| Age | Commit message (Collapse) | Author |
|---|
|
The commit 533ffb17a that removed qed_aiocb_info.cancel said to remove
this but didn't do it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This sequence works efficiently if FALLOC_FL_ZERO_RANGE is not supported.
Unfortunately, FALLOC_FL_ZERO_RANGE is supported on really modern systems
and only for a couple of filesystems. FALLOC_FL_PUNCH_HOLE is much more
mature.
The sequence of 2 operations FALLOC_FL_PUNCH_HOLE and 0 is necessary due
to the following reasons:
- FALLOC_FL_PUNCH_HOLE creates a hole in the file, the file becomes
sparse. In order to retain original functionality we must allocate
disk space afterwards. This is done using fallocate(0) call
- fallocate(0) without preceeding FALLOC_FL_PUNCH_HOLE will do nothing
if called above already allocated areas of the file, i.e. the content
will not be zeroed
This should increase the performance a bit for not-so-modern kernels.
CC: Max Reitz <mreitz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There is a possibility that we are extending our image and thus writing
zeroes beyond the end of the file. In this case we do not need to care
about the hole to make sure that there is no data in the file under
this offset (pre-condition to fallocate(0) to work). We could simply call
fallocate(0).
This improves the performance of writing zeroes even on really old
platforms which do not have even FALLOC_FL_PUNCH_HOLE.
Before the patch do_fallocate was used when either
CONFIG_FALLOCATE_PUNCH_HOLE or CONFIG_FALLOCATE_ZERO_RANGE are defined.
Now the story is different. CONFIG_FALLOCATE is defined when Linux
fallocate is defined, posix_fallocate is completely different story
(CONFIG_POSIX_FALLOCATE). CONFIG_FALLOCATE is mandatory prerequite
for both CONFIG_FALLOCATE_PUNCH_HOLE and CONFIG_FALLOCATE_ZERO_RANGE
thus we are on the safe side.
CC: Max Reitz <mreitz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This efficiently writes zeroes on Linux if the kernel is capable enough.
FALLOC_FL_ZERO_RANGE correctly handles all cases, including and not
including file expansion.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
move code dealing with a block device to a separate function. This will
allow to implement additional processing for ordinary files.
Please note, that xfs_code has been moved before checking for
s->has_write_zeroes as xfs_write_zeroes does not touch this flag inside.
This makes code a bit more consistent.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The pattern
do {
if (fallocate(s->fd, mode, offset, len) == 0) {
return 0;
}
} while (errno == EINTR);
ret = translate_err(-errno);
will be commonly useful in next patches. Create helper for it.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
actually the code
if (ret == -ENODEV || ret == -ENOSYS || ret == -EOPNOTSUPP ||
ret == -ENOTTY) {
ret = -ENOTSUP;
}
is present twice and will be added a couple more times. Create helper
for this.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The v1.0.0 spec calls out PAYLOAD_BLOCK_ZERO FileOffsetMB field as being
'reserved'. In practice, this means that Hyper-V will fail to read a
disk image with PAYLOAD_BLOCK_ZERO block states with a FileOffsetMB
value other than 0.
The other states that indicate a block that is not there
(PAYLOAD_BLOCK_UNDEFINED, PAYLOAD_BLOCK_NOT_PRESENT,
PAYLOAD_BLOCK_UNMAPPED) have multiple options for what FileOffsetMB may
be set to, and '0' is explicitly called out as an option.
For all the above states, we will also just set the FileOffsetMB value
to 0.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: a9fe92f53f07e6ab1693811e4312c0d1e958500b.1421787566.git.jcody@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The string field entries 'filename', 'backing_file', and
'exact_filename' in the BlockDriverState struct are defined as 1024
bytes.
However, many places that use these values accept a maximum of PATH_MAX
bytes, so we have a mixture of 1024 byte and PATH_MAX byte allocations.
This patch makes the BlockDriverStruct field string sizes match usage.
This patch also does a few fixes related to the size that needs to
happen now:
* the block qapi driver is updated to use PATH_MAX bytes
* the qcow and qcow2 drivers have an additional safety check
* the block vvfat driver is updated to use PATH_MAX bytes
for the size of backing_file, for systems where PATH_MAX is < 1024
bytes.
* qemu-img uses PATH_MAX rather than 1024. These instances were not
changed to be dynamically allocated, however, as the extra
temporary 3K in stack usage for qemu-img does not seem worrisome.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The backing_filename string in mirror_run() is only used to check
for a NULL string, so we don't need to allocate 1024 bytes (or, later,
PATH_MAX bytes), when we only need to copy the first 2 characters.
