| Age | Commit message (Collapse) | Author |
|---|
|
This fixes a regression introduced by commit dcfb3beb ("mirror: Do zero
write on target if sectors not allocated"), which was reported to cause
aborts with the message "Co-routine re-entered recursively".
The cause for this bug is the following code in mirror_iteration_done():
if (s->common.busy) {
qemu_coroutine_enter(s->common.co, NULL);
}
This has always been ugly because - unlike most places that reenter - it
doesn't have a specific yield that it pairs with, but is more
uncontrolled. What we really mean here is "reenter the coroutine if
it's in one of the four explicit yields in mirror.c".
This used to be equivalent with s->common.busy because neither
mirror_run() nor mirror_iteration() call any function that could yield.
However since commit dcfb3beb this doesn't hold true any more:
bdrv_get_block_status_above() can yield.
So what happens is that bdrv_get_block_status_above() wants to take a
lock that is already held, so it adds itself to the queue of waiting
coroutines and yields. Instead of being woken up by the unlock function,
however, it gets woken up by mirror_iteration_done(), which is obviously
wrong.
In most cases the code actually happens to cope fairly well with such
cases, but in this specific case, the unlock must already have scheduled
the coroutine for wakeup when mirror_iteration_done() reentered it. And
then the coroutine happened to process the scheduled restarts and tried
to reenter itself recursively.
This patch fixes the problem by pairing the reenter in
mirror_iteration_done() with specific yields instead of abusing
s->common.busy.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1439455310-11263-1-git-send-email-kwolf@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
If mirror has more free buffers than IOV_MAX, preadv(2)/pwritev(2)
EINVAL failures may be encountered.
It is possible to trigger this by setting granularity to a low value
like 8192.
This patch stops appending chunks once IOV_MAX is reached.
The spurious EINVAL failure can be reproduced with a qcow2 image file
and the following QMP invocation:
qmp.command('drive-mirror', device='virtio0', target='/tmp/r7.s1',
granularity=8192, sync='full', mode='absolute-paths',
format='raw')
While the guest is running dd if=/dev/zero of=/var/tmp/foo oflag=direct
bs=4k.
Cc: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435761950-26714-1-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
Commit 488981a4 [block: convert quorum blockdrv to use crypto APIs]
broke qemu-iotest 041 on hosts with GnuTLS < 2.10.0. It converted a
compile-time check to a run-time check at device open time. The result
is that we now advertise a feature (the quorum block driver) that will
never work (on those hosts). There's no way (short of parsing
human-readable error messages) for qemu-iotests or any other API
consumer to recognise that the quorum block driver isn't _actually_
available and shouldn't be used or tested.
Move the run-time check to bdrv_quorum_init() to avoid registering the
quorum block driver if we know it cannot work. This way API consumers
can recognise it's unavailable.
Fixes: 488981a4af396551a3178d032cc2b41d9553ada2
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1438699705-21761-1-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/cody/tags/jtc-for-upstream-pull-request' into staging
# gpg: Signature made Tue Jul 28 05:22:29 2015 BST using RSA key ID C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057
* remotes/cody/tags/jtc-for-upstream-pull-request:
block/ssh: Avoid segfault if inet_connect doesn't set errno.
sheepdog: serialize requests to overwrapping area
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
On some (but not all) systems:
$ qemu-img create -f qcow2 overlay -b ssh://xen/
Segmentation fault
It turns out this happens when inet_connect returns -1 in the
following code, but errno == 0.
s->sock = inet_connect(s->hostport, errp);
if (s->sock < 0) {
ret = -errno;
goto err;
}
In the test case above, no host called "xen" exists, so getaddrinfo fails.
On Fedora 22, getaddrinfo happens to set errno = ENOENT (although it
is *not* documented to do that), so it doesn't segfault.
On RHEL 7, errno is not set by the failing getaddrinfo, so ret =
-errno = 0, so the caller doesn't know there was an error and
continues with a half-initialized BDRVSSHState struct, and everything
goes south from there, eventually resulting in a segfault.
