aboutsummaryrefslogtreecommitdiff
path: root/bsd-user/signal.c
AgeCommit message (Collapse)Author
2024-07-23bsd-user: Define TARGET_SIGSTACK_ALIGN and use it to round stackWarner Losh
Most (all?) targets require stacks to be properly aligned. Rather than a series of ifdefs in bsd-user/signal.h, instead use a manditory #define for all architectures. Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2024-05-06exec/cpu: Extract page-protection definitions to page-protection.hPhilippe Mathieu-Daudé
Extract page-protection definitions from "exec/cpu-all.h" to "exec/page-protection.h". The list of files requiring the new header was generated using: $ git grep -wE \ 'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)' Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240427155714.53669-3-philmd@linaro.org>
2024-04-26exec: Move [b]tswapl() declarations to 'exec/user/tswap-target.h'Philippe Mathieu-Daudé
tswapl() and bswaptls() are target-dependent and only used by user emulation. Move their definitions to a new header: "exec/user/tswap-target.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Anton Johansson <anjo@rev.ng> Message-Id: <20231212123401.37493-17-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2024-03-13gdbstub: Save target's siginfoGustavo Romero
Save target's siginfo into gdbserver_state so it can be used later, for example, in any stub that requires the target's si_signo and si_code. This change affects only linux-user mode. Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240309030901.1726211-4-gustavo.romero@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2024-03-12user: Prefer fast cpu_env() over slower CPU QOM cast macroPhilippe Mathieu-Daudé
Mechanical patch produced running the command documented in scripts/coccinelle/cpu_env.cocci_template header. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Warner Losh <imp@bsdimp.com> Message-ID: <20240129164514.73104-30-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-06{linux,bsd}-user: Introduce get_task_state()Ilya Leoshkevich
A CPU's TaskState is stored in the CPUState's void *opaque field, accessing which is somewhat awkward due to having to use a cast. Introduce a wrapper and use it everywhere. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240219141628.246823-3-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240305121005.3528075-4-alex.bennee@linaro.org>
2024-01-29include/qemu: Add TCGCPUOps typedef to typedefs.hRichard Henderson
QEMU coding style recommends using structure typedefs. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-05Merge tag 'pull-tcg-20231004' of https://gitlab.com/rth7680/qemu into stagingStefan Hajnoczi
accel: Introduce AccelClass::cpu_common_[un]realize accel: Target agnostic code movement accel/tcg: Cleanups to use CPUState instead of CPUArchState accel/tcg: Move CPUNegativeOffsetState into CPUState tcg: Split out tcg init functions to tcg/startup.h linux-user/hppa: Fix struct target_sigcontext layout build: Remove --enable-gprof # -----BEGIN PGP SIGNATURE----- # # iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmUdsL4dHHJpY2hhcmQu # aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/iYggAvDJEyMCAXSSH97BA # wZT/2D/MFIhOMk6xrQRnrXfrG70N0iVKz44jl9j7k1D+9BOHcso//DDJH3c96k9A # MgDb6W2bsWvC15/Qw6BALf5bb/II0MJuCcQvj3CNX5lNkXAWhwIOBhsZx7V9ST1+ # rihN4nowpRWdV5GeCjDGaJW455Y1gc96hICYHy6Eqw1cUgUFt9vm5aYU3FHlat29 # sYRaVYKUL2hRUPPNcPiPq0AaJ8wN6/s8gT+V1UvTzkhHqskoM4ZU89RchuXVoq1h # SvhKElyULMRzM7thWtpW8qYJPj4mxZsKArESvHjsunGD6KEz3Fh1sy6EKRcdmpG/ # II1vkg== # =k2Io # -----END PGP SIGNATURE----- # gpg: Signature made Wed 04 Oct 2023 14:36:46 EDT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * tag 'pull-tcg-20231004' of https://gitlab.com/rth7680/qemu: (47 commits) tcg/loongarch64: Fix buid error tests/avocado: Re-enable MIPS Malta tests (GitLab issue #1884 fixed) build: Remove --enable-gprof linux-user/hppa: Fix struct target_sigcontext layout tcg: Split out tcg init functions to tcg/startup.h tcg: Remove argument to tcg_prologue_init accel/tcg: Make cpu-exec-common.c a target agnostic unit accel/tcg: Make icount.o a target agnostic unit accel/tcg: Make monitor.c a target-agnostic unit accel/tcg: Rename target-specific 'internal.h' -> 'internal-target.h' exec: Rename target specific page-vary.c -> page-vary-target.c exec: Rename cpu.c -> cpu-target.c accel: Rename accel-common.c -> accel-target.c accel: Make accel-blocker.o target agnostic accel/tcg: Restrict dump_exec_info() declaration exec: Move cpu_loop_foo() target agnostic functions to 'cpu-common.h' exec: Make EXCP_FOO definitions target agnostic accel/tcg: move ld/st helpers to ldst_common.c.inc accel/tcg: Unify user and softmmu do_[st|ld]*_mmu() accel/tcg: Remove env_tlb() ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-04build: Remove --enable-gprofRichard Henderson
