aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)Author
2016-03-05util: Shorten references into SocketAddressEric Blake
An upcoming patch will alter how simple unions, like SocketAddress, are laid out, which will impact all lines of the form 'addr->u.XXX' (expanding it to the longer 'addr->u.XXX.data'). For better legibility in that patch, and less need for line wrapping, it's better to use a temporary variable to reduce the effect of a layout change to just the variable initializations, rather than every reference within a SocketAddress. Also, take advantage of some C99 initialization where it makes sense (simplifying g_new0() to g_new()). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1457021813-10704-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-29block/backup: avoid copying less than full target clustersJohn Snow
During incremental backups, if the target has a cluster size that is larger than the backup cluster size and we are backing up to a target that cannot (for whichever reason) pull clusters up from a backing image, we may inadvertantly create unusable incremental backup images. For example: If the bitmap tracks changes at a 64KB granularity and we transmit 64KB of data at a time but the target uses a 128KB cluster size, it is possible that only half of a target cluster will be recognized as dirty by the backup block job. When the cluster is allocated on the target image but only half populated with data, we lose the ability to distinguish between zero padding and uninitialized data. This does not happen if the target image has a backing file that points to the last known good backup. Even if we have a backing file, though, it's likely going to be faster to just buffer the redundant data ourselves from the live image than fetching it from the backing file, so let's just always round up to the target granularity. The same logic applies to backup modes top, none, and full. Copying fractional clusters without the guarantee of COW is dangerous, but even if we can rely on COW, it's likely better to just re-copy the data. Reported-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1456433911-24718-3-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29block/backup: make backup cluster size configurableJohn Snow
64K might not always be appropriate, make this a runtime value. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1456433911-24718-2-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29mirror: Add mirror_wait_for_ioFam Zheng
The three lines are duplicated a number of times now, refactor a function. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1454637630-10585-3-git-send-email-famz@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29mirror: Rewrite mirror_iterationFam Zheng
The "pnum < nb_sectors" condition in deciding whether to actually copy data is unnecessarily strict, and the qiov initialization is unnecessarily for bdrv_aio_write_zeroes and bdrv_aio_discard. Rewrite mirror_iteration to fix both flaws. The output of iotests 109 is updated because we now report the offset and len slightly differently in mirroring progress. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1454637630-10585-2-git-send-email-famz@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29vhdx: Simplify vhdx_set_shift_bits()Max Reitz
For values which are powers of two (and we do assume all of these to be), sizeof(x) * 8 - 1 - clz(x) == ctz(x). Therefore, use ctz(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 1450451066-13335-3-git-send-email-mreitz@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29vhdx: DIV_ROUND_UP() in vhdx_calc_bat_entries()Max Reitz
We have DIV_ROUND_UP(), so we can use it to produce more easily readable code. It may be slower than the bit shifting currently performed (because it actually performs a division), but since vhdx_calc_bat_entries() is never used in a hot path, this is completely fine. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 1450451066-13335-2-git-send-email-mreitz@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29iscsi: add support for getting CHAP password via QCryptoSecret APIDaniel P. Berrange
The iSCSI driver currently accepts the CHAP password in plain text as a block driver property. This change adds a new "password-secret" property that accepts the ID of a QCryptoSecret instance. $QEMU \ -object secret,id=sec0,filename=/home/berrange/example.pw \ -drive driver=iscsi,url=iscsi://example.com/target-foo/lun1,\ user=dan,password-secret=sec0 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1453385961-10718-4-git-send-email-berrange@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29curl: add support for HTTP authentication parametersDaniel P. Berrange
If connecting to a web server which has authentication turned on, QEMU gets a 401 as curl has not been configured with any authentication credentials. This adds 4 new parameters to the curl block driver options 'username', 'password-secret', 'proxy-username' and 'proxy-password-secret'. Passwords are provided using the recently added 'secret' object type $QEMU \ -object secret,id=sec0,filename=/home/berrange/example.pw \ -object secret,id=sec1,filename=/home/berrange/proxy.pw \ -drive driver=http,url=http://example.com/some.img,\ username=dan,password-secret=sec0,\ proxy-username=dan,proxy-password-secret=sec1 Of course it is possible to use the same secret for both the proxy & server passwords if desired, or omit the proxy auth details, or the server auth details as required. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1453385961-10718-3-git-send-email-berrange@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29rbd: add support for getting password from QCryptoSecret objectDaniel P. Berrange
Currently RBD passwords must be provided on the command line via $QEMU -drive file=rbd:pool/image:id=myname:\ key=QVFDVm41aE82SHpGQWhBQXEwTkN2OGp0SmNJY0UrSE9CbE1RMUE=:\ auth_supported=cephx This is insecure because the key is visible in the OS process listing. This adds support for an 'password-secret' parameter in the RBD parameters that can be used with the QCryptoSecret object to provide the password via a file: echo "QVFDVm41aE82SHpGQWhBQXEwTkN2OGp0SmNJY0UrSE9CbE1RMUE=" > poolkey.b64 $QEMU -object secret,id=secret0,file=poolkey.b64,format=base64 \ -drive driver=rbd,filename=rbd:pool/image:id=myname:\ auth_supported=cephx,password-secret=secret0 Reviewed-by: Josh Durgin <jdurgin@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1453385961-10718-2-git-send-email-berrange@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29sheepdog: allow to delete snapshotVasiliy Tolstov
