aboutsummaryrefslogtreecommitdiff
path: root/blockdev.c
AgeCommit message (Collapse)Author
2015-04-28block: Ensure consistent bitmap function prototypesJohn Snow
We often don't need the BlockDriverState for functions that operate on bitmaps. Remove it. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1429314609-29776-15-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: add block-dirty-bitmap-clearJohn Snow
Add bdrv_clear_dirty_bitmap and a matching QMP command, qmp_block_dirty_bitmap_clear that enables a user to reset the bitmap attached to a drive. This allows us to reset a bitmap in the event of a full drive backup. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1429314609-29776-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: Add support of "dirty-bitmap" sync mode for drive-backupJohn Snow
For "dirty-bitmap" sync mode, the block job will iterate through the given dirty bitmap to decide if a sector needs backup (backup all the dirty clusters and skip clean ones), just as allocation conditions of "top" sync mode. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1429314609-29776-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28block: Add bitmap successorsJohn Snow
A bitmap successor is an anonymous BdrvDirtyBitmap that is intended to be created just prior to a sensitive operation (e.g. Incremental Backup) that can either succeed or fail, but during the course of which we still want a bitmap tracking writes. On creating a successor, we "freeze" the parent bitmap which prevents its deletion, enabling, anonymization, or creating a bitmap with the same name. On success, the parent bitmap can "abdicate" responsibility to the successor, which will inherit its name. The successor will have been tracking writes during the course of the backup operation. The parent will be safely deleted. On failure, we can "reclaim" the successor from the parent, unifying them such that the resulting bitmap describes all writes occurring since the last successful backup, for instance. Reclamation will thaw the parent, but not explicitly re-enable it. BdrvDirtyBitmap operations that target a single bitmap are protected by assertions that the bitmap is not frozen and/or disabled. BdrvDirtyBitmap operations that target a group of bitmaps, such as bdrv_{set,reset}_dirty will ignore frozen/disabled drives with a conditional instead. Internal functions that enable/disable dirty bitmaps have assertions added to them to prevent modifying frozen bitmaps. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1429314609-29776-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-removeJohn Snow
The new command pair is added to manage a user created dirty bitmap. The dirty bitmap's name is mandatory and must be unique for the same device, but different devices can have bitmaps with the same names. The granularity is an optional field. If it is not specified, we will choose a default granularity based on the cluster size if available, clamped to between 4K and 64K to mirror how the 'mirror' code was already choosing granularity. If we do not have cluster size info available, we choose 64K. This code has been factored out into a helper shared with block/mirror. This patch also introduces the 'block_dirty_bitmap_lookup' helper, which takes a device name and a dirty bitmap name and validates the lookup, returning NULL and setting errp if there is a problem with either field. This helper will be re-used in future patches in this series. The types added to block-core.json will be re-used in future patches in this series, see: 'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}' Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1429314609-29776-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: fill in the image field in BlockDeviceInfoAlberto Garcia
The image field in BlockDeviceInfo is supposed to contain an ImageInfo object. However that is being filled in by bdrv_query_info(), not by bdrv_block_device_info(), which is where BlockDeviceInfo is actually created. Anyone calling bdrv_block_device_info() directly will get a null image field. As a consequence of this, the HMP command 'info block -n -v' crashes QEMU. This patch moves the code that fills in that field from bdrv_query_info() to bdrv_block_device_info(). Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 1429271563-3765-1-git-send-email-berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28block: use bdrv_get_device_or_node_name() in error messagesAlberto Garcia
There are several error messages that identify a BlockDriverState by its device name. However those errors can be produced in nodes that don't have a device name associated. In those cases we should use bdrv_get_device_or_node_name() to fall back to the node name and produce a more meaningful message. The messages are also updated to use the more generic term 'node' instead of 'device'. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 9823a1f0514fdb0692e92868661c38a9e00a12d6.1428485266.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28blockjob: Allow nested pauseFam Zheng
