| Age | Commit message (Collapse) | Author |
|---|
|
Commit 205fa50750 ("qcow2: Add subcluster support to zero_in_l2_slice()")
introduced a subtle change to code in zero_in_l2_slice:
It swapped the order of
1. qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
2. set_l2_entry(s, l2_slice, l2_index + i, QCOW_OFLAG_ZERO);
3. qcow2_free_any_clusters(bs, old_offset, 1, QCOW2_DISCARD_REQUEST);
To
1. qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
2. qcow2_free_any_clusters(bs, old_offset, 1, QCOW2_DISCARD_REQUEST);
3. set_l2_entry(s, l2_slice, l2_index + i, QCOW_OFLAG_ZERO);
It seems harmless, however the call to qcow2_free_any_clusters can
trigger a cache flush which can mark the L2 table as clean, and
assuming that this was the last write to it, a stale version of it
will remain on the disk.
Now we have a valid L2 entry pointing to a freed cluster. Oops.
Fixes: 205fa50750 ("qcow2: Add subcluster support to zero_in_l2_slice()")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[ kwolf: Fixed to restore the correct original order from before
205fa50750; added comments like in discard_in_l2_slice(). ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201124092815.39056-1-kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
'remotes/stefanha-gitlab/tags/block-pull-request' into staging
Pull request for 5.2
NVMe fixes to solve IOMMU issues on non-x86 and error message/tracing
improvements. Elena Afanasova's ioeventfd fixes are also included.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# gpg: Signature made Wed 04 Nov 2020 15:18:16 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha-gitlab/tags/block-pull-request: (33 commits)
util/vfio-helpers: Assert offset is aligned to page size
util/vfio-helpers: Convert vfio_dump_mapping to trace events
util/vfio-helpers: Improve DMA trace events
util/vfio-helpers: Trace where BARs are mapped
util/vfio-helpers: Trace PCI BAR region info
util/vfio-helpers: Trace PCI I/O config accesses
util/vfio-helpers: Improve reporting unsupported IOMMU type
block/nvme: Fix nvme_submit_command() on big-endian host
block/nvme: Fix use of write-only doorbells page on Aarch64 arch
block/nvme: Align iov's va and size on host page size
block/nvme: Change size and alignment of prp_list_pages
block/nvme: Change size and alignment of queue
block/nvme: Change size and alignment of IDENTIFY response buffer
block/nvme: Correct minimum device page size
block/nvme: Set request_alignment at initialization
block/nvme: Simplify nvme_cmd_sync()
block/nvme: Simplify ADMIN queue access
block/nvme: Correctly initialize Admin Queue Attributes
block/nvme: Use definitions instead of magic values in add_io_queue()
block/nvme: Introduce Completion Queue definitions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Patches for 5.2.0-rc2:
- quorum: Fix crash with rewrite-corrupted and without read-write user
- io_uring: do not use pointer after free
- file-posix: Use fallback path for -EBUSY from FALLOC_FL_PUNCH_HOLE
- iotests: Fix failure on Python 3.9 due to use of a deprecated function
- char-stdio: Fix QMP default for 'signal'
# gpg: Signature made Tue 17 Nov 2020 11:43:17 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests/081: Test rewrite-corrupted without WRITE
iotests/081: Filter image format after testdir
quorum: Require WRITE perm with rewrite-corrupted
io_uring: do not use pointer after free
file-posix: allow -EBUSY errors during write zeros on raw block devices
iotests: Replace deprecated ConfigParser.readfp()
char-stdio: Fix QMP default for 'signal'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
pc,vhost: fixes
Fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 17 Nov 2020 09:17:12 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
vhost-user-blk/scsi: Fix broken error handling for socket call
contrib/libvhost-user: Fix bad printf format specifiers
hw/i386/acpi-build: Fix maybe-uninitialized error when ACPI hotplug off
configure: mark vhost-user Linux-only
vhost-user-blk-server: depend on CONFIG_VHOST_USER
meson: move vhost_user_blk_server to meson.build
vhost-user: fix VHOST_USER_ADD/REM_MEM_REG truncation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# meson.build
|
|
Using rewrite-corrupted means quorum may issue writes to its children
just from receiving read requests from its parents. Thus, it must take
the WRITE permission when rewrite-corrupted is used.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201113211718.261671-2-mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Even though only the pointer value is only printed, it is untidy
and Coverity complains.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201113154102.1460459-1-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
On Linux, fallocate(fd, FALLOC_FL_PUNCH_HOLE) when it is used on a block device,
without O_DIRECT can return -EBUSY if it races with another write to the same page.
