aboutsummaryrefslogtreecommitdiff
path: root/block/sheepdog.c
AgeCommit message (Collapse)Author
2013-07-15block: Don't parse protocol from file.filenameKevin Wolf
One of the major reasons for doing something new for -blockdev and blockdev-add was that the old block layer code parses filenames instead of just taking them literally. So we should really leave it untouched when it's passing using the new interfaces (like -drive file.filename=...). This allows opening relative file names that contain a colon. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-06-28block: change default of .has_zero_init to 0Peter Lieven
.has_zero_init defaults to 1 for all formats and protocols. this is a dangerous default since this means that all new added drivers need to manually overwrite it to 0 if they do not ensure that a device is zero initialized after bdrv_create(). if a driver needs to explicitly set this value to 1 its easier to verify the correctness in the review process. during review of the existing drivers it turned out that ssh and gluster had a wrong default of 1. both protocols support host_devices as backend which are not by default zero initialized. this wrong assumption will lead to possible corruption if qemu-img convert is used to write to such a backend. vpc and vmdk also defaulted to 1 altough they support fixed respectively flat extends. this has to be addresses in separate patches. both formats as well as the mentioned ssh and gluster are turned to the default of 0 with this patch for safety. a similar problem with the wrong default existed for iscsi most likely because the driver developer did oversee the default value of 1. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17sheepdog: support 'qemu-img snapshot -a'Liu Yuan
Just call sd_create_branch() in the snapshot_goto to rollback the image is good enough. With this patch, 'loadvm' process for sheepdog is modified: Suppose we have a snapshot chain A --> B --> C, we do 'loadvm A' so as to get a new chain, A --> B | V C1 in the old code: 1 reload inode of A (in snapshot_goto) 2 read vmstate via A's vdi_id (loadvm_state) 3 delete C and create C1, reload inode of C1 (sd_create_branch on write) with this patch applied: 1 reload inode of A, delete C and create C1 (in snapshot_goto) 2 read vmstate via C1's parent, that is A's vdi_id (loadvm_state) This will fix the possible bug that QEMU exit between 2 and 3 in the old code Cc: qemu-devel@nongnu.org Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17sheepdog: fix snapshot tag initializationLiu Yuan
This is an old and obvious bug. We should pass snapshot_id to the tag. Or simple command like 'qemu-img snapshot -a tag sheepdog:image' will fail Cc: qemu-devel@nongnu.org Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-26sheepdog: fix loadvm operationLiu Yuan
Currently the 'loadvm' opertaion works as following: 1. switch to the snapshot 2. mark current working VDI as a snapshot 3. rely on sd_create_branch to create a new working VDI based on the snapshot This works not the same as other format as QCOW2. For e.g, qemu > savevm # get a live snapshot snap1 qemu > savevm # snap2 qemu > loadvm 1 # This will steally create snap3 of the working VDI Which will result in following snapshot chain: base <-- snap1 <-- snap2 <-- snap3 ^ | working VDI snap3 was unnecessarily created and might be annoying users. This patch discard the unnecessary 'snap3' creation. and implement rollback(loadvm) operation to the specified snapshot by 1. switch to the snapshot 2. delete working VDI 3. rely on sd_create_branch to create a new working VDI based on the snapshot The snapshot chain for above example will be: base <-- snap1 <-- snap2 ^ | working VDI Cc: qemu-devel@nongnu.org Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: resend write requests when SD_RES_READONLY is receivedMORITA Kazutaka
When a snapshot is taken from out side of qemu (e.g. qemu-img snapshot), write requests to the current vdi return SD_RES_READONLY. In this case, the sheepdog block driver needs to update the current inode to the latest one and resend the write requests. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: add helper function to reload inodeMORITA Kazutaka
This adds a helper function to update the current inode state with the specified vdi object. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: add SD_RES_READONLY result codeMORITA Kazutaka
Sheepdog returns SD_RES_READONLY when qemu sends write requests to the snapshot vdi. This adds the result code and makes sd_strerror() print its error reason. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: cleanup find_vdi_nameMORITA Kazutaka
This makes 'filename' and 'tag' constant variables, and renames 'for_snapshot' to 'lock' to clear how it works. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: implement .bdrv_co_is_allocated()Liu Yuan
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: use BDRV_SECTOR_SIZELiu Yuan
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26sheepdog: add discard/trim support for sheepdogLiu Yuan
