aboutsummaryrefslogtreecommitdiff
path: root/blockdev.c
AgeCommit message (Collapse)Author
2016-03-05qapi: Avoid use of 'data' member of QAPI unionsEric Blake
QAPI code generators currently create a 'void *data' member as part of the anonymous union embedded in the C struct corresponding to a QAPI union. However, directly assigning to this member of the union feels a bit fishy, when we can assign to another member of the struct instead. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1457021813-10704-9-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-22blockdev: unset inappropriate flags when changing mediumAlyssa Milburn
Most importantly, this removes BDRV_O_TEMPORARY, to avoid unlink()ing an image which replaces a snapshotted one. Signed-off-by: Alyssa Milburn <fuzzie@fuzzie.org> Message-id: 20160206133618.GA16635@li141-249.members.linode.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-22qapi: Add burst length parameters to block_set_io_throttleAlberto Garcia
This patch adds the new bps_*_max_length and iops_*_max_length parameters to the block_set_io_throttle command. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Add command-line settings to define the burst periodsAlberto Garcia
This patch adds all the throttling.*-max-length command-line parameters to define the length of the burst periods. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Use throttle_config_init() to initialize ThrottleConfigAlberto Garcia
We can currently initialize ThrottleConfig by zeroing all its fields, but this will change with the new fields to define the length of the burst periods. This patch introduces a new throttle_config_init() function and uses it to replace all memset() calls that initialize ThrottleConfig directly. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Merge all functions that check the configuration into oneAlberto Garcia
There's no need to keep throttle_conflicting(), throttle_is_valid() and throttle_max_is_missing_limit() as separate functions, so this patch merges all three into one. As a consequence, check_throttle_config() becomes redundant and can be replaced with throttle_is_valid(). Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Make throttle_is_valid() set errpAlberto Garcia
The caller does not need to set it, and this will allow us to refactor this function later. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Make throttle_max_is_missing_limit() set errpAlberto Garcia
The caller does not need to set it, and this will allow us to refactor this function later. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Make throttle_conflicting() set errpAlberto Garcia
The caller does not need to set it, and this will allow us to refactor this function later. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22block: Fix -incoming with snapshot=onKevin Wolf
The BDRV_O_INACTIVE flag should only be set for images explicitly opened by the user. snapshot=on needs to create a new qcow2 image and write some metadata to it. This is not a problem because it can't come from the source, so there's no reason to mark it as BDRV_O_INACTIVE, even though it is opened while waiting for the migration to complete. This fixes an assertion failure when -incoming and snapshot=on are combined. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-04all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-02block: set device_list.tqe_prev to NULL on BDS removalJeff Cody
This fixes a regression introduced with commit 3f09bfbc7. Multiple bugs arise in conjunction with live snapshots and mirroring operations (which include active layer commit). After a live snapshot occurs, the active layer and the base layer both have a non-NULL tqe_prev field in the device_list, although the base node's tqe_prev field points to a NULL entry. This non-NULL tqe_prev field occurs after the bdrv_append() in the external snapshot calls change_parent_backing_link(). In change_parent_backing_link(), when the previous active layer is removed from device_list, the device_list.tqe_prev pointer is not set to NULL. The operating scheme in the block layer is to indicate that a BDS belongs in the bdrv_states device_list iff the device_list.tqe_prev pointer is non-NULL. This patch does two things: 1.) Introduces a new block layer helper bdrv_device_remove() to remove a BDS from the device_list, and 2.) uses that new API, which also fixes the regression once used in change_parent_backing_link(). Signed-off-by: Jeff Cody <jcody@redhat.com> Message-id: 0cd51e11c0666c04ddb7c05293fe94afeb551e89.1454376655.git.jcody@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02blockdev: Keep track of monitor-owned BDSMax Reitz
As a side effect, we can now make x-blockdev-del's check whether a BDS is actually owned by the monitor explicit. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02blockdev: Use blk_remove_bs() in do_drive_del()Max Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02blockdev: Fix 'change' for slot devicesMax Reitz