Since this is rare and discard is not a critical operation, ignore this error
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201111153913.41840-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The --enable/disable-vhost-user-blk-server options were implemented in
./configure. There has been confusion about them and part of the problem
is that the shell syntax used for setting the default value is not easy
to read. Move the option over to meson where the conditions are easier
to understand:
have_vhost_user_blk_server = (targetos == 'linux')
if get_option('vhost_user_blk_server').enabled()
if targetos != 'linux'
error('vhost_user_blk_server requires linux')
endif
elif get_option('vhost_user_blk_server').disabled() or not have_system
have_vhost_user_blk_server = false
endif
This patch does not change behavior.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201110171121.1265142-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
There have some code style problems be found when read the block driver code.
So I fixes some problems of this error, ERROR: "foo* bar" should be "foo *bar".
Signed-off-by: Liyang Shi <shiliyang@huawei.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Message-Id: <3211f389-6d22-46c1-4a16-e6a2ba66f070@huawei.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
These compiling errors are fixed:
../block/nfs.c:27:10: fatal error: poll.h: No such file or directory
27 | #include <poll.h>
| ^~~~~~~~
compilation terminated.
../block/nfs.c:63:5: error: unknown type name 'blkcnt_t'
63 | blkcnt_t st_blocks;
| ^~~~~~~~
../block/nfs.c: In function 'nfs_client_open':
../block/nfs.c:550:27: error: 'struct _stat64' has no member named 'st_blocks'
550 | client->st_blocks = st.st_blocks;
| ^
../block/nfs.c: In function 'nfs_get_allocated_file_size':
../block/nfs.c:751:41: error: 'struct _stat64' has no member named 'st_blocks'
751 | return (task.ret < 0 ? task.ret : st.st_blocks * 512);
| ^
../block/nfs.c: In function 'nfs_reopen_prepare':
../block/nfs.c:805:31: error: 'struct _stat64' has no member named 'st_blocks'
805 | client->st_blocks = st.st_blocks;
| ^
../block/nfs.c: In function 'nfs_get_allocated_file_size':
../block/nfs.c:752:1: error: control reaches end of non-void function [-Werror=return-type]
752 | }
| ^
On msys2/mingw, there is no st_blocks in struct _stat64 yet, we disable the usage of it
on msys2/mingw, and create a typedef long long blkcnt_t; for further implementation
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201105123116.674-2-luoyonggang@gmail.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The QCowL2Meta structure is used to store information about a part of
a write request that touches clusters that need changes in their L2
entries. This happens with newly-allocated clusters or subclusters.
This structure has changed a bit since it was first created and its
current documentation is not quite up-to-date.
A write request can span a region consisting of a combination of
clusters of different types, and qcow2_alloc_host_offset() can
repeatedly call handle_copied() and handle_alloc() to add more
clusters to the mix as long as they all are contiguous on the image
file.
Because of this a write request has a list of QCowL2Meta structures,
one for each part of the request that needs changes in the L2
metadata.
Each one of them spans nb_clusters and has two copy-on-write regions
located immediately before and after the middle region touched by that
part of the write request. Even when those regions themselves are
empty their offsets must be correct because they are used to know the
location of the middle region.
This was not always the case but it is not a problem anymore
because the only two places where QCowL2Meta structures are created
(calculate_l2_meta() and qcow2_co_truncate()) ensure that the
copy-on-write regions are correctly defined, and so do assertions like
the ones in perform_cow().
