| Age | Commit message (Collapse) | Author |
|---|
|
After it is done with updating refcounts in the cache, update_refcount writes
all changed entries to disk. If a refcount block allocation fails, however,
there was no change yet and therefore first_index = last_index = -1. Don't
treat -1 as a normal sector index (resulting in a 512 byte write!) but return
without updating anything in this case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Refblock allocation code needs to take into consideration that update_refcount
will load a different refcount block into the cache, so it must initialize the
cache for a new refcount block only afterwards. Not doing this means that not
only the refcount in the wrong block is updated, but also that the caller will
work on the wrong block.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
write_refcount_block_entries used to return -EIO for any errors. Change this to
return the real error code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Provide the error code to the caller instead of just indicating success/error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qcow2_get_cluster_offset() looks up a given virtual disk offset and returns the
offset of the corresponding cluster in the image file. Errors (e.g. L2 table
can't be read) are currenctly indicated by a return value of 0, which is
unfortuately the same as for any unallocated cluster. So in effect we can't
check for errors.
This makes the old return value a by-reference parameter and returns the usual
0/-errno error code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
l2_allocate has some intermediate states in which the image is inconsistent.
Change the order to write to the L1 table only after the new L2 table has
successfully been initialized.
Also reset the L2 cache in failure case, it's very likely wrong.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If the L2 table was already updated in cache, but writing it to disk has
failed, we must not continue using the changed version in the cache to stay
consistent with what's on the disk.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Casting a pointer to an int doesn't work on 64 bit platforms. Use the %p printf
conversion specifier instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
gcc does not like passing a NULL where an int value is expected:
block/vvfat.c: In function ‘checkpoint’:
block/vvfat.c:2868: error: passing argument 2 of ‘remove_mapping’ makes
integer from pointer without a cast
Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The fix is based on a patch from Kevin Wolf. Here his comment:
"The number of blocks needs to be rounded up to cover all of the virtual hard
disk. Without this fix, we can't even open our own images if their size is not
a multiple of the block size."
While Kevin's patch addressed vdi_create, my modification also fixes
vdi_open which now accepts images with odd disk sizes.
v3:
Don't allow reading of disk images with too large disk sizes.
Neither VBoxManage nor old versions of qemu-img read such images.
This change requires rounding of odd disk sizes before we do the checks.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: François Revol <revol@free.fr>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Dmg actually does an lseek to a negative offset in the open routine,
which we replace with offset arithmetics after doing a bdrv_getlength.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use pread instead of lseek + read in preparation of using the qemu
block API. Note that dmg actually uses the implicit file offset
a lot in dmg_open, and we had to replace it with an offset variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When dmg_read_chunk encounters an uncompressed chunk it currently
calls read without any previous adjustment of the file postion.
This seems very wrong, and the "reference" implementation in
dmg2img does a search to the same offset as done in the various
compression cases, so do the same here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The VHD algorithm calculates a disk geometry
which is usually smaller than the requested size.
QEMU tried to round up but failed for certain sizes:
qemu-img create -f vpc disk.vpc 9437184
would create an image with 9435136 bytes
(which is too small for qemu-img convert).
Instead of hacking the geometry algorithm, the patch
increases the number of sectors until we get enough
sectors.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Even it is not very useful, users may create images of size 0.
Without the special option CONFIG_ZERO_MALLOC, qemu_mallocz
aborts execution when it is told to allocate 0 bytes,
so avoid this kind of call.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use container_of for one direction and &acb->common for the other one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
OpenBSDs gcc is said to generate warnings for this declaration, so don't
reference bdrv_qcow2 directly, but look it up using bdrv_find_format.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This reverts commit 20d97356c9df6d68fbd37d6334fdb7063f24eab6.
The BlockDriver definition should stay at the end of source files.
Conflicts:
block/qcow2.c
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This patch adds the ability to grow qcow2 images in-place using
bdrv_truncate(). This enables qemu-img resize command support for
qcow2.
Snapshots are not supported and bdrv_truncate() will return -ENOTSUP.
The notion of resizing an image with snapshots could lead to confusion:
users may expect snapshots to remain unchanged, but this is not possible
with the current qcow2 on-disk format where the header.size field is
global instead of per-snapshot. Others may expect snapshots to change
size along with the current image data. I think it is safest to not
support snapshots and perhaps add behavior later if there is a
consensus.
Backing images continue to work. If the image is now larger than its
backing image, zeroes are read when accessing beyond the end of the
backing image.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
While it's true that during regular operation free_clusters failure would be a
bug, an I/O error can always happen. There's no need to kill the VM, the worst
thing that can happen (and it will) is that we leak some clusters.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch combines the lseek+read/write calls to use pread/pwrite
instead. This will result in fewer system calls and is already used by
AIO.
