aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)Author
2013-06-24vmdk: refuse to open higher version than supportedFam Zheng
Refuse to open higher version for safety. Although we try to be compatible with published VMDK spec, VMware has newer version from ESXi 5.1 exported OVF/OVA, which we have no knowledge what's changed in it. And it is very likely to have more new versions in the future, so it's not safe to open them blindly. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-24qcow2: Batch discardsKevin Wolf
This optimises the discard operation for freed clusters by batching discard requests (both snapshot deletion and bdrv_discard end up updating the refcounts cluster by cluster). Note that we don't discard asynchronously, but keep s->lock held. This is to avoid that a freed cluster is reallocated and written to while the discard is still in flight. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-24qcow2: Options to enable discard for freed clustersKevin Wolf
Deleted snapshots are discarded in the image file by default, discard requests take their default from the -drive discard=... option and other places that free clusters must always be enabled explicitly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-24qcow2: Add refcount update reason to all callersKevin Wolf
This adds a refcount update reason to all callers of update_refcounts(), so that a follow-up patch can use this information to decide whether clusters that reach a refcount of 0 should be discarded in the image file. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-18Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
# By Paolo Bonzini (3) and others # Via Paolo Bonzini * bonzini/scsi-next: iscsi: reorganize iscsi_readcapacity_sync iscsi: simplify freeing of tasks vhost-scsi: fix k->set_guest_notifiers() NULL dereference scsi-disk: scsi-block device for scsi pass-through should not be removable scsi-generic: check the return value of bdrv_aio_ioctl in execute_command scsi-generic: fix sign extension of READ CAPACITY(10) data scsi: reset cdrom tray statuses on scsi_disk_reset Message-id: 1371565016-2643-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-18iscsi: reorganize iscsi_readcapacity_syncPaolo Bonzini
Avoid the goto, and use the same retry logic for the 10- and 16- byte versions. Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-18iscsi: simplify freeing of tasksPaolo Bonzini
Always free them in the iscsi_aio_*_acb functions and remove the checks in their callers. Remove ifs when the task struct was previously dereferenced (spotted by Coverity). Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-18nbd: strip braces from literal IPv6 address in URIJán Tomko
Otherwise they would get passed to getaddrinfo and fail with: address resolution failed for [::1]:1234: Name or service not known (Broken by commit v1.4.0-736-gf17c90b) Signed-off-by: Ján Tomko <jtomko@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-17Merge remote-tracking branch 'luiz/queue/qmp' into stagingAnthony Liguori
# By Luiz Capitulino # Via Luiz Capitulino * luiz/queue/qmp: qerror: drop QERR_OPEN_FILE_FAILED macro block: bdrv_reopen_prepare(): don't use QERR_OPEN_FILE_FAILED savevm: qmp_xen_save_devices_state(): use error_setg_file_open() dump: qmp_dump_guest_memory(): use error_setg_file_open() cpus: use error_setg_file_open() blockdev: use error_setg_file_open() block: mirror_complete(): use error_setg_file_open() rng-random: use error_setg_file_open() error: add error_setg_file_open() helper Message-id: 1371484631-29510-1-git-send-email-lcapitulino@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-17vmdk: Allow reading variable size descriptor filesEvgeny Budilovsky
the hard-coded 2k buffer on the stack won't allow reading big descriptor files which can be generated when storing big images. For example 500G vmdk splitted to 2G chunks. Signed-off-by: Evgeny Budilovsky <evgeny.budilovsky@ravellosystems.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17curl: Don't set curl options on the handle just before it's going to be deleted.Richard W.M. Jones
(Found by Kamil Dudka) Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17vmdk: byteswap VMDK4Header.desc_offset fieldStefan Hajnoczi
Remember to byteswap VMDK4Header.desc_offset on big-endian machines. Cc: qemu-stable@nongnu.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17block/curl.c: Refuse to open the handle for writes.Richard W.M. Jones
Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17sheepdog: support 'qemu-img snapshot -a'Liu Yuan
