aboutsummaryrefslogtreecommitdiff
path: root/block/sheepdog.c
AgeCommit message (Collapse)Author
2017-04-28block: Add errp to BD.bdrv_truncate()Max Reitz
Add an Error parameter to the block drivers' bdrv_truncate() interface. If a block driver does not set this in case of an error, the generic bdrv_truncate() implementation will do so. Where it is obvious, this patch also makes some block drivers set this value. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-4-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-24socket: Make errp the last parameter of socket_connectFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-2-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-11sheepdog: Fix crash in co_read_response()Kevin Wolf
This fixes a regression introduced in commit 9d456654. aio_co_wake() can only be used to reenter a coroutine that was already previously entered, otherwise co->ctx is uninitialised and we access garbage. Using it immediately after qemu_coroutine_create() like in co_read_response() is wrong and causes segfaults. Replace the call with aio_co_enter(), which gets an explicit AioContext parameter and works even for new coroutines. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Kashyap Chamarthy <kchamart@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1491919733-21065-1-git-send-email-kwolf@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-11sheepdog: Use bdrv_coroutine_enter before BDRV_POLL_WHILEFam Zheng
When called from main thread, the coroutine should run in the context of bs. Use bdrv_coroutine_enter to ensure that. Signed-off-by: Fam Zheng <famz@redhat.com>
2017-04-03sheepdog: Fix blockdev-addMarkus Armbruster
Commit 831acdc "sheepdog: Implement bdrv_parse_filename()" and commit d282f34 "sheepdog: Support blockdev-add" have different ideas on how the QemuOpts parameters for the server address are named. Fix that. While there, rename BlockdevOptionsSheepdog member addr to server, for consistency with BlockdevOptionsSsh, BlockdevOptionsGluster, BlockdevOptionsNbd. Commit 831acdc's example becomes --drive driver=sheepdog,server.type=inet,server.host=fido,server.port=7000,vdi=dolly instead of --drive driver=sheepdog,host=fido,vdi=dolly Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Kashyap Chamarthy <kchamart@redhat.com> Message-id: 1490895797-29094-10-git-send-email-armbru@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-03-07sheepdog: Implement bdrv_parse_filename()Markus Armbruster
This permits configuration with driver-specific options in addition to pseudo-filename parsed as URI. For instance, --drive driver=sheepdog,host=fido,vdi=dolly instead of --drive driver=sheepdog,file=sheepdog://fido/dolly It's also a first step towards supporting blockdev-add. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07sheepdog: Use SocketAddress and socket_connect()Markus Armbruster
sd_parse_uri() builds a string from host and port parts for inet_connect(). inet_connect() parses it into host, port and options. Whether this gets exactly the same host, port and no options for all inputs is not obvious. Cut out the string middleman and build a SocketAddress for socket_connect() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07sheepdog: Report errors in pseudo-filename more usefullyMarkus Armbruster
Errors in the pseudo-filename are all reported with the same laconic "Can't parse filename" message. Add real error reporting, such as: $ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepdog:/// qemu-system-x86_64: --drive driver=sheepdog,filename=sheepdog:///: missing file path in URI $ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepgod:///vdi qemu-system-x86_64: --drive driver=sheepdog,filename=sheepgod:///vdi: URI scheme must be 'sheepdog', 'sheepdog+tcp', or 'sheepdog+unix' $ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepdog+unix:///vdi?socke=sheepdog.sock qemu-system-x86_64: --drive driver=sheepdog,filename=sheepdog+unix:///vdi?socke=sheepdog.sock: unexpected query parameters The code to translate legacy syntax to URI fails to escape URI meta-characters. The new error messages are misleading then. Replace them by the old "Can't parse filename" message. "Internal error" would be more honest. Anyway, no worse than before. Also add a FIXME comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07sheepdog: Don't truncate long VDI name in _open(), _create()Markus Armbruster
sd_parse_uri() truncates long VDI names silently. Reject them instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07sheepdog: Fix snapshot ID parsing in _open(), _create, _goto()Markus Armbruster
sd_parse_uri() and sd_snapshot_goto() screw up error checking after strtoul(), and truncate long tag names silently. Fix by replacing those parts by new sd_parse_snapid_or_tag(), which checks more carefully. sd_snapshot_delete() also parses snapshot IDs, but is currently too broken for me to touch. Mark TODO. Two calls of strtol() without error checking remain in parse_redundancy(). Mark them FIXME. More silent truncation of configuration strings remains elsewhere. Not marked. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07sheepdog: Mark sd_snapshot_delete() lossage FIXMEMarkus Armbruster
sd_snapshot_delete() should delete the snapshot whose ID matches @snapshot_id and whose name matches @name. But that's not what it does. If @snapshot_id is a valid ID, it deletes the snapshot with that ID, else it deletes the snapshot with that name. It doesn't use @name at all. Add suitable FIXME comments, so someone who actually knows Sheepdog can fix it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07sheepdog: Fix error handling sd_create()Markus Armbruster