This patch changes block_job_pause to increase the pause counter and block_job_resume to decrease it. The counter will allow calling block_job_pause/block_job_resume unconditionally on a job when we need to suspend the IO temporarily. From now on, each block_job_resume must be paired with a block_job_pause to keep the counter balanced. The user pause from QMP or HMP will only trigger block_job_pause once until it's resumed, this is achieved by adding a user_paused flag in BlockJob. One occurrence of block_job_resume in mirror_complete is replaced with block_job_enter which does what is necessary. In block_job_cancel, the cancel flag is good enough to instruct coroutines to quit loop, so use block_job_enter to replace the unpaired block_job_resume. Upon block job IO error, user is notified about the entering to the pause state, so this pause belongs to user pause, set the flag accordingly and expect a matching QMP resume. [Extended doc comments as suggested by Paolo Bonzini <pbonzini@redhat.com>. --Stefan] Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1428069921-2957-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-19block: Fix blockdev-backup not to use funky error classMarkus Armbruster
Error classes are a leftover from the days of "rich" error objects. New code should always use ERROR_CLASS_GENERIC_ERROR. Commit b7b9d39..7c6a4ab added uses of ERROR_CLASS_DEVICE_NOT_FOUND. Replace them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-16blockdev: Convert bdrv_find to blk_by_nameFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1425296209-1476-4-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-02-26block: Simplify setting numeric optionsMarkus Armbruster
Don't convert numbers to strings for use with qemu_opt_set(), simply use qemu_opt_set_number() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix useMarkus Armbruster
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the error with qerror_report_err(). Most of its users assume the function can't fail. Make them use qemu_opt_set_err() with &error_abort, so that should the assumption ever break, it'll break noisily. Just two users remain, in util/qemu-config.c. Switch them to qemu_opt_set_err() as well, then rename qemu_opt_set_err() to qemu_opt_set(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26QemuOpts: Convert qemu_opt_set_bool() to Error, fix its useMarkus Armbruster
Return the Error object instead of reporting it with qerror_report_err(). Change callers that assume the function can't fail to pass &error_abort, so that should the assumption ever break, it'll break noisily. Turns out all callers outside its unit test assume that. We could drop the Error ** argument, but that would make the interface less regular, so don't. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-18' ↵Peter Maydell
into staging Clean up around error_get_pretty(), qerror_report_err() # gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-02-18: qemu-char: Avoid qerror_report_err() outside QMP command handlers qemu-img: Avoid qerror_report_err() outside QMP command handlers vl: Avoid qerror_report_err() outside QMP command handlers tpm: Avoid qerror_report_err() outside QMP command handlers numa: Avoid qerror_report_err() outside QMP command handlers net: Avoid qerror_report_err() outside QMP command handlers monitor: Avoid qerror_report_err() outside QMP command handlers monitor: Clean up around monitor_handle_fd_param() error: Use error_report_err() where appropriate error: New convenience function error_report_err() vhost-scsi: Improve error reporting for invalid vhostfd Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-25Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-02-18' ↵Peter Maydell
into staging hmp: Normalize HMP command handler names # gpg: Signature made Wed Feb 18 10:59:44 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-monitor-2015-02-18: hmp: Name HMP info handler functions hmp_info_SUBCOMMAND() hmp: Name HMP command handler functions hmp_COMMAND() hmp: Clean up declarations for long-gone info handlers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-18hmp: Name HMP command handler functions hmp_COMMAND()Markus Armbruster
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(), and sometimes COMMAND pointlessly differs in spelling. Normalize to hmp_COMMAND(), where COMMAND is exactly the command name with '-' replaced by '_'. Exceptions: * do_device_add() and client_migrate_info() *not* renamed to hmp_device_add(), hmp_client_migrate_info(), because they're also QMP handlers. They still need to be converted to QAPI. * do_memory_dump(), do_physical_memory_dump(), do_ioport_read(), do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(), hmp_i(), hmp_o(), because those names are too cryptic for my taste. * do_info_help() renamed to hmp_info_help() instead of hmp_info(), because it only covers help. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18error: Use error_report_err() where appropriateMarkus Armbruster
