aboutsummaryrefslogtreecommitdiff
path: root/block/vhdx.c
AgeCommit message (Collapse)Author
2022-03-07osdep: Move memalign-related functions to their own headerPeter Maydell
Move the various memalign-related functions out of osdep.h and into their own header, which we include only where they are used. While we're doing this, add some brief documentation comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
2020-09-15block/vhdx: Support vhdx image only with 512 bytes logical sector sizeSwapnil Ingle
block/vhdx uses qemu block layer where sector size is always 512 bytes. This may have issues with 4K logical sector sized vhdx image. For e.g qemu-img convert on such images fails with following assert: $qemu-img convert -f vhdx -O raw 4KTest1.vhdx test.raw qemu-img: util/iov.c:388: qiov_slice: Assertion `offset + len <= qiov->size' failed. Aborted This patch adds an check to return ENOTSUP for vhdx images which have logical sector size other than 512 bytes. Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com> Message-Id: <1596794594-44531-1-git-send-email-swapnil.ingle@nutanix.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-07-10error: Avoid error_propagate() after migrate_add_blocker()Markus Armbruster
When migrate_add_blocker(blocker, &errp) is followed by error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). Do that with this Coccinelle script: @@ expression blocker, err, errp; expression ret; @@ - ret = migrate_add_blocker(blocker, &err); - if (err) { + ret = migrate_add_blocker(blocker, errp); + if (ret < 0) { ... when != err; - error_propagate(errp, err); ... } @@ expression blocker, err, errp; @@ - migrate_add_blocker(blocker, &err); - if (err) { + if (migrate_add_blocker(blocker, errp) < 0) { ... when != err; - error_propagate(errp, err); ... } Double-check @err is not used afterwards. Dereferencing it would be use after free, but checking whether it's null would be legitimate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-43-armbru@redhat.com>
2020-07-10qapi: Smooth another visitor error checking patternMarkus Armbruster
Convert visit_type_FOO(v, ..., &ptr, &err); ... if (err) { ... } to visit_type_FOO(v, ..., &ptr, errp); ... if (!ptr) { ... } for functions that set @ptr to non-null / null on success / error. Eliminate error_propagate() that are now unnecessary. Delete @err that are now unused. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-40-armbru@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-06block/vhdx: drop unallocated_blocks_are_zeroVladimir Sementsov-Ogievskiy
vhdx doesn't have .bdrv_co_block_status handler, so DATA|ALLOCATED is always assumed for it in bdrv_co_block_status(). unallocated_blocks_are_zero is useless (it doesn't affect the only user of the field: bdrv_co_block_status()), drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-9-vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-18block: Use bdrv_default_perms()Max Reitz
bdrv_default_perms() can decide which permission profile to use based on the BdrvChildRole, so block drivers do not need to select it explicitly. The blkverify driver now no longer shares the WRITE permission for the image to verify. We thus have to adjust two places in test-block-iothread not to take it. (Note that in theory, blkverify should behave like quorum in this regard and share neither WRITE nor RESIZE for both of its children. In practice, it does not really matter, because blkverify is used only for debugging, so we might as well keep its permissions rather liberal.) Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-30-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18block: Make format drivers use child_of_bdsMax Reitz
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the BdrvChildRole; but there are exceptions for drivers with external data files (qcow2 and vmdk). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-26-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18block: Add BdrvChildRole to BdrvChildMax Reitz
For now, it is always set to 0. Later patches in this series will ensure that all callers pass an appropriate combination of flags. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-6-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18block: Add BlockDriver.is_formatMax Reitz
We want to unify child_format and child_file at some point. One of the important things that set format drivers apart from other drivers is that they do not expect other format nodes under them (except in the backing chain), i.e. we must not probe formats inside of formats. That means we need something on which to distinguish format drivers from others, and hence this flag. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20200513110544.176672-3-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-08vhdx: Rework truncation logicEric Blake
