| Age | Commit message (Collapse) | Author |
|---|
|
No users of bdrv_get_type_hint() left. bdrv_set_type_hint() can make
the media removable by side effect. Make that explicit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device. Unlike
DriveInfo, BlockDriverState should be about the host part only.
One of the remaining guest bits there is the "type hint". -drive
option media sets it, and qdevs "ide-drive", "scsi-disk" and non-qdev
IF_XEN devices check it to pick HD vs. CD.
Communicate -drive option media via new DriveInfo member media_cd
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When removing a drive from the host-side via drive_del we currently have
the following path:
drive_del
qemu_aio_flush()
bdrv_close() // zaps bs->drv, which makes any subsequent I/O get
// dropped. Works as designed
drive_uninit()
bdrv_delete() // frees the bs. Since the device is still connected to
// bs, any subsequent I/O is a use-after-free.
The value of bs->drv becomes unpredictable on free. As long as it
remains null, I/O still gets dropped, however it could become non-null
at any point after the free resulting SEGVs or other QEMU state
corruption.
To resolve this issue as simply as possible, we can chose to not
actually delete the BlockDriverState pointer. Since bdrv_close()
handles setting the drv pointer to NULL, we just need to remove the
BlockDriverState from the QLIST that is used to enumerate the block
devices. This is currently handled within bdrv_delete, so move this
into its own function, bdrv_make_anon().
The result is that we can now invoke drive_del, this closes the file
descriptors and sets BlockDriverState->drv to NULL which prevents futher
IO to the device, and since we do not free BlockDriverState, we don't
have to worry about the copy retained in the block devices.
We also don't attempt to remove the qdev property since we are no longer
deleting the BlockDriverState on drives with associated drives. This
also allows for removing Drives with no devices associated either.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We have two different virtio buses: pci and s390. The abstraction path
taken in qemu is to have generic aliases for each device type in the
architecture specific qdev devices.
So let's make use of these aliases whenever we can and define them
whenever we can.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
In case we cannot open the newly created snapshot image, try to fall
back to the original image file and continue running on that, which
should prevent the guest from aborting.
This is a corner case which can happen if the admin by mistake
specifies the snapshot file on a virtual file system which does not
support O_DIRECT. bdrv_create() does not use O_DIRECT, but the
following open in bdrv_open() does and will then fail.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Should have spotted this when doing commit 319ae529.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Started leaking in commit 1dae12e6.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Set block device in use during block migration, disallow drive_del and
bdrv_truncate for in use devices.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The host part of a block device can be deleted with in progress
block migration.
To fix this, add a reference count to DriveInfo, freeing resources
on last reference.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Watch this:
(qemu) drive_add 0 if=none
(qemu) info block
none0: type=hd removable=0 [not inserted]
(qemu) drive_del none0
Segmentation fault (core dumped)
add_init_drive() is confused about drive_init()'s failure modes, and
cleans up when it shouldn't. This leaves the DriveInfo with member
opts dangling. drive_del attempts to free it, and dies.
drive_init() behaves as follows:
* If it created a drive with media, it returns its DriveInfo.
* If it created a drive without media, it clears *fatal_error and
returns NULL.
* If it couldn't create a drive, it sets *fatal_error and returns
NULL.
Of its three callers:
* drive_init_func() is correct.
* usb_msd_init() assumes drive_init() failed when it returns NULL.
This is correct only because it always passes option "file", and
"drive without media" can't happen then.
* add_init_drive() assumes drive_init() failed when it returns NULL.
This is incorrect.
Clean up drive_init() to return NULL on failure and only on failure.
Drop its parameter fatal_error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Let the callers build the optstr. Only one wants to. All the others
become simpler, because they don't have to worry about escaping '%'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We silently ignore multiple definitions for the same drive:
$ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=ide,index=1,file=tmp.qcow2 -drive if=ide,index=1,file=nonexistant
QEMU 0.13.50 monitor - type 'help' for more information
(qemu) info block
ide0-hd1: type=hd removable=0 file=tmp.qcow2 backing_file=tmp.img ro=0 drv=qcow2 encrypted=0
With if=none, this can become quite confusing:
$ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=none,index=1,file=tmp.qcow2,id=eins -drive if=none,index=1,file=nonexistant,id=zwei -device ide-drive,drive=eins -device ide-drive,drive=zwei
qemu-system-x86_64: -device ide-drive,drive=zwei: Property 'ide-drive.drive' can't find value 'zwei'
The second -device fails, because it refers to drive zwei, which got
silently ignored.