This build option has been deprecated since 8.0. Remove all CONFIG_GPROF code that depends on that, including one errant check using TARGET_GPROF. Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-04accel/tcg: Replace CPUState.env_ptr with cpu_env()Richard Henderson
Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-03bsd-user: Implement host_to_target_siginfo.Stacey Son
Used in wait6 system call Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Warner Losh <imp@bsdimp.com> Message-Id: <20230925182425.3163-4-kariem.taha2.7@gmail.com>
2023-09-20bsd-user: spelling fixesMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Kyle Evans <kevans@FreeBSD.org> Reviewed-by: Warner Losh <imp@bsdimp.com>
2023-08-28bsd-user; Update the definitions of __put_user and __get_user macrosWarner Losh
Use __builtin_choose_expr to avoid type promotion from ?: in __put_user_e and __get_user_e macros. Copied from linux-user/qemu.h, originally by Blue Swirl. Signed-off-by: Warner Losh <imp@bsdimp.com> Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-07gdbstub: move chunks of user code into own filesAlex Bennée
The process was pretty similar to the softmmu move except we take the time to split stuff between user.c and user-target.c to avoid as much target specific compilation as possible. We also start to make use of our shiny new header scheme so the user-only helpers can be included without the rest of the exec/gsbstub.h cruft. As before we split some functions into user and softmmu versions Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230302190846.2593720-12-alex.bennee@linaro.org> Message-Id: <20230303025805.625589-12-richard.henderson@linaro.org>
2022-04-21compiler.h: replace QEMU_NORETURN with G_NORETURNMarc-André Lureau
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in glib-compat. Note that this attribute must be placed before the function declaration (bringing a bit of consistency in qemu codebase usage). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Warner Losh <imp@bsdimp.com> Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
2022-02-21exec/exec-all: Move 'qemu/log.h' include in units requiring itPhilippe Mathieu-Daudé
Many files use "qemu/log.h" declarations but neglect to include it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is a core component and shouldn't be used that way. Move the "qemu/log.h" inclusion locally to each unit requiring it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220207082756.82600-10-f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-01bsd-user/signal.c: Only copy the _capsicum for FreeBSD_version > 1400026Warner Losh
The capsicum signal stuff is new with FreeBSD 14, rev 1400026, so only define QEMU_SI_CAPSICUM there. Only copy _capsicum when QEMU_SI_CAPSICUM is defined. Default to no info being passed for signals we make no guess about. Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-30bsd-user/signal.c: do_sigaltstackWarner Losh
Implement the meat of the sigaltstack(2) system call with do_sigaltstack. With that, all the stubbed out routines are complete, so remove now-incorrect comment. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-30bsd-user/signal.c: implement do_sigactionWarner Losh
Implement the meat of the sigaction(2) system call with do_sigaction and helper routiner block_signals (which is also used to implemement signal masking so it's global). Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-30bsd-user/signal.c: implement do_sigreturnWarner Losh
Implements the meat of a sigreturn(2) system call via do_sigreturn, and helper reset_signal_mask. Fix the prototype of do_sigreturn in qemu.h and remove do_rt_sigreturn since it's linux only. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: process_pending_signalsWarner Losh
Process the currently queued signals. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: tswap_siginfoWarner Losh
Convert siginfo from targer to host. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: handle_pending_signalWarner Losh
Handle a queued signal. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: setup_frameWarner Losh
setup_frame sets up a signalled stack frame. Associated routines to extract the pointer to the stack frame and to support alternate stacks. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: sigset manipulation routines.Warner Losh
target_sigemptyset: resets a set to having no bits set target_sigaddset: adds a signal to a set target_sigismember: returns true when signal is a member host_to_target_sigset_internal: convert host sigset to target host_to_target_sigset: convert host sigset to target target_to_host_sigset_internal: convert target sigset to host target_to_host_sigset: convert target sigset to host Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: Fill in queue_signalWarner Losh
Fill in queue signal implementation, as well as routines allocate and delete elements of the signal queue. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: Implement dump_core_and_abortWarner Losh