The vhdx driver uses truncation for image growth, with a special case for blocks that already read as zero but which are only being partially written. But with a bit of rearranging, it's just as easy to defer the decision on whether truncation resulted in zeroes to the actual allocation attempt, reducing the number of places that still use bdrv_has_zero_init_truncate. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200428202905.770727-9-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-05Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-05-05' ↵Peter Maydell
into staging Block patches: - Asynchronous copying for block-copy (i.e., the backup job) - Allow resizing of qcow2 images when they have internal snapshots - iotests: Logging improvements for Python tests - iotest 153 fix, and block comment cleanups # gpg: Signature made Tue 05 May 2020 13:56:58 BST # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2020-05-05: (24 commits) block/block-copy: use aio-task-pool API block/block-copy: refactor task creation block/block-copy: add state pointer to BlockCopyTask block/block-copy: alloc task on each iteration block/block-copy: rename in-flight requests to tasks Fix iotest 153 block: Comment cleanups qcow2: Tweak comment about bitmaps vs. resize qcow2: Allow resize of images with internal snapshots block: Add blk_new_with_bs() helper iotests: use python logging for iotests.log() iotests: Mark verify functions as private iotest 258: use script_main iotests: add script_initialize iotests: add hmp helper with logging iotests: limit line length to 79 chars iotests: touch up log function signature iotests: drop pre-Python 3.4 compatibility code iotests: alphabetize standard imports iotests: add pylintrc file ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-05block: Add blk_new_with_bs() helperEric Blake
There are several callers that need to create a new block backend from an existing BDS; make the task slightly easier with a common helper routine. Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200424190903.522087-2-eblake@redhat.com> [mreitz: Set @ret only in error paths, see https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html] Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200428192648.749066-2-eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-04Compress lines for immediate returnSimran Singhal
Compress two lines into a single line if immediate return statement is found. It also remove variables progress, val, data, ret and sock as they are no longer needed. Remove space between function "mixer_load" and '(' to fix the checkpatch.pl error:- ERROR: space prohibited between function name and open parenthesis '(' Done using following coccinelle script: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200401165314.GA3213@simran-Inspiron-5558> [lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-04-30block-backend: Add flags to blk_truncate()Kevin Wolf
Now that node level interface bdrv_truncate() supports passing request flags to the block driver, expose this on the BlockBackend level, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200424125448.63318-4-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-04-30block: Add flags to bdrv(_co)_truncate()Kevin Wolf
Now that block drivers can support flags for .bdrv_co_truncate, expose the parameter in the node level interfaces bdrv_co_truncate() and bdrv_truncate(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200424125448.63318-3-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-04-29various: Remove suspicious '\' character outside of #define in C codePhilippe Mathieu-Daudé
Fixes the following coccinelle warnings: $ spatch --sp-file --verbose-parsing ... \ scripts/coccinelle/remove_local_err.cocci ... SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213 SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329 SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133 SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081 SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529 SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468 SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173 Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200412223619.11284-2-f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-26block: pass BlockDriver reference to the .bdrv_co_createMaxim Levitsky
This will allow the reuse of a single generic .bdrv_co_create implementation for several drivers. No functional changes. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block: Add @exact parameter to bdrv_co_truncate()Max Reitz
We have two drivers (iscsi and file-posix) that (in some cases) return success from their .bdrv_co_truncate() implementation if the block device is larger than the requested offset, but cannot be shrunk. Some callers do not want that behavior, so this patch adds a new parameter that they can use to turn off that behavior. This patch just adds the parameter and lets the block/io.c and block/block-backend.c functions pass it around. All other callers always pass false and none of the implementations evaluate it, so that this patch does not change existing behavior. Future patches take care of that. Suggested-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-5-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-14block/vhdx: add check for truncated image filesPeter Lieven
