| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds QCow2SubclusterType, which is the subcluster-level
version of QCow2ClusterType. All QCOW2_SUBCLUSTER_* values have the
the same meaning as their QCOW2_CLUSTER_* equivalents (when they
exist). See below for details and caveats.
In images without extended L2 entries clusters are treated as having
exactly one subcluster so it is possible to replace one data type with
the other while keeping the exact same semantics.
With extended L2 entries there are new possible values, and every
subcluster in the same cluster can obviously have a different
QCow2SubclusterType so functions need to be adapted to work on the
subcluster level.
There are several things that have to be taken into account:
a) QCOW2_SUBCLUSTER_COMPRESSED means that the whole cluster is
compressed. We do not support compression at the subcluster
level.
b) There are two different values for unallocated subclusters:
QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN which means that the whole
cluster is unallocated, and QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC
which means that the cluster is allocated but the subcluster is
not. The latter can only happen in images with extended L2
entries.
c) QCOW2_SUBCLUSTER_INVALID is used to detect the cases where an L2
entry has a value that violates the specification. The caller is
responsible for handling these situations.
To prevent compatibility problems with images that have invalid
values but are currently being read by QEMU without causing side
effects, QCOW2_SUBCLUSTER_INVALID is only returned for images
with extended L2 entries.
qcow2_cluster_to_subcluster_type() is added as a separate function
from qcow2_get_subcluster_type(), but this is only temporary and both
will be merged in a subsequent patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <26ef38e270f25851c98b51278852b4c4a7f97e69.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Extended L2 entries are 128-bit wide: 64 bits for the entry itself and
64 bits for the subcluster allocation bitmap.
In order to support them correctly get/set_l2_entry() need to be
updated so they take the entry width into account in order to
calculate the correct offset.
This patch also adds the get/set_l2_bitmap() functions that are
used to access the bitmaps. For convenience we allow calling
get_l2_bitmap() on images without subclusters. In this case the
returned value is always 0 and has no meaning.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6ee0f81ae3329c991de125618b3675e1e46acdbb.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
qcow2 images with subclusters have 128-bit L2 entries. The first 64
bits contain the same information as traditional images and the last
64 bits form a bitmap with the status of each individual subcluster.
Because of that we cannot assume that L2 entries are sizeof(uint64_t)
anymore. This function returns the proper value for the image.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <d34d578bd0380e739e2dde3e8dd6187d3d249fa9.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Like offset_into_cluster() and size_to_clusters(), but for
subclusters.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <3cc2390dcdef3d234d47c741b708bd8734490862.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
For a given offset, return the subcluster number within its cluster
(i.e. with 32 subclusters per cluster it returns a number between 0
and 31).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <56e3e4ac0d827c6a2f5f259106c5ddb7c4ca2653.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This patch adds the following new fields to BDRVQcow2State:
- subclusters_per_cluster: Number of subclusters in a cluster
- subcluster_size: The size of each subcluster, in bytes
- subcluster_bits: No. of bits so 1 << subcluster_bits = subcluster_size
Images without subclusters are treated as if they had exactly one
subcluster per cluster (i.e. subcluster_size = cluster_size).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <55bfeac86b092fa2c9d182a95cbeb479ff7eca4f.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This function will be used by the qcow2 code to check if an image has
subclusters or not.
At the moment this simply returns false. Once all patches needed for
subcluster support are ready then QEMU will be able to create and
read images with subclusters and this function will return the actual
value.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <905526221083581a1b7057bca1585487661c5c13.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The size of an L2 entry is 64 bits, but if we want to have subclusters
we need extended L2 entries. This means that we have to access L2
tables and slices differently depending on whether an image has
extended L2 entries or not.
This patch replaces all l2_slice[] accesses with calls to
get_l2_entry() and set_l2_entry().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <9586363531fec125ba1386e561762d3e4224e9fc.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
When writing to a qcow2 file there are two functions that take a
virtual offset and return a host offset, possibly allocating new
clusters if necessary:
- handle_copied() looks for normal data clusters that are already
allocated and have a reference count of 1. In those clusters we
can simply write the data and there is no need to perform any
copy-on-write.
- handle_alloc() looks for clusters that do need copy-on-write,
either because they haven't been allocated yet, because their
reference count is != 1 or because they are ZERO_ALLOC clusters.
The ZERO_ALLOC case is a bit special because those are clusters that
are already allocated and they could perfectly be dealt with in
handle_copied() (as long as copy-on-write is performed when required).