The conditional initialization of the 'written_to' variable is
therefore unnecessary and is removed by this patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201007161323.4667-1-berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The "qemu-common.h" include is not used, remove it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Message-Id: <5F8FFB94.3030209@huawei.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
pc,pci,vhost,virtio: fixes
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 04 Nov 2020 18:40:03 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
contrib/vhost-user-blk: fix get_config() information leak
block/export: fix vhost-user-blk get_config() information leak
block/export: make vhost-user-blk config space little-endian
configure: introduce --enable-vhost-user-blk-server
libvhost-user: follow QEMU comment style
vhost-blk: set features before setting inflight feature
Revert "vhost-blk: set features before setting inflight feature"
net: Add vhost-vdpa in show_netdevs()
vhost-vdpa: Add qemu_close in vhost_vdpa_cleanup
vfio: Don't issue full 2^64 unmap
virtio-iommu: Set supported page size mask
vfio: Set IOMMU page size as per host supported page size
memory: Add interface to set iommu page size mask
virtio-iommu: Add notify_flag_changed() memory region callback
virtio-iommu: Add replay() memory region callback
virtio-iommu: Call memory notifiers in attach/detach
virtio-iommu: Add memory notifiers for map/unmap
virtio-iommu: Store memory region in endpoint struct
virtio-iommu: Fix virtio_iommu_mr()
hw/smbios: Fix leaked fd in save_opt_one() error path
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Refuse get_config() requests in excess of sizeof(struct virtio_blk_config).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
VIRTIO 1.0 devices have little-endian configuration space. The
vhost-user-blk-server.c code already uses little-endian for virtqueue
processing but not for the configuration space fields. Fix this so the
vhost-user-blk export works on big-endian hosts.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Make it possible to compile out the vhost-user-blk server. It is enabled
by default on Linux.
Note that vhost-user-server.c depends on libvhost-user, which requires
CONFIG_LINUX. The CONFIG_VHOST_USER dependency was erroneous since that
option controls vhost-user frontends (previously known as "master") and
not device backends (previously known as "slave").
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The Completion Queue Command Identifier is a 16-bit value,
so nvme_submit_command() is unlikely to work on big-endian
hosts, as the relevant bits are truncated.
Fix by using the correct byte-swap function.
Fixes: bdd6a90a9e5 ("block: Add VFIO based NVMe driver")
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201029093306.1063879-25-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
qemu_vfio_pci_map_bar() calls mmap(), and mmap(2) states:
'offset' must be a multiple of the page size as returned
by sysconf(_SC_PAGE_SIZE).
In commit f68453237b9 we started to use an offset of 4K which
broke this contract on Aarch64 arch.
Fix by mapping at offset 0, and and accessing doorbells at offset=4K.
Fixes: f68453237b9 ("block/nvme: Map doorbells pages write-only")
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-24-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
Make sure iov's va and size are properly aligned on the
host page size.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-23-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
In preparation of 64kB host page support, let's change the size
and alignment of the prp_list_pages so that the VFIO DMA MAP succeeds
with 64kB host page size. We align on the host page size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-22-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
In preparation of 64kB host page support, let's change the size
and alignment of the queue so that the VFIO DMA MAP succeeds.
We align on the host page size.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-21-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
In preparation of 64kB host page support, let's change the size
and alignment of the IDENTIFY command response buffer so that
the VFIO DMA MAP succeeds. We align on the host page size.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-20-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
While trying to simplify the code using a macro, we forgot
the 12-bit shift... Correct that.
Fixes: fad1eb68862 ("block/nvme: Use register definitions from 'block/nvme.h'")
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-19-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
Commit bdd6a90a9e5 ("block: Add VFIO based NVMe driver")
sets the request_alignment in nvme_refresh_limits().
For consistency, also set it during initialization.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-18-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
As all commands use the ADMIN queue, it is pointless to pass
it as argument each time. Remove the argument, and rename the
function as nvme_admin_cmd_sync() to make this new behavior
clearer.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201029093306.1063879-17-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
We don't need to dereference from BDRVNVMeState each time.
Use a NVMeQueuePair pointer on the admin queue.
The nvme_init() becomes easier to review, matching the style
of nvme_add_io_queue().
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-16-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
From the specification chapter 3.1.8 "AQA - Admin Queue Attributes"
the Admin Submission Queue Size field is a 0’s based value:
Admin Submission Queue Size (ASQS):
Defines the size of the Admin Submission Queue in entries.
Enabling a controller while this field is cleared to 00h
produces undefined results. The minimum size of the Admin
Submission Queue is two entries. The maximum size of the
Admin Submission Queue is 4096 entries.