Fix this by setting ret to -EIO (same as block/nbd.c and
block/sheepdog.c). The real error is saved in the Error** errp
struct, so it is printed correctly:
$ ./qemu-img create -f qcow2 overlay -b ssh://xen/
qemu-img: overlay: address resolution failed for xen:22: No address associated with hostname
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Jun Li
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1147343
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
Current sheepdog driver only serializes create requests in oid
unit. This mechanism isn't enough for handling requests to
overwrapping area spanning multiple oids, so it can result bugs like
below:
https://bugs.launchpad.net/sheepdog-project/+bug/1456421
This patch adds a new serialization mechanism for the problem. The
difference from the old one is:
1. serialize entire aiocb if their targetting areas overwrap
2. serialize all requests (read, write, and discard), not only creates
This patch also removes the old mechanism because the new one can be
an alternative.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Teruaki Ishizaki <ishizaki.teruaki@lab.ntt.co.jp>
Cc: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Tested-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
When we allocate the pagetable based on max_table_entries, we multiply
the max table entry value by 4 to accomodate a table of 32-bit integers.
However, max_table_entries is a uint32_t, and the VPC driver accepts
ranges for that entry over 0x40000000. So during this allocation:
s->pagetable = qemu_try_blockalign(bs->file, s->max_table_entries * 4);
The size arg overflows, allocating significantly less memory than
expected.
Since qemu_try_blockalign() size argument is size_t, cast the
multiplication correctly to prevent overflow.
The value of "max_table_entries * 4" is used elsewhere in the code as
well, so store the correct value for use in all those cases.
We also check the Max Tables Entries value, to make sure that it is <
SIZE_MAX / 4, so we know the pagetable size will fit in size_t.
Cc: qemu-stable@nongnu.org
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Limiting to sectors_per_chunk for each bdrv_is_allocated_above is slow,
because the underlying protocol driver would issue much more queries
than necessary. We should coalesce the query.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: <1436413678-7114-4-git-send-email-famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Currently if qemu is connected to a curl source (eg. web server), and
the web server fails / times out / dies, you always see a bogus EIO
"Input/output error".
For example, choose a large file located on any local webserver which
you control:
$ qemu-img convert -p http://example.com/large.iso /tmp/test
Once it starts copying the file, stop the webserver and you will see
qemu-img fail with:
qemu-img: error while reading sector 61440: Input/output error
This patch does two things: Firstly print the actual error from curl
so it doesn't get lost. Secondly, change EIO to EPROTO. EPROTO is a
POSIX.1 compatible errno which more accurately reflects that there was
a protocol error, rather than some kind of hardware failure.
After this patch is applied, the error changes to:
$ qemu-img convert -p http://example.com/large.iso /tmp/test
qemu-img: curl: transfer closed with 469989 bytes remaining to read
qemu-img: error while reading sector 16384: Protocol error
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
If bus_size is less than 0, the command fails.
If buf_size is 0, use DEFAULT_MIRROR_BUF_SIZE.
If buf_size % granularity is not 0, mirror_free_init() will
do dangerous things.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 5555A588.3080907@cn.fujitsu.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
Reclaim the dirty bitmap if an incremental backup block job is
cancelled. The ret variable may be 0 when the job is cancelled so it's
not enough to check ret < 0.
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1434380534-7680-1-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
Before, we only yield after initializing dirty bitmap, where the QMP
command would return. That may take very long, and guest IO will be
blocked.
Add sleep points like the later mirror iterations.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1431486673-19280-1-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
Apply the ceph settings from a config file before any ceph settings
from the command line. Since the ceph config file location may be
specified on the command line, parse it once to read the config file,
and do a second pass to apply the rest of the command line ceph
options.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
To be safe, when cache=none is used ceph settings should not be able
to override it to turn on caching. This was previously possible with
rbd_cache=true in the rbd device configuration or a ceph configuration
file. Similarly, rbd settings could have turned off caching when qemu
requested it, although this would just be a performance problem.