The 'TRIM' command from VM that is to release underlying data storage for better thin-provision is already supported by the Sheepdog. This patch adds the TRIM support at QEMU part. For older Sheepdog that doesn't support it, we return 0(success) to upper layer. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-22block: Remove filename parameter from .bdrv_file_open()Kevin Wolf
It is unused now in all block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22sheepdog: Use bdrv_open options instead of filenameKevin Wolf
This is only to convert the internal interface that is used for passing the "filename" to be parsed, but converting to actual fine grained options is left for another day, as it doesn't look trivial. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-15block: Introduce bdrv_writev_vmstateKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-02oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()Stefan Hajnoczi
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets. Rename to qemu_set_nonblock() just like qemu_set_cloexec(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-22block: Add options QDict to bdrv_file_open() prototypesKevin Wolf
The new parameter is unused yet. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-19sheepdog: show error message for halt statusLiu Yuan
Sheepdog (neither quorum nor unsafe mode) will refuse to serve IO requests when number of alive nodes is less than that of copies specified by users. This will return 0x19 to QEMU client which currently doesn't recognize it. This patch adds an error description when QEMU client receives it, other than plainly printing 'Invalid error code' Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-03-15sheepdog: set io_flush handler in do_co_reqMORITA Kazutaka
If an io_flush handler is not set, qemu_aio_wait doesn't invoke callbacks. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15sheepdog: use non-blocking fd in coroutine contextMORITA Kazutaka
Using a blocking socket in the coroutine context reduces the chance of switching to other work. This patch makes the sheepdog driver use a non-blocking fd always. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04sheepdog: add support for connecting to unix domain socketMORITA Kazutaka
This patch adds support for a unix domain socket for a connection between qemu and local sheepdog server. You can use the unix domain socket with the following syntax: $ qemu sheepdog+unix:///<vdiname>?socket=<socket path>[#snapid] Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04sheepdog: use inet_connect to simplify connect codeMORITA Kazutaka
This uses the form "<host>:<port>" for the representation of the sheepdog server to use inet_connect. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04sheepdog: accept URIsMORITA Kazutaka
The URI syntax is consistent with the NBD and Gluster syntax. The syntax is sheepdog[+tcp]://[host:port]/vdiname[#snapid|#tag] Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04move socket_set_nodelay to osdep.cMORITA Kazutaka
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01sheepdog: pass vdi_id to sheep daemon for sd_close()Liu Yuan
Sheep daemon needs vdi_id to identify which vdi is closed to release resources such as object cache. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-15sheepdog: clean up sd_aio_setup()Liu Yuan
The last two parameters of sd_aio_setup() are never used, so remove them. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-15sheepdog: multiplex the rw FD to flush cacheLiu Yuan
This will reduce sockfds connected to the sheep server to one, which simply the future hacks. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-14sheepdog: implement direct write semanticsLiu Yuan
Sheepdog supports both writeback/writethrough write but has not yet supported DIRECTIO semantics which bypass the cache completely even if Sheepdog daemon is set up with cache enabled. Suppose cache is enabled on Sheepdog daemon size, the new cache control is cache=writeback # enable the writeback semantics for write cache=writethrough # enable the emulated writethrough semantics for write cache=directsync # disable cache competely Guest WCE toggling on the run time to toggle writeback/writethrough is also supported. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-02sheepdog: pass oid directly to send_pending_req()Liu Yuan
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02sheepdog: don't update inode when create_and_write failsLiu Yuan
For the error case such as SD_RES_NO_SPACE, we shouldn't update the inode bitmap to avoid the scenario that the object is allocated but wasn't created at the server side. This will result in VM's IO error on the failed object. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-14aio: rename AIOPool to AIOCBInfoStefan Hajnoczi
Now that AIOPool no longer keeps a freelist, it isn't really a "pool" anymore. Rename it to AIOCBInfo and make it const since it no longer needs to be modified. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-12sheepdog: use bool for boolean variablesMORITA Kazutaka