This is a 0’s based value.
This bug has never been hit because the device initialization
uses a single command synchronously :)
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-15-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
Replace magic values by definitions, and simplifiy since the
number of queues will never reach 64K.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-14-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value indicating an error is set or not.
Directly pass errp as the local_err is not requested in our
case. This simplifies a bit nvme_create_queue_pair().
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-12-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value indicating an error is set or not.
Directly pass errp as the local_err is not requested in our
case.
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201029093306.1063879-11-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
We can not have negative queue count/size/index, use unsigned type.
Rename 'nr_queues' as 'queue_count' to match the spec naming.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-10-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
To be able to use some definitions in structure declarations,
move them earlier. No logical change.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-9-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-8-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
What we want to trace is the block driver state and the queue index.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-7-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
As we want to enable multiple queues, report the event
in each nvme_poll_queue() call, rather than once in
the callback calling nvme_poll_queues().
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-6-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
Controllers have different capabilities and report them in the
CAP register. We are particularly interested by the page size
limits.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
Instead of displaying warning on stderr, use warn_report()
which also displays it on the monitor.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
Use the same format used for the hw/vfio/ trace events.
Suggested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
|
|
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
In addition, fix two error format problems found by checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
+ fprintf(stderr,"%s attributes=0x%02x begin=%u size=%d\n",
^
ERROR: line over 90 characters
+ fprintf(stderr, "%d, %s (%u, %d)\n", i, commit->path ? commit->path : "(null)", commit->param.rename.cluster, commit->action);
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA12620.6030705@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Allow the server to expose an additional metacontext to be requested
by savvy clients. qemu-nbd adds a new option -A to expose the
qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this
can also be set via QMP when using block-export-add.
qemu as client is hacked into viewing the key aspects of this new
context by abusing the already-experimental x-dirty-bitmap option to
collapse all depths greater than 2, which results in a tri-state value
visible in the output of 'qemu-img map --output=json' (yes, that means
x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like
renaming it as it would introduce a needless break of back-compat,
even though we make no compat guarantees with x- members):
unallocated (depth 0) => "zero":false, "data":true
local (depth 1) => "zero":false, "data":false
backing (depth 2+) => "zero":true, "data":true
libnbd as client is probably a nicer way to get at the information
without having to decipher such hacks in qemu as client. ;)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-11-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
When checking for allocation across a chain, it's already easy to
count the depth within the chain at which the allocation is found.
Instead of throwing that information away, return it to the caller.
Existing callers only cared about allocated/non-allocated, but having
a depth available will be used by NBD in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-9-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
If a BDS gets deleted during blk_drain_all(), it might miss a
call to bdrv_do_drained_end(). This means missing a call to
aio_enable_external() and the AIO context remains disabled for
ever. This can cause a device to become irresponsive and to
disrupt the guest execution, ie. hang, loop forever or worse.
This scenario is quite easy to encounter with virtio-scsi
on POWER when punching multiple blockdev-create QMP commands
while the guest is booting and it is still running the SLOF
firmware. This happens because SLOF disables/re-enables PCI
devices multiple times via IO/MEM/MASTER bits of PCI_COMMAND
register after the initial probe/feature negotiation, as it
tends to work with a single device at a time at various stages
like probing and running block/network bootloaders without
doing a full reset in-between. This naturally generates many
dataplane stops and starts, and thus many drain sections that
can race with blockdev_create_run(). In the end, SLOF bails
out.
It is somehow reproducible on x86 but it requires to generate
articial dataplane start/stop activity with stop/cont QMP
commands. In this case, seabios ends up looping for ever,
waiting for the virtio-scsi device to send a response to
a command it never received.
Add a helper that pairs all previously called bdrv_do_drained_begin()
with a bdrv_do_drained_end() and call it from bdrv_close().
While at it, update the "/bdrv-drain/graph-change/drain_all"
test in test-bdrv-drain so that it can catch the issue.
BugId: https://bugzilla.redhat.com/show_bug.cgi?id=1874441
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160346526998.272601.9045392804399803158.stgit@bahia.lan>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since commit c8bb23cbdbe32f5c326365e0a82e1b0e68cdcd8a when a write
request results in a new allocation QEMU first tries to see if the
rest of the cluster outside the written area contains only zeroes.