'change' and related operations did not work when used on guest devices featuring removable media but no actual tray, because blk_dev_is_tray_open() always returned false for them and the blockdev-{insert,remove}-medium commands required it to return true. Fix this by making blockdev-{insert,remove}-medium work on tray-less devices. Also, blockdev-{open,close}-tray are now explicitly no-ops when invoked on such devices, and blk_dev_change_media_cb() is instead called by blockdev-{insert,remove}-medium (for tray-less devices only). Reported-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1454096953-31773-3-git-send-email-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20blockdev: Error out on negative throttling option valuesFam Zheng
extract_common_blockdev_options() uses qemu_opt_get_number() to parse the bps/iops numbers to uint64_t, then converts to double and stores in ThrottleConfig. The actual parsing is done by strtoull() in parse_option_number(). Negative numbers are wrapped to large positive ones, and stored. We used to reject negative numbers since 7d81c1413c9, but this regressed when the option parsing code was changed later. Now fix this again. This time, define an arbitrary large upper limit (1e15), and check the values so both negative and impractically big numbers are caught and reported. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-13error: Use error_reportf_err() where it makes obvious senseMarkus Armbruster
Done with this Coccinelle semantic patch @@ expression FMT, E, S; expression list ARGS; @@ - error_report(FMT, ARGS, error_get_pretty(E)); + error_reportf_err(E, FMT/*@@@*/, ARGS); ( - error_free(E); | exit(S); | abort(); ) followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings. We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-07qmp: Add blockdev-mirror commandFam Zheng
This will start a mirror job from a named device to another named device, its relation with drive-mirror is similar with blockdev-backup to drive-backup. In blockdev-mirror, the target node should be prepared by blockdev-add, which will be responsible for assigning a name to the new node, so we don't have 'node-name' parameter. Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-id: 1450932306-13717-5-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07block: Add check on mirror targetFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1450932306-13717-4-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07block: Extract blockdev part of qmp_drive_mirrorFam Zheng
This is the part that will be reused by blockdev-mirror. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1450932306-13717-3-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07block: Rename BLOCK_OP_TYPE_MIRROR to BLOCK_OP_TYPE_MIRROR_SOURCEFam Zheng
It's necessary to distinguish source and target before we can add blockdev-mirror, because we would want a concrete type of operation to check on target bs before starting. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1450932306-13717-2-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Move cache options into options QDictKevin Wolf
This adds the cache mode options to the QDict, so that they can be specified for child nodes (e.g. backing.cache.direct=off). The cache modes are not removed from the flags at this point; instead, options and flags are kept in sync. If the user specifies both flags and options, the options take precedence. Child node inherit cache modes as options now, they don't use flags any more. Note that this forbids specifying the cache mode for empty drives. It didn't make sense anyway to specify it there, because it didn't have any effect. blockdev_init() considers the cache options now bdrv_open() options and therefore doesn't create an empty drive any more but calls into bdrv_open(). This in turn will fail with no driver and filename specified. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18blockdev: Set 'format' indicates non-empty driveKevin Wolf
Creating an empty drive while specifying 'format' doesn't make sense. The specified format driver would simply be ignored. Make a set 'format' option an indication that a non-empty drive should be created. This makes 'format' consistent with 'driver' and allows using it with a block driver that doesn't need any other options (like null-co/null-aio). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-11blockdev: Mark {insert, remove}-medium experimentalMax Reitz
While in the long term we want throttling to be its own block filter BDS, in the short term we want it to be part of the BB instead of a BDS; even in the long term we may want legacy throttling to be automatically tied to the BB. blockdev-insert-medium and blockdev-remove-medium do not retain throttling information in the BB (deliberately so). Therefore, using them means tying this information to a BDS, which would break the model described above. (The same applies to other flags such as detect_zeroes.) We probably want to move this information to the BB or its own filter BDS before blockdev-{insert,remove}-medium can be considered completely stable. Therefore, mark these functions experimental for the time being. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1449847385-13986-2-git-send-email-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> [PMM: fixed format nit (underlining) in qmp-commands.hx] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-18block: Call external_snapshot_clean after blockdev-snapshotAlberto Garcia