Coccinelle semantic patch: @@ expression E; @@ - error_report("%s", error_get_pretty(E)); - error_free(E); + error_report_err(E); @@ expression E, S; @@ - error_report("%s", error_get_pretty(E)); + error_report_err(E); ( exit(S); | abort(); ) Trivial manual touch-ups in block/sheepdog.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-16blockdev: Use blk_new_open() in blockdev_init()Max Reitz
Due to different error propagation, this breaks tests 051 and 087; fix their output. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1423162705-32065-6-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06block: New bdrv_add_key(), convert monitor to use itMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1422524221-8566-4-git-send-email-armbru@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-02-06blockdev: Eliminate silly QERR_BLOCK_JOB_NOT_ACTIVE macroMarkus Armbruster
The QERR_ macros are leftovers from the days of "rich" error objects. They're used with error_set() and qerror_report(), and expand into the first *two* arguments. This trickiness has become pointless. Clean this one up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1422524221-8566-3-git-send-email-armbru@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-02-06blockdev: Give find_block_job() an Error ** parameterMarkus Armbruster
When find_block_job() fails, all its callers build the same Error object. Build it in find_block_job() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1422524221-8566-2-git-send-email-armbru@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-01-13block: Split BLOCK_OP_TYPE_COMMIT to BLOCK_OP_TYPE_COMMIT_{SOURCE, TARGET}Fam Zheng
Like BLOCK_OP_TYPE_BACKUP_SOURCE and BLOCK_OP_TYPE_BACKUP_TARGET, block-commit involves two asymmetric devices. This change is not user-visible (yet), because commit only works with device names. But once we enable backing reference in blockdev-add, or specifying node-name in block-commit command, we don't want the user to start two commit jobs on the same backing chain, which will corrupt things because of the final bdrv_swap. Before we have per category blockers, splitting this type is still better. [Resolved virtio-blk dataplane conflict by replacing BLOCK_OP_TYPE_COMMIT with both BLOCK_OP_TYPE_COMMIT_{SOURCE, TARGET}. They are safe since the block job runs in the same AioContext as the dataplane IOThread. --Stefan] Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-01-13block: Add blockdev-backup to transactionFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1418899027-8445-4-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-01-13qmp: Add command 'blockdev-backup'Fam Zheng
Similar to drive-backup, but this command uses a device id as target instead of creating/opening an image file. Also add blocker on target bs, since the target is also a named device now. Add check and report error for bs == target which became possible but is an illegal case with introduction of blockdev-backup. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1418899027-8445-3-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2014-12-10blockdev: check for BLOCK_OP_TYPE_INTERNAL_SNAPSHOTStefan Hajnoczi
The BLOCK_OP_TYPE_INTERNAL_SNAPSHOT op blocker exists but was never used! Let's fix that so internal snapshots can be blocked. [Fixed s/external/internal/ typo as pointed out by Paolo Bonzini and Max Reitz. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416566940-4430-5-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: acquire AioContext in QMP 'transaction' actionsStefan Hajnoczi
The transaction QMP command performs operations atomically on a group of drives. This command needs to acquire AioContext in order to work safely when virtio-blk dataplane IOThreads are accessing drives. The transactional nature of the command means that actions are split into prepare, commit, abort, and clean functions. Acquire the AioContext in prepare and don't release it until one of the other functions is called. This prevents the IOThread from running the AioContext before the transaction has completed. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416566940-4430-4-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: drop unnecessary DriveBackupState field assignmentStefan Hajnoczi