As a bdrv_create() method, sd_create() must set an error and return negative errno on failure. It prints the error instead of setting it when connect_to_sdog() fails. Fix that. While there, return the value of connect_to_sdog() like we do elsewhere, instead of -EIO. No functional change, as connect_to_sdog() returns no other error code. Many more suspicious uses of error_report() and error_report_err() remain in other functions. Left for another day. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07sheepdog: Fix error handling in sd_snapshot_delete()Markus Armbruster
As a bdrv_snapshot_delete() method, sd_snapshot_delete() must set an error and return negative errno on failure. It sometimes returns -1, and sometimes neglects to set an error. It also prints error messages with error_report(). Fix all that. Moreover, its handling of an attempt to delete a nonexistent snapshot is wrong: it error_report()s and succeeds. Fix it to set an error and return -ENOENT instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-07sheepdog: Defuse time bomb in sd_open() error handlingMarkus Armbruster
When qemu_opts_absorb_qdict() fails, sd_open() closes stdin, because sd->fd is still zero. Fortunately, qemu_opts_absorb_qdict() can't fail, because: 1. it only fails when qemu_opt_parse() fails, and 2. the only member of runtime_opts.desc[] is a QEMU_OPT_STRING, and 3. qemu_opt_parse() can't fail for QEMU_OPT_STRING. Defuse this ticking time bomb by jumping behind the file descriptor cleanup on error. Also do that for the error paths where sd->fd is still -1. The file descriptor cleanup happens to do nothing then, but let's not rely on that here. While there, rename label out to err, because it's on the error path, not the normal path out of the function. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-02-28block: Add BDRV_O_RESIZE for blk_new_open()Kevin Wolf
blk_new_open() is a convenience function that processes flags rather than QDict options as a simple way to just open an image file. In order to keep it convenient in the future, it must automatically request the necessary permissions. This can easily be inferred from the flags for read and write, but we need another flag that tells us whether to get the resize permission. We can't just always request it because that means that no block jobs can run on the resulting BlockBackend (which is something that e.g. qemu-img commit wants to do), but we also can't request it never because most of the .bdrv_create() implementations call blk_truncate(). The solution is to introduce another flag that is passed by all users that want to resize the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-21coroutine-lock: add mutex argument to CoQueue APIsPaolo Bonzini
All that CoQueue needs in order to become thread-safe is help from an external mutex. Add this to the API. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20170213181244.16297-6-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21block: explicitly acquire aiocontext in callbacks that need itPaolo Bonzini
This covers both file descriptor callbacks and polling callbacks, since they execute related code. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-14-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-01sheepdog: reorganize check for overlapping requestsPaolo Bonzini
Wrap the code that was copied repeatedly in the two functions, sd_aio_setup and sd_aio_complete. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161129113245.32724-6-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-01sheepdog: simplify inflight_aio_head managementPaolo Bonzini
Add to the list in add_aio_request and, indirectly, resend_aioreq. Inline free_aio_req in the caller, it does not simply undo alloc_aio_req's job. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161129113245.32724-5-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-01sheepdog: do not use BlockAIOCBPaolo Bonzini
Sheepdog's AIOCB are completely internal entities for a group of requests and do not need dynamic allocation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161129113245.32724-4-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-01sheepdog: reorganize coroutine flowPaolo Bonzini
Delimit co_recv's lifetime clearly in aio_read_response. Do a simple qemu_coroutine_enter in aio_read_response, letting sd_co_writev call sd_write_done. Handle nr_pending in the same way in sd_co_rw_vector, sd_write_done and sd_co_flush_to_disk. Remove sd_co_rw_vector's return value; just leave with no pending requests. [Jeff: added missing 'return' back, spotted by Paolo after series was applied.] Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-01sheepdog: remove unused cancellation supportPaolo Bonzini
SheepdogAIOCB is internal to sheepdog.c, hence it is never canceled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161129113245.32724-2-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-01-03aio: add AioPollFn and io_poll() interfaceStefan Hajnoczi
The new AioPollFn io_poll() argument to aio_set_fd_handler() and aio_set_event_handler() is used in the next patch. Keep this code change separate due to the number of files it touches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-22block: Return -ENOTSUP rather than assert on unaligned discardsEric Blake
