aboutsummaryrefslogtreecommitdiff
path: root/block/rbd.c
AgeCommit message (Collapse)Author
2015-07-14rbd: fix ceph settings precedenceJosh Durgin
Apply the ceph settings from a config file before any ceph settings from the command line. Since the ceph config file location may be specified on the command line, parse it once to read the config file, and do a second pass to apply the rest of the command line ceph options. Signed-off-by: Josh Durgin <jdurgin@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-07-14rbd: make qemu's cache setting override any ceph settingJosh Durgin
To be safe, when cache=none is used ceph settings should not be able to override it to turn on caching. This was previously possible with rbd_cache=true in the rbd device configuration or a ceph configuration file. Similarly, rbd settings could have turned off caching when qemu requested it, although this would just be a performance problem. Fix this by changing rbd's cache setting to match qemu after all other ceph settings have been applied. Signed-off-by: Josh Durgin <jdurgin@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-07-14rbd: remove unused constants and fieldsJosh Durgin
RBDAIOCB.status was only used for cancel, which was removed in 7691e24dbebb46658e89b3f950fda6ec78bbb823. RBDAIOCB.sector_num was never used. RADOSCB.done and rcbid were never used. RBD_FD* are obsolete since the pipe was removed in e04fb07fd1676e9facd7f3f878c1bbe03bccd26b. Signed-off-by: Josh Durgin <jdurgin@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28Convert (ffs(val) - 1) to ctz32(val)Stefan Hajnoczi
This commit was generated mechanically by coccinelle from the following semantic patch: @@ expression val; @@ - (ffs(val) - 1) + ctz32(val) The call sites have been audited to ensure the ffs(0) - 1 == -1 case never occurs (due to input validation, asserts, etc). Therefore we don't need to worry about the fact that ctz32(0) == 32. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-12block/rbd: fix memory leakGonglei
Variable local_err going out of scope leaks the storage it points to. Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Amos Kong <akong@redhat.com> Message-id: 1417674851-6248-1-git-send-email-arei.gonglei@huawei.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03rbd: Add support for bdrv_invalidate_cacheAdam Crume
This fixes Ceph issue 2467: ttp://tracker.ceph.com/issues/2467 [Dropped return r in void function as suggested by Josh Durgin <josh.durgin@inktank.com>. --Stefan] Signed-off-by: Adam Crume <adamcrume@gmail.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1412880272-3154-1-git-send-email-adamcrume@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-20block: Rename BlockDriverCompletionFunc to BlockCompletionFuncMarkus Armbruster
I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Rename BlockDriverAIOCB* to BlockAIOCB*Markus Armbruster
I'll use BlockDriverAIOCB with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-22block: Rename qemu_aio_release -> qemu_aio_unrefFam Zheng
Suggested-by: Benoît Canet <benoit.canet@irqsave.net> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22rbd: Drop rbd_aiocb_info.cancelFam Zheng
And also drop the now unused "cancelled" field. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-12block: round up file size to nearest sectorHu Tao
Currently the file size requested by user is rounded down to nearest sector, causing the actual file size could be a bit less than the size user requested. Since some formats (like qcow2) record virtual disk size in bytes, this can make the last few bytes cannot be accessed. This patch fixes it by rounding up file size to nearest sector so that the actual file size is no less than the requested file size. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20block: Use g_new() & friends to avoid multiplying sizesMarkus Armbruster
g_new(T, n) is safer than g_malloc(sizeof(*v) * n) for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. Perhaps a conversion to g_malloc_n() would be neater in places, but that's merely four years old, and we can't use such newfangled stuff. This commit only touches allocations with size arguments of the form sizeof(T), plus two that use 4 instead of sizeof(uint32_t). We can make the others safe by converting to g_malloc_n() when it becomes available to us in a couple of years. