| Age | Commit message (Collapse) | Author |
|---|
|
As mentioned in commit 0c1bd46, we ignored requests to
discard the trailing cluster of an unaligned image. While
discard is an advisory operation from the guest standpoint,
(and we are therefore free to ignore any request), our
qcow2 implementation exploits the fact that a discarded
cluster reads back as 0. As long as we discard on cluster
boundaries, we are fine; but that means we could observe
non-zero data leaked at the tail of an unaligned image.
Enhance iotest 66 to cover this case, and fix the implementation
to honor a discard request on the final partial cluster.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170407013709.18440-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Add missing error messages for the block driver implementations of
.bdrv_truncate(); drop the generic one from block.c's bdrv_truncate().
Since one of these changes touches a mis-indented block in
block/file-posix.c, this patch fixes that coding style issue along the
way.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-5-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This patch makes vhdx_create() always set errp in case of an error. It
also adds errp parameters to vhdx_create_bat() and
vhdx_create_new_region_table() so we can pass on the error object
generated by blk_truncate() as of a future commit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170328205129.15138-2-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
tail_padding_bytes is calculated wrong. F.e. for
offset = 0
bytes = 2048
align = 512
we will have tail_padding_bytes = 512 which is definitely wrong. The patch
fixes that arithmetics.
Fortunately this problem is harmless, we will have 1 extra allocation and
free thus there is no need to put this into stable. The problem is here
from the very beginning.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The block layer takes care of removing the bs->file child if the block
driver's bdrv_open()/bdrv_file_open() implementation fails. The block
driver therefore does not need to do so, and indeed should not unless it
sets bs->file to NULL afterwards -- because if this is not done, the
bdrv_unref_child() in bdrv_open_inherit() will dereference the freed
memory block at bs->file afterwards, which is not good.
We can now decide whether to add a "bs->file = NULL;" after each of the
offending bdrv_unref_child() invocations, or just drop them altogether.
The latter is simpler, so let's do that.
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Reported by Coverity. We already use bs in bdrv_inc_in_flight before
checking for NULL. It is unnecessary as all callers pass non-NULL bs, so
drop it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This reverts commit e3e0003a8f6570aba1421ef99a0b383a43371a74.
This commit was necessary for the 2.9 release because we were unable to
fix the underlying issue(s) in time. However, we will be for 2.10.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
blk_name() is not modifying data passed to it through pointer and it
returns also a pointer to const so the argument can be made const for
code safeness.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds support for reopen in rbd, for changing between r/w and r/o.
Note, that this is only a flag change, but we will block a change from
r/o to r/w if we are using an RBD internal snapshot.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: d4e87539167ec6527d44c97b164eabcccf96e4f3.1491597120.git.jcody@redhat.com
|
|
Update 'clientname' to be 'user', which tracks better with both
the QAPI and rados variable naming.
Update 'name' to be 'image_name', as it indicates the rbd image.
Naming it 'image' would have been ideal, but we are using that for
the rados_image_t value returned by rbd_open().
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: b7ec1fb2e1cf36f9b6911631447a5b0422590b7d.1491597120.git.jcody@redhat.com
|
|
A few block drivers will set the BDS read_only flag from their
.bdrv_open() function. This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().
This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.
This patch also changes the behavior of vvfat. Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.
For instance, this -drive parameter would result in a writable image:
"-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on"
This is not correct. Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
|
|
We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
|
|
Source code for the qnio library that this code loads can be downloaded from:
https://github.com/VeritasHyperScale/libqnio.git
Sample command line using JSON syntax:
./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0
-k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
-msg timestamp=on
'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410",
"server":{"host":"172.172.17.4","port":"9999"}}'
Sample command line using URI syntax:
qemu-img convert -f raw -O raw -n
/var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad
vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0
Sample command line using TLS credentials (run in secure mode):
./qemu-io --object
tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read
-v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999",
"vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}'
[Jeff: Modified trace-events with the correct string formatting]
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-10-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-9-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-8-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Move opaque to 2nd instead of the 2nd to last, so that compilers help
check with the conversion.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-7-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-3-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-2-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The recursive bdrv_drain_recurse may run a block job completion BH that
drops nodes. The coming changes will make that more likely and use-after-free
would happen without this patch
Stash the bs pointer and use bdrv_ref/bdrv_unref in addition to
QLIST_FOREACH_SAFE to prevent such a case from happening.