Right now, the block layer rounds discard requests, so that individual drivers are able to assert that discard requests will never be unaligned. But there are some ISCSI devices that track and coalesce multiple unaligned requests, turning it into an actual discard if the requests eventually cover an entire page, which implies that it is better to always pass discard requests as low down the stack as possible. In isolation, this patch has no semantic effect, since the block layer currently never passes an unaligned request through. But the block layer already has code that silently ignores drivers that return -ENOTSUP for a discard request that cannot be honored (as well as drivers that return 0 even when nothing was done). But the next patch will update the block layer to fragment discard requests, so that clients are guaranteed that they are either dealing with an unaligned head or tail, or an aligned core, making it similar to the block layer semantics of write zero fragmentation. CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-28block: only call aio_poll on the current thread's AioContextPaolo Bonzini
aio_poll is not thread safe; for example bdrv_drain can hang if the last in-flight I/O operation is completed in the I/O thread after the main thread has checked bs->in_flight. The bug remains latent as long as all of it is called within aio_context_acquire/aio_context_release, but this will change soon. To fix this, if bdrv_drain is called from outside the I/O thread, signal the main AioContext through a dummy bottom half. The event loop then only runs in the I/O thread. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477565348-5458-18-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-28sheepdog: use BDRV_POLL_WHILEPaolo Bonzini
This is important when the sheepdog driver works on a BlockDriverState that is attached to an I/O thread other than the main thread. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1477565348-5458-11-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-09-15sheepdog: remove useless castsLaurent Vivier
This patch is the result of coccinelle script scripts/coccinelle/typecast.cocci CC: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> CC: qemu-block@nongnu.org Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-07-20sheepdog: Switch .bdrv_co_discard() to byte-basedEric Blake
Another step towards killing off sector-based block APIs. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-17-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-16block: Make .bdrv_load_vmstate() vectoredKevin Wolf
This brings it in line with .bdrv_save_vmstate(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-05-12block: Allow BDRV_REQ_FUA through blk_pwrite()Eric Blake
We have several block drivers that understand BDRV_REQ_FUA, and emulate it in the block layer for the rest by a full flush. But without a way to actually request BDRV_REQ_FUA during a pass-through blk_pwrite(), FUA-aware block drivers like NBD are forced to repeat the emulation logic of a full flush regardless of whether the backend they are writing to could do it more efficiently. This patch just wires up a flags argument; followup patches will actually make use of it in the NBD driver and in qemu-io. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12block: always compile-check debug printsZhou Jie
Files with conditional debug statements should ensure that the printf is always compiled. This prevents bitrot of the format string of the debug statement. And switch debug output to stderr. Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: Always set writeback mode in blk_new_open()Kevin Wolf
All callers of blk_new_open() either don't rely on the WCE bit set after blk_new_open() because they explicitly set it anyway, or they pass BDRV_O_CACHE_WB unconditionally. This patch changes blk_new_open() so that it always enables writeback mode and asserts that BDRV_O_CACHE_WB is clear. For those callers that used to pass BDRV_O_CACHE_WB unconditionally, the flag is removed now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-17blockdev: Split monitor reference from BB creationMax Reitz
Before this patch, blk_new() automatically assigned a name to the new BlockBackend and considered it referenced by the monitor. This patch removes the implicit monitor_add_blk() call from blk_new() (and consequently the monitor_remove_blk() call from blk_delete(), too) and thus blk_new() (and related functions) no longer take a BB name argument. In fact, there is only a single point where blk_new()/blk_new_open() is called and the new BB is monitor-owned, and that is in blockdev_init(). Besides thus relieving us from having to invent names for all of the BBs we use in qemu-img, this fixes a bug where qemu cannot create a new image if there already is a monitor-owned BB named "image". If a BB and its BDS tree are created in a single operation, as of this patch the BDS tree will be created before the BB is given a name (whereas it was the other way around before). This results in minor change to the output of iotest 087, whose reference output is amended accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-16block/sheepdog: fix argument passed to qemu_strtoul()Jeff Cody
The function qemu_strtoul() reads 'unsigned long' sized data, which is larger than uint32_t on 64-bit machines. Even though the snap_id field in the header is 32-bits, we must accommodate the full size in qemu_strtoul(). This patch also adds more meaningful error handling to the qemu_strtoul() call, and subsequent results. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Message-id: e56fc50abedd9a112e0683342c8eafda063cd2f9.1456935548.git.jcody@redhat.com