qemu is currently not able to detect truncated vhdx image files. Add a basic check if all allocated blocks are reachable at open and report all errors during bdrv_co_check. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-08-19vhdx: Fix .bdrv_has_zero_init()Max Reitz
Fixed VHDX images cannot guarantee to be zero-initialized. If the image has the "fixed" subformat, forward the call to the underlying storage node. Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190724171239.8764-9-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-19block: Use bdrv_has_zero_init_truncate()Max Reitz
vhdx and parallels call bdrv_has_zero_init() when they do not really care about an image's post-create state but only about what happens when you grow an image. That is a bit ugly, and also overly safe when growing preallocated images without preallocating the new areas. Let them use bdrv_has_zero_init_truncate() instead. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190724171239.8764-6-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> [mreitz: Added commit message] Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-04block: Add BlockBackend.ctxKevin Wolf
This adds a new parameter to blk_new() which requires its callers to declare from which AioContext this BlockBackend is going to be used (or the locks of which AioContext need to be taken anyway). The given context is only stored and kept up to date when changing AioContexts. Actually applying the stored AioContext to the root node is saved for another commit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/vhdx: Use IEC binary prefixes for size constantsStefano Garzarella
Using IEC binary prefixes in order to make the code more readable, with the exception of DEFAULT_LOG_SIZE because it's passed to stringify(). Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/vhdx: Remove redundant IEC binary prefixes definitionStefano Garzarella
IEC binary prefixes are already defined in "qemu/units.h", so we can remove redundant definitions in "block/vhdx.h". Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-05block/vhdx: Don't take address of fields in packed structsPeter Maydell
Taking the address of a field in a packed struct is a bad idea, because it might not be actually aligned enough for that pointer type (and thus cause a crash on dereference on some host architectures). Newer versions of clang warn about this. Avoid the bug by not using the "modify in place" byte swapping functions. There are a few places where the in-place swap function is used on something other than a packed struct field; we convert those anyway, for consistency. Patch produced with scripts/coccinelle/inplace-byteswaps.cocci. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-23block: Fix typos in comments (found by codespell)Stefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-29vhdx: Switch to byte-based callsEric Blake
We are gradually moving away from sector-based interfaces, towards byte-based. Make the change for the last few sector-based calls into the block layer from the vhdx driver. Ideally, the vhdx driver should switch to doing everything byte-based, but that's a more invasive change that requires a bit more auditing. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Factor out qobject_input_visitor_new_flat_confused()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Clean up a misuse of qobject_to() in .bdrv_co_create_opts()Markus Armbruster
The following pattern occurs in the .bdrv_co_create_opts() methods of parallels, qcow, qcow2, qed, vhdx and vpc: qobj = qdict_crumple_for_keyval_qiv(qdict, errp); qobject_unref(qdict); qdict = qobject_to(QDict, qobj); if (qdict == NULL) { ret = -EINVAL; goto done; } v = qobject_input_visitor_new_keyval(QOBJECT(qdict)); [...] ret = 0; done: qobject_unref(qdict); [...] return ret; If qobject_to() fails, we return failure without setting errp. That's wrong. As far as I can tell, it cannot fail here. Clean it up anyway, by removing the useless conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Fix -blockdev for certain non-string scalarsMarkus Armbruster