In fact, there is extra code specifically for them in handle_alloc()
that tries to reuse the existing allocation if possible and frees them
otherwise.
This patch changes the handling of ZERO_ALLOC clusters so the
semantics of these two functions are now like this:
- handle_copied() looks for clusters that are already allocated and
which we can overwrite (NORMAL and ZERO_ALLOC clusters with a
reference count of 1).
- handle_alloc() looks for clusters for which we need a new
allocation (all other cases).
One important difference after this change is that clusters found
in handle_copied() may now require copy-on-write, but this will be
necessary anyway once we add support for subclusters.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <eb17fc938f6be7be2e8d8ff42763d2c19241f866.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
We are going to need it in other places.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <65e5d9627ca2ebe7e62deaeddf60949c33067d9d.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
handle_alloc() creates a QCowL2Meta structure in order to update the
image metadata and perform the necessary copy-on-write operations.
This patch moves that code to a separate function so it can be used
from other places.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <e5bc4a648dac31972bfa7a0e554be8064be78799.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
qcow2_get_cluster_offset() takes an (unaligned) guest offset and
returns the (aligned) offset of the corresponding cluster in the qcow2
image.
In practice none of the callers need to know where the cluster starts
so this patch makes the function calculate and return the final host
offset directly. The function is also renamed accordingly.
There is a pre-existing exception with compressed clusters: in this
case the function returns the complete cluster descriptor (containing
the offset and size of the compressed data). This does not change with
this patch but it is now documented.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <ffae6cdc5ca8950e8280ac0f696dcc376cb07095.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The file_cluster_offset field of Qcow2AioTask stores a cluster-aligned
host offset. In practice this is not very useful because all users(*)
of this structure need the final host offset into the cluster, which
they calculate using
host_offset = file_cluster_offset + offset_into_cluster(s, offset)
There is no reason why Qcow2AioTask cannot store host_offset directly
and that is what this patch does.
(*) compressed clusters are the exception: in this case what
file_cluster_offset was storing was the full compressed cluster
descriptor (offset + size). This does not change with this patch
but it is documented now.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <07c4b15c644dcf06c9459f98846ac1c4ea96e26f.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since commit 42ac214406e0 (block/block-copy: refactor task creation)
block_copy_task_create calculates the area to be copied via
bdrv_dirty_bitmap_next_dirty_area, but that can return an unaligned byte
count if the image's last cluster end is not aligned to the bitmap's
granularity.
Always ALIGN_UP the resulting bytes value to satisfy block_copy_do_copy,
which requires the 'bytes' parameter to be aligned to cluster size.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20200810095523.15071-1-s.reiter@proxmox.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
When calculating the offset, the result of left shift operation will be promoted
to type int64 automatically because the left operand of + operator is uint64_t.
but the result after integer promotion may be produce an error value for us and
trigger the following asserting error.
For example, consider i=0x2000, cluster_bits=18, the result of left shift
operation will be 0x80000000. Cause argument i is of signed integer type,
the result is automatically promoted to 0xffffffff80000000 which is not
we expected
The way to trigger the assertion error:
qemu-img create -f qcow2 -o preallocation=full,cluster_size=256k tmpdisk 10G
This patch fix it by casting @i to uint64_t before doing left shift operation
Signed-off-by: Guoyi Tu <tu.guoyi@h3c.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 81ba90fe0c014f269621c283269b42ad@h3c.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
During migration, we release all bitmaps after storing them on disk, as
long as they are (1) stored on disk, (2) not read-only, and (3)
consistent.
(2) seems arbitrary, though. The reason we do not release them is
because we do not write them, as there is no need to; and then we just
forget about all bitmaps that we have not written to the file. However,
read-only persistent bitmaps are still in the file and in sync with
their in-memory representation, so we may as well release them just like
any R/W bitmap that we have updated.