Force delivering a signal and generating a core file. It's a global function for the moment... Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: Implement host_signal_handlerWarner Losh
Implement host_signal_handler to handle signals generated by the host and to do safe system calls. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: Implement rewind_if_in_safe_syscallWarner Losh
Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: host_to_target_siginfo_noswapWarner Losh
Implement conversion of host to target siginfo. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user: Add trace events for bsd-userWarner Losh
Add the bsd-user specific events and infrastructure. Only include the linux-user trace events for linux-user, not bsd-user. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user: Add host signals to the buildWarner Losh
Start to add the host signal functionality to the build. Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: Add si_type argument to queue_signalWarner Losh
Mirror the linux-user practice and add a si_type argument to queue signal. This will be transported as the upper 8 bits in the si_type element of siginfo so that we know what bits of the structure are valid and so we can properly implement host_to_target_siginfo_noswap and tswap_siginfo. Adapt the one caller of queue_signal to the new interface. Use all the same names as Linux (except _RT which we don't treat differently, unlike Linux), though some are unused. Place this into signal-common.h since that's a better place given bsd-user's structure. Move prototype of queue_signal to signal-common.h to mirror linux-user's location. Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: Implement signal_init()Warner Losh
Initialize the signal state for the emulator. Setup a set of sane default signal handlers, mirroring the host's signals. For fatal signals (those that exit by default), establish our own set of signal handlers. Stub out the actual signal handler we use for the moment. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> XXX SIGPROF PENDING
2022-01-28bsd-user/signal.c: implement abstract target / host signal translationWarner Losh
Implement host_to_target_signal and target_to_host_signal. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: implement cpu_loop_exit_sigbusWarner Losh
First attempt at implementing cpu_loop_exit_sigbus, mostly copied from linux-user version of this function. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: Implement cpu_loop_exit_sigsegvWarner Losh
First attempt at implementing cpu_loop_exit_sigsegv, mostly copied from linux-user version of this function. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-28bsd-user/signal.c: implement force_sig_faultWarner Losh
Start to implement the force_sig_fault code. This currently just calls queue_signal(). The bsd-user fork version of that will handle this the synchronous nature of this call. Add signal-common.h to hold signal helper functions like force_sig_fault. Signed-off-by: Stacey Son <sson@FreeBSD.org> Signed-off-by: Kyle Evans <kevans@freebsd.org> Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02bsd-user: Add stubs for new signal routinesWarner Losh
Until the signal support is merged from the bsd-user fork, we need stubs for cpu_loop_exit_sigsegv and cpu_loop_exit_sigbus to link. These call abort after logging a message. Since singals aren't supported here yet, this is sufficient. Signed-off-by: Warner Losh <imp@bsdimp.com> Message-Id: <20211102225248.52999-2-imp@bsdimp.com> Tested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-18bsd-user/signal: Create a dummy signal queueing functionWarner Losh
Create dummy signal queueing function so we can start to integrate other architectures (at the cost of signals remaining broken) to tame the dependency graph a bit and to bring in signals in a more controlled fashion. Log unimplemented events to it in the mean time. Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
2021-05-11bsd-user: remove target_signal.h, it's unusedWarner Losh
Remove the target_signal.h file. None of its contents are currently used and the bsd-user fork doesn't use them (so this reduces the diffs there). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Warner Losh <imp@bsdimp.com>
2016-02-04bsd-user: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-4-git-send-email-peter.maydell@linaro.org
2015-12-17linux-user: convert DEBUG_SIGNAL logging to tracepointsPaolo Bonzini
"Unimplemented" messages go to stderr, everything else goes to tracepoints Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-11maint: remove unused include for signal.hDaniel P. Berrange
A number of files were including signal.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-01-05Fix more FSF addressesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6192 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-26Preliminary BSD user emulator supportblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5544 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-22 03:15:41 +0000