Just call sd_create_branch() in the snapshot_goto to rollback the image is good enough. With this patch, 'loadvm' process for sheepdog is modified: Suppose we have a snapshot chain A --> B --> C, we do 'loadvm A' so as to get a new chain, A --> B | V C1 in the old code: 1 reload inode of A (in snapshot_goto) 2 read vmstate via A's vdi_id (loadvm_state) 3 delete C and create C1, reload inode of C1 (sd_create_branch on write) with this patch applied: 1 reload inode of A, delete C and create C1 (in snapshot_goto) 2 read vmstate via C1's parent, that is A's vdi_id (loadvm_state) This will fix the possible bug that QEMU exit between 2 and 3 in the old code Cc: qemu-devel@nongnu.org Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17sheepdog: fix snapshot tag initializationLiu Yuan
This is an old and obvious bug. We should pass snapshot_id to the tag. Or simple command like 'qemu-img snapshot -a tag sheepdog:image' will fail Cc: qemu-devel@nongnu.org Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17block: mirror_complete(): use error_setg_file_open()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2013-06-11curl: Whitespace only changes.Richard W.M. Jones
Trivial patch to remove odd whitespace. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-07qmp: add ImageInfo in BlockDeviceInfo used by query-blockWenchao Xia
Now image info will be retrieved as an embbed json object inside BlockDeviceInfo, backing chain info and all related internal snapshot info can be got in the enhanced recursive structure of ImageInfo. New recursive member *backing-image is added to reflect the backing chain status. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07block: add image info query function bdrv_query_image_info()Wenchao Xia
This patch adds function bdrv_query_image_info(), which will retrieve image info in qmp object format. The implementation is based on the code moved from qemu-img.c, but uses block layer function to get snapshot info. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07block: add snapshot info query function bdrv_query_snapshot_info_list()Wenchao Xia
This patch adds function bdrv_query_snapshot_info_list(), which will retrieve snapshot info of an image in qmp object format. The implementation is based on the code moved from qemu-img.c with modification to fit more for qmp based block layer API. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK eventsKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-04block: dump snapshot and image info to specified outputWenchao Xia
bdrv_snapshot_dump() and bdrv_image_info_dump() do not dump to a buffer now, some internal buffers are still used for format control, which have no chance to be truncated. As a result, these two functions have no more issue of truncation, and they can be used by both qemu and qemu-img with correct parameter specified. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: move qmp and info dump related code to block/qapi.cWenchao Xia
This patch is a pure code move patch, except following modification: 1 get_human_readable_size() is changed to static function. 2 dump_human_image_info() is renamed to bdrv_image_info_dump(). 3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs) instead of direct traverse of global array 'bdrv_states'. 4 collect_snapshots() and collect_image_info() are renamed, unused parameter *fmt in collect_image_info() is removed. 5 code style fix. To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H instead of QAPI_H. Now block.h and snapshot.h are at the same level in include path, block_int.h and qapi.h will both include them. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: move snapshot code in block.c to block/snapshot.cWenchao Xia
All snapshot related code, except bdrv_snapshot_dump() and bdrv_is_snapshot(), is moved to block/snapshot.c. bdrv_snapshot_dump() will be moved to another file later. bdrv_is_snapshot() is not related with internal snapshot. It also fixes small code style errors reported by check script. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-18Remove twice include of qemu-common.hQiao Nuohan
This patch is used to remove twice include of "qemu-common.h" in block/win32-aio.c Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-14qcow2: Catch some L1 table index overflowsKevin Wolf
This catches the situation that is described in the bug report at https://bugs.launchpad.net/qemu/+bug/865518 and goes like this: $ qemu-img create -f qcow2 huge.qcow2 $((1024*1024))T Formatting 'huge.qcow2', fmt=qcow2 size=1152921504606846976 encryption=off cluster_size=65536 lazy_refcounts=off $ qemu-io /tmp/huge.qcow2 -c "write $((1024*1024*1024*1024*1024*1024 - 1024)) 512" Segmentation fault With this patch applied the segfault will be avoided, however the case will still fail, though gracefully: $ qemu-img create -f qcow2 /tmp/huge.qcow2 $((1024*1024))T Formatting 'huge.qcow2', fmt=qcow2 size=1152921504606846976 encryption=off cluster_size=65536 lazy_refcounts=off qemu-img: The image size is too large for file format 'qcow2' Note that even long before these overflow checks kick in, you get insanely high memory usage (up to INT_MAX * sizeof(uint64_t) = 16 GB for the L1 table), so with somewhat smaller image sizes you'll probably see qemu aborting for a failed g_malloc(). If you need huge image sizes, you should increase the cluster size to the maximum of 2 MB in order to get higher limits. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-12remove double semicolonsDong Xu Wang