2016-03-14sheepdog: Use BB functions in .bdrv_create()Kevin Wolf
All users of the block layers are supposed to go through a BlockBackend. The .bdrv_create() implementation is one such user, so this patch converts it. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-14block: Use writeback in .bdrv_create() implementationsKevin Wolf
There's no reason to use a writethrough cache mode while creating an image. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-10osdep: remove use of socket_error() from all codeDaniel P. Berrange
Now that QEMU wraps the Win32 sockets methods to automatically set errno upon failure, there is no reason for callers to use the socket_error() method. They can rely on accessing errno even on Win32. Remove all use of socket_error() from general code, leaving it as a static method in oslib-win32.c only. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-02-29sheepdog: allow to delete snapshotVasiliy Tolstov
This patch implements a blockdriver function bdrv_snapshot_delete() in the sheepdog driver. With the new function, snapshots of sheepdog can be deleted from libvirt. Cc: Jeff Cody <jcody@redhat.com> Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru> Message-id: 1450873346-22334-1-git-send-email-mitake.hitoshi@lab.ntt.co.jp Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-02-02sheepdog: Assign bs to file in sd_co_get_block_statusFam Zheng
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-9-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02block: Add "file" output parameter to block status query functionsFam Zheng
The added parameter can be used to return the BDS pointer which the valid offset is referring to. Its value should be ignored unless BDRV_BLOCK_OFFSET_VALID in ret is set. Until block drivers fill in the right value, let's clear it explicitly right before calling .bdrv_get_block_status. The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest case 102 passing, and will be fixed once all drivers return the right file pointer. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-20block: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-13error: Use error_reportf_err() where it makes obvious senseMarkus Armbruster
Done with this Coccinelle semantic patch @@ expression FMT, E, S; expression list ARGS; @@ - error_report(FMT, ARGS, error_get_pretty(E)); + error_reportf_err(E, FMT/*@@@*/, ARGS); ( - error_free(E); | exit(S); | abort(); ) followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings. We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13error: Use error_report_err() where appropriate (again)Markus Armbruster
Same Coccinelle semantic patch as in commit 565f65d. We now use the original error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I don't think the errors touched in this commit can come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-3-git-send-email-armbru@redhat.com>
2015-10-23aio: Add "is_external" flag for event handlersFam Zheng
All callers pass in false, and the real external ones will switch to true in coming patches. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-09-25sheepdog: refine discard supportHitoshi Mitake
This patch refines discard support of the sheepdog driver. The existing discard mechanism was implemented on SD_OP_DISCARD_OBJ, which was introduced before fine grained reference counting on newer sheepdog. It doesn't care about relations of snapshots and clones and discards objects unconditionally. With this patch, the driver just updates an inode object for updating reference. Removing the object is done in sheep process side. Cc: Teruaki Ishizaki <ishizaki.teruaki@lab.ntt.co.jp> Cc: Vasiliy Tolstov <v.tolstov@selfip.ru> Cc: Jeff Cody <jcody@redhat.com> Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Tested-by: Vasiliy Tolstov <v.tolstov@selfip.ru> Message-id: 1441076590-8015-3-git-send-email-mitake.hitoshi@lab.ntt.co.jp Signed-off-by: Jeff Cody <jcody@redhat.com>
2015-09-25sheepdog: use per AIOCB dirty indexes for non overlapping requestsHitoshi Mitake
In the commit 96b14ff85acf, requests for overlapping areas are serialized. However, it cannot handle a case of non overlapping requests. In such a case, min_dirty_data_idx and max_dirty_data_idx can be overwritten by the requests and invalid inode update can happen e.g. a case like create(1, 2) and create(3, 4) are issued in parallel. This patch lets SheepdogAIOCB have dirty data indexes instead of BDRVSheepdogState for avoiding the above situation. This patch also does trivial renaming for better description: overwrapping -> overlapping Cc: Teruaki Ishizaki <ishizaki.teruaki@lab.ntt.co.jp> Cc: Vasiliy Tolstov <v.tolstov@selfip.ru> Cc: Jeff Cody <jcody@redhat.com> Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Tested-by: Vasiliy Tolstov <v.tolstov@selfip.ru> Message-id: 1441076590-8015-2-git-send-email-mitake.hitoshi@lab.ntt.co.jp Signed-off-by: Jeff Cody <jcody@redhat.com>
2015-09-25sheepdog: add reopen supportLiu Yuan
With reopen supported, block-commit (and offline commit) is now supported for image files whose base image uses the Sheepdog protocol driver. Cc: qemu-devel@nongnu.org Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <liuyuan@cmss.chinamobile.com> Message-id: 1440730438-24676-1-git-send-email-namei.unix@gmail.com Signed-off-by: Jeff Cody <jcody@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-27 10:36:48 +0000