This patch implements a blockdriver function bdrv_snapshot_delete() in the sheepdog driver. With the new function, snapshots of sheepdog can be deleted from libvirt. Cc: Jeff Cody <jcody@redhat.com> Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru> Message-id: 1450873346-22334-1-git-send-email-mitake.hitoshi@lab.ntt.co.jp Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-29block/nfs: add support for setting debug levelPeter Lieven
recent libnfs versions support logging debug messages. Add support for it in qemu through an URL parameter. Example: qemu -cdrom nfs://127.0.0.1/iso/my.iso?debug=2 Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1447052973-14513-1-git-send-email-pl@kamp.de Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-22qapi: Add burst length fields to BlockDeviceInfoAlberto Garcia
This patch adds the new bps_*_max_length and iops_*_max_length parameters to the BlockDeviceInfo struct. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22quorum: fix segfault when read fails in fifo modeChanglong Xie
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-16nbd: enable use of TLS with NBD block driverDaniel P. Berrange
This modifies the NBD driver so that it is possible to request use of TLS. This is done by providing the 'tls-creds' parameter with the ID of a previously created QCryptoTLSCreds object. For example $QEMU -object tls-creds-x509,id=tls0,endpoint=client,\ dir=/home/berrange/security/qemutls \ -drive driver=nbd,host=localhost,port=9000,tls-creds=tls0 The client will drop the connection if the NBD server does not provide TLS. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-15-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: implement TLS support in the protocol negotiationDaniel P. Berrange
This extends the NBD protocol handling code so that it is capable of negotiating TLS support during the connection setup. This involves requesting the STARTTLS protocol option before any other NBD options. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-14-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: convert to using I/O channels for actual socket I/ODaniel P. Berrange
Now that all callers are converted to use I/O channels for initial connection setup, it is possible to switch the core NBD protocol handling core over to use QIOChannel APIs for actual sockets I/O. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-7-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: convert block client to use I/O channels for connection setupDaniel P. Berrange
This converts the NBD block driver client to use the QIOChannelSocket class for initial connection setup. The NbdClientSession struct has two pointers, one to the master QIOChannelSocket providing the raw data channel, and one to a QIOChannel which is the current channel used for I/O. Initially the two point to the same object, but when TLS support is added, they will point to different objects. The qemu-img & qemu-io tools now need to use MODULE_INIT_QOM to ensure the QIOChannel object classes are registered. The qemu-nbd tool already did this. In this initial conversion though, all I/O is still actually done using the raw POSIX sockets APIs. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 09 Feb 2016 15:11:25 GMT using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: block: add missing call to bdrv_drain_recurse blockjob: Fix hang in block_job_finish_sync iov: avoid memcpy for "simple" iov_from_buf/iov_to_buf Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-09block: add missing call to bdrv_drain_recursePaolo Bonzini
This is also needed in bdrv_drain_all, not just in bdrv_drain. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1450867706-19860-3-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-02block: Use returned *file in bdrv_co_get_block_statusFam Zheng
Now that all drivers return the right "file" pointer, we can use it. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1453780743-16806-14-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02vmdk: Return extent's file in bdrv_get_block_statusFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-13-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02vmdk: Fix calculation of block status's offsetFam Zheng
"offset" is the offset of cluster and sector_num doesn't necessarily refer to the start of it, it should add index_in_cluster. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-12-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02vpc: Assign bs->file->bs to file in vpc_co_get_block_statusFam Zheng
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-11-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02vdi: Assign bs->file->bs to file in vdi_co_get_block_statusFam Zheng
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-10-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02sheepdog: Assign bs to file in sd_co_get_block_statusFam Zheng
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-9-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02qed: Assign bs->file->bs to file in bdrv_qed_co_get_block_statusFam Zheng
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-8-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02parallels: Assign bs->file->bs to file in parallels_co_get_block_statusFam Zheng
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-7-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02iscsi: Assign bs to file in iscsi_co_get_block_statusFam Zheng
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-6-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02raw: Assign bs to file in raw_co_get_block_statusFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-5-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02qcow2: Assign bs->file->bs to file in qcow2_co_get_block_statusFam Zheng
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-4-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02qcow: Assign bs->file->bs to file in qcow_co_get_block_statusFam Zheng