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-03vmdk: add bdrv_co_write_zeroesFam Zheng
Use special offset to write zeroes efficiently, when zeroed-grain GTE is available. If zero-write an allocated cluster, cluster is leaked because its offset pointer is overwritten by "0x1". Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03vmdk: store fields of VmdkMetaData in cpu endianFam Zheng
Previously VmdkMetaData.offset is stored little endian while other fields are cpu endian. This changes offset to cpu endian and convert before writing to image. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03vmdk: change magic number to macroFam Zheng
Two hard coded flag bits are changed to macros. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03vmdk: Add option to create zeroed-grain imageFam Zheng
Add image create option "zeroed-grain" to enable zeroed-grain GTE feature of vmdk sparse extents. When this option is on, header version of newly created extent will be 2 and VMDK4_FLAG_ZERO_GRAIN flag bit will be set. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03vmdk: add support for “zeroed‐grain” GTEFam Zheng
Introduced support for zeroed-grain GTE, as specified in Virtual Disk Format 5.0[1]. Recent VMware hosted platform products support a new “zeroed‐grain” grain table entry (GTE). The zeroed‐grain GTE returns all zeros on read. In other words, the zeroed‐grain GTE indicates that a grain in the child disk is zero‐filled but does not actually occupy space in storage. A sparse extent with zeroed‐grain GTE has the following in its header: * SparseExtentHeader.version = 2 * SparseExtentHeader.flags has bit 2 set Other than the new flag and the possibly zeroed‐grain GTE, version 2 sparse extents are identical to version 1. Also, a zeroed‐grain GTE has value 0x1 in the GT table. [1] Virtual Disk Format 5.0, http://www.vmware.com/support/developer/vddk/vmdk_50_technote.pdf?src=vmdk Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03vmdk: named return code.Fam Zheng
Internal routines in vmdk.c previously return -1 on error and 0 on success. More return values are useful for future changes such as zeroed-grain GTE. Change all the magic `return 0` and `return -1` to macro names: * VMDK_OK 0 * VMDK_ERROR (-1) * VMDK_UNALLOC (-2) * VMDK_ZEROED (-3) Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03block: add read-only support to VHDX image format.Jeff Cody
This adds in read-only support to the VHDX image format. This supports reads for fixed-size, and dynamic sized VHDX images. Differencing files are still unsupported. The image must be opened without BDRV_O_RDWR set, because we do not yet update the headers. I.e., pass 'readonly=on' in the drive image options from the QEMU commandline. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03block: initial VHDX driver support framework - supports open and probeJeff Cody
This is the initial block driver framework for VHDX image support (i.e. Hyper-V image file formats), that supports opening VHDX files, and parsing the headers. This commit does not yet enable: - reading - writing - updating the header - differencing files (images with parents) - log replay / dirty logs (only clean images) This is based on Microsoft's VHDX specification: "VHDX Format Specification v0.95", published 4/12/2012 https://www.microsoft.com/en-us/download/details.aspx?id=29681 Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03block: vhdx header for the QEMU support of VHDX imagesJeff Cody
This is based on Microsoft's VHDX specification: "VHDX Format Specification v0.95", published 4/12/2012 https://www.microsoft.com/en-us/download/details.aspx?id=29681 These structures define the various header, metadata, and other block structures defined in the VHDX specification. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: fix loadvm operationLiu Yuan