Configuration flows through the block subsystem in a rather peculiar way. Configuration made with -drive enters it as QemuOpts. Configuration made with -blockdev / blockdev-add enters it as QAPI type BlockdevOptions. The block subsystem uses QDict, QemuOpts and QAPI types internally. The precise flow is next to impossible to explain (I tried for this commit message, but gave up after wasting several hours). What I can explain is a flaw in the BlockDriver interface that leads to this bug: $ qemu-system-x86_64 -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234 qemu-system-x86_64: -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234: Internal error: parameter user invalid QMP blockdev-add is broken the same way. Here's what happens. The block layer passes configuration represented as flat QDict (with dotted keys) to BlockDriver methods .bdrv_file_open(). The QDict's members are typed according to the QAPI schema. nfs_file_open() converts it to QAPI type BlockdevOptionsNfs, with qdict_crumple() and a qobject input visitor. This visitor comes in two flavors. The plain flavor requires scalars to be typed according to the QAPI schema. That's the case here. The keyval flavor requires string scalars. That's not the case here. nfs_file_open() uses the latter, and promptly falls apart for members @user, @group, @tcp-syn-count, @readahead-size, @page-cache-size, @debug. Switching to the plain flavor would fix -blockdev, but break -drive, because there the scalars arrive in nfs_file_open() as strings. The proper fix would be to replace the QDict by QAPI type BlockdevOptions in the BlockDriver interface. Sadly, that's beyond my reach right now. Next best would be to fix the block layer to always pass correctly typed QDicts to the BlockDriver methods. Also beyond my reach. What I can do is throw another hack onto the pile: have nfs_file_open() convert all members to string, so use of the keyval flavor actually works, by replacing qdict_crumple() by new function qdict_crumple_for_keyval_qiv(). The pattern "pass result of qdict_crumple() to qobject_input_visitor_new_keyval()" occurs several times more: * qemu_rbd_open() Same issue as nfs_file_open(), but since BlockdevOptionsRbd has only string members, its only a latent bug. Fix it anyway. * parallels_co_create_opts(), qcow_co_create_opts(), qcow2_co_create_opts(), bdrv_qed_co_create_opts(), sd_co_create_opts(), vhdx_co_create_opts(), vpc_co_create_opts() These work, because they create the QDict with qemu_opts_to_qdict_filtered(), which creates only string scalars. The function sports a TODO comment asking for better typing; that's going to be fun. Use qdict_crumple_for_keyval_qiv() to be safe. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Add block-specific QDict headerMax Reitz
There are numerous QDict functions that have been introduced for and are used only by the block layer. Move their declarations into an own header file to reflect that. While qdict_extract_subqdict() is in fact used outside of the block layer (in util/qemu-config.c), it is still a function related very closely to how the block layer works with nested QDicts, namely by sometimes flattening them. Therefore, its declaration is put into this header as well and util/qemu-config.c includes it with a comment stating exactly which function it needs. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20180509165530.29561-7-mreitz@redhat.com> [Copyright note tweaked, superfluous includes dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-31block: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-05-29vhdx: Fix vhdx_co_create() return valueKevin Wolf
.bdrv_co_create() is supposed to return 0 on success, but vhdx could return a positive value instead. Fix this. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-05-15block: Merge .bdrv_co_writev{,_flags} in driversEric Blake
We have too many driver callback interfaces; simplify the mess somewhat by merging the flags parameter of .bdrv_co_writev_flags() into .bdrv_co_writev(). Note that as long as a driver doesn't set .supported_write_flags, the flags argument will be 0 and behavior is identical. Also note that the public function bdrv_co_writev() still lacks a flags argument; so the driver signature is thus intentionally slightly different. But that's not the end of the world, nor the first time that the driver interface differs slightly from the public interface. Ideally, we should be rewriting all of these drivers to use modern byte-based interfaces. But that's a more invasive patch to write and audit, compared to the simplification done here. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-04qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREFMarc-André Lureau
Now that we can safely call QOBJECT() on QObject * as well as its subtypes, we can have macros qobject_ref() / qobject_unref() that work everywhere instead of having to use QINCREF() / QDECREF() for QObject and qobject_incref() / qobject_decref() for its subtypes. The replacement is mechanical, except I broke a long line, and added a cast in monitor_qmp_cleanup_req_queue_locked(). Unlike qobject_decref(), qobject_unref() doesn't accept void *. Note that the new macros evaluate their argument exactly once, thus no need to shout them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased, semantic conflict resolved, commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-03-26vhdx: Check for 4 GB maximum log size on creationKevin Wolf
It's unclear what the real maximum is, but we use an uint32_t to store the log size in vhdx_co_create(), so we should check that the given value fits in 32 bits. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-03-26vhdx: Don't use error_setg_errno() with constant errnoKevin Wolf