drive_backup_prepare() assigns DriveBackupState fields to NULL in the error path. This is unnecessary because the DriveBackupState is allocated using g_malloc0() and other functions like external_snapshot_prepare() already rely on this. Do not explicitly assign fields to NULL so that the error path is concise and does not require modification when fields are added to DriveBackupState. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416566940-4430-3-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: update outdated qmp_transaction() commentsStefan Hajnoczi
Originally the transaction QMP command was just for taking snapshots. The command became more general when drive-backup and abort were added. It is more accurate to say the command is about performing operations on an atomic group than to say it is about snapshots. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416566940-4430-2-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: acquire AioContext in change-backing-fileStefan Hajnoczi
Add dataplane support to the change-backing-file QMP commands. By acquiring the AioContext we avoid race conditions with the dataplane thread which may also be accessing the BlockDriverState. Note that this command operates on both bs and a node in its chain (image_bs). The bdrv_chain_contains(bs, image_bs) check guarantees that bs and image_bs are in the same AioContext. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: acquire AioContext in eject, change, and block_passwdStefan Hajnoczi
By acquiring the AioContext we avoid race conditions with the dataplane thread which may also be accessing the BlockDriverState. Fix up eject, change, and block_passwd in a single patch because qmp_eject() and qmp_change_blockdev() both call eject_device(). Also fix block_passwd while we're tackling a command that takes a block encryption password. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: check for BLOCK_OP_TYPE_INTERNAL_SNAPSHOT_DELETEStefan Hajnoczi
The BLOCK_OP_TYPE_INTERNAL_SNAPSHOT_DELETE op blocker exists but was never used! Let's fix that so snapshot delete can be blocked. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: acquire AioContext in blockdev-snapshot-delete-internal-syncStefan Hajnoczi
Add dataplane support to the blockdev-snapshot-delete-internal-sync QMP command. By acquiring the AioContext we avoid race conditions with the dataplane thread which may also be accessing the BlockDriverState. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-03block: let commit blockjob run in BDS AioContextStefan Hajnoczi
The commit block job must run in the BlockDriverState AioContext so that it works with dataplane. Acquire the AioContext in blockdev.c so starting the block job is safe. One detail here is that the bdrv_drain_all() must be moved inside the aio_context_acquire() region so requests cannot sneak in between the drain and acquire. The completion code in block/commit.c must perform backing chain manipulation and bdrv_reopen() from the main loop. Use block_job_defer_to_main_loop() to achieve that. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-11-git-send-email-stefanha@redhat.com
2014-11-03block: let mirror blockjob run in BDS AioContextStefan Hajnoczi
The mirror block job must run in the BlockDriverState AioContext so that it works with dataplane. Acquire the AioContext in blockdev.c so starting the block job is safe. Note that to_replace is treated separately from other BlockDriverStates in that it does not need to be in the same AioContext. Explicitly acquire/release to_replace's AioContext when accessing it. The completion code in block/mirror.c must perform BDS graph manipulation and bdrv_reopen() from the main loop. Use block_job_defer_to_main_loop() to achieve that. The bdrv_drain_all() call is not allowed outside the main loop since it could lead to lock ordering problems. Use bdrv_drain(bs) instead because we have acquired the AioContext so nothing else can sneak in I/O. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-10-git-send-email-stefanha@redhat.com
2014-11-03block: let stream blockjob run in BDS AioContextStefan Hajnoczi
The stream block job must run in the BlockDriverState AioContext so that it works with dataplane. The basics of acquiring the AioContext are easy in blockdev.c. The tricky part is the completion code which drops part of the backing file chain. This must be done in the main loop where bdrv_unref() and bdrv_close() are safe to call. Use block_job_defer_to_main_loop() to achieve that. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-9-git-send-email-stefanha@redhat.com
2014-11-03block: let backup blockjob run in BDS AioContextStefan Hajnoczi
The backup block job must run in the BlockDriverState AioContext so that it works with dataplane. The basics of acquiring the AioContext are easy in blockdev.c. The completion code in block/backup.c must call bdrv_unref() from the main loop. Use block_job_defer_to_main_loop() to achieve that. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-8-git-send-email-stefanha@redhat.com