Currently the 'loadvm' opertaion works as following: 1. switch to the snapshot 2. mark current working VDI as a snapshot 3. rely on sd_create_branch to create a new working VDI based on the snapshot This works not the same as other format as QCOW2. For e.g, qemu > savevm # get a live snapshot snap1 qemu > savevm # snap2 qemu > loadvm 1 # This will steally create snap3 of the working VDI Which will result in following snapshot chain: base <-- snap1 <-- snap2 <-- snap3 ^ | working VDI snap3 was unnecessarily created and might be annoying users. This patch discard the unnecessary 'snap3' creation. and implement rollback(loadvm) operation to the specified snapshot by 1. switch to the snapshot 2. delete working VDI 3. rely on sd_create_branch to create a new working VDI based on the snapshot The snapshot chain for above example will be: base <-- snap1 <-- snap2 ^ | working VDI Cc: qemu-devel@nongnu.org Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: resend write requests when SD_RES_READONLY is receivedMORITA Kazutaka
When a snapshot is taken from out side of qemu (e.g. qemu-img snapshot), write requests to the current vdi return SD_RES_READONLY. In this case, the sheepdog block driver needs to update the current inode to the latest one and resend the write requests. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: add helper function to reload inodeMORITA Kazutaka
This adds a helper function to update the current inode state with the specified vdi object. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: add SD_RES_READONLY result codeMORITA Kazutaka
Sheepdog returns SD_RES_READONLY when qemu sends write requests to the snapshot vdi. This adds the result code and makes sd_strerror() print its error reason. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: cleanup find_vdi_nameMORITA Kazutaka
This makes 'filename' and 'tag' constant variables, and renames 'for_snapshot' to 'lock' to clear how it works. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26rbd: Fix use after free in rbd_open()Kevin Wolf
Commit a9ccedc3 frees the QemuOpts for the driver-specific options immediately, even though it still needs the filename string that is contained there. This doesn't work. Move the deletion of the QemuOpts to the end of the function where its content isn't needed any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: implement .bdrv_co_is_allocated()Liu Yuan
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: use BDRV_SECTOR_SIZELiu Yuan
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: add discard/trim support for sheepdogLiu Yuan
The 'TRIM' command from VM that is to release underlying data storage for better thin-provision is already supported by the Sheepdog. This patch adds the TRIM support at QEMU part. For older Sheepdog that doesn't support it, we return 0(success) to upper layer. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-22Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Kevin Wolf (16) and Stefan Hajnoczi (4) # Via Kevin Wolf * kwolf/for-anthony: qemu-iotests: add 053 unaligned compressed image size test block: Allow overriding backing.file.filename block: Remove filename parameter from .bdrv_file_open() vvfat: Use bdrv_open options instead of filename sheepdog: Use bdrv_open options instead of filename rbd: Use bdrv_open options instead of filename iscsi: Use bdrv_open options instead of filename gluster: Use bdrv_open options instead of filename curl: Use bdrv_open options instead of filename blkverify: Use bdrv_open options instead of filename blkdebug: Use bdrv_open options instead of filename raw-win32: Use bdrv_open options instead of filename raw-posix: Use bdrv_open options instead of filename block: Enable filename option block: Add driver-specific options for backing files block: Fail gracefully when using a format driver on protocol level qemu-iotests: Fix _filter_qemu qemu-img: do not zero-pad the compressed write buffer qcow: allow sub-cluster compressed write to last cluster qcow2: allow sub-cluster compressed write to last cluster Message-id: 1366630294-18984-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22Merge remote-tracking branch 'bonzini/nbd-next' into stagingAnthony Liguori
# By Stefan Hajnoczi # Via Paolo Bonzini * bonzini/nbd-next: nbd: set TCP_NODELAY nbd: use TCP_CORK in nbd_co_send_request() nbd: unlock mutex in nbd_co_send_request() error path Message-id: 1366381830-11267-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22block: Remove filename parameter from .bdrv_file_open()Kevin Wolf
It is unused now in all block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22vvfat: Use bdrv_open options instead of filenameKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22sheepdog: Use bdrv_open options instead of filenameKevin Wolf
This is only to convert the internal interface that is used for passing the "filename" to be parsed, but converting to actual fine grained options is left for another day, as it doesn't look trivial. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 06:35:01 +0000