| Age | Commit message (Collapse) | Author |
|---|
|
Assuming that any image on a block device is not properly zero-initialized is
actually wrong: Only raw images have this problem. Any other image format
shouldn't care about it, they initialize everything properly themselves.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There is no need to have a second set of integral types.
Replace them by the standard types from stdint.h.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
CVE-2008-2004 described a vulnerability in QEMU whereas a malicious user could
trick the block probing code into accessing arbitrary files in a guest. To
mitigate this, we added an explicit format parameter to -drive which disabling
block probing.
Fast forward to today, and the vast majority of users do not use this parameter.
libvirt does not use this by default nor does virt-manager.
Most users want block probing so we should try to make it safer.
This patch adds some logic to the raw device which attempts to detect a write
operation to the beginning of a raw device. If the first 4 bytes happen to
match an image file that has a backing file that we support, it scrubs the
signature to all zeros. If a user specifies an explicit format parameter, this
behavior is disabled.
I contend that while a legitimate guest could write such a signature to the
header, we would behave incorrectly anyway upon the next invocation of QEMU.
This simply changes the incorrect behavior to not involve a security
vulnerability.
I've tested this pretty extensively both in the positive and negative case. I'm
not 100% confident in the block layer's ability to deal with zero sized writes
particularly with respect to the aio functions so some additional eyes would be
appreciated.
Even in the case of a single sector write, we have to make sure to invoked the
completion from a bottom half so just removing the zero sized write is not an
option.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
WIN32 is not only the system which doesn't have TCP_CORK (e.g. OS X).
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Sheepdog is a distributed storage system for QEMU. It provides highly
available block level storage volumes to VMs like Amazon EBS. This
patch adds a qemu block driver for Sheepdog.
Sheepdog features are:
- No node in the cluster is special (no metadata node, no control
node, etc)
- Linear scalability in performance and capacity
- No single point of failure
- Autonomous management (zero configuration)
- Useful volume management support such as snapshot and cloning
- Thin provisioning
- Autonomous load balancing
The more details are available at the project site:
http://www.osrg.net/sheepdog/
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
raw_pread_aligned() retries up to two times if the block device backs
a virtual CD-ROM (a drive with media=cdrom and if=ide, scsi, xen or
none). This makes no sense. Whether retrying reads can correct read
errors can only depend on what we're reading, not on how the result
gets used. We need to check what whether we're reading from a
physical CD-ROM or floppy here.
I doubt retrying is useful even then. Left for another day.
Impact:
* Virtual CD-ROM backed by host_cdrom behaves the same.
* Virtual CD-ROM backed by file or host_device no longer retries.
* A drive backed by host_cdrom now retries even if it's not a virtual
CD-ROM.
* Any drive backed by host_floppy now retries.
While there, clean up gratuitous use of goto.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This distinguishes between harmless leaks and real corruption. Hopefully users
better understand what qemu-img check wants to tell them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
state = 0 in rules means that the rule is valid for any state. Therefore it's
impossible to have a rule that works only in the initial state. This changes
the initial state from 0 to 1 to make this possible.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Forgetting to free them means that the next instance inherits all rules and
gets its own rules only additionally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The list head was initialized to point to the wrong list, so all actions ended
up being handled as inject-error even if they were set-state in fact.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
People were wondering why qemu-img check failed after they tried to preallocate
a large qcow2 file and ran out of disk space.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Trying to check them leads to a second error message which is more confusing
than helpful:
Can't get refcount for cluster 0: Invalid argument
ERROR cluster 0 refcount=-22 reference=1
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
With corrupted images, we can easily get an cluster index that exceeds the
array size of the temporary refcount table.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash.
While at it, correct the wrong usage of errno.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We don't have an equivalent to mmap in the qemu block API, so read and
write the bitmap directly. At least in the dumb implementation added
in this patch this is a lot less efficient, but it means cow can also
work on windows, and over nbd or curl. And it fixes qemu-iotests testcase
012 which did not work properly due to issues with read-only mmap access.
In addition we can also get rid of the now unused get_mmap_addr function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use pread/pwrite instead of lseek + read/write in preparation of using the
qemu block API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If writing the L1 table to disk failed, we need to restore its old content in
memory to avoid inconsistencies.
