aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)Author
2014-01-31block/vhdx: Error checking fixesMarkus Armbruster
Errors are inadvertently ignored in a few places. Has always been broken. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-31block/vmdk: add basic .bdrv_check supportPeter Lieven
this adds a basic vmdk corruption check. it should detect severe table corruptions and file truncation. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-31block: remove qcow2 .bdrv_make_empty implementationJeff Cody
The QCOW2 .bdrv_make_empty implementation always returns 0 for success, but does not actually do anything. The proper way to not support an optional driver function stub is to just not implement it, so let's remove the stub. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-31block: remove QED .bdrv_make_empty implementationJeff Cody
The QED .bdrv_make_empty() implementation does nothing but return -ENOTSUP, which causes problems in bdrv_commit(). Since the function stub exists for QED, it is called, which then always returns an error. The proper way to not support an optional driver function stub is to just not implement it, so let's remove the stub. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-24Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
* bonzini/scsi-next: scsi: Support TEST UNIT READY in the dummy LUN0 block: add .bdrv_reopen_prepare() stub for iscsi virtio-scsi: Prevent assertion on missed events virtio-scsi: Cleanup of I/Os that never started scsi: Assign cancel_io vector for scsi_disk_emulate_ops Conflicts: block/iscsi.c aliguori: resolve trivial merge conflict in block/iscsi.c Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24qemu-iotests: Test pwritev RMW logicKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24blkdebug: Make required alignment configurableKevin Wolf
The new 'align' option of blkdebug can be used in order to emulate backends with a required 4k alignment on hosts which only really require 512 byte alignment. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24iscsi: Set bs->request_alignmentPaolo Bonzini
The iSCSI backend already gets the block size from the READ CAPACITY command it sends. Save it so that the generic block layer gets it too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24block: Switch BdrvTrackedRequest to byte granularityKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24raw: Probe required direct I/O alignmentPaolo Bonzini
Add a bs->request_alignment field that contains the required offset/length alignment for I/O requests and fill it in the raw block drivers. Use ioctls if possible, else see what alignment it takes for O_DIRECT to succeed. While at it, also expose the memory alignment requirements, which may be (and in practice are) different from the disk alignment requirements. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24block: Update BlockLimits when they might have changedKevin Wolf
When reopening with different flags, or when backing files disappear from the chain, the limits may change. Make sure they get updated in these cases. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoît Canet <benoit@irqsave.net>
2014-01-24block: Move initialisation of BlockLimits to bdrv_refresh_limits()Kevin Wolf
This function separates filling the BlockLimits from bdrv_open(), which allows it to call it from other operations which may change the limits (e.g. modifications to the backing file chain or bdrv_reopen) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: resize backing image during active layer commit, if neededJeff Cody
If the top image to commit is the active layer, and also larger than the base image, then an I/O error will likely be returned during block-commit. For instance, if we have a base image with a virtual size 10G, and a active layer image of size 20G, then committing the snapshot via 'block-commit' will likely fail. This will automatically attempt to resize the base image, if the active layer image to be committed is larger. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24block/curl: Implement the libcurl timer callback interfacePeter Maydell
libcurl versions 7.16.0 and later have a timer callback interface which must be implemented in order for libcurl to make forward progress (it will sometimes rely on being called back on the timeout if there are no file descriptors registered). Implement the callback, and use a QEMU AIO timer to ensure we prod libcurl again when it asks us to. Based on Peter's original patch plus my fix to add curl_multi_timeout_do. Should compile just fine even on older versions of libcurl. I also tried copy-on-read and streaming: $ ./qemu-img create -f qcow2 -o \ backing_file=http://download.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso \ foo.qcow2 1G $ x86_64-softmmu/qemu-system-x86_64 \ -drive if=none,file=foo.qcow2,copy-on-read=on,id=cd \ -device ide-cd,drive=cd --enable-kvm -m 1024 Direct http usage is probably too slow, but with copy-on-read ultimately the image does boot! After some time, streaming gets canceled by an EIO, which needs further investigation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24block: Create authorizations mechanism for external snapshot and resize.Benoît Canet
Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24qmp: Add QMP query-named-block-nodes to list the named BlockDriverState nodes.Benoît Canet
Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24qapi: Add "backing" to BlockStatsFam Zheng
Currently there is no way to query BlockStats of the backing chain. This adds "backing" field into BlockStats to make it possible. The comment of "parent" is reworded. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24vmdk: Fix format specific information (create type) for streamOptimizedFam Zheng