It leads to actual problems, too: After migration, letting the source
continue may result in an error if there were any bitmaps on read-only
nodes (such as backing images), because those have not been released by
bdrv_inactive_all(), but bdrv_invalidate_cache_all() attempts to reload
them (which fails, because they are still present in memory).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200730120234.49288-2-mreitz@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
staging
nbd patches for 2020-07-28
- fix NBD handling of trim/zero requests larger than 2G
- allow no-op resizes on NBD (in turn fixing qemu-img convert -c into NBD)
- several deadlock fixes when using NBD reconnect
# gpg: Signature made Tue 28 Jul 2020 15:59:42 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2020-07-28:
block/nbd: nbd_co_reconnect_loop(): don't sleep if drained
block/nbd: on shutdown terminate connection attempt
block/nbd: allow drain during reconnect attempt
block/nbd: split nbd_establish_connection out of nbd_client_connect
iotests: Test convert to qcow2 compressed to NBD
iotests: Add more qemu_img helpers
iotests: Make qemu_nbd_popen() a contextmanager
block: nbd: Fix convert qcow2 compressed to nbd
nbd: Fix large trim/zero requests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
Block patches for 5.1.0:
- Fix block I/O for split transfers
- Fix iotest 197 for non-qcow2 formats
# gpg: Signature made Tue 28 Jul 2020 14:45:28 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-07-28:
iotests/197: Fix for non-qcow2 formats
iotests/028: Add test for cross-base-EOF reads
block: Fix bdrv_aligned_p*v() for qiov_offset != 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We try to go to wakeable sleep, so that, if drain begins it will break
the sleep. But what if nbd_client_co_drain_begin() already called and
s->drained is already true? We'll go to sleep, and drain will have to
wait for the whole timeout. Let's improve it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727184751.15704-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
On shutdown nbd driver may be in a connecting state. We should shutdown
it as well, otherwise we may hang in
nbd_teardown_connection, waiting for conneciton_co to finish in
BDRV_POLL_WHILE(bs, s->connection_co) loop if remote server is down.
How to reproduce the dead lock:
1. Create nbd-fault-injector.conf with the following contents:
[inject-error "mega1"]
event=data
io=readwrite
when=before
2. In one terminal run nbd-fault-injector in a loop, like this:
n=1; while true; do
echo $n; ((n++));
./nbd-fault-injector.py 127.0.0.1:10000 nbd-fault-injector.conf;
done
3. In another terminal run qemu-io in a loop, like this:
n=1; while true; do
echo $n; ((n++));
./qemu-io -c 'read 0 512' nbd://127.0.0.1:10000;
done
After some time, qemu-io will hang. Note, that this hang may be
triggered by another bug, so the whole case is fixed only together with
commit "block/nbd: allow drain during reconnect attempt".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727184751.15704-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
It should be safe to reenter qio_channel_yield() on io/channel read/write
path, so it's safe to reduce in_flight and allow attaching new aio
context. And no problem to allow drain itself: connection attempt is
not a guest request. Moreover, if remote server is down, we can hang
in negotiation, blocking drain section and provoking a dead lock.
How to reproduce the dead lock:
1. Create nbd-fault-injector.conf with the following contents:
[inject-error "mega1"]
event=data
io=readwrite
when=before
2. In one terminal run nbd-fault-injector in a loop, like this:
n=1; while true; do
echo $n; ((n++));
./nbd-fault-injector.py 127.0.0.1:10000 nbd-fault-injector.conf;
done
3. In another terminal run qemu-io in a loop, like this:
n=1; while true; do
echo $n; ((n++));
./qemu-io -c 'read 0 512' nbd://127.0.0.1:10000;
done
After some time, qemu-io will hang trying to drain, for example, like
this:
#3 aio_poll (ctx=0x55f006bdd890, blocking=true) at
util/aio-posix.c:600
#4 bdrv_do_drained_begin (bs=0x55f006bea710, recursive=false,
parent=0x0, ignore_bds_parents=false, poll=true) at block/io.c:427
#5 bdrv_drained_begin (bs=0x55f006bea710) at block/io.c:433
#6 blk_drain (blk=0x55f006befc80) at block/block-backend.c:1710