Since bdrv_unref accesses global state that is not protected by the AioContext
lock, we cannot use bdrv_ref/bdrv_unref unconditionally. Fortunately the
protection is not needed in IOThread because only main loop can modify a graph
with the AioContext lock held.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170418143044.12187-2-famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Tested-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
In case of block migration, there may be writes to BlockBackends that do
not have the write permission taken. Before this issue is fixed (which
is not going to happen in 2.9), we therefore cannot assert that this is
the case.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170411145050.31290-1-mreitz@redhat.com
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This fixes a regression introduced in commit 9d456654.
aio_co_wake() can only be used to reenter a coroutine that was already
previously entered, otherwise co->ctx is uninitialised and we access
garbage. Using it immediately after qemu_coroutine_create() like in
co_read_response() is wrong and causes segfaults.
Replace the call with aio_co_enter(), which gets an explicit AioContext
parameter and works even for new coroutines.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1491919733-21065-1-git-send-email-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Since d5895fcb (iscsi: Split URL into individual options), creating
qcow2 image on an iscsi LUN fails:
qemu-img create -f qcow2 iscsi://$SERVER/$IQN/0 1G
qemu-img: iscsi://$SERVER/$IQN/0: Could not create image: Invalid
argument
The problem is iscsi_open now expects that transport_name, portal and
target are already parsed into structured options by
iscsi_parse_filename, but it is not called in iscsi_create.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170410075451.21329-1-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Dropped now superfluous
qdict_put(bs_options, "filename", ...)]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
When a block device that is part of a throttle group is hot-unplugged,
we forgot to remove it from the throttle group. This leaves stale
memory around, and causes an easily reproducible crash:
$ ./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio \
-device virtio-scsi-pci,bus=pci.0 -drive \
id=drive_image2,if=none,format=raw,file=file2,bps=512000,iops=100,group=foo \
-device scsi-hd,id=image2,drive=drive_image2 -drive \
id=drive_image3,if=none,format=raw,file=file3,bps=512000,iops=100,group=foo \
-device scsi-hd,id=image3,drive=drive_image3
{'execute':'qmp_capabilities'}
{'execute':'device_del','arguments':{'id':'image3'}}
{'execute':'system_reset'}
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1428810
Suggested-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170406190847.29347-1-eblake@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
raw_open() expects the caller always passing in the right actual
@options parameter. But when trying to applying snapshot on a RBD
image, bdrv_snapshot_goto() calls raw_open() (by calling the
bdrv_open callback on the BlockDriver) with a NULL @options, and
that will result in a Segmentation fault.
For the other non-raw format drivers, it also makes sense to passing
in the actual options, althought they don't trigger the problem so
far.
Let's prepare a @options by adding the "file" key-value pair to a
copy of the actual options that were given for the node (i.e.
bs->options), and pass it to the callback.
BlockDriver.bdrv_open() expects bs->file to be NULL and just
overwrites it with the result from bdrv_open_child(). That means we
should actually make sure it's NULL because otherwise the child BDS
will have a reference count that is 1 too high. So we unconditionally
invoke bdrv_unref_child() before calling BlockDriver.bdrv_open(), and
we wrap everything in bdrv_ref()/bdrv_unref() so the BDS isn't
deleted in the meantime.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-id: 20170405091909.36357-2-bjsdjshi@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
When called from main thread, the coroutine should run in the context of
bs. Use bdrv_coroutine_enter to ensure that.
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
bdrv_inc_in_flight and bdrv_dec_in_flight are mandatory for
BDRV_POLL_WHILE to work, even for the shortcut case where flush is
unnecessary. Move the if block to below bdrv_dec_in_flight, and BTW fix
the variable declaration position.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
BDRV_POLL_WHILE waits for the started I/O by releasing bs's ctx then polling
the main context, which relies on the yielded coroutine continuing on bs->ctx
before notifying qemu_aio_context with bdrv_wakeup().
Thus, using qemu_coroutine_enter to start I/O is wrong because if the coroutine
is entered from main loop, co->ctx will be qemu_aio_context, as a result of the
"release, poll, acquire" loop of BDRV_POLL_WHILE, race conditions happen when
both main thread and the iothread access the same BDS:
main loop iothread
-----------------------------------------------------------------------
blockdev_snapshot
aio_context_acquire(bs->ctx)
virtio_scsi_data_plane_handle_cmd
bdrv_drained_begin(bs->ctx)
bdrv_flush(bs)
bdrv_co_flush(bs) aio_context_acquire(bs->ctx).enter
...
qemu_coroutine_yield(co)
BDRV_POLL_WHILE()
aio_context_release(bs->ctx)
aio_context_acquire(bs->ctx).return
...
aio_co_wake(co)
aio_poll(qemu_aio_context) ...
co_schedule_bh_cb() ...
qemu_coroutine_enter(co) ...
/* (A) bdrv_co_flush(bs) /* (B) I/O on bs */
continues... */
aio_context_release(bs->ctx)
aio_context_acquire(bs->ctx)
Note that in above case, bdrv_drained_begin() doesn't do the "release,
poll, acquire" in BDRV_POLL_WHILE, because bs->in_flight == 0.
