aboutsummaryrefslogtreecommitdiff
path: root/blockdev.c
AgeCommit message (Collapse)Author
2019-06-24blockdev: enable non-root nodes for transaction drive-backup sourceVladimir Sementsov-Ogievskiy
We forget to enable it for transaction .prepare, while it is already enabled in do_drive_backup since commit a2d665c1bc362 "blockdev: loosen restrictions on drive-backup source node" Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190618140804.59214-1-vsementsov@virtuozzo.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-18block: drop bs->jobVladimir Sementsov-Ogievskiy
Drop remaining users of bs->job: 1. assertions actually duplicated by assert(!bs->refcnt) 2. trace-point seems not enough reason to change stream_start to return BlockJob pointer 3. Restricting creation of two jobs based on same bs is bad idea, as 3.1 Some jobs creates filters to be their main node, so, this check don't actually prevent creating second job on same real node (which will create another filter node) (but I hope it is restricted by other mechanisms) 3.2 Even without bs->job we have two systems of permissions: op-blockers and BLK_PERM 3.3 We may want to run several jobs on one node one day And finally, drop bs->job pointer itself. Hurrah! Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18blockdev: blockdev_mark_auto_del: drop usage of bs->jobVladimir Sementsov-Ogievskiy
We are going to remove bs->job pointer. Drop it's usage in blockdev_mark_auto_del: instead of looking at bs->job let's check all jobs for references to bs. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-14blockdev: Overlays are not snapshotsMax Reitz
There are error messages which refer to an overlay node as the snapshot. That is wrong, those are two different things. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20190603202236.1342-3-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14blockdev-backup: don't check aio_context too earlyJohn Snow
in blockdev_backup_prepare, we check to make sure that the target is associated with a compatible aio context. However, do_blockdev_backup is called later and has some logic to move the target to a compatible aio_context. The transaction version will fail certain commands needlessly early as a result. Allow blockdev_backup_prepare to simply call do_blockdev_backup, which will ultimately decide if the contexts are compatible or not. Note: the transaction version has always disallowed this operation since its initial commit bd8baecd (2014), whereas the version of qmp_blockdev_backup at the time, from commit c29c1dd312f, tried to enforce the aio_context switch instead. It's not clear, and I can't see from the mailing list archives at the time, why the two functions take a different approach. It wasn't until later in efd7556708b (2016) that the standalone version tried to determine if it could set the context or not. Reported-by: aihua liang <aliang@redhat.com> Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1683498 Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20190523170643.20794-2-jsnow@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-04blockdev: Use bdrv_try_set_aio_context() for monitor commandsKevin Wolf
Monitor commands can handle errors, so they can easily be converted to using the safer bdrv_try_set_aio_context() function. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04block: Add BlockBackend.ctxKevin Wolf
This adds a new parameter to blk_new() which requires its callers to declare from which AioContext this BlockBackend is going to be used (or the locks of which AioContext need to be taken anyway). The given context is only stored and kept up to date when changing AioContexts. Actually applying the stored AioContext to the root node is saved for another commit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04blockdev: fix missed target unref for drive-backupJohn Snow
If the bitmap can't be used for whatever reason, we skip putting down the reference. Fix that. In practice, this means that if you attempt to gracefully exit QEMU after a backup command being rejected, bdrv_close_all will fail and tell you some unpleasant things via assert(). Reported-by: aihua liang <aliang@redhat.com> Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1703916 Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-30Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Wed 29 May 2019 00:58:33 BST # gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full] # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/bitmaps-pull-request: iotests: test external snapshot with bitmap copying qapi: support external bitmaps in block-dirty-bitmap-merge migration/dirty-bitmaps: change bitmap enumeration method Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-28qapi: support external bitmaps in block-dirty-bitmap-mergeVladimir Sementsov-Ogievskiy
Add new optional parameter making possible to merge bitmaps from different nodes. It is needed to maintain external snapshots during incremental backup chain history. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20190517152111.206494-2-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-05-28blockdev: loosen restrictions on drive-backup source nodeJohn Snow
