aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)Author
2015-02-06block/raw-posix.c: Fix raw_getlength() on Mac OS X block devicesProgrammingkid
This patch replaces the dummy code in raw_getlength() for block devices on OS X, which always returned LLONG_MAX, with a real implementation that returns the actual block device size. Signed-off-by: John Arbuckle <programmingkidx@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06qcow2: Rewrite qcow2_alloc_bytes()Max Reitz
qcow2_alloc_bytes() is a function with insufficient error handling and an unnecessary goto. This patch rewrites it. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: Give always priority to unused entries in the qcow2 L2 cacheAlberto Garcia
The current algorithm to replace entries from the L2 cache gives priority to newer hits by dividing the hit count of all existing entries by two everytime there is a cache miss. However, if there are several cache misses the hit count of the existing entries can easily go down to 0. This will result in those entries being replaced even when there are others that have never been used. This problem is more noticeable with larger disk images and cache sizes, since the chances of having several misses before the cache is full are higher. If we make sure that the hit count can never go down to 0 again, unused entries will always have priority. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06nbd: fix max_discard/max_transfer_lengthDenis V. Lunev
nbd_co_discard calls nbd_client_session_co_discard which uses uint32_t as the length in bytes of the data to discard due to the following definition: struct nbd_request { uint32_t magic; uint32_t type; uint64_t handle; uint64_t from; uint32_t len; <-- the length of data to be discarded, in bytes } QEMU_PACKED; Thus we should limit bl_max_discard to UINT32_MAX >> BDRV_SECTOR_BITS to avoid overflow. NBD read/write code uses the same structure for transfers. Fix max_transfer_length accordingly. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Peter Lieven <pl@kamp.de> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06nbd: Improve error messagesMax Reitz
This patch makes use of the Error object for nbd_receive_negotiate() so that errors during negotiation look nicer. Furthermore, this patch adds an additional error message if the received magic was wrong, but would be correct for the other protocol version, respectively: So if an export name was specified, but the NBD server magic corresponds to an old handshake, this condition is explicitly signaled to the user, and vice versa. As these messages are now part of the "Could not open image" error message, additional filtering has to be employed in iotest 083, which this patch does as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: fix off-by-one error in qcow and qcow2Jeff Cody
This fixes an off-by-one error introduced in 9a29e18. Both qcow and qcow2 need to make sure to leave room for string terminator '\0' for the backing file, so the max length of the non-terminated string is either 1023 or PATH_MAX - 1. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06qed: check for header size overflowStefan Hajnoczi
Header size is denoted in clusters. The maximum cluster size is 64 MB but there is no limit on header size. Check for uint32_t overflow in case the header size field has a whacky value. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1421065893-18875-2-git-send-email-stefanha@redhat.com Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: improve zeroes handlingPeter Wu
Disk images may contain large all-zeroes gaps (1.66k sectors or 812 MiB is seen in the real world). These blocks (type 2) do not need to be extracted into a temporary buffer, there is no need to allocate memory for these blocks nor to check its length. (For the test image, the maximum uncompressed size is 1054371 bytes, probably for a bzip2-compressed block.) Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1420566495-13284-13-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: support bzip2 block entry typesPeter Wu
This patch adds support for bzip2-compressed block entries as introduced with OS X 10.4 (source: https://en.wikipedia.org/wiki/Apple_Disk_Image). It was tested against a 5.2G "OS X Yosemite" installation image which stores the BLXX block in the XML property list (instead of resource forks) and has over 5k chunks. New configure entries are added (--enable-bzip2 / --disable-bzip2) to control inclusion of bzip2 functionality (which requires linking against libbz2). The help message suggests that this option is needed for DMG files, but the tests are generic enough that other parts of QEMU can use bzip2 if needed. The identifiers are based on http://newosxbook.com/DMG.html. The decompression routines are based on the zlib case, but as there is no way to reset the decompression state (unlike zlib), memory is allocated and deallocated for every decompression. This should not be problematic as the decompression takes most of the time and as blocks are typically about/over 1 MiB in size, only one allocation is done every 2000 sectors. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1420566495-13284-12-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: factor out block type checkPeter Wu