#7 blk_unref (blk=0x55f006befc80) at block/block-backend.c:498
#8 bdrv_open_inherit (filename=0x7fffba1563bc
"nbd+tcp://127.0.0.1:10000", reference=0x0, options=0x55f006be86d0,
flags=24578, parent=0x0, child_class=0x0, child_role=0,
errp=0x7fffba154620) at block.c:3491
#9 bdrv_open (filename=0x7fffba1563bc "nbd+tcp://127.0.0.1:10000",
reference=0x0, options=0x0, flags=16386, errp=0x7fffba154620) at
block.c:3513
#10 blk_new_open (filename=0x7fffba1563bc "nbd+tcp://127.0.0.1:10000",
reference=0x0, options=0x0, flags=16386, errp=0x7fffba154620) at
block/block-backend.c:421
And connection_co stack like this:
#0 qemu_coroutine_switch (from_=0x55f006bf2650, to_=0x7fe96e07d918,
action=COROUTINE_YIELD) at util/coroutine-ucontext.c:302
#1 qemu_coroutine_yield () at util/qemu-coroutine.c:193
#2 qio_channel_yield (ioc=0x55f006bb3c20, condition=G_IO_IN) at
io/channel.c:472
#3 qio_channel_readv_all_eof (ioc=0x55f006bb3c20, iov=0x7fe96d729bf0,
niov=1, errp=0x7fe96d729eb0) at io/channel.c:110
#4 qio_channel_readv_all (ioc=0x55f006bb3c20, iov=0x7fe96d729bf0,
niov=1, errp=0x7fe96d729eb0) at io/channel.c:143
#5 qio_channel_read_all (ioc=0x55f006bb3c20, buf=0x7fe96d729d28
"\300.\366\004\360U", buflen=8, errp=0x7fe96d729eb0) at
io/channel.c:247
#6 nbd_read (ioc=0x55f006bb3c20, buffer=0x7fe96d729d28, size=8,
desc=0x55f004f69644 "initial magic", errp=0x7fe96d729eb0) at
/work/src/qemu/master/include/block/nbd.h:365
#7 nbd_read64 (ioc=0x55f006bb3c20, val=0x7fe96d729d28,
desc=0x55f004f69644 "initial magic", errp=0x7fe96d729eb0) at
/work/src/qemu/master/include/block/nbd.h:391
#8 nbd_start_negotiate (aio_context=0x55f006bdd890,
ioc=0x55f006bb3c20, tlscreds=0x0, hostname=0x0,
outioc=0x55f006bf19f8, structured_reply=true,
zeroes=0x7fe96d729dca, errp=0x7fe96d729eb0) at nbd/client.c:904
#9 nbd_receive_negotiate (aio_context=0x55f006bdd890,
ioc=0x55f006bb3c20, tlscreds=0x0, hostname=0x0,
outioc=0x55f006bf19f8, info=0x55f006bf1a00, errp=0x7fe96d729eb0) at
nbd/client.c:1032
#10 nbd_client_connect (bs=0x55f006bea710, errp=0x7fe96d729eb0) at
block/nbd.c:1460
#11 nbd_reconnect_attempt (s=0x55f006bf19f0) at block/nbd.c:287
#12 nbd_co_reconnect_loop (s=0x55f006bf19f0) at block/nbd.c:309
#13 nbd_connection_entry (opaque=0x55f006bf19f0) at block/nbd.c:360
#14 coroutine_trampoline (i0=113190480, i1=22000) at
util/coroutine-ucontext.c:173
Note, that the hang may be
triggered by another bug, so the whole case is fixed only together with
commit "block/nbd: on shutdown terminate connection attempt".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200727184751.15704-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
We are going to implement non-blocking version of
nbd_establish_connection, which for a while will be used only for
nbd_reconnect_attempt, not for nbd_open, so we need to call it
separately.
Refactor nbd_reconnect_attempt in a way which makes next commit
simpler.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200727184751.15704-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
When converting to qcow2 compressed format, the last step is a special
zero length compressed write, ending in a call to bdrv_co_truncate(). This
call always fails for the nbd driver since it does not implement
bdrv_co_truncate().
For block devices, which have the same limits, the call succeeds since
the file driver implements bdrv_co_truncate(). If the caller asked to
truncate to the same or smaller size with exact=false, the truncate
succeeds. Implement the same logic for nbd.
Example failing without this change:
In one shell start qemu-nbd:
$ truncate -s 1g test.tar
$ qemu-nbd --socket=/tmp/nbd.sock --persistent --format=raw --offset 1536 test.tar
In another shell convert an image to qcow2 compressed via NBD:
$ echo "disk data" > disk.raw
$ truncate -s 1g disk.raw
$ qemu-img convert -f raw -O qcow2 -c disk1.raw nbd+unix:///?socket=/tmp/nbd.sock; echo $?
1
qemu-img failed, but the conversion was successful:
$ qemu-img info nbd+unix:///?socket=/tmp/nbd.sock
image: nbd+unix://?socket=/tmp/nbd.sock
file format: qcow2
virtual size: 1 GiB (1073741824 bytes)
...
$ qemu-img check nbd+unix:///?socket=/tmp/nbd.sock
No errors were found on the image.
1/16384 = 0.01% allocated, 100.00% fragmented, 100.00% compressed clusters
Image end offset: 393216
$ qemu-img compare disk.raw nbd+unix:///?socket=/tmp/nbd.sock
Images are identical.