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20block: Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. Patch created with Coccinelle, with two manual changes on top: * Add const to bdrv_iterate_format() to keep the types straight * Convert the allocation in bdrv_drop_intermediate(), which Coccinelle inexplicably misses Coccinelle semantic patch: @@ type T; @@ -g_malloc(sizeof(T)) +g_new(T, 1) @@ type T; @@ -g_try_malloc(sizeof(T)) +g_try_new(T, 1) @@ type T; @@ -g_malloc0(sizeof(T)) +g_new0(T, 1) @@ type T; @@ -g_try_malloc0(sizeof(T)) +g_try_new0(T, 1) @@ type T; expression n; @@ -g_malloc(sizeof(T) * (n)) +g_new(T, n) @@ type T; expression n; @@ -g_try_malloc(sizeof(T) * (n)) +g_try_new(T, n) @@ type T; expression n; @@ -g_malloc0(sizeof(T) * (n)) +g_new0(T, n) @@ type T; expression n; @@ -g_try_malloc0(sizeof(T) * (n)) +g_try_new0(T, n) @@ type T; expression p, n; @@ -g_realloc(p, sizeof(T) * (n)) +g_renew(T, p, n) @@ type T; expression p, n; @@ -g_try_realloc(p, sizeof(T) * (n)) +g_try_renew(T, p, n) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-15rbd: Handle failure for potentially large allocationsKevin Wolf
Some code in the block layer makes potentially huge allocations. Failure is not completely unexpected there, so avoid aborting qemu and handle out-of-memory situations gracefully. This patch addresses the allocations in the rbd block driver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16cleanup QEMUOptionParameterChunyan Liu
Now that all backend drivers are using QemuOpts, remove all QEMUOptionParameter related codes. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16rbd.c: replace QEMUOptionParameter with QemuOptsChunyan Liu
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-06rbd: Fix leaks in rbd_start_aio() error pathKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04rbd: use BlockDriverState's AioContextStefan Hajnoczi
Drop the assumption that we're using the main AioContext. Convert qemu_bh_new() to aio_bh_new() and qemu_aio_wait() to aio_poll(). The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces are not needed since no fd handlers, timers, or BHs stay registered when requests have been drained. Cc: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2014-05-28block/rbd: Propagate errors to open and create methodsMarkus Armbruster
Completes the conversion to Error started in commit 015a103^..d5124c0. Cc: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-22rbd: switch from pipe to QEMUBH completion notificationStefan Hajnoczi
rbd callbacks are called from non-QEMU threads. Up until now a pipe was used to signal completion back to the QEMU iothread. The pipe writer code handles EAGAIN using select(2). The select(2) API is not scalable since fd_set size is static. FD_SET() can write beyond the end of fd_set if the file descriptor number is too high. (QEMU's main loop uses poll(2) to avoid this issue with select(2).) Since the pipe itself is quite clumsy to use and QEMUBH is now thread-safe, just schedule a BH from the rbd callback function. This way we can simplify I/O completion in addition to eliminating the potential FD_SET() crash when file descriptor numbers become too high. Crash scenario: QEMU already has 1024 file descriptors open. Hotplug an rbd drive and get the pipe writer to take the select(2) code path. Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Tested-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-06qemu-option: Remove qemu_opts_create_nofailPeter Crosthwaite
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and use error_abort in call sites. null/0 arguments needs to be added for the id and fail_if_exists fields in affected callsites due to argument inconsistency between the normal and no_fail variants. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-09-25rbd: avoid qemu_rbd_snap_list() memory leaksStefan Hajnoczi
When there are no snapshots qemu_rbd_snap_list() returns 0 and the snapshot table pointer is NULL. Don't forget to free the snaps buffer we allocated for librbd rbd_snap_list(). When the function succeeds don't forget to free the snaps buffer after calling rbd_snap_list_end(). Cc: qemu-stable@nongnu.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-25block: introduce BlockDriver.bdrv_needs_filename to enable some drivers.Benoît Canet
Some drivers will have driver specifics options but no filename. This new bool allow the block layer to treat them correctly. The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and not having .bdrv_open. The first exception to this rule will be the quorum driver. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12bdrv: Use "Error" for creating imagesMax Reitz
Add an Error ** parameter to BlockDriver.bdrv_create to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12bdrv: Use "Error" for opening imagesMax Reitz
Add an Error ** parameter to BlockDriver.bdrv_open and BlockDriver.bdrv_file_open to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12snapshot: distinguish id and name in snapshot deleteWenchao Xia
