| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
There's only a couple of bdrv_read() and bdrv_write() calls left in
the vvfat code, and they can be trivially replaced with the byte-based
bdrv_pread() and bdrv_pwrite().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.
Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Don't leak 'cluster' in the mapping == NULL case. Found by Coverity
(CID 1055918).
Fixes: 8d9401c2791ee2d2805b741b1ee3006041edcd3e
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
The calls to find_mapping_for_cluster() may return NULL but it
isn't always checked for before dereferencing the value returned.
Additionally, add some asserts to cover cases where NULL can't
be returned but which might not be obvious at first glance.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Message-id: 1541453919-25973-5-git-send-email-Liam.Merwick@oracle.com
[mreitz: Dropped superfluous check of "mapping" following an assertion
that it is not NULL, and fixed some indentation]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Some block drivers have traditionally changed their node to read-only
mode without asking the user. This behaviour has been marked deprecated
since 2.11, expecting users to provide an explicit read-only=on option.
Now that we have auto-read-only=on, enable these drivers to make use of
the option.
This is the only use of bdrv_set_read_only(), so we can make it a bit
more specific and turn it into a bdrv_apply_auto_read_only() that is
more convenient for drivers to use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
If a management application builds the block graph node by node, the
protocol layer doesn't inherit its read-only option from the format
layer any more, so it must be set explicitly.
Backing files should work on read-only storage, but at the same time, a
block job like commit should be able to reopen them read-write if they
are on read-write storage. However, without option inheritance, reopen
only changes the read-only option for the root node (typically the
format layer), but not the protocol layer, so reopening fails (the
format layer wants to get write permissions, but the protocol layer is
still read-only).
A simple workaround for the problem in the management tool would be to
open the protocol layer always read-write and to make only the format
layer read-only for backing files. However, sometimes the file is
actually stored on read-only storage and we don't know whether the image
can be opened read-write (for example, for NBD it depends on the server
we're trying to connect to). This adds an option that makes QEMU try to
open the image read-write, but allows it to degrade to a read-only mode
without returning an error.
The documentation for this option is consciously phrased in a way that
allows QEMU to switch to a better model eventually: Instead of trying
when the image is first opened, making the read-only flag dynamic and
changing it automatically whenever the first BLK_PERM_WRITE user is
attached or the last one is detached would be much more useful
behaviour.
Unfortunately, this more useful behaviour is also a lot harder to
implement, and libvirt needs a solution now before it can switch to
-blockdev, so let's start with this easier approach for now.
Instead of adding a new auto-read-only option, turning the existing
read-only into an enum (with a bool alternate for compatibility) was
considered, but it complicated the implementation to the point that it
didn't seem to be worth it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
When using the vvfat driver with a directory that contains too many files,
QEMU currently crashes. This can be triggered like this for example:
mkdir /tmp/vvfattest
cd /tmp/vvfattest
for ((x=0;x<=513;x++)); do mkdir $x; done
qemu-system-x86_64 -drive \
file.driver=vvfat,file.dir=.,read-only=on,media=cdrom
Seems like read_directory() is changing the mapping->path variable. Make
sure we use the right pointer instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
It's annoying to see this debug message every time you use vvfat.
Disable it with the DLOG() macro by default, as it is done with the
other debug messages in this file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In the future, bdrv_drained_all_begin/end() will drain all invidiual
nodes separately rather than whole subtrees. This means that we don't
want to propagate the drain to all parents any more: If the parent is a
BDS, it will already be drained separately. Recursing to all parents is
unnecessary work and would make it an O(n²) operation.
Prepare the drain function for the changed drain_all by adding an
ignore_bds_parents parameter to the internal implementation that
prevents the propagation of the drain to BDS parents. We still (have to)
propagate it to non-BDS parents like BlockBackends or Jobs because those
are not drained separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There are numerous QDict functions that have been introduced for and are
used only by the block layer. Move their declarations into an own
header file to reflect that.
While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them. Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Overriding flags violates the precedence rules of
bdrv_reopen_queue_child. Just like the read-only option, no-flush should
be put into the options. The same is done in bdrv_temp_snapshot_options.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the vvfat driver accordingly. Note that we
can rely on the block driver having already clamped limits to our
block size, and simplify accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
|
|
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
|
|
We currently do not guard everywhere against a NULL bs->drv where we
should be doing so. Most of the places fixed here just do not care
about that case at all.
Some care implicitly, e.g. through a prior function call to
bdrv_getlength() which would always fail for an ejected BDS. Add an
assert there to make it more obvious.
Other places seem to care, but do so insufficiently: Freeing clusters in
a qcow2 image is an error-free operation, but it may leave the image in
an unusable state anyway. Giving qcow2_free_clusters() an error code is
not really viable, it is much easier to note that bs->drv may be NULL
even after a successful driver call. This concerns bdrv_co_flush(), and
the way the check is added to bdrv_co_pdiscard() (in every iteration
instead of only once).
Finally, some places employ at least an assert(bs->drv); somewhere, that
may be reasonable (such as in the reopen code), but in
bdrv_has_zero_init(), it is definitely not. Returning 0 there in case
of an ejected BDS saves us much headache instead.
Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1728660
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110203111.7666-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
bdrv_set_read_only() is used by some block drivers to override the
read-only option given by the user. This is not how read-only images
generally work in QEMU: Instead of second guessing what the user really
meant (which currently includes making an image read-only even if the
user didn't only use the default, but explicitly said read-only=off), we
should error out if we can't provide what the user requested.