Thanks to Jan Kiszka <jan.kiszka@siemens.com> for identifying excessive
lseek and Christoph Hellwig <hch@lst.de> for confirming that this
approach should work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The i loop iterator is shadowed by the next free cluster index. Both
using the variable name 'i' makes the code harder to read.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
It's a format driver, so implement bdrv_open instead of bdrv_file_open.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
VMDK is doing interesting things when it needs to open a backing file. This
patch changes that part to look more like in other drivers. The nice side
effect is that the file name isn't needed any more in the open function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When trying to do COW, VMDK wrote the data back to the backing file. This
problem was revealed by the patch that made backing files read-only. This patch
does not only fix the problem, but also simplifies the VMDK code a bit.
This fixes the backing file qemu-iotests cases for VMDK.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Format drivers shouldn't need to bother with things like file names, but rather
just get an open BlockDriverState for the underlying protocol. This patch
introduces this behaviour for bdrv_open implementation. For protocols which
need to access the filename to open their file/device/connection/... a new
callback bdrv_file_open is introduced which doesn't get an underlying file
opened.
For now, also some of the more obscure formats use bdrv_file_open because they
open() the file themselves instead of using the block.c functions. They need to
be fixed in later patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We're running into various problems because the "raw" file access, which
is used internally by the various image formats is entangled with the
"raw" image format, which maps the VM view 1:1 to a file system.
This patch renames the raw file backends to the file protocol which
is treated like other protocols (e.g. nbd and http) and adds a new
"raw" image format which is just a wrapper around calls to the underlying
protocol.
The patch is surprisingly simple, besides changing the probing logical
in block.c to only look for image formats when using bdrv_open and
renaming of the old raw protocols to file there's almost nothing in there.
For creating images, a new bdrv_create_file is introduced which guesses the
protocol to use. This allows using qemu-img create -f raw (or just using the
default) for both files and host devices. Converting the other format drivers
to use this function to create their images is left for later patches.
The only issues still open are in the handling of the host devices.
Firstly in current qemu we can specifiy the host* format names
on various command line acceping images, but the new code can't
do that without adding some translation. Second the layering breaks
the no_zero_init flag in the BlockDriver used by qemu-img. I'm not
happy how this is done per-driver instead of per-state so I'll
prepare a separate patch to clean this up.
There's some more cleanup opportunity after this patch, e.g. using
separate lists and registration functions for image formats vs
protocols and maybe even host drivers, but this can be done at a
later stage.
Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT
case that I don't quite understand, but which I fear won't work as
expected - possibly even before this patch.
Note that this patch requires various recent block patches from Kevin
and me, which should all be in his block queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Fix clang warnings:
/src/qemu/block/vvfat.c:1102:9: warning: Value stored to 'index3' during its initialization is never read
int index3=index1+1;
/src/qemu/cmd.c:290:15: warning: Value stored to 'p' during its initialization is never read
char *p = result;
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
GCC 3.3.5 generates warnings for static forward declarations of data, so
rearrange code to use static forward declarations of functions instead.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Returning NULL on error doesn't allow distinguishing between different errors.
Change the interface to return an integer for -errno.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Change write_l1_entry to return the real error code instead of -1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Fix qcow2_alloc_cluster_link_l2 to return the real error code like it does in
all other error cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Change write_l2_entries to return the real error code instead of -1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Split up the raw_getlength into separate generic, solaris and BSD
versions to reduce the ifdef maze a bit. The BSD variant still
is a complete maze, but to clean it up properly we'd need some
people using the BSD variants to figure out what code is used
for what variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
What is known today as bdrv_open2 becomes the new bdrv_open. All remaining
callers of the old function are converted to the new one. In some places they
even know the right format, so they should have used bdrv_open2 from the
beginning.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qcow_create2 assumes that the new image will only need one cluster for its
refcount table initially. Obviously that's not true any more when the image is
big enough (exact value depends on the cluster size).
This patch calculates the refcount table size dynamically.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds blkdebug events to qcow2 to allow injecting I/O errors in specific
places.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block drivers can trigger a blkdebug event whenever they reach a place where it
could be useful to inject an error for testing/debugging purposes.
Rules are read from a blkdebug config file and describe which action is taken
when an event is triggered. For now this is only injecting an error (with a few
options) or changing the state (which is an integer). Rules can be declared to
be active only in a specific state; this way later rules can distiguish on
which path we came to trigger their event.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add a mechanism to inject errors instead of passing requests on. With no
further patches applied, you can use it by setting inject_errno in gdb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This isn't doing anything interesting. It creates the blkdebug block driver as
a protocol which just passes everything through to raw.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_open already takes care of this for us.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