Fix this by changing rbd's cache setting to match qemu after all other
ceph settings have been applied.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
RBDAIOCB.status was only used for cancel, which was removed in
7691e24dbebb46658e89b3f950fda6ec78bbb823.
RBDAIOCB.sector_num was never used.
RADOSCB.done and rcbid were never used.
RBD_FD* are obsolete since the pipe was removed in
e04fb07fd1676e9facd7f3f878c1bbe03bccd26b.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Bugfixes and Daniel Berrange's crypto library.
# gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ossaudio: fix memory leak
ui: convert VNC to use generic cipher API
block: convert qcow/qcow2 to use generic cipher API
ui: convert VNC websockets to use crypto APIs
block: convert quorum blockdrv to use crypto APIs
crypto: add a nettle cipher implementation
crypto: add a gcrypt cipher implementation
crypto: introduce generic cipher API & built-in implementation
crypto: move built-in D3DES implementation into crypto/
crypto: move built-in AES implementation into crypto/
crypto: introduce new module for computing hash digests
vl: move rom_load_all after machine init done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Switch the qcow/qcow2 block driver over to use the generic cipher
API, this allows it to use the pluggable AES implementations,
instead of being hardcoded to use QEMU's built-in impl.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-10-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Get rid of direct use of gnutls APIs in quorum blockdrv in
favour of using the crypto APIs. This avoids the need to
do conditional compilation of the quorum driver. It can
simply report an error at file open file instead if the
required hash algorithm isn't supported by QEMU.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-8-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is job resource leak in function mirror_start_job,
although bdrv_create_dirty_bitmap is unlikely failed.
Add block_job_release for each release when needed.
Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1435311455-56048-1-git-send-email-kathy.wangting@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
In libguestfs we use /dev/fd/<NN> to pass pre-opened file descriptors
to qemu-img. Lately I've discovered that although this works, qemu
believes that these are floppy disk images. That in itself isn't much
of a problem, but now qemu prints a warning about host floppy
pass-thru being deprecated.
Extend the existing test so that it ignores /dev/fd/ as well as
/dev/fdset/
A simple test of this, if you are using the bash shell, is:
qemu-img info <( cat /dev/null )
without this patch:
$ qemu-img info <( cat /dev/null )
qemu-img: Host floppy pass-through is deprecated
Support for it will be removed in a future release.
qemu-img: Could not open '/dev/fd/63': Could not refresh total sector count: Illegal seek
with this patch:
$ qemu-img info <( cat /dev/null )
qemu-img: Could not open '/dev/fd/63': Could not refresh total sector count: Illegal seek
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1435761614-31358-1-git-send-email-rjones@redhat.com
Fixes: https://bugs.launchpad.net/qemu/+bug/1470536
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
There callers work on a single BlockDriverState subtree, where using
bdrv_drain() is more accurate.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
To prepare for a generic internal cipher API, move the
built-in AES implementation into the crypto/ directory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The doc comments for bdrv_drain_all() and bdrv_drain() are outdated:
* The bdrv_drain() comment is a poor man's bdrv_lock()/bdrv_unlock()
which Fam Zheng is currently developing. Unfortunately this warning
was never really enough because devices keep submitting I/O and op
blockers don't prevent that.
* The bdrv_drain_all() comment is still partially correct but reflects
the nature of the implementation rather than API documentation.
Do make it clear that bdrv_drain() is only appropriate within an
AioContext. For anything spanning AioContexts you need
bdrv_drain_all().