We technically only need 1 byte, as we are just checking for NULL, but
since backing_filename[] is populated by bdrv_get_backing_filename(), a
string size of 1 will always only return '\0';
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Rather than declaring 'backing_filename2' on the stack in
bdrv_query_image_info(), dynamically allocate it on the heap.
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Functions 'vmdk_parse_extents' and 'vmdk_create' allocate several
PATH_MAX sized arrays on the stack. Make these dynamically allocated.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Keep the variable 'ret' something that is returned by the function it is
defined in. For the return value of 'sscanf', use a more meaningful
variable name.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds checks for unaligned L2 table offsets and unaligned data
cluster offsets (actually the preallocated offsets for zero clusters) to
the zero cluster expansion function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is not needed anymore. The new TLS-based algorithm is adaptive.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-7-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Similar to drive-backup, but this command uses a device id as target
instead of creating/opening an image file.
Also add blocker on target bs, since the target is also a named device
now.
Add check and report error for bs == target which became possible but is
an illegal case with introduction of blockdev-backup.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418899027-8445-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Mirror and migration use dirty bitmaps for their purposes, and since
commit [block: per caller dirty bitmap] they use their own bitmaps, not
the global one. But they use old functions bdrv_set_dirty and
bdrv_reset_dirty, which change all dirty bitmaps.
Named dirty bitmaps series by Fam and Snow are affected: mirroring and
migration will spoil all (not related to this mirroring or migration)
named dirty bitmaps.
This patch fixes this by adding bdrv_set_dirty_bitmap and
bdrv_reset_dirty_bitmap, which change concrete bitmap. Also, to prevent
such mistakes in future, old functions bdrv_(set,reset)_dirty are made
static, for internal block usage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
CC: John Snow <jsnow@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417081246-3593-1-git-send-email-vsementsov@parallels.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
When a vmdk image is created with a backing file, it is opened to check
whether it is indeed a vmdk file by letting qemu probe it. When doing
so, the backing filename is relative to the image's base directory so it
should be interpreted accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When using a relative backing file name, qemu needs to know the
directory of the top image file. For JSON filenames, such a directory
cannot be easily determined (e.g. how do you determine the directory of
a qcow2 BDS directly on top of a quorum BDS?). Therefore, do not allow
relative filenames for the backing file of BDSs only having a JSON
filename.
Furthermore, BDS::exact_filename should be used whenever possible. If
BDS::filename is not equal to BDS::exact_filename, the former will
always be a JSON object.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
'ret' was never initialized in the success path.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no need to do another O(n) pass on the list; the iocb to
split the list at is already available through the array we passed to
io_submit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1418305950-30924-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
These are unused.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1418305950-30924-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
It does not identify an index in an array anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1418305950-30924-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Avoid that unplug submits requests when io_submit reported that it
couldn't accept more; at the same time, try more io_submit calls if it
could handle the whole set of requests that were passed, so that the
"blocked" flag is reset as soon as possible.
After the previous patch, laio_submit already tried to avoid submitting
requests to a blocked queue, by comparing s->io_q.idx with "==" instead
of the more natural ">=". Switch to the simpler expression now that we
have the "blocked" flag.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1418305950-30924-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Keep a queue of requests that were not submitted; pass them to
the kernel when a completion is reported, unless the queue is
plugged.
The array of iocbs is rebuilt every time from scratch. This
avoids keeping the iocbs array and list synchronized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1418305950-30924-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Now that new VHDX images will default to BAT block states of
PAYLOAD_BLOCK_ZERO, we can indicate that VHDX has zero init.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 5e582703e36450b9ca939e2e5c9fa3930030f7fe.1418018421.git.jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The VHDX spec specifies that the default new block state is
PAYLOAD_BLOCK_NOT_PRESENT for a dynamic VHDX image, and
PAYLOAD_BLOCK_FULLY_PRESENT for a fixed VHDX image.
However, in order to create space-efficient VHDX images with qemu-img
convert, it is desirable to be able to set has_zero_init to true for
VHDX.
There is currently an option when creating VHDX images, to use block
state ZERO for new blocks. However, this currently defaults to 'off'.
In order to be able to eventually set has_zero_init to true for VHDX,
this needs to default to 'on'.
This patch changes the default to 'on', and provides some help
information to warn against setting it to 'off' when using qemu-img
convert.