In preparation for adding bzip2 support, split the type check into a separate function. Make all offsets relative to the begin of a chunk such that it is easier to recognize the position without having to add up all offsets. Some comments are added to describe the fields. There is no functional change. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1420566495-13284-11-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: use SectorNumber from BLKX headerPeter Wu
Previously the sector table parsing relied on the previous offset of the DMG file. Now it uses the sector number from the BLKX header (see http://newosxbook.com/DMG.html). The implementation of dmg2img (from vu1tur) does not base the output sector on the location of the terminator (0xffffffff) either so it should be safe to drop this dependency on the previous state. (It makes somehow makes sense, a terminator should halt further processing of a block and is perhaps used to preallocate some space.) Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1420566495-13284-10-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: fix sector data offset calculationPeter Wu
This patch addresses two issues: - The data fork offset was not taken into account, resulting in failure to read an InstallESD.dmg file (5164763151 bytes) which had a non-zero DataForkOffset field. - The offset of the previous block ("partition") was unconditionally added to the current block because older files would start the input offset of a new block at zero. Newer files (including vlc-2.1.5.dmg, tuxpaint-0.9.15-macosx.dmg and OS X Yosemite [MAS].dmg) failed in reads because these files have chunk offsets, relative to the begin of a data fork. Now the data offset of the mish is taken into account. While we could check that the data_offset is within the data fork, let's not do that here as it would only result in parse failures on invalid files (rather than gracefully handling such bad files). dmg_read will error out if the offset is incorrect. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1420566495-13284-9-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: set virtual size to a non-zero valuePeter Wu
Right now the virtual size is always reported as zero which makes it impossible to convert between formats. After this patch, the number of sectors will be read from the trailer ("koly" block). To verify the behavior, the output of `dmg2img foo.dmg foo.img` was compared against `qemu-img convert -f dmg -O raw foo.dmg foo.raw`. The tests showed that the file contents are exactly the same, except that QEMU creates a slightly larger file (it matches the total sectors count). Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1420566495-13284-8-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: process XML plistsPeter Wu
The format is simple enough to avoid using a full-blown XML parser. It assumes that all BLKX items begin with the "mish" magic word, therefore it is not a problem if other values get matched which are not a BLKX block. The offsets are based on the description at http://newosxbook.com/DMG.html For compatibility with glib 2.12, use g_base64_decode (which additionally requires an extra buffer allocation) instead of g_base64_decode_inplace (which is only available since glib 2.20). Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1420566495-13284-7-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: validate chunk size to avoid overflowPeter Wu
Previously the chunk size was not checked, allowing for a large memory allocation. This patch checks whether the chunks size is within the resource fork length, and whether the resource fork is below the trailer of the dmg file. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1420566495-13284-6-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: process a buffer instead of reading intsPeter Wu
As the decoded plist XML is not a pointer in the file, dmg_read_mish_block must be able to process a buffer instead of a file pointer. Since the full buffer must be processed, let's change the return value again to just a success flag. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1420566495-13284-5-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: extract processing of resource forksPeter Wu