This adds deprecation warnings to all callers of bdrv_set_read_only() so
that the behaviour can be corrected after the usual deprecation period.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In the context of bdrv_reopen(), we'll have to look at the state of the
graph as it will be after the reopen. This interface addition is in
preparation for the change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Remove the unnecessary home-grown redefinition of the assert() macro here,
and remove the unusable debug code at the end of the checkpoint() function.
The code there uses assert() with side-effects (assignment to the "mapping"
variable), which should be avoided. Looking more closely, it seems as it is
apparently also only usable for one certain directory layout (with a file
named USB.H in it) and thus is of no use for the rest of the world.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Tidy up some of the warn_report() messages after having converted them
to use warn_report().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
gcc 7 complains that the sprintf() might write a null byte beyond the
end of the tail buffer. That is wrong, but we can silence it by making
i unsigned (it can never be negative anyway, see the if condition right
before). For some reason, this allows gcc to suddenly accurately
calculate the range of i so we can give the tail[] array the exact size
it needs to have (which is 8 bytes) without gcc complaining.
In addition, let us convert the sprintf() to snprintf(), because that is
always nicer, and add an assertion about the range of the return value
afterwards so we can see that "8 - len" will never be negative and thus
"entry->name + MIN(j, 8 - len)" will never be out of bounds.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This prevents some host to guest memory content leaks.
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Write support works again when image contains non-ASCII names. It is either the
case when user created a non-ASCII filename, or when initial directory contained
a non-ASCII filename (since 0c36111f57ec2188f679e7fa810291b7386bdca1)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Also add links to related compatibility problems.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-6-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned
on input and that *pnum is sector-aligned on return to the caller,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, this code adds usages like
DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned
values, where the call might reasonbly give non-aligned results
in the future; on the other hand, no rounding is needed for callers
that should just continue to work with byte alignment.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_is_allocated(). But
some code, particularly bdrv_commit(), gets a lot simpler because it
no longer has to mess with sectors; also, it is now possible to pass
NULL if the caller does not care how much of the image is allocated
beyond the initial offset. Leave comments where we can further
simplify once a later patch eliminates the need for sector-aligned
requests through bdrv_is_allocated().
For ease of review, bdrv_is_allocated_above() will be tackled
separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
According to specification:
"'MSWIN4.1' is the recommanded setting, because it is the setting least likely
to cause compatibility problems. If you want to put something else in here,
that is your option, but the result may be that some FAT drivers might not
recognize the volume."
Specification: "FAT: General overview of on-disk format" v1.03, page 9
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Specification: "FAT: General overview of on-disk format" v1.03, page 23
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
FAT12/FAT16 root directory is two sectors in size, which allows only 512 directory entries.
Prevent QEMU startup if too much files exist, instead of overflowing root directory.
Also introduce variable root_entries, which will be required for FAT32.
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539/comments/4
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
More specifically:
- try without numeric-tail only if LFN didn't have invalid short chars
- start at ~1 (instead of ~0)
- handle case if numeric tail is more than one char (ie > 10)
Windows 9x Scandisk doesn't see anymore mismatches between short file names and
long file names for non-ASCII filenames.
Specification: "FAT: General overview of on-disk format" v1.03, page 31
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
More specifically, create short name from filename and change blacklist of
invalid chars to whitelist of valid chars.
Windows 9x also now correctly see long file names of filenames containing a space,
but Scandisk still complains about mismatch between SFN and LFN.
[kwolf: Build fix for this intermediate patch (it included declarations
for variables that are only used in the next patch) ]
Specification: "FAT: General overview of on-disk format" v1.03, pages 30-31
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Assume that input filename is encoded as UTF-8, so correctly create UTF-16 encoding.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
readdir() doesn't always return . and .. entries at first and in that order.
This leads to not creating them at first in the directory, which raises some
errors on file system checking utilities like MS-DOS Scandisk.
Specification: "FAT: General overview of on-disk format" v1.03, page 25
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Specification: "FAT: General overview of on-disk format" v1.03, pages 11-13
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
- offset_to_bootsector is the number of sectors up to FAT bootsector
- offset_to_fat is the number of sectors up to first File Allocation Table
- offset_to_root_dir is the number of sectors up to root directory sector
Replace first_sectors_number - 1 by offset_to_bootsector.
Replace first_sectors_number by offset_to_fat.
Replace faked_sectors by offset_to_rootdir.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
MODE_FAKED and MODE_RENAMED are not and were never used.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This was a complete mess. On 2299 indented lines:
- 1329 were with spaces only
- 617 with tabulations only
- 353 with spaces and tabulations
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
- bs->total_sectors is the number of sectors of the whole disk
- s->sector_count is the number of sectors of the FAT partition
This fixes the following assert in qemu-img map:
qemu-img.c:2641: get_block_status: Assertion `nb_sectors' failed.
This also fixes an infinite loop in qemu-img convert.
Fixes: 4480e0f924a42e1db8b8cfcac4d0634dd1bb27a0
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539
Cc: qemu-stable@nongnu.org
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This allows us to remove lots of includes of migration/migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
A few block drivers will set the BDS read_only flag from their
.bdrv_open() function. This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().
This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.
This patch also changes the behavior of vvfat. Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.
For instance, this -drive parameter would result in a writable image:
"-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on"
This is not correct. Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
|
|
We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
|