Make multiple drive definitions fail cleanly.
Unfortunately, there's code that relies on multiple drive definitions
being silently ignored: main() merrily adds default drives even when
the user already defined these drives. Fix that up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Before, type & index were hidden in printf-like fmt, ... parameters,
which get expanded into an option string. Rather inconvenient for
uses later in this series.
New IF_DEFAULT to ask for the machine's default interface. Before,
that was done by having no option "if" in the option string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Before commit 622b520f, index=12 meant bus=1,unit=5.
Since the commit, it means bus=0,unit=12. The drive is created, but
not the guest device. That's because the controllers we use with
if=scsi drives (lsi53c895a and esp) support only 7 units, and
scsi_bus_legacy_handle_cmdline() ignores drives with unit numbers
exceeding that limit.
Changing the mapping of index to bus, unit is a regression. Breaking
-drive invocations that used to work just makes it worse.
Revert the part of commit 622b520f that causes this, and clean up
some.
Note that the fix only affects if=scsi. You can still put more than 7
units on a SCSI bus with -device & friends.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Turns drive_init()'s lengthy conditional into a concise loop, and
makes the data available elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qdev_init_bdrv() doesn't belong into qdev.c; it's about drives, not
qdevs. Rename to drive_get_next, move to blockdev.c, drop the bogus
DeviceState argument, and return DriveInfo instead of
BlockDriverState.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add a monitor command that allows resizing of block devices while
qemu is running. It uses the existing bdrv_truncate method already
used by qemu-img to do it's work. Compared to qemu-img the size
parsing is very simplicistic, but I think having a properly numering
object is more useful for non-humand monitor users than having
the units and relative resize parsing.
For SCSI devices the new size can be updated in Linux guests by
doing the following shell command:
echo > /sys/class/scsi_device/0:0:0:0/device/rescan
For ATA devices I don't know of a way to update the block device
size in Linux system, and for virtio-blk the next two patches
will provide an automatic update of the size when this command
is issued on the host.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Watch this:
(qemu) drive_add 0 if=none,file=tmp.img
OK
(qemu) info block
none0: type=hd removable=0 file=tmp.img ro=0 drv=raw encrypted=0
(qemu) drive_del none0
Segmentation fault (core dumped)
do_drive_del()'s code to clean up the pointer from a qdev using the
drive back to the drive needs to check whether such a device exists.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This makes the errors point to the error location, and fixes drive_add
to report errors in the monitor instead of stderr.
While there, tweak a few error messages for consistency.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When cyls, heads or secs are out of range, the error message prints
buf, which points to the value of option "if". Bogus, may even be
null. Drop that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Current code does not support snapshot internally to the running
image. Error in case no snapshot_file is specified.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The monitor command is:
snapshot_blkdev <device> [snapshot-file] [format]
Default format is qcow2. For now snapshots without a snapshot-file, eg
internal snapshots, are not supported.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If a user decides to punish a guest by revoking its block device via
drive_del, and subsequently also attempts to remove the pci device
backing it, and the device is using blockdev_auto_del() then we get a
segfault when we attempt to access dinfo->auto_del.[1]
The fix is to check if drive_get_by_blockdev() actually returns a valid
dinfo pointer or not.
1. (qemu) pci_add auto storage file=images/test01.raw,if=virtio,id=block1,snapshot=on
(qemu) drive_del block1
(qemu) pci_del 5
*segfault*
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Currently device hotplug removal code is tied to device removal via
ACPI. All pci devices that are removable via device_del() require the
guest to respond to the request. In some cases the guest may not
respond leaving the device still accessible to the guest. The management
layer doesn't currently have a reliable way to revoke access to host
resource in the presence of an uncooperative guest.
This patch implements a new monitor command, drive_del, which
provides an explicit command to revoke access to a host block device.
drive_del first quiesces the block device (qemu_aio_flush;
bdrv_flush() and bdrv_close()). This prevents further IO from being
submitted against the host device. Finally, drive_del cleans up
pointers between the drive object (host resource) and the device
object (guest resource).
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This implements the rerror option for SCSI disks.