We mandate that the source node must be a root node; but there's no reason I am aware of that it needs to be restricted to such. In some cases, we need to make sure that there's a medium present, but in the general case we can allow the backup job itself to do the graph checking. This patch helps improve the error message when you try to backup from the same node more than once, which is reflected in the change to test 056. For backups with bitmaps, it will also show a better error message that the bitmap is in use instead of giving you something cryptic like "need a root node." Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1707303 Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20190521210053.8864-1-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-04-18blockdev: Make -drive format=help print to stdoutMarkus Armbruster
Command line help explicitly requested by the user should be printed to stdout, not stderr. We do elsewhere. Adjust -drive to match: use qemu_printf() instead of error_printf(). Plain printf() would be wrong because we need to print to the current monitor for "drive_add ... format=help". Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190417190641.26814-13-armbru@redhat.com>
2019-03-19blockdev: Check @replaces in blockdev_mirror_commonMax Reitz
There is no reason why the constraints we put on @replaces should be limited to drive-mirror. Therefore, move the sanity checks from qmp_drive_mirror() to blockdev_mirror_common() so they apply to blockdev-mirror as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-13Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Tue 12 Mar 2019 20:23:08 GMT # gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full] # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/bitmaps-pull-request: (22 commits) tests/qemu-iotests: add bitmap resize test 246 block/qcow2-bitmap: Allow resizes with persistent bitmaps block/qcow2-bitmap: Don't check size for IN_USE bitmap docs/interop/qcow2: Improve bitmap flag in_use specification bitmaps: Fix typo in function name block/dirty-bitmaps: implement inconsistent bit block/dirty-bitmaps: disallow busy bitmaps as merge source block/dirty-bitmaps: prohibit removing readonly bitmaps block/dirty-bitmaps: prohibit readonly bitmaps for backups block/dirty-bitmaps: add block_dirty_bitmap_check function block/dirty-bitmap: add inconsistent status block/dirty-bitmaps: add inconsistent bit iotests: add busy/recording bit test to 124 blockdev: remove unused paio parameter documentation block/dirty-bitmaps: move comment block block/dirty-bitmaps: unify qmp_locked and user_locked calls block/dirty-bitmap: explicitly lock bitmaps with successors nbd: change error checking order for bitmaps block/dirty-bitmap: change semantics of enabled predicate block/dirty-bitmap: remove set/reset assertions against enabled bit ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # tests/qemu-iotests/group
2019-03-12block: Add an 'x-blockdev-reopen' QMP commandAlberto Garcia
This command allows reopening an arbitrary BlockDriverState with a new set of options. Some options (e.g node-name) cannot be changed and some block drivers don't allow reopening, but otherwise this command is modelled after 'blockdev-add' and the state of the reopened BlockDriverState should generally be the same as if it had just been added by 'blockdev-add' with the same set of options. One notable exception is the 'backing' option: 'x-blockdev-reopen' requires that it is always present unless the BlockDriverState in question doesn't have a current or default backing file. This command allows reconfiguring the graph by using the appropriate options to change the children of a node. At the moment it's possible to change a backing file by setting the 'backing' option to the name of the new node, but it should also be possible to add a similar functionality to other block drivers (e.g. Quorum, blkverify). Although the API is unlikely to change, this command is marked experimental for the time being so there's room to see if the semantics need changes. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-12qapi: drop x- from x-block-latency-histogram-setVladimir Sementsov-Ogievskiy
Drop x- and x_ prefixes for latency histograms and update version to 4.0 Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-12bitmaps: Fix typo in function nameEric Blake
Commit a88b179f introduced the ability to set and query bitmap persistence, but with an atypical spelling. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 20190308205845.25734-1-eblake@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12block/dirty-bitmaps: prohibit removing readonly bitmapsJohn Snow
Remove is an inherently RW operation, so this will fail anyway, but we can fail it very quickly instead of trying and failing, so do so. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190301191545.8728-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12block/dirty-bitmaps: prohibit readonly bitmaps for backupsJohn Snow
drive and blockdev backup cannot use readonly bitmaps, because the sync=incremental mechanism actually edits the bitmaps on success. If you really want to do this operation, use a copied bitmap. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190301191545.8728-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12block/dirty-bitmaps: add block_dirty_bitmap_check functionJohn Snow