Besides the offset, also read the resource length. This length is now used in the extracted function to verify the end of the resource fork against "count" from the resource fork. Instead of relying on the value of offset to conclude whether the resource fork is available or not (info_begin==0), check the rsrc_fork_length instead. This would allow a dmg file to begin with a resource fork. This seemingly unnecessary restriction was found while trying to craft a DMG file by hand. Other changes: - Do not require resource data offset to be 0x100 (but check that it is within bounds though). - Further improve boundary checking (resource data must be within the resource fork). - Use correct value for resource data length (spotted by John Snow) - Consider the resource data offset when determining info_end. This fixes an EINVAL on the tuxpaint dmg example. The resource fork format is documented at https://developer.apple.com/legacy/library/documentation/mac/pdf/MoreMacintoshToolbox.pdf#page=151 Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1420566495-13284-4-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: extract mish block decoding functionalityPeter Wu
Extract the mish block decoder such that this can be used for other formats in the future. A new DmgHeaderState struct is introduced to share state while decoding. The code is kept unchanged as much as possible, a "fail" label is added for example where a simple return would probably do. In dmg_open, the variable "tmp" is renamed to "rsrc_data_offset" for clarity and comments have been added explaining various data. Note that this patch has one subtle difference with the previous version which should not affect functionality. In the previous code, the end of a resource was inferred from the mish block (the offsets would be increased by the fields). In this patch, the resource length is used instead to avoid the need to rely on the previous offsets. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1420566495-13284-3-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/dmg: properly detect the UDIF trailerPeter Wu
DMG files have a variable length with a UDIF trailer at the end of a file. This UDIF trailer is essential as it describes the contents of the image. At the moment however, the start of this trailer is almost always incorrect as bdrv_getlength() returns a multiple of the block size (rounded up). This results in a failure to recognize DMG files, resulting in Invalid argument (EINVAL) errors. As there is no API to retrieve the real file size, look for the magic header in the last two sectors to find the start of this 512-byte UDIF trailer (the "koly" block). The resource fork offset ("info_begin") has its offset adjusted as the initial value of offset does not mean "end of file" anymore, but "begin of UDIF trailer". [Replaced error_set(errp, ERROR_CLASS_GENERIC_ERROR, ...) with error_setg(errp, ...) as discussed with Peter. --Stefan] Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1420566495-13284-2-git-send-email-peter@lekensteyn.nl Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: add event when disk usage exceeds thresholdFrancesco Romani
Managing applications, like oVirt (http://www.ovirt.org), make extensive use of thin-provisioned disk images. To let the guest run smoothly and be not unnecessarily paused, oVirt sets a disk usage threshold (so called 'high water mark') based on the occupation of the device, and automatically extends the image once the threshold is reached or exceeded. In order to detect the crossing of the threshold, oVirt has no choice but aggressively polling the QEMU monitor using the query-blockstats command. This lead to unnecessary system load, and is made even worse under scale: deployments with hundreds of VMs are no longer rare. To fix this, this patch adds: * A new monitor command `block-set-write-threshold', to set a mark for a given block device. * A new event `BLOCK_WRITE_THRESHOLD', to report if a block device usage exceeds the threshold. * A new `write_threshold' field into the `BlockDeviceInfo' structure, to report the configured threshold. This will allow the managing application to use smarter and more efficient monitoring, greatly reducing the need of polling. [Updated qemu-iotests 067 output to add the new 'write_threshold' property. --Stefan] [Changed g_assert_false() to !g_assert() to fix the build on older glib versions. --Kevin] Signed-off-by: Francesco Romani <fromani@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block-backend: expose bs->bl.max_transfer_lengthPeter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: add accounting for merged requestsPeter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06qed: Really remove unused field QEDAIOCB.finishedFam Zheng
