aboutsummaryrefslogtreecommitdiff
path: root/bootdevice.c
AgeCommit message (Collapse)Author
2019-10-31bootdevice: FW_CFG interface for LCHS valuesSam Eiderman
Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS. Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will report - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we cannot force SeaBIOS to rely on physical geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot report more than 16 physical heads when moved to an IDE controller, since the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometries directly we are able to support such "exotic" disks. We serialize this information in a similar way to the "bootorder" interface. The new fw_cfg entry is "bios-geometry". Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-31bootdevice: Refactor get_boot_devices_listSam Eiderman
Move device name construction to a separate function. We will reuse this function in the following commit to pass logical CHS parameters through fw_cfg much like we currently pass bootindex. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-31bootdevice: Add interface to gather LCHSSam Eiderman
Add an interface to provide direct logical CHS values for boot devices. We will use this interface in the next commits. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2018-08-16fw_cfg: ignore suffixes in the bootdevice list dependent on machine classMark Cave-Ayland
For the older machines (such as Mac and SPARC) the DT nodes representing bootdevices for disk nodes are irregular for mainly historical reasons. Since the majority of bootdevice nodes for these machines either do not have a separate disk node or require different (custom) names then it is much easier for processing to just disable all suffixes for a particular machine. Introduce a new ignore_boot_device_suffixes MachineClass property to control bootdevice suffix generation, defaulting to false in order to preserve compatibility. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20180810124027.10698-1-mark.cave-ayland@ilande.co.uk> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-04Makefile: Move bootdevice.o to common-obj-yThomas Huth
There does not seem to be any target specific code in this file, so we can put it into "common-obj" instead of "obj" to compile it only once for all targets. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1498454578-18709-7-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-20error: Remove NULL checks on error_propagate() callsEduardo Habkost
error_propagate() already ignores local_err==NULL, so there's no need to check it before calling. Coccinelle patch used to perform the changes added to scripts/coccinelle/error_propagate_null.cocci. Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-2-git-send-email-ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-19explicitly include hw/qdev-core.hPaolo Bonzini
exec/cpu-all.h includes qom/cpu.h, which includes hw/qdev-core.h. Explicit inclusion will keep things working when cpu.h will not be included indirectly almost everywhere (either directly or through qemu-common.h). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-04all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2015-03-26misc: fix typos in copyright declarationGonglei
Add a space after comma. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Message-Id: <1427374663-10168-1-git-send-email-arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-08Merge remote-tracking branch 'remotes/gonglei/tags/bootdevice-next-20150303' ↵Peter Maydell
into staging bootdevice: bug fixes # gpg: Signature made Tue Mar 3 05:18:39 2015 GMT using RSA key ID DDE30FBB # gpg: Good signature from "Gonglei <arei.gonglei@huawei.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5178 9C82 617F 2F58 8693 63B1 BA7A 65B0 DDE3 0FBB * remotes/gonglei/tags/bootdevice-next-20150303: bootdevice: add check in restore_boot_order() bootdevice: check boot order argument validation before vm running Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-03bootdevice: add check in restore_boot_order()Gonglei
qemu_boot_set() can't fail in restore_boot_order(), then simply assert it doesn't fail, by passing &error_abort if boot_set_handler set. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-02-27bootdevice: fix segment fault when booting guest with '-kernel' and '-initrd'Gonglei
Reproducer: $./qemu-system-x86_64 --enable-kvm -kernel /home/vmlinuz-2.6.32.12-0.7-default \ -initrd /home/initrd-2.6.32.12-0.7-default -append \ "root=/dev/ram rw console=ttyS0,115200" -dtb guest.dtb -vnc :10 --monitor stdio -smp 2 QEMU 2.2.50 monitor - type 'help' for more information (qemu) Segmentation fault (core dumped) Reported-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Message-Id: <1425001784-6752-1-git-send-email-arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-11qdev: support to get a device firmware path directlyGonglei
commit 6b1566c (qdev: Introduce FWPathProvider interface) did a good job for supproting to get firmware path on some different architectures. Moreover further more, we can use the interface to get firmware path name for a device which isn't attached a specific bus, such as virtio-bus, scsi-bus etc. When the device (such as vhost-scsi) realize the TYPE_FW_PATH_PROVIDER interface, we should introduce a new function to get the correct firmware path name for it. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-22bootdevice: add Error **errp argument for QEMUBootSetHandlerGonglei
It will be useful for checking when we change traditional boot order dynamically and propagate error message to the monitor. For x86 architecture, we pass &local_err to set_boot_dev() when vm startup in pc_coms_init(). Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: qemu-ppc@nongnu.org Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-12-22bootdevice: add validate check for qemu_boot_set()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-12-22bootdevice: add Error **errp argument for qemu_boot_set()Gonglei
It will be useful for checking when we change traditional boot order dynamically and propagate error message to the monitor. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-12-22bootdevice: add Error **errp argument for validate_bootdevices()Gonglei
It will be useful for checking when we change traditional boot order dynamically and propagate error message to the monitor. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-12-22bootdevice: move code about bootorder from vl.c to bootdevice.cGonglei
First, we can downsize vl.c, make it simpler by little and little. Second, I can maintain those code and make some improvement. Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-10-15bootindex: change fprintf to error_reportGonglei
The function may be called by qmp command, we should report error message to the caller. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15bootindex: delete bootindex when device is removedGonglei
Device should be removed from global boot list when it is hot-unplugged. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15bootindex: move calling add_boot_device_patch to bootindex setter functionGonglei
On this way, we can assure the new bootindex take effect during vm rebooting. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15bootindex: add a setter/getter functions wrapper for bootindex propertyGonglei
when we remove bootindex form qdev.property to qom.property, we can use those functions set/get bootindex property for all correlative devices. Meanwhile set the initial value of bootindex to -1. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15bootindex: support to set a existent device's bootindex to -1Gonglei
When set a device's bootindex to -1, we remove it from global fw_boot_order list. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15bootindex: rework add_boot_device_path functionGonglei
Add the function of updating bootindex about fw_boot_order list in add_boot_device_path(). We should delete the old one if a device has existed in global fw_boot_order list. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15bootindex: add del_boot_device_path functionGonglei
Introduce del_boot_device_path() to clean up fw_cfg content when hot-unplugging a device that refers to a bootindex or update a existent devcie's bootindex. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Chenliang <chenliang88@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15bootindex: add check bootindex functionGonglei
Determine whether a given bootindex exists or not. If exists, we report an error. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15bootdevice: move bootdevice related code to new file bootdevice.cGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-25 11:51:21 +0000