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This fixes load_refcount_block which completely ignored the return value of
write_refcount_block and always returned -EIO for bdrv_pwrite failure.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Currently it would consider blocks for which get_refcount fails used. However,
it's unlikely that get_refcount would succeed for the next cluster, so it's not
really helpful. Return an error instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
get_refcount might need to load a refcount block from disk, so errors may
happen. Return the error code instead of assuming a refcount of 1 and change
the callers to respect error return values.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This changes the vpc block driver (for VHD) to read/write multiple sectors at
once instead of doing a request for each single sector.
Before this, running qemu-iotests for VPC took ages, now it's actually quite
reasonable to run it always (down from ~1 hour to 40 seconds for me).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Conflicts:
hw/pc.c
|
|
Move inclusion of stdbool.h to common header files, instead of including
in an ad-hoc manner.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Clean up raw-posix.c to be more consistent using BDRV_SECTOR_SIZE
instead of hard coded 512 values.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
After it is done with updating refcounts in the cache, update_refcount writes
all changed entries to disk. If a refcount block allocation fails, however,
there was no change yet and therefore first_index = last_index = -1. Don't
treat -1 as a normal sector index (resulting in a 512 byte write!) but return
without updating anything in this case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Refblock allocation code needs to take into consideration that update_refcount
will load a different refcount block into the cache, so it must initialize the
cache for a new refcount block only afterwards. Not doing this means that not
only the refcount in the wrong block is updated, but also that the caller will
work on the wrong block.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
write_refcount_block_entries used to return -EIO for any errors. Change this to
return the real error code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Provide the error code to the caller instead of just indicating success/error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qcow2_get_cluster_offset() looks up a given virtual disk offset and returns the
offset of the corresponding cluster in the image file. Errors (e.g. L2 table
can't be read) are currenctly indicated by a return value of 0, which is
unfortuately the same as for any unallocated cluster. So in effect we can't
check for errors.
This makes the old return value a by-reference parameter and returns the usual
0/-errno error code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
l2_allocate has some intermediate states in which the image is inconsistent.
Change the order to write to the L1 table only after the new L2 table has
successfully been initialized.
Also reset the L2 cache in failure case, it's very likely wrong.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If the L2 table was already updated in cache, but writing it to disk has
failed, we must not continue using the changed version in the cache to stay
consistent with what's on the disk.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Casting a pointer to an int doesn't work on 64 bit platforms. Use the %p printf
conversion specifier instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
gcc does not like passing a NULL where an int value is expected:
block/vvfat.c: In function ‘checkpoint’:
block/vvfat.c:2868: error: passing argument 2 of ‘remove_mapping’ makes
integer from pointer without a cast
Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The fix is based on a patch from Kevin Wolf. Here his comment:
"The number of blocks needs to be rounded up to cover all of the virtual hard
disk. Without this fix, we can't even open our own images if their size is not
a multiple of the block size."
While Kevin's patch addressed vdi_create, my modification also fixes
vdi_open which now accepts images with odd disk sizes.
v3:
Don't allow reading of disk images with too large disk sizes.
Neither VBoxManage nor old versions of qemu-img read such images.
This change requires rounding of odd disk sizes before we do the checks.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: François Revol <revol@free.fr>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Dmg actually does an lseek to a negative offset in the open routine,
which we replace with offset arithmetics after doing a bdrv_getlength.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use pread instead of lseek + read in preparation of using the qemu
block API. Note that dmg actually uses the implicit file offset
a lot in dmg_open, and we had to replace it with an offset variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When dmg_read_chunk encounters an uncompressed chunk it currently
calls read without any previous adjustment of the file postion.
This seems very wrong, and the "reference" implementation in
dmg2img does a search to the same offset as done in the various
compression cases, so do the same here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The VHD algorithm calculates a disk geometry
which is usually smaller than the requested size.
QEMU tried to round up but failed for certain sizes:
qemu-img create -f vpc disk.vpc 9437184
would create an image with 9435136 bytes
(which is too small for qemu-img convert).
Instead of hacking the geometry algorithm, the patch
increases the number of sectors until we get enough
sectors.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Even it is not very useful, users may create images of size 0.
Without the special option CONFIG_ZERO_MALLOC, qemu_mallocz
aborts execution when it is told to allocate 0 bytes,
so avoid this kind of call.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use container_of for one direction and &acb->common for the other one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