Fixes: https://bugzilla.redhat.com/1860627
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <20200727215846.395443-2-nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: typo fixes]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
into staging
bitmaps patches for 2020-07-27
- Improve handling of various post-copy bitmap migration scenarios. A lost
bitmap should merely mean that the next backup must be full rather than
incremental, rather than abruptly breaking the entire guest migration.
- Associated iotest improvements
# gpg: Signature made Mon 27 Jul 2020 21:46:17 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-bitmaps-2020-07-27: (24 commits)
migration: Fix typos in bitmap migration comments
iotests: Adjust which migration tests are quick
qemu-iotests/199: add source-killed case to bitmaps postcopy
qemu-iotests/199: add early shutdown case to bitmaps postcopy
qemu-iotests/199: check persistent bitmaps
qemu-iotests/199: prepare for new test-cases addition
migration/savevm: don't worry if bitmap migration postcopy failed
migration/block-dirty-bitmap: cancel migration on shutdown
migration/block-dirty-bitmap: relax error handling in incoming part
migration/block-dirty-bitmap: keep bitmap state for all bitmaps
migration/block-dirty-bitmap: simplify dirty_bitmap_load_complete
migration/block-dirty-bitmap: rename finish_lock to just lock
migration/block-dirty-bitmap: refactor state global variables
migration/block-dirty-bitmap: move mutex init to dirty_bitmap_mig_init
migration/block-dirty-bitmap: rename dirty_bitmap_mig_cleanup
migration/block-dirty-bitmap: rename state structure types
migration/block-dirty-bitmap: fix dirty_bitmap_mig_before_vm_start
qemu-iotests/199: increase postcopy period
qemu-iotests/199: change discard patterns
qemu-iotests/199: improve performance: set bitmap by discard
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Since these functions take a @qiov_offset, they must always take it into
account when working with @qiov. There are a couple of places where
they do not, but they should.
Fixes: 65cd4424b9df03bb5195351c33e04cbbecc0705c
("block/io: bdrv_aligned_preadv: use and support qiov_offset")
Fixes: 28c4da28695bdbe04b336b2c9c463876cc3aaa6d
("block/io: bdrv_aligned_pwritev: use and support qiov_offset")
Reported-by: Claudio Fontana <cfontana@suse.de>
Reported-by: Bruce Rogers <brogers@suse.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200728120806.265916-2-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Claudio Fontana <cfontana@suse.de>
Tested-by: Bruce Rogers <brogers@suse.com>
|
|
Make the capitalization of the hexadecimal numbers consistent for the
QCOW2 header extension constants in docs/interop/qcow2.txt.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1594973699-781898-2-git-send-email-andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
We should check whether the user-specified node-name actually refers to
a node. The simplest way to do that is to use bdrv_lookup_bs() instead
of bdrv_find_node() (the former wraps the latter, and produces an error
message if necessary).
Reported-by: Coverity (CID 1430268)
Fixes: ced914d0ab9fb2c900f873f6349a0b8eecd1fdbe
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200710095037.10885-1-mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
|
|
Block layer patches:
- file-posix: Handle `EINVAL` fallocate return value
- qemu-img convert -n: Keep qcow2 v2 target sparse
# gpg: Signature made Tue 21 Jul 2020 16:45:28 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: Test sparseness for qemu-img convert -n
qcow2: Implement v2 zero writes with discard if possible
file-posix: Handle `EINVAL` fallocate return value
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
QOM patches for 2020-07-21
# gpg: Signature made Tue 21 Jul 2020 16:40:27 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qom-2020-07-21:
qom: Make info qom-tree sort children more efficiently
qom: Document object_get_canonical_path() returns malloced string
qom: Change object_get_canonical_path_component() not to malloc
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
qcow2 version 2 images don't support the zero flag for clusters, so for
write_zeroes requests, we return -ENOTSUP and get explicit zero buffer
writes. If the image doesn't have a backing file, we can do better: Just
discard the respective clusters.
This is relevant for 'qemu-img convert -O qcow2 -n', where qemu-img has
to assume that the existing target image may contain any data, so it has
to write zeroes. Without this patch, this results in a fully allocated
target image, even if the source image was empty.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200721135520.72355-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The `detect-zeroes=unmap` option may issue unaligned
`FALLOC_FL_PUNCH_HOLE` requests, raw block devices can (and will) return
`EINVAL`, qemu should then write the zeroes to the blockdev instead of
issuing an `IO_ERROR`.