The commit 533ffb17a that removed qed_aiocb_info.cancel said to remove this but didn't do it. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: use fallocate(FALLOC_FL_PUNCH_HOLE) & fallocate(0) to write zeroesDenis V. Lunev
This sequence works efficiently if FALLOC_FL_ZERO_RANGE is not supported. Unfortunately, FALLOC_FL_ZERO_RANGE is supported on really modern systems and only for a couple of filesystems. FALLOC_FL_PUNCH_HOLE is much more mature. The sequence of 2 operations FALLOC_FL_PUNCH_HOLE and 0 is necessary due to the following reasons: - FALLOC_FL_PUNCH_HOLE creates a hole in the file, the file becomes sparse. In order to retain original functionality we must allocate disk space afterwards. This is done using fallocate(0) call - fallocate(0) without preceeding FALLOC_FL_PUNCH_HOLE will do nothing if called above already allocated areas of the file, i.e. the content will not be zeroed This should increase the performance a bit for not-so-modern kernels. CC: Max Reitz <mreitz@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Peter Lieven <pl@kamp.de> CC: Fam Zheng <famz@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/raw-posix: call plain fallocate in handle_aiocb_write_zeroesDenis V. Lunev
There is a possibility that we are extending our image and thus writing zeroes beyond the end of the file. In this case we do not need to care about the hole to make sure that there is no data in the file under this offset (pre-condition to fallocate(0) to work). We could simply call fallocate(0). This improves the performance of writing zeroes even on really old platforms which do not have even FALLOC_FL_PUNCH_HOLE. Before the patch do_fallocate was used when either CONFIG_FALLOCATE_PUNCH_HOLE or CONFIG_FALLOCATE_ZERO_RANGE are defined. Now the story is different. CONFIG_FALLOCATE is defined when Linux fallocate is defined, posix_fallocate is completely different story (CONFIG_POSIX_FALLOCATE). CONFIG_FALLOCATE is mandatory prerequite for both CONFIG_FALLOCATE_PUNCH_HOLE and CONFIG_FALLOCATE_ZERO_RANGE thus we are on the safe side. CC: Max Reitz <mreitz@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Peter Lieven <pl@kamp.de> CC: Fam Zheng <famz@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: use fallocate(FALLOC_FL_ZERO_RANGE) in handle_aiocb_write_zeroesDenis V. Lunev
This efficiently writes zeroes on Linux if the kernel is capable enough. FALLOC_FL_ZERO_RANGE correctly handles all cases, including and not including file expansion. CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Peter Lieven <pl@kamp.de> CC: Fam Zheng <famz@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/raw-posix: refactor handle_aiocb_write_zeroes a bitDenis V. Lunev
move code dealing with a block device to a separate function. This will allow to implement additional processing for ordinary files. Please note, that xfs_code has been moved before checking for s->has_write_zeroes as xfs_write_zeroes does not touch this flag inside. This makes code a bit more consistent. CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Peter Lieven <pl@kamp.de> CC: Fam Zheng <famz@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/raw-posix: create do_fallocate helperDenis V. Lunev
The pattern do { if (fallocate(s->fd, mode, offset, len) == 0) { return 0; } } while (errno == EINTR); ret = translate_err(-errno); will be commonly useful in next patches. Create helper for it. CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Peter Lieven <pl@kamp.de> CC: Fam Zheng <famz@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block/raw-posix: create translate_err helper to merge errno valuesDenis V. Lunev
actually the code if (ret == -ENODEV || ret == -ENOSYS || ret == -EOPNOTSUPP || ret == -ENOTTY) { ret = -ENOTSUP; } is present twice and will be added a couple more times. Create helper for this. CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Peter Lieven <pl@kamp.de> CC: Fam Zheng <famz@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23block: vhdx - force FileOffsetMB field to '0' for certain block statesJeff Cody
The v1.0.0 spec calls out PAYLOAD_BLOCK_ZERO FileOffsetMB field as being 'reserved'. In practice, this means that Hyper-V will fail to read a disk image with PAYLOAD_BLOCK_ZERO block states with a FileOffsetMB value other than 0. The other states that indicate a block that is not there (PAYLOAD_BLOCK_UNDEFINED, PAYLOAD_BLOCK_NOT_PRESENT, PAYLOAD_BLOCK_UNMAPPED) have multiple options for what FileOffsetMB may be set to, and '0' is explicitly called out as an option. For all the above states, we will also just set the FileOffsetMB value to 0. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: a9fe92f53f07e6ab1693811e4312c0d1e958500b.1421787566.git.jcody@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-01-23block: update string sizes for filename,backing_file,exact_filenameJeff Cody