Otherwise the AioContext will never be released. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 1447419624-21918-1-git-send-email-berto@igalia.com Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-11-18blockdev: Add missing bdrv_unref() in drive-backupMax Reitz
All error paths after a successful bdrv_open() of target_bs should contain a bdrv_unref(target_bs). This one did not yet, so add it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-17block: make 'stats-interval' an array of ints instead of a stringAlberto Garcia
This is the natural JSON representation and prevents us from having to decode the list manually. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 0e3da8fa206f4ab534ae3ce6086e75fe84f1557e.1447665472.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-11-12block: New option to define the intervals for collecting I/O statisticsAlberto Garcia
The BlockAcctStats structure contains a list of BlockAcctTimedStats. Each one of these collects statistics about the minimum, maximum and average latencies of all I/O operations in a certain interval of time. This patch adds a new "stats-intervals" option that allows defining these intervals. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 41cbcd334a61c6157f0f495cdfd21eff6c156f2a.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Allow configuring whether to account failed and invalid opsAlberto Garcia
This patch adds two options, "stats-account-invalid" and "stats-account-failed", that can be used to decide whether invalid and failed I/O operations must be used when collecting statistics for latency and last access time. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: ebc7e5966511a342cad428a392c5f5ad56b15213.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: add transactional propertiesJohn Snow
Add both transactional properties to the QMP transactional interface, and add the BlockJobTxn that we create as a result of the err-cancel property to the BlkActionState structure. [split up from a patch originally by Stefan and Fam. --js] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Add BlockJobTxn support to backup_runJohn Snow
Allow a BlockJobTxn to be passed into backup_run, which will allow the job to join a transactional group if present. Propagate this new parameter outward into new QMP helper functions in blockdev.c to allow transaction commands to pass forward their BlockJobTxn object in a forthcoming patch. [split up from a patch originally by Stefan and Fam. --js] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12blockjob: Introduce reference count and fix reference to job->bsFam Zheng
Add reference count to block job, meanwhile move the ownership of the reference to job->bs from the caller (which is released in two completion callbacks) to the block job itself. It is necessary for block_job_complete_sync to work, because block job shouldn't live longer than its bs, as asserted in bdrv_delete. Now block_job_complete_sync can be simplified. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: rename BlkTransactionState and BdrvActionOpsJohn Snow
These structures are misnomers, somewhat. (1) BlockTransactionState is not state for a transaction, but is rather state for a single transaction action. Rename it "BlkActionState" to be more accurate. (2) The BdrvActionOps describes operations for the BlkActionState, above. This name might imply a 'BdrvAction' or a 'BdrvActionState', which there isn't. Rename this to 'BlkActionOps' to match 'BlkActionState'. Lastly, update the surrounding in-line documentation and comments to reflect the current nature of how Transactions operate. This patch changes only comments and names, and should not affect behavior in any way. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12qed: Implement .bdrv_drainFam Zheng
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the image header after a grace period once metadata update has finished. In compliance to the bdrv_drain semantics we should make sure it remains deleted once .bdrv_drain is called. We cannot reuse qed_need_check_timer_cb because here it doesn't satisfy the assertion. Do the "plug" and "flush" calls manually. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1447064214-29930-10-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11block: Add 'x-blockdev-del' QMP commandAlberto Garcia
This command is still experimental, hence the name. This is the companion to 'blockdev-add'. It allows deleting a BlockBackend with its associated BlockDriverState tree, or a BlockDriverState that is not attached to any backend. In either case, the command fails if the reference count is greater than 1 or the BlockDriverState has any parents. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 6cfc148c77aca1da942b094d811bfa3fcf7ac7bb.1446475331.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-11-11block: Disallow snapshots if the overlay doesn't support backing filesAlberto Garcia