Snapshot creation actually already distinguish id and name since it take a structured parameter *sn, but delete can't. Later an accurate delete is needed in qmp_transaction abort and blockdev-snapshot-delete-sync, so change its prototype. Also *errp is added to tip error, but return value is kepted to let caller check what kind of error happens. Existing caller for it are savevm, delvm and qemu-img, they are not impacted by introducing a new function bdrv_snapshot_delete_by_id_or_name(), which check the return value and do the operation again. Before this patch: For qcow2, it search id first then name to find the one to delete. For rbd, it search name. For sheepdog, it does nothing. After this patch: For qcow2, logic is the same by call it twice in caller. For rbd, it always fails in delete with id, but still search for name in second try, no change to user. Some code for *errp is based on Pavel's patch. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-19aio: drop io_flush argumentStefan Hajnoczi
The .io_flush() handler no longer exists and has no users. Drop the io_flush argument to aio_set_fd_handler() and related functions. The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no longer used and are dropped too. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-19block/rbd: drop qemu_rbd_aio_flush_cb()Stefan Hajnoczi
.io_flush() is no longer called so drop qemu_rbd_aio_flush_cb(). qemu_aio_count is unused now so drop it too. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-28block: change default of .has_zero_init to 0Peter Lieven
.has_zero_init defaults to 1 for all formats and protocols. this is a dangerous default since this means that all new added drivers need to manually overwrite it to 0 if they do not ensure that a device is zero initialized after bdrv_create(). if a driver needs to explicitly set this value to 1 its easier to verify the correctness in the review process. during review of the existing drivers it turned out that ssh and gluster had a wrong default of 1. both protocols support host_devices as backend which are not by default zero initialized. this wrong assumption will lead to possible corruption if qemu-img convert is used to write to such a backend. vpc and vmdk also defaulted to 1 altough they support fixed respectively flat extends. this has to be addresses in separate patches. both formats as well as the mentioned ssh and gluster are turned to the default of 0 with this patch for safety. a similar problem with the wrong default existed for iscsi most likely because the driver developer did oversee the default value of 1. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-26rbd: Fix use after free in rbd_open()Kevin Wolf
Commit a9ccedc3 frees the QemuOpts for the driver-specific options immediately, even though it still needs the filename string that is contained there. This doesn't work. Move the deletion of the QemuOpts to the end of the function where its content isn't needed any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-22block: Remove filename parameter from .bdrv_file_open()Kevin Wolf
It is unused now in all block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22rbd: Use bdrv_open options instead of filenameKevin Wolf
This is only to convert the internal interface that is used for passing the "filename" to be parsed, but converting to actual fine grained options is left for another day, as it doesn't look trivial. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-15rbd: add an asynchronous flushJosh Durgin
The existing bdrv_co_flush_to_disk implementation uses rbd_flush(), which is sychronous and causes the main qemu thread to block until it is complete. This results in unresponsiveness and extra latency for the guest. Fix this by using an asynchronous version of flush. This was added to librbd with a special #define to indicate its presence, since it will be backported to stable versions. Thus, there is no need to check the version of librbd. Implement this as bdrv_aio_flush, since it matches other aio functions in the rbd block driver, and leave out bdrv_co_flush_to_disk when the asynchronous version is available. Reported-by: Oliver Francke <oliver@filoo.de> Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25rbd: fix compile errorLiu Yuan
Commit 787e4a85 [block: Add options QDict to bdrv_file_open() prototypes] didn't update rbd.c accordingly. Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-11rbd: Fix race between aio completition and aio cancelStefan Priebe
This one fixes a race which qemu had also in iscsi block driver between cancellation and io completition. qemu_rbd_aio_cancel was not synchronously waiting for the end of the command. To archieve this it introduces a new status flag which uses -EINPROGRESS. Signed-off-by: Stefan Priebe <s.priebe@profihost.ag> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-21use int64_t for return values from rbd instead of intStefan Priebe