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-3-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02block: Add "file" output parameter to block status query functionsFam Zheng
The added parameter can be used to return the BDS pointer which the valid offset is referring to. Its value should be ignored unless BDRV_BLOCK_OFFSET_VALID in ret is set. Until block drivers fill in the right value, let's clear it explicitly right before calling .bdrv_get_block_status. The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest case 102 passing, and will be fixed once all drivers return the right file pointer. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02block: acquire in bdrv_query_image_infoPaolo Bonzini
NFS calls aio_poll inside bdrv_get_allocated_size. This requires acquiring the AioContext. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1450867706-19860-1-git-send-email-pbonzini@redhat.com Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02block: Add blk_remove_all_bs()Max Reitz
When bdrv_close_all() is called, instead of force-closing all root BlockDriverStates, it is better to just drop the reference from all BlockBackends and let them be closed automatically. This prevents BDS from getting closed that are still referenced by other BDS, which may result in loss of cached data. This patch adds a function for doing that, but does not yet incorporate it in bdrv_close_all(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02block: Use blk_remove_bs() in blk_delete()Max Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02block: Remove BDS close notifierMax Reitz
It is unused now, so we can remove it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02block: Add BB-BDS remove/insert notifiersMax Reitz
bdrv_close() no longer signifies ejection of a medium, this is now done by removing the BDS from the BB. Therefore, we want to have a notifier for that in the BB instead of a close notifier in the BDS. The former is added now, the latter is removed later. Symmetrically, another notifier list is added that is invoked whenever a BDS is inserted. We will need that for virtio-blk and virtio-scsi, which can then remove their op blockers on BDS ejection and set them up on insertion. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02vmdk: Fix converting to streamOptimizedFam Zheng
Commit d62d9dc4b8 lifted streamOptimized images's version to 3, but we now refuse to open version 3 images read-write. We need to make streamOptimized an exception to allow converting to it. This fixes the accidentally broken iotests case 059 for the same reason. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02block/qapi: Emit tray_open only if there is a trayMax Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1454096953-31773-5-git-send-email-mreitz@redhat.com
2016-02-02block: Add blk_dev_has_tray()Max Reitz
Pull out the check whether a block device has a tray from blk_dev_is_tray_open() into its own function so both attributes (whether there is a tray vs. whether that tray is open) can be queried independently. Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1454096953-31773-2-git-send-email-mreitz@redhat.com
2016-01-20vmdk: Create streamOptimized as version 3Fam Zheng
VMware products accept only version 3 for streamOptimized, let's bump the version. Reported-by: Radoslav Gerganov <rgerganov@vmware.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20qcow2: Make image inaccessible after failed qcow2_invalidate_cache()Kevin Wolf
If qcow2_invalidate_cache() fails, we are in a state where qcow2_close() has already been completed, but the image hasn't been reopened yet. Calling into any qcow2 function for an image in this state will cause crashes. The real solution would be to get rid of the close/open pair and instead do an atomic reset of the involved data structures, but this isn't trivial, so let's just make the image inaccessible for now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20qcow2: Fix BDRV_O_INACTIVE handling in qcow2_invalidate_cache()Kevin Wolf
What qcow2_invalidate_cache() should do is close the image with BDRV_O_INACTIVE set and reopen it with the flag cleared. In fact, it used to do exactly the opposite: qcow2_close() relied on bs->open_flags, which is already updated to have cleared BDRV_O_INACTIVE at this point, whereas qcow2_open() was called with s->flags, which has the flag still set. Fix this. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20qcow2: Implement .bdrv_inactivateKevin Wolf
The callback has to ensure that closing or flushing the image afterwards wouldn't cause a write access to the image files. This means that just the caches have to be written out, which is part of the existing .bdrv_close implementation. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20block: Rename BDRV_O_INCOMING to BDRV_O_INACTIVEKevin Wolf
Instead of covering only the state of images on the migration destination before the migration is completed, the flag will also cover the state of images on the migration source after completion. This common state implies that the image is technically still open, but no writes will happen and any cached contents will be reloaded from disk if and when the image leaves this state. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20block: Assert no write requests under BDRV_O_INCOMINGKevin Wolf
As long as BDRV_O_INCOMING is set, the image file is only opened so we have a file descriptor for it. We're definitely not supposed to modify the image, it's still owned by the migration source. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20qcow2: Write full header on image creationKevin Wolf
When creating a qcow2 image, we didn't necessarily call qcow2_update_header(), but could end up with the basic header that qcow2_create2() created manually. One thing that this basic header lacks is the feature table. Let's make sure that it's always present. This requires a few updates to test cases as well. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20qcow2: Write feature table only for v3 imagesKevin Wolf
Version 2 images don't have feature bits, so writing a feature table to those images is kind of pointless. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-16 03:16:48 +0000