The problem can be reprodced like this:
$ qemu-io -c 'write -P 0 42 1234' --image-opts driver=host_device,filename=/dev/loop0,detect-zeroes=unmap
write failed: Invalid argument
Signed-off-by: Antoine Damhet <antoine.damhet@blade-group.com>
Message-Id: <20200717135603.51180-1-antoine.damhet@blade-group.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
object_get_canonical_path_component() returns a malloced copy of a
property name on success, null on failure.
19 of its 25 callers immediately free the returned copy.
Change object_get_canonical_path_component() to return the property
name directly. Since modifying the name would be wrong, adjust the
return type to const char *.
Drop the free from the 19 callers become simpler, add the g_strdup()
to the other six.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
|
|
bdrv_aio_cancel() calls aio_poll() on the AioContext for the given I/O
request until it has completed. ENOMEDIUM requests are special because
there is no BlockDriverState when the drive has no medium!
Define a .get_aio_context() function for BlkAioEmAIOCB requests so that
bdrv_aio_cancel() can find the AioContext where the completion BH is
pending. Without this function bdrv_aio_cancel() aborts on ENOMEDIUM
requests!
libFuzzer triggered the following assertion:
cat << EOF | qemu-system-i386 -M pc-q35-5.0 \
-nographic -monitor none -serial none \
-qtest stdio -trace ide\*
outl 0xcf8 0x8000fa24
outl 0xcfc 0xe106c000
outl 0xcf8 0x8000fa04
outw 0xcfc 0x7
outl 0xcf8 0x8000fb20
write 0x0 0x3 0x2780e7
write 0xe106c22c 0xd 0x1130c218021130c218021130c2
write 0xe106c218 0x15 0x110010110010110010110010110010110010110010
EOF
ide_exec_cmd IDE exec cmd: bus 0x56170a77a2b8; state 0x56170a77a340; cmd 0xe7
ide_reset IDEstate 0x56170a77a340
Aborted (core dumped)
(gdb) bt
#1 0x00007ffff4f93895 in abort () at /lib64/libc.so.6
#2 0x0000555555dc6c00 in bdrv_aio_cancel (acb=0x555556765550) at block/io.c:2745
#3 0x0000555555dac202 in blk_aio_cancel (acb=0x555556765550) at block/block-backend.c:1546
#4 0x0000555555b1bd74 in ide_reset (s=0x555557213340) at hw/ide/core.c:1318
#5 0x0000555555b1e3a1 in ide_bus_reset (bus=0x5555572132b8) at hw/ide/core.c:2422
#6 0x0000555555b2aa27 in ahci_reset_port (s=0x55555720eb50, port=2) at hw/ide/ahci.c:650
#7 0x0000555555b29fd7 in ahci_port_write (s=0x55555720eb50, port=2, offset=44, val=16) at hw/ide/ahci.c:360
#8 0x0000555555b2a564 in ahci_mem_write (opaque=0x55555720eb50, addr=556, val=16, size=1) at hw/ide/ahci.c:513
#9 0x000055555598415b in memory_region_write_accessor (mr=0x55555720eb80, addr=556, value=0x7fffffffb838, size=1, shift=0, mask=255, attrs=...) at softmmu/memory.c:483
Looking at bdrv_aio_cancel:
2728 /* async I/Os */
2729
2730 void bdrv_aio_cancel(BlockAIOCB *acb)
2731 {
2732 qemu_aio_ref(acb);
2733 bdrv_aio_cancel_async(acb);
2734 while (acb->refcnt > 1) {
2735 if (acb->aiocb_info->get_aio_context) {
2736 aio_poll(acb->aiocb_info->get_aio_context(acb), true);
2737 } else if (acb->bs) {
2738 /* qemu_aio_ref and qemu_aio_unref are not thread-safe, so
2739 * assert that we're not using an I/O thread. Thread-safe
2740 * code should use bdrv_aio_cancel_async exclusively.
2741 */
2742 assert(bdrv_get_aio_context(acb->bs) == qemu_get_aio_context());
2743 aio_poll(bdrv_get_aio_context(acb->bs), true);
2744 } else {
2745 abort(); <===============
2746 }
2747 }
2748 qemu_aio_unref(acb);
2749 }
Fixes: 02c50efe08736116048d5fc355043080f4d5859c ("block: Add bdrv_aio_cancel_async")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Buglink: https://bugs.launchpad.net/qemu/+bug/1878255
Originally-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200720100141.129739-1-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
My commit 'block/crypto: implement the encryption key management'
accidently allowed raw luks images to be shared between different
qemu processes without share-rw=on explicit override.