Fix this by using bdrv_coroutine_enter and enter coroutine in the right
context.
iotests 109 output is updated because the coroutine reenter flow during
mirror job complete is different (now through co_queue_wakeup, instead
of the unconditional qemu_coroutine_switch before), making the end job
len different.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
|
|
It should be moved to the same context as source, before inserting to the
graph.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The assertion is currently failing. We can't require callers to have
write permissions when all they are doing is a read, so comment it out.
Add a FIXME comment in the code so that the check is re-enabled when
copy on read is refactored into its own filter driver.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
|
|
If @bs does not have any parents, the only reference to @mirror_top_bs
will be held by the BlockJob object after the bdrv_unref() following
block_job_create(). However, if block_job_create() fails, this reference
will not exist and @mirror_top_bs will have been deleted when we
goto fail.
The issue comes back at all later entries to the fail label: We delete
the BlockJob object before rolling back our changes to the node graph.
This means that we will delete @mirror_top_bs in the process.
All in all, whenever @bs does not have any parents and we go down the
fail path we will dereference @mirror_top_bs after it has been deleted.
Fix this by invoking bdrv_unref() only when block_job_create() was
successful and by bdrv_ref()'ing @mirror_top_bs in the fail path before
deleting the BlockJob object. Finally, bdrv_unref() it at the end of the
fail path after we actually no longer need it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Like in the mirror filter driver, we also need to set the image size for
the commit filter driver. This is less likely to be a problem in
practice than for the mirror because we're not at the active layer here,
but attaching new parents to a node in the middle of the chain is
possible, so the size needs to be correct anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
|
|
The filter driver that is inserted by the commit job needs to use the
same AioContext as its parent and child nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
|
|
Usually guest devices don't like other writers to the same image, so
they use blk_set_perm() to prevent this from happening. In the migration
phase before the VM is actually running, though, they don't have a
problem with writes to the image. On the other hand, storage migration
needs to be able to write to the image in this phase, so the restrictive
blk_set_perm() call of qdev devices breaks it.
This patch flags all BlockBackends with a qdev device as
blk->disable_perm during incoming migration, which means that the
requested permissions are stored in the BlockBackend, but not actually
applied to its root node yet.
Once migration has finished and the VM should be resumed, the
permissions are applied. If they cannot be applied (e.g. because the NBD
server used for block migration hasn't been shut down), resuming the VM
fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
|
|
* MemoryRegionCache revert
* glib optimization workaround
* fix "info lapic" segfault on isapc
* fix QIOChannel memory leak
# gpg: Signature made Mon 03 Apr 2017 18:17:00 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
main-loop: Acquire main_context lock around os_host_main_loop_wait.
exec: revert MemoryRegionCache
nbd: fix memory leak on socket_connect failed
ipmi: Fix macro issues
target-i386: fix "info lapic" segfault on isapc
iscsi: drop unused IscsiAIOCB.qiov field
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Change the types of variables in allocate_clusters() to int64_t so we do
not have to worry about potential overflows.
Add an assertion that our accesses to s->bat[] do not result in a buffer
overflow and that the implicit conversion performed when invoking
bat_entry_off() does not result in an integer overflow.
Coverity-id: 1307776
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170331170512.10381-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
There is a subtle difference between the fast (qcow2v3 with no
extra data) and slow path (qcow2v2 format [aka 0.10], or when a
snapshot is present) of qcow2_make_empty(). The slow path fails
to discard the final (partial) cluster of an unaligned image.
The problem stems from the fact that qcow2_discard_clusters() was
silently ignoring sub-cluster head and tail on unaligned requests.
A quick audit of all callers shows that qcow2_snapshot_create() has
always passed a cluster-aligned request since the call was added
in commit 1ebf561; qcow2_co_pdiscard() has passed a cluster-aligned
request since commit ecdbead taught the block layer about preferred
discard alignment; and qcow2_make_empty() was fixed to pass an
aligned start (but not necessarily end) in commit a3e1505.
Asserting that the start is always aligned also points out that we
now have a dead check: rounding the end offset down can never result
in a value less than the aligned start offset (the check was rendered
dead with commit ecdbead). Meanwhile, we do not want to round the
end cluster down in the one case of the end offset matching the
(unaligned) file size - that final partial cluster should still be
discarded.
With those fixes in place, the fast and slow paths are back in sync
at discarding an entire image; the next patch will update
qemu-iotests to ensure we don't regress.
Note that bdrv_co_pdiscard ignores ALL partial cluster requests,
including the partial cluster at the end of an image; it can be
argued that the partial cluster at the end should be special-cased
so that a guest issuing discard requests at proper alignments
everywhere else can likewise empty the entire image. But that
optimization is left for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331185356.2479-3-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Commit 831acdc "sheepdog: Implement bdrv_parse_filename()" and commit
d282f34 "sheepdog: Support blockdev-add" have different ideas on how
the QemuOpts parameters for the server address are named. Fix that.