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1435854281-6078-1-git-send-email-stefanha@redhat.com
|
|
The value of 'i' is guaranteed to be >= 0
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1435824371-2660-1-git-send-email-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
An empty GSList is represented by a NULL pointer, therefore it's a
perfectly valid argument for g_slist_find() and there's no need to
make any additional check.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1435583533-5758-1-git-send-email-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
a malicious caller could otherwise specify a very
large value via the URI and force libnfs to allocate
a large amount of memory for the readahead buffer.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1435317241-25585-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
RHEL7 and others are stuck with libiscsi 1.9.0 since there
unfortunately was an ABI breakage after that release.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435313881-19366-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Unsetting dirty globally with discard is not very correct. The discard may zero
out sectors (depending on can_write_zeroes_with_unmap), we should replicate
this change to destination side to make sure that the guest sees the same data.
Calling bdrv_reset_dirty also troubles mirror job because the hbitmap iterator
doesn't expect unsetting of bits after current position.
So let's do it the opposite way which fixes both problems: set the dirty bits
if we are to discard it.
Reported-by: wangxiaolong@ucloud.cn
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
If guest discards a source cluster, mirroring with bdrv_aio_readv is overkill.
Some protocols do zero upon discard, where it's best to use
bdrv_aio_write_zeroes, otherwise, bdrv_aio_discard will be enough.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
If specified as "true", it allows discarding on target sectors where source is
not allocated.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Like bdrv_is_allocated_above, this function follows the backing chain until seeing
BDRV_BLOCK_ALLOCATED. Base is not included.
Reimplement bdrv_is_allocated on top.
[Initialized bdrv_co_get_block_status_above() ret to 0 to silence
mingw64 compiler warning about the unitialized variable. assert(bs !=
base) prevents that case but I suppose the program could be compiled
with -DNDEBUG.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
If we wish to make differential backups a feature that's easy to access,
it might be pertinent to rename the "dirty-bitmap" mode to "incremental"
to make it clear what /type/ of backup the dirty-bitmap is helping us
perform.
This is an API breaking change, but 2.4 has not yet gone live,
so we have this flexibility.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1433463642-21840-2-git-send-email-jsnow@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Fixes a crash during image compression
Signed-off-by: Jindřich Makovička <makovick@gmail.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
libiscsi starting with 1.15 will properly support timeout of iscsi
commands. The default will remain no timeout, but this can
be changed via cmdline parameters, e.g.:
qemu -iscsi timeout=30 -drive file=iscsi://...
If a timeout occurs a reconnect is scheduled and the timed out command
will be requeued for processing after a successful reconnect.
The required API call iscsi_set_timeout is present since libiscsi
1.10 which was released in October 2013. However, due to some bugs
in the libiscsi code the use is not recommended before version 1.15.
Please note that this patch bumps the libiscsi requirement to 1.10
to have all function and macros defined. The patch fixes also a
off-by-one error in the NOP timeout calculation which was fixed
while touching these code parts.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1434455107-19328-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Until now, an SG device was identified only by checking if its path
started with "/dev/sg". Then, hdev_open() would set the bs->sg flag
accordingly. The patch relies on the actual properties of the device
instead of the specified file path.
To this end, test for an SG device (e.g. /dev/sg0) by ensuring that
all of the following holds:
- The specified file name corresponds to a character device
- The device supports the SG_GET_VERSION_NUM ioctl
- The device supports the SG_GET_SCSI_ID ioctl
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Message-id: 1435056300-14924-6-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Get rid of several #ifdef DEBUG_FLOPPY and substitute them with
DPRINTF.
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-5-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Building the QEMU tools fails if we #define DEBUG_BLOCK inside
block/raw-posix.c. Here instead of adding qemu-log.o in block-obj-y
so that DEBUG_BLOCK_PRINT can be used, we substitute the latter with
a simple DPRINTF() (that does not cause bit-rot).
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-4-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
During migration, QEMU uses fsync()/fdatasync() on the open file
descriptor for read-write block devices to flush data just before
stopping the VM.
However, fsync() on a scsi-generic device returns -EINVAL which
causes the migration to fail. This patch skips flushing data in case
of an SG device, since submitting SCSI commands directly via an SG
character device (e.g. /dev/sg0) bypasses the page cache completely,
anyway.