The string field entries 'filename', 'backing_file', and 'exact_filename' in the BlockDriverState struct are defined as 1024 bytes. However, many places that use these values accept a maximum of PATH_MAX bytes, so we have a mixture of 1024 byte and PATH_MAX byte allocations. This patch makes the BlockDriverStruct field string sizes match usage. This patch also does a few fixes related to the size that needs to happen now: * the block qapi driver is updated to use PATH_MAX bytes * the qcow and qcow2 drivers have an additional safety check * the block vvfat driver is updated to use PATH_MAX bytes for the size of backing_file, for systems where PATH_MAX is < 1024 bytes. * qemu-img uses PATH_MAX rather than 1024. These instances were not changed to be dynamically allocated, however, as the extra temporary 3K in stack usage for qemu-img does not seem worrisome. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23block: mirror - change string allocation to 2-bytesJeff Cody
The backing_filename string in mirror_run() is only used to check for a NULL string, so we don't need to allocate 1024 bytes (or, later, PATH_MAX bytes), when we only need to copy the first 2 characters. We technically only need 1 byte, as we are just checking for NULL, but since backing_filename[] is populated by bdrv_get_backing_filename(), a string size of 1 will always only return '\0'; Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23block: qapi - move string allocation from stack to the heapJeff Cody
Rather than declaring 'backing_filename2' on the stack in bdrv_query_image_info(), dynamically allocate it on the heap. Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23block: vmdk - move string allocations from stack to the heapJeff Cody
Functions 'vmdk_parse_extents' and 'vmdk_create' allocate several PATH_MAX sized arrays on the stack. Make these dynamically allocated. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23block: vmdk - make ret variable usage clearJeff Cody
Keep the variable 'ret' something that is returned by the function it is defined in. For the return value of 'sscanf', use a more meaningful variable name. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23qcow2: Add two more unalignment checksMax Reitz
This adds checks for unaligned L2 table offsets and unaligned data cluster offsets (actually the preallocated offsets for zero clusters) to the zero cluster expansion function. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-13coroutine: drop qemu_coroutine_adjust_pool_sizePaolo Bonzini
This is not needed anymore. The new TLS-based algorithm is adaptive. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1417518350-6167-7-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-01-13qmp: Add command 'blockdev-backup'Fam Zheng
Similar to drive-backup, but this command uses a device id as target instead of creating/opening an image file. Also add blocker on target bs, since the target is also a named device now. Add check and report error for bs == target which became possible but is an illegal case with introduction of blockdev-backup. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1418899027-8445-3-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-01-13block: fix spoiling all dirty bitmaps by mirror and migrationVladimir Sementsov-Ogievskiy
Mirror and migration use dirty bitmaps for their purposes, and since commit [block: per caller dirty bitmap] they use their own bitmaps, not the global one. But they use old functions bdrv_set_dirty and bdrv_reset_dirty, which change all dirty bitmaps. Named dirty bitmaps series by Fam and Snow are affected: mirroring and migration will spoil all (not related to this mirroring or migration) named dirty bitmaps. This patch fixes this by adding bdrv_set_dirty_bitmap and bdrv_reset_dirty_bitmap, which change concrete bitmap. Also, to prevent such mistakes in future, old functions bdrv_(set,reset)_dirty are made static, for internal block usage. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com> CC: John Snow <jsnow@redhat.com> CC: Fam Zheng <famz@redhat.com> CC: Denis V. Lunev <den@openvz.org> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1417081246-3593-1-git-send-email-vsementsov@parallels.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-01-13block/vmdk: Relative backing file for creationMax Reitz
When a vmdk image is created with a backing file, it is opened to check whether it is indeed a vmdk file by letting qemu probe it. When doing so, the backing filename is relative to the image's base directory so it should be interpreted accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-13block: JSON filenames and relative backing filesMax Reitz