While there, rename BlockdevOptionsSheepdog member addr to server, for
consistency with BlockdevOptionsSsh, BlockdevOptionsGluster,
BlockdevOptionsNbd.
Commit 831acdc's example becomes
--drive driver=sheepdog,server.type=inet,server.host=fido,server.port=7000,vdi=dolly
instead of
--drive driver=sheepdog,host=fido,vdi=dolly
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-id: 1490895797-29094-10-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
SocketAddress is a simple union, and simple unions are awkward: they
have their variant members wrapped in a "data" object on the wire, and
require additional indirections in C. I intend to limit its use to
existing external interfaces, and convert all internal interfaces to
SocketAddressFlat.
BlockdevOptionsNbd is an external interface using SocketAddress. We
already use SocketAddressFlat elsewhere in blockdev-add. Replace it
by SocketAddressFlat while we can (it's new in 2.9) for simplicity and
consistency. For example,
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"data": { "host": "localhost",
"port": "12345" } } } }
becomes
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"host": "localhost", "port": "12345" } } }
Since the internal interfaces still take SocketAddress, this requires
conversion function socket_address_crumple(). It'll go away when I
update the interfaces.
Unfortunately, SocketAddress is also visible in -drive since 2.8:
-drive if=none,driver=nbd,server.type=inet,server.data.host=127.0.0.1,server.data.port=12345
Nobody should be using it, as it's fairly new and has never been
documented, so adding still more compatibility gunk to keep it working
isn't worth the trouble. You now have to use
-drive if=none,driver=nbd,server.type=inet,server.host=127.0.0.1,server.port=12345
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-9-git-send-email-armbru@redhat.com
[mreitz: Change iotest 147 accordingly]
Because of this interface change, iotest 147 has to be adapted.
Unfortunately, we cannot just flatten all of the addresses because
nbd-server-start still takes a plain SocketAddress. Therefore, we need
both and this is most easily achieved by writing the SocketAddress into
the code and flattening it where necessary.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170330221243.17333-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Note that the new variants are impossible in qemu_gluster_glfs_init(),
because the gconf->server can only come from qemu_gluster_parse_uri()
or qemu_gluster_parse_json(), and neither can create anything but
'inet' or 'unix'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-7-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
qemu_gluster_glfs_init() and qemu_gluster_parse_json() rely on the
fact that SocketAddressFlatType has only two members
SOCKET_ADDRESS_FLAT_TYPE_INET and SOCKET_ADDRESS_FLAT_TYPE_UNIX.
Correct, but won't stay correct. Make them more robust.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490895797-29094-6-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
-blockdev and blockdev_add convert their arguments via QObject to
BlockdevOptions for qmp_blockdev_add(), which converts them back to
QObject, then to a flattened QDict. The QDict's members are typed
according to the QAPI schema.
-drive converts its argument via QemuOpts to a (flat) QDict. This
QDict's members are all QString.
Thus, the QType of a flat QDict member depends on whether it comes
from -drive or -blockdev/blockdev_add, except when the QAPI type maps
to QString, which is the case for 'str' and enumeration types.
The block layer core extracts generic configuration from the flat
QDict, and the block driver extracts driver-specific configuration.
Both commonly do so by converting (parts of) the flat QDict to
QemuOpts, which turns all values into strings. Not exactly elegant,
but correct.
However, A few places access the flat QDict directly:
* Most of them access members that are always QString. Correct.
* bdrv_open_inherit() accesses a boolean, carefully. Correct.
* nfs_config() uses a QObject input visitor. Correct only because the
visited type contains nothing but QStrings.
* nbd_config() and ssh_config() use a QObject input visitor, and the
visited types contain non-QStrings: InetSocketAddress members
@numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try
to use them (they're all optional). @to is ignored anyway.
Reproducer:
-drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p
-drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4
both fail with "Invalid parameter type for 'data.ipv4', expected: boolean"
Add suitable comments to all these places. Mark the buggy ones FIXME.
"Fortunately", -drive's driver-specific options are entirely
undocumented.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com
[mreitz: Fixed two typos]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
When TCP connection fails between nbd server and client,
the local var, sioc, memory leak.
This patch fixes the memory leak.
Signed-off-by: yaolujing <yaolujing@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1491005709-29989-1-git-send-email-yaolujing@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The IscsiAIOCB.qiov field has been unused since commit
063c3378a9e3c25cc0afac3c72e4823d0621e352 ("block/iscsi: introduce
bdrv_co_{readv, writev, flush_to_disk}") back in 2013.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170327165005.22038-1-stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