Note that fsync() not only flushes the page cache but also the disk
cache. The scsi-generic device never sends flushes, and for
migration it assumes that the same SCSI device is used by the
destination host, so it does not issue any SCSI SYNCHRONIZE CACHE
(10) command.
Finally, remove the bdrv_is_sg() test from iscsi_co_flush() since
this is now redundant (we flush the underlying protocol at the end
of bdrv_co_flush() which, with this patch, we never reach).
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-3-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Instead of checking bs->sg use bdrv_is_sg() consistently throughout
the code.
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-2-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Until now the vvfat volume label was hardcoded to be
"QEMU VVFAT", now you can pass a file.label=labelname option
to the -drive to change it.
The FAT structure defines the volume label to be limited to
11 bytes and is filled up spaces when shorter than that. The
trailing spaces however aren't exposed to the user by
operating systems.
[Added missing comment '#' characters in block-core.json to fix build
errors.
--Stefan]
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-id: 1434706529-13895-2-git-send-email-w.bumiller@proxmox.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This patch introduces the blk_drain() function which allows to replace
blk_drain_all() when only one BlockDriverState needs to be drained.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1434537440-28236-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Calling throttle_group_config() cancels all timers from a particular
BlockDriverState, so any_timer_armed[] should be updated accordingly.
However, with the current code it may happen that a timer is armed in
a different BlockDriverState from the same group, so any_timer_armed[]
would be set to false in a situation where there is still a timer
armed.
The consequence is that we might end up with two timers armed. This
should not have any noticeable impact however, since all accesses to
the ThrottleGroup are protected by a lock, and the situation would
become normal again shortly thereafter as soon as all timers have been
fired.
The correct way to solve this is to check that we're actually
cancelling a timer before updating any_timer_armed[].
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1434382875-3998-1-git-send-email-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
After the commit 9b536adc ("block: acquire AioContext in
bdrv_drain_all()") the aio_poll() function got called for every
BlockDriverState, in assumption that every device may have its own
AioContext. If we have thousands of disks attached, there are a lot of
BlockDriverStates but only a few AioContexts, leading to tons of
unnecessary aio_poll() calls.
This patch changes the bdrv_drain_all() function allowing it find shared
AioContexts and to call aio_poll() only for unique ones.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1433936297-7098-4-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Remove it except for two things in qerror.h:
* Two #include to be cleaned up separately to avoid cluttering this
patch.
* The QERR_ macros. Mark as obsolete.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
We require a C99 compiler, so let's use 'bool' instead of 'int'
when dealing with boolean values. There are few enough clients
to fix them all in one pass.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Block layer core and image format patches
# gpg: Signature made Fri Jun 12 16:08:53 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (25 commits)
block: Fix reopen flag inheritance
block: Add BlockDriverState.inherits_from
block: Add list of children to BlockDriverState
queue.h: Add QLIST_FIX_HEAD_PTR()
block: Drain requests before swapping nodes in bdrv_swap()
block: Move flag inheritance to bdrv_open_inherit()
block: Use QemuOpts in bdrv_open_common()
block: Use macro for cache option names
vmdk: Use bdrv_open_image()
quorum: Use bdrv_open_image()
check-qdict: Test cases for new functions
qdict: Add qdict_{set,copy}_default()
qdict: Add qdict_array_entries()
iotests: Add tests for overriding BDRV_O_PROTOCOL
block: driver should override flags in bdrv_open()
block: Change bitmap truncate conditional to assertion
block: record new size in bdrv_dirty_bitmap_truncate
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
vmdk: Use vmdk_find_index_in_cluster everywhere
vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_status
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When reopening an image, the block layer already takes care to reopen
bs->file as well with recalculated inherited flags. The same must happen
for any other child (most notably missing before this patch: backing
files).
If bs->file (or any other child) didn't originally inherit from bs, e.g.
because it was created separately and then only referenced, it must not
inherit flags on reopen either, so check the inherited_from field before
propagation the reopen down.
VMDK already reopened its extents manually; this code can now be
dropped.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