2014-11-03blockdev: add note that block_job_cb() must be thread-safeStefan Hajnoczi
This function is correct but we should document the constraint that everything must be thread-safe. Emitting QMP events and scheduling BHs are both thread-safe so nothing needs to be done here. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-5-git-send-email-stefanha@redhat.com
2014-11-03blockdev: acquire AioContext in blockdev_mark_auto_del()Stefan Hajnoczi
When an emulated storage controller is unrealized it will call blockdev_mark_auto_del(). This will cancel any running block job (and that eventually releases its reference to the BDS so it can be freed). Since the block job may be executing in another AioContext we must acquire/release to ensure thread safety. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-4-git-send-email-stefanha@redhat.com
2014-11-03blockdev: acquire AioContext in do_qmp_query_block_jobs_one()Stefan Hajnoczi
Make sure that query-block-jobs acquires the BlockDriverState AioContext so that the blockjob isn't running in another thread while we access its state. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-3-git-send-email-stefanha@redhat.com
2014-11-03block: acquire AioContext in generic blockjob QMP commandsStefan Hajnoczi
block-job-set-speed, block-job-cancel, block-job-pause, block-job-resume, and block-job-complete must acquire the BlockDriverState AioContext so that it is safe to access bs. At the moment bs->job is always NULL when dataplane is active because op blockers prevent blockjobs from starting. Once the rest of the blockjob API has been made aware of AioContext we can drop the op blocker. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-2-git-send-email-stefanha@redhat.com
2014-10-20block: Lift device model API into BlockBackendMarkus Armbruster
Move device model attachment / detachment and the BlockDevOps device model callbacks and their wrappers from BlockDriverState to BlockBackend. Wrapper calls in block.c change from bdrv_dev_FOO_cb(bs, ...) to if (bs->blk) { bdrv_dev_FOO_cb(bs->blk, ...); } No change, because both bdrv_dev_change_media_cb() and bdrv_dev_resize_cb() do nothing when no device model is attached, and a device model can be attached only when bs->blk. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20blockdev: Convert qmp_eject(), qmp_change_blockdev() to BlockBackendMarkus Armbruster
Much more command code needs conversion. I'm converting these now because they're using bdrv_dev_* functions, which I'm about to lift into BlockBackend. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20blockdev: Fix blockdev-add not to create DriveInfoMarkus Armbruster
blockdev_init() always creates a DriveInfo, but only drive_new() fills it in. qmp_blockdev_add() leaves it blank. This results in a drive with type = IF_IDE, bus = 0, unit = 0. Screwed up in commit ee13ed1c. Board initialization code looking for IDE drive (0,0) can pick up one of these bogus drives. The QMP command has to execute really early to be visible. Not sure how likely that is in practice. Fix by creating DriveInfo in drive_new(). Block backends created by blockdev-add don't get one. Breaks the test for "has been created by qmp_blockdev_add()" in blockdev_mark_auto_del() and do_drive_del(), because it changes the value of dinfo && !dinfo->enable_auto_del from true to false. Simply test !dinfo instead. Leaves DriveInfo member enable_auto_del unused. Drop it. A few places assume a block backend always has a DriveInfo. Fix them up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20blockdev: Drop superfluous DriveInfo member idMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()Markus Armbruster
The patch is big, but all it really does is replacing dinfo->bdrv by blk_bs(blk_by_legacy_dinfo(dinfo)) The replacement is repetitive, but the conversion of device models to BlockBackend is imminent, and will shorten it to just blk_legacy_dinfo(dinfo). Line wrapping muddies the waters a bit. I also omit tests whether dinfo->bdrv is null, because it never is. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate bdrv_iterate(), use bdrv_next()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20blockdev: Eliminate drive_del()Markus Armbruster
drive_del() has become a trivial wrapper around blk_unref(). Get rid of it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Make BlockBackend own its BlockDriverStateMarkus Armbruster
On BlockBackend destruction, unref its BlockDriverState. Replaces the callers' unrefs. This turns the pointer from BlockBackend to BlockDriverState into a strong reference, managed with bdrv_ref() / bdrv_unref(). The back-pointer remains weak. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Code motion to get rid of stubs/blockdev.cMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 19:35:31 +0000