Instead of checking against busy, inconsistent, or read only directly, use a check function with permissions bits that let us streamline the checks without reproducing them in many places. Included in this patch are permissions changes that simply add the inconsistent check to existing permissions call spots, without addressing existing bugs. In general, this means that busy+readonly checks become BDRV_BITMAP_DEFAULT, which checks against all three conditions. busy-only checks become BDRV_BITMAP_ALLOW_RO. Notably, remove allows inconsistent bitmaps, so it doesn't follow the pattern. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190301191545.8728-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12blockdev: remove unused paio parameter documentationJohn Snow
This field isn't present anymore. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190223000614.13894-10-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12block/dirty-bitmaps: unify qmp_locked and user_locked callsJohn Snow
These mean the same thing now. Unify them and rename the merged call bdrv_dirty_bitmap_busy to indicate semantically what we are describing, as well as help disambiguate from the various _locked and _unlocked versions of bitmap helpers that refer to mutex locks. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190223000614.13894-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12qapi: move to QOM path for x-block-latency-histogram-setVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-08block: iterate_format with account of whitelistingAndrey Shinkevich
bdrv_iterate_format (which is currently only used for printing out the formats supported by the block layer) doesn't take format whitelisting into account. This creates a problem for tests: they enumerate supported formats to decide which tests to enable, but then discover that QEMU doesn't let them actually use some of those formats. To avoid that, exclude formats that are not whitelisted from enumeration, if whitelisting is in use. Since we have separate whitelists for r/w and r/o, take this a parameter to bdrv_iterate_format, and print two lists of supported formats (r/w and r/o) in main qemu. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-25block: Use bdrv_refresh_filename() to pullMax Reitz
Before this patch, bdrv_refresh_filename() is used in a pushing manner: Whenever the BDS graph is modified, the parents of the modified edges are supposed to be updated (recursively upwards). However, that is nonviable, considering that we want child changes not to concern parents. Also, in the long run we want a pull model anyway: Here, we would have a bdrv_filename() function which returns a BDS's filename, freshly constructed. This patch is an intermediate step. It adds bdrv_refresh_filename() calls before every place a BDS.filename value is used. The only exceptions are protocol drivers that use their own filename, which clearly would not profit from refreshing that filename before. Also, bdrv_get_encrypted_filename() is removed along the way (as a user of BDS.filename), since it is completely unused. In turn, all of the calls to bdrv_refresh_filename() before this patch are removed, because we no longer have to call this function on graph changes. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190201192935.18394-2-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-19blockdev: acquire aio_context for bitmap add/removeJohn Snow
When bitmaps are persistent, they may incur a disk read or write when bitmaps are added or removed. For configurations like virtio-dataplane, failing to acquire this lock will abort QEMU when disk IO occurs. We used to acquire aio_context as part of the bitmap lookup, so re-introduce the lock for just the cases that have an IO penalty. Commit 2119882c removed these locks, and I failed to notice this when we committed fd5ae4cc, so this has been broken since persistent bitmaps were introduced. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1672010 Reported-By: Aihua Liang <aliang@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20190218233154.19303-1-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-01-31qapi: add x-debug-query-block-graphVladimir Sementsov-Ogievskiy
Add a new command, returning block nodes (and their users) graph. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20181221170909.25584-2-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-14block: remove 'x' prefix from experimental bitmap APIsJohn Snow
The 'x' prefix was added because I was uncertain of the direction we'd take for the libvirt API. With the general approach solidified, I feel comfortable committing to this API for 4.0. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20181221093529.23855-5-jsnow@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-14blockdev: n-ary bitmap mergeJohn Snow
Especially outside of transactions, it is helpful to provide all-or-nothing semantics for bitmap merges. This facilitates the coalescing of multiple bitmaps into a single target for the "checkpoint" interpretation when assembling bitmaps that represent arbitrary points in time from component bitmaps. This is an incompatible change from the preliminary version of the API. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20181221093529.23855-4-jsnow@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-14blockdev: abort transactions in reverse orderJohn Snow