It also includes minor changes to the write path where the same code is used
that was criticized in the review for the changes to the read path required for
rerror support.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Block device change command did not copy BDRV_O_SNAPSHOT flag. Thus
the new image did not have this flag and the file got deleted during
opening.
Fix by copying BDRV_O_SNAPSHOT flag.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since commit cb4e5f8e, monitor command change makes the new media
readonly iff the type hint is BDRV_TYPE_CDROM, i.e. the drive was
created with media=cdrom. The intention is to avoid changing a block
device's read-only-ness. However, BDRV_TYPE_CDROM is only a hint. It
is currently sufficent for read-only. But it's not necessary, and it
may not remain sufficient.
Use bdrv_is_read_only() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We automatically delete blockdev host parts on unplug of the guest
device. Too much magic, but we can't change that now.
The delete happens early in the guest device teardown, before the
connection to the host part is severed. Thus, the guest part's
pointer to the host part dangles for a brief time. No actual harm
comes from this, but we'll catch such dangling pointers a few commits
down the road. Clean up the dangling pointers by delaying the
automatic deletion until the guest part's pointer is gone.
Device usb-storage deliberately makes two qdev properties refer to the
same drive, because it automatically creates a second device. Again,
too much magic we can't change now. Multiple references worked okay
before, but now free_drive() dies for the second one. Zap the extra
reference.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Unused since commit 6ced55a5.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Historically, user monitor arguments beginning with '-' (eg. '-f')
were passed as integers down to handlers.
I've maintained this behavior in the new monitor because we didn't
have a boolean type at the very beginning of QMP. Today we have it
and this behavior is causing trouble to QMP's argument checker.
This commit fixes the problem by doing the following changes:
1. User Monitor
Before: the optional arg was represented as a QInt, we'd pass 1
down to handlers if the user specified the argument or
0 otherwise
This commit: the optional arg is represented as a QBool, we pass
true down to handlers if the user specified the
argument, otherwise _nothing_ is passed
2. QMP
Before: the client was required to pass the arg as QBool, but we'd
convert it to QInt internally. If the argument wasn't passed,
we'd pass 0 down
This commit: still require a QBool, but doesn't do any conversion and
doesn't pass any default value
3. Convert existing handlers (do_eject()/do_migrate()) to the new way
Before: Both handlers would expect a QInt value, either 0 or 1
This commit: Change the handlers to accept a QBool, they handle the
following cases:
A) true is passed: the option is enabled
B) false is passed: the option is disabled
C) nothing is passed: option not specified, use
default behavior
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
This changes the monitor eject_device() function to not check for
bdrv_is_inserted().
Example run where the bug manifests itself:
(output of 'info block' is stripped to include only the CD-ROM device)
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 [not inserted]
(qemu) change ide1-cd0 /dev/cdrom host_cdrom
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/cdrom ro=1 drv=host_cdrom encrypted=0
(qemu) eject ide1-cd0
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/cdrom ro=1 drv=host_cdrom encrypted=0
# at this point, a disk was inserted on the host CD-ROM drive
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/cdrom ro=1 drv=host_cdrom encrypted=0
(qemu) eject ide1-cd0
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 [not inserted]
(qemu)
The first eject command didn't work because the is_inserted() check
failed.
I have no clue why the code had the is_inserted() check, as it doesn't matter
if there is a disk present at the host drive, when the user wants the virtual
device to be disconnected from the host device.
The is_inserted() check has another side effect: a memory leak if the "change"
command is used multiple times, as do_change() calls eject_device() before
re-opening the block device, but bdrv_close() is never called.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is the list of drives defined with drive_init(). Hide it, so it
doesn't get abused.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
do_commit() and mux_proc_byte() iterate over the list of drives
defined with drive_init(). This misses host block devices defined by
other means. Such means don't exist now, but will be introduced later
in this series.
Change them to use new bdrv_commit_all(), which iterates over all host
block devices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
That's where they belong semantically (block device host part), even
though the actions are actually executed by guest device code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Empty file used to create an empty drive (no media). Since commit
9dfd7c7a, it's an error: "qemu: could not open disk image : No such
file or directory". Older versions of libvirt can choke on this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We should use 'dinfo->serial' length, 'serial' is a pointer, so
the serial number length is currently limited to the pointer size.
This fixes https://bugs.launchpad.net/qemu/+bug/584143 and is also
valid for stable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Anything that moves hundreds of lines out of vl.c can't be all bad.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