Fix that.
Fixes: bbfdae91fb ("block/crypto: implement the encryption key management")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1857490
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200719122059.59843-2-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-4-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
For Linux block devices, being able to open the device read-write
doesn't necessarily mean that the device is actually writable (one
example is a read-only LV, as you get with lvchange -pr <device>). We
have check_hdev_writable() to check this condition and fail opening the
image read-write if it's not actually writable.
However, this check doesn't take auto-read-only into account, but
results in a hard failure instead of downgrading to read-only where
possible.
Fix this and do the writable check not based on BDRV_O_RDWR, but only
when this actually results in opening the file read-write. A second
check is inserted in raw_reconfigure_getfd() to have the same check when
dynamic auto-read-only upgrades an image file from read-only to
read-write.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We'll need to call it in raw_open_common(), so move the function to
avoid a forward declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since commit a6b257a08e3 ('file-posix: Handle undetectable alignment'),
we assume that if we open a file with O_DIRECT and alignment probing
returns 1, we just couldn't find out the real alignment requirement
because some filesystems make the requirement only for allocated blocks.
In this case, a safe default of 4k is used.
This is too strict for NFS, which does actually allow byte-aligned
requests even with O_DIRECT. Because we can't distinguish both cases
with generic code, let's just look at the file system magic and disable
s->needs_alignment for NFS. This way, O_DIRECT can still be used on NFS
for images that are not aligned to 4k.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200716142601.111237-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The vxhs code doesn't compile since v2.12.0. There's no point in fixing
and then adding CI for a config that our users have demonstrated that
they do not use; better to just remove it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200711065926.2204721-1-marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block layer patches:
- file-posix: Mitigate file fragmentation with extent size hints
- Tighten qemu-img rules on missing backing format
- qemu-img map: Don't limit block status request size
- Fix crash with virtio-scsi and iothreads
# gpg: Signature made Tue 14 Jul 2020 14:24:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block: Avoid stale pointer dereference in blk_get_aio_context()
qemu-img: Deprecate use of -b without -F
block: Add support to warn on backing file change without format
iotests: Specify explicit backing format where sensible
qcow2: Deprecate use of qemu-img amend to change backing file
block: Error if backing file fails during creation without -u
qcow: Tolerate backing_fmt=
vmdk: Add trivial backing_fmt support
sheepdog: Add trivial backing_fmt support
block: Finish deprecation of 'qemu-img convert -n -o'
qemu-img: Flush stdout before before potential stderr messages
file-posix: Mitigate file fragmentation with extent size hints
iotests/059: Filter out disk size with more standard filter
qemu-img map: Don't limit block status request size
iotests: Simplify _filter_img_create() a bit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
It is possible for blk_remove_bs() to race with blk_drain_all(), causing
the latter to dereference a stale blk->root pointer:
blk_remove_bs(blk)
bdrv_root_unref_child(blk->root)
child_bs = blk->root->bs
bdrv_detach_child(blk->root)
...
g_free(blk->root) <============== blk->root becomes stale
bdrv_unref(child_bs) <============ yield at some point
A blk_drain_all() can be triggered by some guest action in the
meantime, eg. on POWER, SLOF might disable bus mastering on
a virtio-scsi-pci device:
virtio_write_config()
virtio_pci_stop_ioeventfd()
virtio_bus_stop_ioeventfd()
virtio_scsi_dataplane_stop()
blk_drain_all()
blk_get_aio_context()
bs = blk->root ? blk->root->bs : NULL
^^^^^^^^^
stale
Then, depending on one's luck, QEMU either crashes with SEGV or
hits the assertion in blk_get_aio_context().
blk->root is set by blk_insert_bs() which calls bdrv_root_attach_child()
first. The blk_remove_bs() function should rollback the changes made
by blk_insert_bs() in the opposite order (or it should be documented
somewhere why this isn't the case). Clear blk->root before calling
bdrv_root_unref_child() in blk_remove_bs().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159430264541.389456.11925072456012783045.stgit@bahia.lan>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
For now, this is a mechanical addition; all callers pass false. But
the next patch will use it to improve 'qemu-img rebase -u' when
selecting a backing file with no format.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <20200706203954.341758-10-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The use of 'qemu-img amend' to change qcow2 backing files is not
tested very well. In particular, our implementation has a bug where
if a new backing file is provided without a format, then the prior
format is blindly reused, even if this results in data corruption, but
this is not caught by iotests.
