ensure that all logfile closing is done via qemu_log_close() and that that function doesn't close stderr as well as the obvious change to the behaviour of do_qemu_set_log() when no logfile name has been specified. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-16qemu-log: Rename the public-facing cpu_set_log function to qemu_set_logPeter Maydell
Rename the public-facing function cpu_set_log to qemu_set_log. This requires us to rename the internal-only qemu_set_log() to do_qemu_set_log(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename cpu_str_to_log_mask to qemu_str_to_log_maskPeter Maydell
Rename cpu_str_to_log_mask() to qemu_str_to_log_mask(), since the qemu_log functionality is no longer restricted to TCG CPU debug logging. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Abstract out "print usage message about valid log categories"Peter Maydell
Abstract out the "print a human readable list of all the valid log categories" functionality which is currently duplicated in three separate places. (We leave the monitor.c help_cmd() implementation as-is since it wants to send the message to the monitor and add its own information.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Unify {cpu_set,set_cpu}_log_filename as qemu_set_log_filenamePeter Maydell
The qemu_log() functionality is no longer specific to TCG CPU debug logs. Rename cpu_set_log_filename() to qemu_set_log_filename() and drop the pointless wrapper set_cpu_log_filename(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 21:55:34 +0000