When using a relative backing file name, qemu needs to know the directory of the top image file. For JSON filenames, such a directory cannot be easily determined (e.g. how do you determine the directory of a qcow2 BDS directly on top of a quorum BDS?). Therefore, do not allow relative filenames for the backing file of BDSs only having a JSON filename. Furthermore, BDS::exact_filename should be used whenever possible. If BDS::filename is not equal to BDS::exact_filename, the former will always be a JSON object. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-03block/iscsi: fix uninitialized variablePeter Wu
'ret' was never initialized in the success path. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-12linux-aio: simplify removal of completed iocbs from the listPaolo Bonzini
There is no need to do another O(n) pass on the list; the iocb to split the list at is already available through the array we passed to io_submit. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1418305950-30924-6-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-12linux-aio: drop return code from laio_io_unplug and ioq_submitPaolo Bonzini
These are unused. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1418305950-30924-5-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-12linux-aio: rename LaioQueue idx field to "n"Paolo Bonzini
It does not identify an index in an array anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1418305950-30924-4-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-12linux-aio: track whether the queue is blockedPaolo Bonzini
Avoid that unplug submits requests when io_submit reported that it couldn't accept more; at the same time, try more io_submit calls if it could handle the whole set of requests that were passed, so that the "blocked" flag is reset as soon as possible. After the previous patch, laio_submit already tried to avoid submitting requests to a blocked queue, by comparing s->io_q.idx with "==" instead of the more natural ">=". Switch to the simpler expression now that we have the "blocked" flag. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1418305950-30924-3-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-12linux-aio: queue requests that cannot be submittedPaolo Bonzini
Keep a queue of requests that were not submitted; pass them to the kernel when a completion is reported, unless the queue is plugged. The array of iocbs is rebuilt every time from scratch. This avoids keeping the iocbs array and list synchronized. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1418305950-30924-2-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-12block: vhdx - set .bdrv_has_zero_init to bdrv_has_zero_init_1Jeff Cody
Now that new VHDX images will default to BAT block states of PAYLOAD_BLOCK_ZERO, we can indicate that VHDX has zero init. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 5e582703e36450b9ca939e2e5c9fa3930030f7fe.1418018421.git.jcody@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-12block: vhdx - change .vhdx_create default block state to ZEROJeff Cody
The VHDX spec specifies that the default new block state is PAYLOAD_BLOCK_NOT_PRESENT for a dynamic VHDX image, and PAYLOAD_BLOCK_FULLY_PRESENT for a fixed VHDX image. However, in order to create space-efficient VHDX images with qemu-img convert, it is desirable to be able to set has_zero_init to true for VHDX. There is currently an option when creating VHDX images, to use block state ZERO for new blocks. However, this currently defaults to 'off'. In order to be able to eventually set has_zero_init to true for VHDX, this needs to default to 'on'. This patch changes the default to 'on', and provides some help information to warn against setting it to 'off' when using qemu-img convert. [Max Reitz pointed out that a full stop was missing at the end of the VHDX_BLOCK_OPT_ZERO option help text. I have added it. --Stefan] Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 85164899eacc86e150c3ceba793cf93b398dedd7.1418018421.git.jcody@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-12block: vhdx - update PAYLOAD_BLOCK_UNMAPPED value to match 1.00 specJeff Cody
The 0.95 VHDX spec defined PAYLOAD_BLOCK_UNMAPPED to be 5. The 1.00 VHDX spec redefines PAYLOAD_BLOCK_UNMAPPED to be 3 instead. The original value of 5 is now an undefined state in the spec, but it should be safe to treat it the same and return zeros for data read. This way, we can maintain compatibility with any images out in the wild that may have been created in accordance to the 0.95 spec. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 8a4d2da73a8dbc04cde62bea782fc09ff84b1cf1.1418018421.git.jcody@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 12:49:33 +0000