This improves readability. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-05sheepdog: avoid a few buffer overrunsJim Meyering
* parse_vdiname: Use pstrcpy, not strncpy, when the destination buffer must be NUL-terminated. * sd_open: Likewise, avoid buffer overrun. * do_sd_create: Likewise. Leave the preceding memset, since pstrcpy does not NUL-fill, and filename needs that. * sd_snapshot_create: Add a comment/question. * find_vdi_name: Remove a useless memset. * sd_snapshot_goto: Remove a useless memset. Use pstrcpy to NUL-terminate, because find_vdi_name requires that its vdi arg (filename parameter) be NUL-terminated. It seems ok not to NUL-fill the buffer. Do the same for snapid: remove useless memset-0 (instead, zero tag[0]). Use pstrcpy, not strncpy. * sd_snapshot_list: Use pstrcpy, not strncpy to write into the ->name member. Each must be NUL-terminated. Acked-by: Kevin Wolf <kwolf@redhat.com> Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-24block: do not parse BDRV_O_CACHE_WB in block driversJeff Cody
Block drivers should ignore BDRV_O_CACHE_WB in .bdrv_open flags, and in the bs->open_flags. This patch removes the code, leaving the behaviour behind as if BDRV_O_CACHE_WB was set. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-12sheepdog: fix savevm and loadvmMORITA Kazutaka
This patch sets data to be sent to Sheepdog correctly and fixes savevm and loadvm operations on a Sheepdog image. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-22sheepdog: don't leak socket file descriptor upon connection failureJim Meyering
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17sheepdog: do not blindly memset all read buffersChristoph Hellwig
Only buffers that map to unallocated blocks need to be zeroed. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17sheepdog: always use coroutine-based network functionsMORITA Kazutaka
This reduces some code duplication. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09Merge remote-tracking branch 'mjt/mjt-iov2' into stagingAnthony Liguori
* mjt/mjt-iov2: rewrite iov_send_recv() and move it to iov.c cleanup qemu_co_sendv(), qemu_co_recvv() and friends export iov_send_recv() and use it in iov_send() and iov_recv() rename qemu_sendv to iov_send, change proto and move declarations to iov.h change qemu_iovec_to_buf() to match other to,from_buf functions consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent allow qemu_iovec_from_buffer() to specify offset from which to start copying consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset() rewrite iov_* functions change iov_* function prototypes to be more appropriate virtio-serial-bus: use correct lengths in control_out() message Conflicts: tests/Makefile Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-09sheepdog: traverse pending_list from the first for each timeMORITA Kazutaka
The pending list can be modified in other coroutine context sd_co_rw_vector, so we need to traverse the list from the first again after we send the pending request. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09sheepdog: split outstanding list into inflight and pendingMORITA Kazutaka
outstanding_list_head is used for both pending and inflight requests. This patch splits it and improves readability. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09sheepdog: make sure we don't free aiocb before sending all requestsMORITA Kazutaka
This patch increments the pending counter before sending requests, and make sures that aiocb is not freed while sending them. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09sheepdog: use coroutine based socket functions in coroutine contextMORITA Kazutaka
This removes blocking network I/Os in coroutine context. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09sheepdog: restart I/O when socket becomes ready in do_co_req()MORITA Kazutaka
Currently, no one reenters the yielded coroutine. This fixes it. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09sheepdog: fix dprintf format stringsMORITA Kazutaka
This fixes warnings about dprintf format in debug mode. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15sheepdog: add coroutine_fn markers to coroutine functionsMORITA Kazutaka
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-11cleanup qemu_co_sendv(), qemu_co_recvv() and friendsMichael Tokarev
The same as for non-coroutine versions in previous patches: rename arguments to be more obvious, change type of arguments from int to size_t where appropriate, and use common code for send and receive paths (with one extra argument) since these are exactly the same. Use common iov_send_recv() directly. qemu_co_sendv(), qemu_co_recvv(), and qemu_co_recv() are now trivial #define's merely adding one extra arg. qemu_co_sendv() and qemu_co_recvv() callers are converted to different argument order and extra `iov_cnt' argument. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-05-30sheepdog: fix return value of do_load_save_vm_stateMORITA Kazutaka
bdrv_save_vmstate and bdrv_load_vmstate should return the vmstate size on success, and -errno on error. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 12:20:57 +0000