error_setg_errno() is meant for cases where we got an errno from the OS that can add useful extra information to an error message. It's pointless if we pass a constant errno, these cases should use plain error_setg(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-03-26vhdx: Require power-of-two block size on createKevin Wolf
Images with a non-power-of-two block size are invalid and cannot be opened. Reject such block sizes when creating an image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-03-19qapi: Replace qobject_to_X(o) by qobject_to(X, o)Max Reitz
This patch was generated using the following Coccinelle script: @@ expression Obj; @@ ( - qobject_to_qnum(Obj) + qobject_to(QNum, Obj) | - qobject_to_qstring(Obj) + qobject_to(QString, Obj) | - qobject_to_qdict(Obj) + qobject_to(QDict, Obj) | - qobject_to_qlist(Obj) + qobject_to(QList, Obj) | - qobject_to_qbool(Obj) + qobject_to(QBool, Obj) ) and a bit of manual fix-up for overly long lines and three places in tests/check-qjson.c that Coccinelle did not find. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20180224154033.29559-4-mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: swap order from qobject_to(o, X), rebase to master, also a fix to latent false-positive compiler complaint about hw/i386/acpi-build.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19vhdx: Support .bdrv_co_createKevin Wolf
This adds the .bdrv_co_create driver callback to vhdx, which enables image creation over QMP. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-09block: convert bdrv_check callback to coroutine_fnPaolo Bonzini
Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1516279431-30424-8-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02block: rename .bdrv_create() to .bdrv_co_create_opts()Stefan Hajnoczi
BlockDriver->bdrv_create() has been called from coroutine context since commit 5b7e1542cfa41a281af9629d31cef03704d976e6 ("block: make bdrv_create adopt coroutine"). Make this explicit by renaming to .bdrv_co_create_opts() and add the coroutine_fn annotation. This makes it obvious to block driver authors that they may yield, use CoMutex, or other coroutine_fn APIs. bdrv_co_create is reserved for the QAPI-based version that Kevin is working on. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170705102231.20711-2-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2017-11-14block/vhdx.c: Don't blindly update the headerJeff Cody
The VHDX specification requires that before user data modification of the vhdx image, the VHDX header file and data GUIDs need to be updated. In vhdx_open(), if the image is set to RDWR, we go ahead and update the header. However, just because the image is set to RDWR does not mean we can go ahead and write at this point - specifically, if the QEMU run state is INMIGRATE, the underlying file BS may be set to inactive via the BDS open flag of BDRV_O_INACTIVE. Attempting to write under this condition will cause an assert in bdrv_co_pwritev(). We can alternatively latch the first time the image is written. And lo and behold, we do just that, via vhdx_user_visible_write() in vhdx_co_writev(). This means the call to vhdx_update_headers() in vhdx_open() is likely just vestigial, and can be removed. Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Jeff Cody <jcody@redhat.com> Message-id: 659e4cdba6ef4c651737852777c8c93d27b38040.1510059970.git.jcody@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-08-08block/vhdx: check for offset overflow to bdrv_truncate()Jeff Cody
VHDX uses uint64_t types for most offsets, following the VHDX spec. However, bdrv_truncate() takes an int64_t value for the truncating offset. Check for overflow before calling bdrv_truncate(). While we are here, replace the bit shifting with QEMU_ALIGN_UP as well. N.B.: For a compliant image this is not an issue, as the maximum VHDX image size is defined per the spec to be 64TB. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-08block/vhdx: check error return of bdrv_getlength()Jeff Cody
Calls to bdrv_getlength() were not checking for error. In vhdx.c, this can lead to truncating an image file, so it is a definite bug. In vhdx-log.c, the path for improper behavior is less clear, but it is best to check in any case. Some minor code movement of the log_guid intialization, as well. Reported-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-11block: Add PreallocMode to blk_truncate()Max Reitz
blk_truncate() itself will pass that value to bdrv_truncate(), and all callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF for now. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-4-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: Add PreallocMode to bdrv_truncate()Max Reitz
For block drivers that just pass a truncate request to the underlying protocol, we can now pass the preallocation mode instead of aborting if it is not PREALLOC_MODE_OFF. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-3-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>