Previously the field is wrong: $ ./qemu-img create -f vmdk -o subformat=streamOptimized /tmp/a.vmdk 1G $ ./qemu-img info /tmp/a.vmdk image: /tmp/a.vmdk file format: vmdk virtual size: 1.0G (1073741824 bytes) disk size: 12K Format specific information: cid: 1390460459 parent cid: 4294967295 >>> create type: monolithicSparse <snip> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24drive mirror:fix memory leakZhang Min
In the function mirror_iteration() -> qemu_iovec_init(), it allocates memory for op->qiov.iov, when the write request calls back, but in the function mirror_iteration_done(), it only frees the op, not free the op->qiov.iov, so this causes memory leak. It should use qemu_iovec_destroy() to free op->qiov. Signed-off-by: Zhang Min <rudy.zhangmin@huawei.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24sheepdog: fix 'qemu-img map'Liu Yuan
It was muted in the previous commit 4bc74be9. Let's revive it since nothing prevents us to do it. With this patch, following command will work as other formats: $ qemu-img map sheepdog:image Cc: qemu-devel@nongnu.org Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24vmdk: Check for overhead when openingFam Zheng
Report an error if file size is even smaller than metadata. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24qcow2: fix wrong value of L1E_OFFSET_MASK, L2E_OFFSET_MASK and REFT_OFFSET_MASKHu Tao
Accoring to qcow spec, the offset fields in l1e, l2e and ref table entry start at bit 9. The offset is cluster offset, and the smallest possible cluster size is 512 bytes. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkverify: Don't require protocol filenameMax Reitz
If the filename is not prefixed by "blkverify:" in blkverify_parse_filename(), the blkverify driver was not selected through that protocol prefix, but by an explicit command line (or QMP) option (like driver=blkverify). If blkverify_parse_filename() has been called, a filename has been given. If it is not prefixed, it is probably really just a plain filename. This is no problem, since we can use it as the test image filename and rely on the user to specify the raw image filename through the new corresponding option. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkverify: Allow command-line configurationMax Reitz
Introduce the "test" and "raw" options for specifying images. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Allow command-line file configurationMax Reitz
Introduce the "image" option as an alternative to specifying the image through the filename. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22block: Allow reference for bdrv_file_open()Max Reitz
Allow specifying a reference to an existing block device (by name) for bdrv_file_open() instead of a filename and/or options. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Use command-line in read_config()Max Reitz
Use qemu_config_parse_qdict() to parse the command-line options in addition to the config file. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Always call read_config()Max Reitz
Move the check whether there actually is a config file into the read_config() function. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Don't require sophisticated filenameMax Reitz
If the filename is not prefixed by "blkdebug:" in blkdebug_parse_filename(), the blkdebug driver was not selected through that protocol prefix, but by an explicit command line option (file.driver=blkdebug or something similar). Contrary to the current reaction, this is not a problem at all; we just need to store the filename (in the x-image option) and can go on; the user just has to manually specify the config option. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Use errp for read_config()Max Reitz
Use an Error variable in the read_config() function. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22vmdk: Fix big flat extent IOFam Zheng
Local variable "n" as int64_t avoids overflow with large sector number calculation. See test case change for failure case. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22sheepdog: fix clone operation by 'qemu-img create -b'Liu Yuan
We should pass base_inode->vdi_id to base_vdi_id of SheepdogVdiReq so that sheep can create a clone instead a fresh volume. This fixes following command: qemu-create -b sheepdog:base sheepdog:clone so users can boot sheepdog:clone as a normal volume. Cc: qemu-devel@nongnu.org Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22gluster: Add support for creating zero-filled imageBharata B Rao
GlusterFS supports creation of zero-filled file on GlusterFS volume by means of an API called glfs_zerofill(). Use this API from QEMU to create an image that is filled with zeroes by using the preallocation option of qemu-img. qemu-img create gluster://server/volume/image -o preallocation=full 10G The allowed values for preallocation are 'full' and 'off'. By default preallocation is off and image is not zero-filled. glfs_zerofill() offloads the writing of zeroes to the server and if the storage supports SCSI WRITESAME, GlusterFS server can issue BLKZEROOUT ioctl to achieve the zeroing. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22gluster: Implement .bdrv_co_write_zeroes for glusterBharata B Rao
Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22gluster: Convert aio routines into coroutinesBharata B Rao
Convert the read, write, flush and discard implementations from aio-based ones to coroutine based ones. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22block/iscsi: return -ENOMEM if an async call fails immediatelyPeter Lieven
if an async libiscsi call fails directly it can only be due to an out of memory condition. All other errors are returned through the callback. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22rbd: switch from pipe to QEMUBH completion notificationStefan Hajnoczi