Presently, we abort transactions in the same order they were processed in. Bitmap commands, though, attempt to restore backup data structures on abort. That's not valid, they need to be aborted in reverse chronological order. Replace the QSIMPLEQ data structure with a QTAILQ one, so we can iterate in reverse for the abort phase of the transaction. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20181221093529.23855-2-jsnow@redhat.com> [eblake: rebase] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-11qemu/queue.h: leave head structs anonymous unless necessaryPaolo Bonzini
Most list head structs need not be given a name. In most cases the name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV or reverse iteration, but this does not apply to lists of other kinds, and even for QTAILQ in practice this is only rarely needed. In addition, we will soon reimplement those macros completely so that they do not need a name for the head struct. So clean up everything, not giving a name except in the rare case where it is necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11qemu/queue.h: do not access tqe_prev directlyPaolo Bonzini
Use the QTAILQ_IN_USE macro instead, it does the same thing but the next patch will change it to a different definition. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-18error: Remove NULL checks on error_propagate() callsMarkus Armbruster
Patch created mechanically by rerunning: $ spatch --sp-file scripts/coccinelle/error_propagate_null.cocci \ --macro-file scripts/cocci-macro-file.h \ --dir . --in-place Whitespace tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181213173113.11211-1-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-12-14block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()Alberto Garcia
This patch replaces the bdrv_reopen() call that set and remove the BDRV_O_RDWR flag with the new bdrv_reopen_set_read_only() function. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-12-14block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()Alberto Garcia
This patch replaces the bdrv_reopen() calls that set and remove the BDRV_O_RDWR flag with the new bdrv_reopen_set_read_only() function. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-12blockdev: Consistently use snapshot_node_name in external_snapshot_prepare()Peter Maydell
In the function external_snapshot_prepare() we have a BlockdevSnapshotSync struct, which has the usual combination of has_snapshot_node_name and snapshot_node_name fields for an optional field. We set up a local variable const char *snapshot_node_name = s->has_snapshot_node_name ? s->snapshot_node_name : NULL; and then mostly use "if (!snapshot_node_name)" for checking whether we have a snapshot node name. The exception is that in one place we check s->has_snapshot_node_name instead. This confuses Coverity (CID 1396473), which thinks it might be possible to get here with s->has_snapshot_node_name true but snapshot_node_name NULL, and warns that the call to qdict_put_str() will segfault in that case. Make the code consistent and unconfuse Coverity by using the same check for this conditional that we do in the rest of the surrounding code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-12blockdev: handle error on block latency histogram set errorzhenwei pi
Function block_latency_histogram_set may return error, but qapi ignore this. This can be reproduced easily by qmp command: virsh qemu-monitor-command INSTANCE '{"execute":"x-block-latency-histogram-set", "arguments":{"device":"drive-virtio-disk1","boundaries":[10,200,40]}}' In fact this command does not work, but we still get success result. qmp_x_block_latency_histogram_set is a batch setting API, report error ASAP. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-05block: Make auto-read-only=on default for -driveKevin Wolf
While we want machine interfaces like -blockdev and QMP blockdev-add to add as little auto-detection as possible so that management tools are explicit about their needs, -drive is a convenience option for human users. Enabling auto-read-only=on by default there enables users to use read-only images for read-only guest devices without having to specify read-only=on explicitly. If they try to attach the image to a read-write device, they will still get an error message. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-11-05block: Add auto-read-only optionKevin Wolf
If a management application builds the block graph node by node, the protocol layer doesn't inherit its read-only option from the format layer any more, so it must be set explicitly. Backing files should work on read-only storage, but at the same time, a block job like commit should be able to reopen them read-write if they are on read-write storage. However, without option inheritance, reopen only changes the read-only option for the root node (typically the format layer), but not the protocol layer, so reopening fails (the format layer wants to get write permissions, but the protocol layer is still read-only). A simple workaround for the problem in the management tool would be to open the protocol layer always read-write and to make only the format layer read-only for backing files. However, sometimes the file is actually stored on read-only storage and we don't know whether the image can be opened read-write (for example, for NBD it depends on the server we're trying to connect