In that case, instead of doing a normal copy-on-write operation and
writing explicit zero buffers to disk, the code zeroes the whole
cluster efficiently using pwrite_zeroes() with BDRV_REQ_NO_FALLBACK.
This improves performance very significantly but it only happens when
we are writing to an area that was completely unallocated before. Zero
clusters (QCOW2_CLUSTER_ZERO_*) are treated like normal clusters and
are therefore slower to allocate.
This happens because the code uses bdrv_is_allocated_above() rather
bdrv_block_status_above(). The former is not as accurate for this
purpose but it is faster. However in the case of qcow2 the underlying
call does already report zero clusters just fine so there is no reason
why we cannot use that information.
After testing 4KB writes on an image that only contains zero clusters
this patch results in almost five times more IOPS.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <6d77cab968c501c44d6e1089b9bc91b04170b49e.1603731354.git.berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If a BlockDriverState supports backing files but has none then any
unallocated area reads back as zeroes.
bdrv_co_block_status() is only reporting this is if want_zero is true,
but this is an inexpensive test and there is no reason not to do it in
all cases.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <66fa0914a0e2b727ab6d1b63ca773d7cd29a9a9e.1603731354.git.berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
staging
* fix --disable-tcg builds (Claudio)
* Fixes for macOS --enable-modules build and OpenBSD curses/iconv detection (myself)
* Start preparing for meson 0.56 (myself)
* Move directory configuration to meson (myself)
* Start untangling qemu_init (myself)
* Windows fixes (Sunil)
* Remove -no-kbm (Thomas)
# gpg: Signature made Mon 26 Oct 2020 11:12:17 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
machine: move SMP initialization from vl.c
machine: move UP defaults to class_base_init
machine: remove deprecated -machine enforce-config-section option
win32: boot broken when bind & data dir are the same
WHPX: Fix WHPX build break
configure: move install_blobs from configure to meson
configure: remove unused variable from config-host.mak
configure: move directory options from config-host.mak to meson
configure: allow configuring localedir
Makefile: separate meson rerun from the rest of the ninja invocation
Remove deprecated -no-kvm option
replay: do not build if TCG is not available
qtest: unbreak non-TCG builds in bios-tables-test
hw/core/qdev-clock: add a reference on aliased clocks
do not use colons in test names
meson: rewrite curses/iconv test
build: fix macOS --enable-modules build
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
bdrv_is_allocated_above wrongly handles short backing files: it reports
after-EOF space as UNALLOCATED which is wrong, as on read the data is
generated on the level of short backing file (if all overlays have
unallocated areas at that place).
Reusing bdrv_common_block_status_above fixes the issue and unifies code
path.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20200924194003.22080-5-vsementsov@virtuozzo.com
[Fix s/has/have/ as suggested by Eric Blake. Fix s/area/areas/.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
We are going to reuse bdrv_common_block_status_above in
bdrv_is_allocated_above. bdrv_is_allocated_above may be called with
include_base == false and still bs == base (for ex. from img_rebase()).
So, support this corner case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20200924194003.22080-4-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
In order to reuse bdrv_common_block_status_above in
bdrv_is_allocated_above, let's support include_base parameter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200924194003.22080-3-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
bdrv_co_block_status_above has several design problems with handling
short backing files:
1. With want_zeros=true, it may return ret with BDRV_BLOCK_ZERO but
without BDRV_BLOCK_ALLOCATED flag, when actually short backing file
which produces these after-EOF zeros is inside requested backing
sequence.
2. With want_zero=false, it may return pnum=0 prior to actual EOF,
because of EOF of short backing file.
Fix these things, making logic about short backing files clearer.
With fixed bdrv_block_status_above we also have to improve is_zero in
qcow2 code, otherwise iotest 154 will fail, because with this patch we
stop to merge zeros of different types (produced by fully unallocated
in the whole backing chain regions vs produced by short backing files).
Note also, that this patch leaves for another day the general problem
around block-status: misuse of BDRV_BLOCK_ALLOCATED as is-fs-allocated
vs go-to-backing.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200924194003.22080-2-vsementsov@virtuozzo.com
[Fix s/comes/come/ as suggested by Eric Blake
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