rbd / rados tends to return pretty often length of writes or discarded blocks. These values might be bigger than int. The steps to reproduce are: mkfs.xfs -f a whole device bigger than int in bytes. mkfs.xfs sends a discard. Important is that you use scsi-hd and set discard_granularity=512. Otherwise rbd disabled discard support. Signed-off-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-14aio: rename AIOPool to AIOCBInfoStefan Hajnoczi
Now that AIOPool no longer keeps a freelist, it isn't really a "pool" anymore. Rename it to AIOCBInfo and make it const since it no longer needs to be modified. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-24block: do not parse BDRV_O_CACHE_WB in block driversJeff Cody
Block drivers should ignore BDRV_O_CACHE_WB in .bdrv_open flags, and in the bs->open_flags. This patch removes the code, leaving the behaviour behind as if BDRV_O_CACHE_WB was set. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09Merge remote-tracking branch 'mjt/mjt-iov2' into stagingAnthony Liguori
* mjt/mjt-iov2: rewrite iov_send_recv() and move it to iov.c cleanup qemu_co_sendv(), qemu_co_recvv() and friends export iov_send_recv() and use it in iov_send() and iov_recv() rename qemu_sendv to iov_send, change proto and move declarations to iov.h change qemu_iovec_to_buf() to match other to,from_buf functions consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent allow qemu_iovec_from_buffer() to specify offset from which to start copying consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset() rewrite iov_* functions change iov_* function prototypes to be more appropriate virtio-serial-bus: use correct lengths in control_out() message Conflicts: tests/Makefile Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-15rbd: hook up cache optionsJosh Durgin
Writeback caching was added in Ceph 0.46, and writethrough will be in 0.47. These are controlled by general config options, so there's no need to check for librbd version. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-11change qemu_iovec_to_buf() to match other to,from_buf functionsMichael Tokarev
It now allows specifying offset within qiov to start from and amount of bytes to copy. Actual implementation is just a call to iov_to_buf(). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-11allow qemu_iovec_from_buffer() to specify offset from which to start copyingMichael Tokarev
Similar to qemu_iovec_memset(QEMUIOVector *qiov, size_t offset, int c, size_t bytes); the new prototype is: qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset, const void *buf, size_t bytes); The processing starts at offset bytes within qiov. This way, we may copy a bounce buffer directly to a middle of qiov. This is exactly the same function as iov_from_buf() from iov.c, so use the existing implementation and rename it to qemu_iovec_from_buf() to be shorter and to match the utility function. As with utility implementation, we now assert that the offset is inside actual iovec. Nothing changed for current callers, because `offset' parameter is new. While at it, stop using "bounce-qiov" in block/qcow2.c and copy decrypted data directly from cluster_data instead of recreating a temp qiov for doing that. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-05-02rbd: add discard supportJosh Durgin
Change the write flag to an operation type in RBDAIOCB, and make the buffer optional since discard doesn't use it. Discard is first included in librbd 0.1.2 (which is in Ceph 0.46). If librbd is too old, leave out qemu_rbd_aio_discard entirely, so the old behavior is preserved. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-19aio: remove process_queue callback and qemu_aio_process_queuePaolo Bonzini
Both unused after the previous patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26rbd: wire up snapshot removal and rollback functionalityGregory Farnum
Signed-off-by: Greg Farnum <gregory.farnum@dreamhost.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-13prepare for future GPLv2+ relicensingPaolo Bonzini
All files under GPLv2 will get GPLv2+ changes starting tomorrow. event_notifier.c and exec-obsolete.h were only ever touched by Red Hat employees and can be relicensed now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-15rbd: always set out parameter in qemu_rbd_snap_listJosh Durgin
The caller expects psn_tab to be NULL when there are no snapshots or an error occurs. This results in calling g_free on an invalid address. Reported-by: Oliver Francke <Oliver@filoo.de> Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 00:18:20 +0000