This addresses scenarios like this one: { 'execute': 'blockdev-add', 'arguments': { 'options': { 'driver': 'qcow2', 'node-name': 'new0', 'file': { 'driver': 'file', 'filename': 'new.qcow2', 'node-name': 'file0' } } } } { 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay': 'file0' } } Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11throttle: Use bs->throttle_state instead of bs->io_limits_enabledAlberto Garcia
There are two ways to check for I/O limits in a BlockDriverState: - bs->throttle_state: if this pointer is not NULL, it means that this BDS is member of a throttling group, its ThrottleTimers structure has been initialized and its I/O limits are ready to be applied. - bs->io_limits_enabled: if true it means that the throttle_state pointer is valid _and_ the limits are currently enabled. The latter is used in several places to check whether a BDS has I/O limits configured, but what it really checks is whether requests are being throttled or not. For example, io_limits_enabled can be temporarily set to false in cases like bdrv_read_unthrottled() without otherwise touching the throtting configuration of that BDS. This patch replaces bs->io_limits_enabled with bs->throttle_state in all cases where what we really want to check is the existence of I/O limits, not whether they are currently enabled or not. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11block: add a 'blockdev-snapshot' QMP commandAlberto Garcia
One of the limitations of the 'blockdev-snapshot-sync' command is that it does not allow passing BlockdevOptions to the newly created snapshots, so they are always opened using the default values. Extending the command to allow passing options is not a practical solution because there is overlap between those options and some of the existing parameters of the command. This patch introduces a new 'blockdev-snapshot' command with a simpler interface: it just takes two references to existing block devices that will be used as the source and target for the snapshot. Since the main difference between the two commands is that one of them creates and opens the target image, while the other uses an already opened one, the bulk of the implementation is shared. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11block: rename BlockdevSnapshot to BlockdevSnapshotSyncAlberto Garcia
We will introduce the 'blockdev-snapshot' command that will require its own struct for the parameters, so we need to rename this one in order to avoid name clashes. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11block: check for existing device IDs in external_snapshot_prepare()Alberto Garcia
The 'snapshot-node-name' parameter of blockdev-snapshot-sync allows setting the node name of the image that is going to be created. Before creating the image, external_snapshot_prepare() checks that the name is not already being used. The check is however incomplete since it only considers existing node names, but node names must not clash with device IDs either because they share the same namespace. If the user attempts to create a snapshot using the name of an existing device for the 'snapshot-node-name' parameter the operation will eventually fail, but only after the new image has been created. This patch replaces bdrv_find_node() with bdrv_lookup_bs() to extend the check to existing device IDs, and thus detect possible name clashes before the new image is created. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11blockdev: read-only-mode for blockdev-change-mediumMax Reitz
Add an option to qmp_blockdev_change_medium() which allows changing the read-only status of the block device whose medium is changed. Some drives do not have a inherently fixed read-only status; for instance, floppy disks can be set read-only or writable independently of the drive. Some users may find it useful to be able to therefore change the read-only status of a block device when changing the medium. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11qmp: Introduce blockdev-change-mediumMax Reitz
Introduce a new QMP command 'blockdev-change-medium' which is intended to replace the 'change' command for block devices. The existing function qmp_change_blockdev() is accordingly renamed to qmp_blockdev_change_medium(). Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11blockdev: Implement change with basic operationsMax Reitz
Implement 'change' on block devices by calling blockdev-open-tray, blockdev-remove-medium, blockdev-insert-medium (a variation of that which does not need a node-name) and blockdev-close-tray. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11blockdev: Implement eject with basic operationsMax Reitz
Implement 'eject' by calling blockdev-open-tray and blockdev-remove-medium. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11blockdev: Add blockdev-insert-mediumMax Reitz
And a helper function for that, which directly takes a pointer to the BDS to be inserted instead of its node-name (which will be used for implementing 'change' using blockdev-insert-medium). Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11blockdev: Add blockdev-remove-mediumMax Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11blockdev: Add blockdev-close-trayMax Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11blockdev: Add blockdev-open-trayMax Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 07:54:17 +0000