[Max Reitz pointed out that a full stop was missing at the end of the
VHDX_BLOCK_OPT_ZERO option help text. I have added it.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 85164899eacc86e150c3ceba793cf93b398dedd7.1418018421.git.jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The 0.95 VHDX spec defined PAYLOAD_BLOCK_UNMAPPED to be 5. The 1.00
VHDX spec redefines PAYLOAD_BLOCK_UNMAPPED to be 3 instead.
The original value of 5 is now an undefined state in the spec, but it
should be safe to treat it the same and return zeros for data read.
This way, we can maintain compatibility with any images out in the wild
that may have been created in accordance to the 0.95 spec.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 8a4d2da73a8dbc04cde62bea782fc09ff84b1cf1.1418018421.git.jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Minor cleanup.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: e8718ae3fd3e40a527e46a00e394973fbaab4d53.1418018421.git.jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Variable local_err going out of scope
leaks the storage it points to.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1417674851-6248-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
If vmdk blindly tries to use path_combine() using bs->file->filename as
the base file name, this will result in a bad error message for JSON
file names when calling bdrv_open(). It is better to only try
bs->file->exact_filename; if that is empty, bs->file->filename will be
useless for path_combine() and an error should be emitted (containing
bs->file->filename because desc_file_path (which is
bs->file->exact_filename) is empty).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417615043-26174-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-7-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
It will be assigned to the return value of vmdk_read_desc.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-6-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since a too small file cannot be a valid VMDK image, and also since the
buffer's first 4 bytes will be unconditionally examined by
vmdk_open_sparse, let's error out the small file case to be clear.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Message-id: 1417649314-13704-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Zeroing a buffer that will be filled right after is not necessary, and
allocating a power of two + 1 is naughty.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-4-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
commit 04d542c8b (vmdk: support vmfs files) added support of VMFS extent
type but the comment above the changed code is left out. Update the
comment so they are consistent.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Message-id: 1417649314-13704-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This replaces two "time(NULL)" invocations with "g_random_int()".
According to VMDK spec, CID "is a random 32‐bit value updated the first
time the content of the virtual disk is modified after the virtual disk
is opened". Using "seconds since epoch" is just a "lame way" to generate
it, and not completely safe because of the low precision.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-2-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In commit fef6070, the need for NOCOW was removed from the vpc driver,
as we removed the the posix calls. However, the BLOCK_OPT_NOCOW was not
removed from vpc_create_opts. This was a mistake - remove the opt from
there as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 8ba076fa725fed681cde7d8afc4fb239ae06a9c6.1417620301.git.jcody@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In commit 7074786, the need for NOCOW was removed from the vdi driver,
as we removed the the posix calls. However, the BLOCK_OPT_NOCOW was not
removed from vdi_create_opts. This was a mistake - remove the opt from
there as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: e189364de11929d8fa04722f5d845de0a9834d44.1417620301.git.jcody@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The return value must be negative on error; there is one place in
raw_open_common() where errp is set, but ret remains 0. Fix it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_truncate() may fail and qcow2_write_compressed() should return the
error code in that case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.
This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In qcow2_alloc_cluster_offset(), *num is limited to
INT_MAX >> BDRV_SECTOR_BITS by all callers. However, since remaining is
of type uint64_t, we might as well cast *num to that type before
performing the shift.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The nfs protocol driver is capable of creating images, but did not
specify any creation options. Fix it.
A way to test this issue is the following:
$ qemu-img create -f nfs nfs://127.0.0.1/foo.qcow2 64M
Without this patch, it segfaults. With this patch, it does not. However,
this is not something that should really work; qemu-img should check
whether the parameter for the -f option (and -O for convert) is indeed a
format, and error out if it is not. Therefore, I am not making it an
iotest.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Although virtually impossible right now, bdrv_find_format("qcow") may
fail. The vvfat block driver should heed that case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We can always assume raw, file and qcow2 being available; so do not use
bdrv_find_format() to locate their BlockDriver objects but statically
reference the respective objects.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use the external qemu-timer API instead.
No one else should be calling cpu_get_clock(), get_clock() and
get_clock_realtime() directly; they are internal functions and they
should be confined to qemu-timer.c and cpus.c (where the icount
implementation resides). All accesses should go through
qemu_clock_get_ns.
Cc: kwolf@redhat.com
Cc: stefanha@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1417010463-3527-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
After reading the extension header, offset is incremented, but not
checked against end_offset any more. This way an integer overflow could
happen when checking whether the extension end is within the allowed
range, effectively disabling the check.
This patch adds the missing check and a test case for it.
Cc: qemu-stable@nongnu.org
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