rbd callbacks are called from non-QEMU threads. Up until now a pipe was used to signal completion back to the QEMU iothread. The pipe writer code handles EAGAIN using select(2). The select(2) API is not scalable since fd_set size is static. FD_SET() can write beyond the end of fd_set if the file descriptor number is too high. (QEMU's main loop uses poll(2) to avoid this issue with select(2).) Since the pipe itself is quite clumsy to use and QEMUBH is now thread-safe, just schedule a BH from the rbd callback function. This way we can simplify I/O completion in addition to eliminating the potential FD_SET() crash when file descriptor numbers become too high. Crash scenario: QEMU already has 1024 file descriptors open. Hotplug an rbd drive and get the pipe writer to take the select(2) code path. Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Tested-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-15block: add .bdrv_reopen_prepare() stub for iscsiJeff Cody
To suppport reopen(), the .bdrv_reopen_prepare() stub must exist. iSCSI does not have anything that needs to be done to support reopen, so we can just implement the _prepare() stub. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-14Merge remote branch 'luiz/queue/qmp' into qmpqEdgar E. Iglesias
* luiz/queue/qmp: migration: qmp_migrate(): keep working after syntax error qerror: Remove assert_no_error() qemu-option: Remove qemu_opts_create_nofail target-i386: Remove assert_no_error usage hw: Remove assert_no_error usages qdev: Delete dead code error: Add error_abort monitor: add object-add (QMP) and object_add (HMP) command monitor: add object-del (QMP) and object_del (HMP) command qom: catch errors in object_property_add_child qom: fix leak for objects created with -object rng: initialize file descriptor to -1 qemu-monitor: HMP cpu-add wrapper vl: add missing transition debug->finish_migrate Message-Id: 1389045795-18706-1-git-send-email-lcapitulino@redhat.com Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-01-10Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
* bonzini/scsi-next: scsi-disk: add UNMAP limits to block limits VPD page block/iscsi: use a bh to schedule co reentrance Message-id: 1387720926-11421-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-06qemu-option: Remove qemu_opts_create_nofailPeter Crosthwaite
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and use error_abort in call sites. null/0 arguments needs to be added for the id and fail_if_exists fields in affected callsites due to argument inconsistency between the normal and no_fail variants. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-12-20commit: Remove unused checkFam Zheng
We support top == active for commit now, remove the check and add an assertion here. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20commit: Support commit active layerFam Zheng
If active is top, it will be mirrored to base, (with block/mirror.c code), then the image is switched when user completes the block job. QMP documentation is updated. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20block: Add commit_active_start()Fam Zheng
commit_active_start is implemented in block/mirror.c, It will create a job with "commit" type and designated base in block-commit command. This will be used for committing active layer of device. Sync mode is removed from MirrorBlockJob because there's no proper type for commit. The used information is is_none_mode. The common part of mirror_start and commit_active_start is moved to mirror_start_job(). Fix the comment wording for commit_start. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20mirror: Move base to MirrorBlockJobFam Zheng
This allows setting the base before entering mirror_run, commit will make use of it. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20mirror: Don't close targetFam Zheng
Let reference count manage target and don't call bdrv_close here. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20vmdk: Allow vmdk_create to work with protocolFam Zheng
This improves vmdk_create to use bdrv_* functions to replace qemu_open and other fd functions. The error handling are improved as well. One difference is that bdrv_pwrite will round up buffer to sectors, so for description file, an extra bdrv_truncate is used in the end to drop inding zeros. Notes: - A bonus bug fix is correct endian is used in initializing GD entries. - ROUND_UP and DIV_ROUND_UP are used where possible. I tested that new code produces exactly the same file as previously. Signed-off-by: Fam Zheng <famz@redhat.com> Tested-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20vmdk: Check VMFS extent line field numberFam Zheng
VMFS extent line in description file should be with 4 fields: RW <size> VMFS "file-name.vmdk" Check the number explicitly and report error if offset is appended as FLAT, which should be invalid format. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20block: vhdx - improve error message, and .bdrv_check implementationJeff Cody
If there is a dirty log file to be replayed in a VHDX image, it is replayed in .vhdx_open(). However, if the file is opened read-only, then a somewhat cryptic error message results. This adds a more helpful error message for the user. If an image file contains a log to be replayed, and is opened read-only, the user is instructed to run 'qemu-img check -r all' on the image file. Running qemu-img check -r all will cause the image file to be opened r/w, which will replay the log file. If a log file replay is detected, this is flagged, and bdrv_check will increase the corruptions_fixed count for the image. [Fixed typo in error message that was pointed out by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)Stefan Weil
Function iscsi_read10_task got additional parameters starting with version libiscsi 1.5.0. libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux distributions currently provide packages for QEMU which use it), so we still need support for this older API. Reviewed-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-17 21:21:30 +0000