to). This adds an option that makes QEMU try to open the image read-write, but allows it to degrade to a read-only mode without returning an error. The documentation for this option is consciously phrased in a way that allows QEMU to switch to a better model eventually: Instead of trying when the image is first opened, making the read-only flag dynamic and changing it automatically whenever the first BLK_PERM_WRITE user is attached or the last one is detached would be much more useful behaviour. Unfortunately, this more useful behaviour is also a lot harder to implement, and libvirt needs a solution now before it can switch to -blockdev, so let's start with this easier approach for now. Instead of adding a new auto-read-only option, turning the existing read-only into an enum (with a bool alternate for compatibility) was considered, but it complicated the implementation to the point that it didn't seem to be worth it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-10-29block/backup: prohibit backup from using in use bitmapsJohn Snow
If the bitmap is frozen, we shouldn't touch it. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20181002230218.13949-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29block/dirty-bitmaps: prohibit enable/disable on locked/frozen bitmapsJohn Snow
We're not being consistent about this. If it's in use by an operation, the user should not be able to change the behavior of that bitmap. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20181002230218.13949-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29block/dirty-bitmaps: allow clear on disabled bitmapsJohn Snow
Similarly to merge, it's OK to allow clear operations on disabled bitmaps, as this condition only means that they are not recording new writes. We are free to clear it if the user requests it. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20181002230218.13949-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29block/dirty-bitmaps: add user_locked status checkerJohn Snow
Instead of both frozen and qmp_locked checks, wrap it into one check. frozen implies the bitmap is split in two (for backup), and shouldn't be modified. qmp_locked implies it's being used by another operation, like being exported over NBD. In both cases it means we shouldn't allow the user to modify it in any meaningful way. Replace any usages where we check both frozen and qmp_locked with the new check. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20181002230218.13949-2-jsnow@redhat.com [w/edits Suggested-By: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>] Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29qapi: add transaction support for x-block-dirty-bitmap-mergeVladimir Sementsov-Ogievskiy
New action is like clean action: do the whole thing in .prepare and undo in .abort. This behavior for bitmap-changing actions is needed because backup job actions use bitmap in .prepare. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29blockdev: rename block-dirty-bitmap-clear transaction handlersVladimir Sementsov-Ogievskiy
Rename block-dirty-bitmap-clear transaction handlers to reuse them for x-block-dirty-bitmap-merge transaction in the following patch. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29dirty-bitmap: make it possible to restore bitmap after mergeVladimir Sementsov-Ogievskiy
Add backup parameter to bdrv_merge_dirty_bitmap() to be used then with bdrv_restore_dirty_bitmap() if it needed to restore the bitmap after merge operation. This is needed to implement bitmap merge transaction action in further commit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29dirty-bitmap: rename bdrv_undo_clear_dirty_bitmapVladimir Sementsov-Ogievskiy
Use more generic names to reuse the function for bitmap merge in the following commit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29dirty-bitmap: switch assert-fails to errors in bdrv_merge_dirty_bitmapVladimir Sementsov-Ogievskiy
Move checks from qmp_x_block_dirty_bitmap_merge() to bdrv_merge_dirty_bitmap(), to share them with dirty bitmap merge transaction action in future commit. Note: for now, only qmp_x_block_dirty_bitmap_merge() calls bdrv_merge_dirty_bitmap(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29blockdev-backup: add bitmap argumentJohn Snow
It is only an oversight that we don't allow incremental backup with blockdev-backup. Add the bitmap argument which enables this. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20180830211605.13683-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-19blockdev: Convert drive_new() to ErrorMarkus Armbruster
Calling error_report() from within a function that takes an Error ** argument is suspicious. drive_new() calls error_report() even though it can run within drive_init_func(), which takes an Error ** argument. drive_init_func()'s caller main(), via qemu_opts_foreach(), is fine with it, but clean it up anyway: * Convert drive_new() to Error * Update add_init_drive() to report the error received from drive_new() * Make main() pass &error_fatal through qemu_opts_foreach(), drive_init_func() to drive_new() * Make default_drive() pass &error_abort through qemu_opts_foreach(), drive_init_func() to drive_new() Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181017082702.5581-34-armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 21:49:47 +0000