There are also situations where amending other options needs access to
the original backing file (for example, on a downgrade to a v2 image,
knowing whether a v3 zero cluster must be allocated or may be left
unallocated depends on knowing whether the backing file already reads
as zero), but the command line does not have a nice way to tell us
both the backing file to use for opening the image as well as the
backing file to install after the operation is complete.
Even if we do allow changing the backing file, it is redundant with
the existing ability to change backing files via 'qemu-img rebase -u'.
It is time to deprecate this support (leaving the existing behavior
intact, even if it is buggy), and at a point in the future, require
the use of only 'qemu-img rebase' for adjusting backing chain
relations, saving 'qemu-img amend' for changes unrelated to the
backing chain.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-8-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qcow has no space in the metadata to store a backing format, and there
are existing qcow images backed both by raw or by other formats
(usually qcow) images, reliant on probing to tell the difference. On
the bright side, because we probe every time, raw files are marked as
probed and we thus forbid a commit action into the backing file where
guest-controlled contents could change the result of the probe next
time around (the iotest added here proves that).
Still, allowing the user to specify the backing format during
creation, even if we can't record it, is a good thing. This patch
blindly allows any value that resolves to a known driver, even if the
user's request is a mismatch from what probing finds; then the next
patch will further enhance things to verify that the user's request
matches what we actually probe. With this and the next patch in
place, we will finally be ready to deprecate the creation of images
where a backing format was not explicitly specified by the user.
Note that this is only for QemuOpts usage; there is no change to the
QAPI to allow a format through -blockdev.
Add a new iotest 301 just for qcow, to demonstrate the latest
behavior, and to make it easier to show the improvements made in the
next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-6-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
vmdk already requires that if backing_file is present, that it be
another vmdk image (see vmdk_co_do_create). Meanwhile, we want to
move towards always being explicit about the backing format for other
drivers where it matters. So for convenience, make qemu-img create -F
vmdk work, while rejecting all other explicit formats (note that this
is only for QemuOpts usage; there is no change to the QAPI to allow a
format through -blockdev).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-5-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Sheepdog already requires that if backing_file is present, that it be
another sheepdog image (see sd_co_create). Meanwhile, we want to move
towards always being explicit about the backing format for other
drivers where it matters. So for convenience, make qemu-img create -F
sheepdog work, while rejecting all other explicit formats (note that
this is only for QemuOpts usage; there is no change to the QAPI to
allow a format through -blockdev).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-4-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Especially when O_DIRECT is used with image files so that the page cache
indirection can't cause a merge of allocating requests, the file will
fragment on the file system layer, with a potentially very small
fragment size (this depends on the requests the guest sent).
On Linux, fragmentation can be reduced by setting an extent size hint
when creating the file (at least on XFS, it can't be set any more after
the first extent has been allocated), basically giving raw files a
"cluster size" for allocation.
This adds a create option to set the extent size hint, and changes the
default from not setting a hint to setting it to 1 MB. The main reason
why qcow2 defaults to smaller cluster sizes is that COW becomes more
expensive, which is not an issue with raw files, so we can choose a
larger size. The tradeoff here is only potentially wasted disk space.
For qcow2 (or other image formats) over file-posix, the advantage should
even be greater because they grow sequentially without leaving holes, so
there won't be wasted space. Setting even larger extent size hints for
such images may make sense. This can be done with the new option, but
let's keep the default conservative for now.
The effect is very visible with a test that intentionally creates a
badly fragmented file with qemu-img bench (the time difference while
creating the file is already remarkable) and then looks at the number of
extents and the time a simple "qemu-img map" takes.
Without an extent size hint:
$ ./qemu-img create -f raw -o extent_size_hint=0 ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=0
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 25.848 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 19.616 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 2000000 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m1,279s
user 0m0,043s
sys 0m1,226s
With the new default extent size hint of 1 MB:
$ ./qemu-img create -f raw -o extent_size_hint=1M ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=1048576
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 11.833 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 10.155 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 178 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m0,061s
user 0m0,040s
sys 0m0,014s
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200707142329.48303-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When snprintf returns the same value as the buffer size, the final
byte was truncated to ensure a NUL terminator. Fortunately, such long
export names are unusual enough, with no real impact other than what
is displayed to the user.
Fixes: 5c86bdf12089
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200622210355.414941-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
