| Age | Commit message (Collapse) | Author |
|---|
|
When updating an L1 entry the qcow2 driver writes a (512-byte) sector
worth of data to avoid a read-modify-write cycle. Instead of always
writing 512 bytes we should follow the alignment requirements of the
storage backend.
(the only exception is when the alignment is larger than the cluster
size because then we could be overwriting data after the L1 table)
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 71f34d4ae4b367b32fb36134acbf4f4f7ee681f4.1579374329.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The L1 table is read from disk using the byte-based bdrv_pread() and
is never accessed beyond its last element, so there's no need to
allocate more memory than that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: b2e27214ec7b03a585931bcf383ee1ac3a641a10.1579374329.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The standard cluster descriptor in L2 table entries has a field to
store the host cluster offset. When we need to get that offset from an
entry we use L2E_OFFSET_MASK to ensure that we only use the bits that
belong to that field.
But while that mask is used every time we read from an L2 entry, it
is never used when we write to it. Due to the QCOW_MAX_CLUSTER_OFFSET
limit set in the cluster allocation code QEMU can never produce
offsets that don't fit in that field so any such offset would indicate
a bug in QEMU.
Compressed cluster descriptors contain two fields (host cluster offset
and size of the compressed data) and the situation with them is
similar. In this case the masks are not constant but are stored in the
csize_mask and cluster_offset_mask fields of BDRVQcow2State.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200113161146.20099-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
When the COW areas are included, the size of an allocation can exceed
INT_MAX. This is kind of limited by handle_alloc() in that it already
caps avail_bytes at INT_MAX, but the number of clusters still reflects
the original length.
This can have all sorts of effects, ranging from the storage layer write
call failing to image corruption. (If there were no image corruption,
then I suppose there would be data loss because the .cow_end area is
forced to be empty, even though there might be something we need to
COW.)
Fix all of it by limiting nb_clusters so the equivalent number of bytes
will not exceed INT_MAX.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
* Change the qcow2_co_{encrypt|decrypt} to just receive full host and
guest offsets and use this function directly instead of calling
do_perform_cow_encrypt (which is removed by that patch).
* Adjust qcow2_co_encdec to take full host and guest offsets as well.
* Document the qcow2_co_{encrypt|decrypt} arguments
to prevent the bug fixed in former commit from hopefully
happening again.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20190915203655.21638-3-mlevitsk@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[mreitz: Let perform_cow() return the error value returned by
qcow2_co_encrypt(), as proposed by Vladimir]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This fixes subtle corruption introduced by luks threaded encryption
in commit 8ac0f15f335
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1745922
The corruption happens when we do a write that
* writes to two or more unallocated clusters at once
* doesn't fully cover the first sector
* doesn't fully cover the last sector
* uses luks encryption
In this case, when allocating the new clusters we COW both areas
prior to the write and after the write, and we encrypt them.
The above mentioned commit accidentally made it so we encrypt the
second COW area using the physical cluster offset of the first area.
The problem is that offset_in_cluster in do_perform_cow_encrypt
can be larger that the cluster size, thus cluster_offset
will no longer point to the start of the cluster at which encrypted
area starts.
Next patch in this series will refactor the code to avoid all these
assumptions.
In the bugreport that was triggered by rebasing a luks image to new,
zero filled base, which lot of such writes, and causes some files
with zero areas to contain garbage there instead.
But as described above it can happen elsewhere as well
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190915203655.21638-2-mlevitsk@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Replace instances of:
(n & (BDRV_SECTOR_SIZE - 1)) == 0
And:
(n & ~BDRV_SECTOR_MASK) == 0
With:
QEMU_IS_ALIGNED(n, BDRV_SECTOR_SIZE)
Which reveals the intent of the code better, and makes it easier to
locate the code checking alignment.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827185913.27427-2-nsoffer@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
handle_alloc() tries to find as many contiguous clusters that need
copy-on-write as possible in order to allocate all of them at the same
time.
However, compressed clusters are only overwritten one by one, so let's
say that we have an image with 1024 consecutive compressed clusters:
qemu-img create -f qcow2 hd.qcow2 64M
for f in `seq 0 64 65472`; do
qemu-io -c "write -c ${f}k 64k" hd.qcow2
done
In this case trying to overwrite the whole image with one large write
request results in 1024 separate allocations:
qemu-io -c "write 0 64M" hd.qcow2
This restriction comes from commit 095a9c58ce12afeeb90c2 from 2008.
Nowadays QEMU can overwrite multiple compressed clusters just fine,
and in fact it already does: as long as the first cluster that
handle_alloc() finds is not compressed, all other compressed clusters
in the same batch will be overwritten in one go:
qemu-img create -f qcow2 hd.qcow2 64M
qemu-io -c "write -z 0 64k" hd.qcow2
for f in `seq 64 64 65472`; do
qemu-io -c "write -c ${f}k 64k" hd.qcow2
done
Compared to the previous one, overwriting this image on my computer
goes from 8.35s down to 230ms.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: John Snow <jsnow@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Implement and use new interface to get rid of hd_qiov.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-13-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-13-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Implement and use new interface to get rid of hd_qiov.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-12-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-12-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
|
|
If COW areas of the newly allocated clusters are zeroes on the backing
image, efficient bdrv_write_zeroes(flags=BDRV_REQ_NO_FALLBACK) can be
used on the whole cluster instead of writing explicit zero buffers later
in perform_cow().
iotest 060:
write to the discarded cluster does not trigger COW anymore.
Use a backing image instead.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20190516142749.81019-2-anton.nefedov@virtuozzo.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Do encryption/decryption in threads, like it is already done for
compression. This improves asynchronous encrypted io.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-9-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
qcow2.h depends on block_int.h. Compilation isn't broken currently only
due to block_int.h always included before qcow2.h. Though, it seems
better to directly include block_int.h in qcow2.h.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
When an L2 table entry points to a compressed cluster the space used
by the data is specified in 512-byte sectors. This size is independent
from BDRV_SECTOR_SIZE and is specific to the qcow2 file format.
The QCOW2_COMPRESSED_SECTOR_SIZE constant defined in this patch makes
this explicit.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Provide an option to force QEMU to always keep the external data file
consistent as a standalone read-only raw image.
At the moment, this means making sure that write_zeroes requests are
forwarded to the data file instead of just updating the metadata, and
checking that no backing file is used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This changes the qcow2 implementation to direct all guest data I/O to
s->data_file rather than bs->file, while metadata I/O still uses
bs->file. At the moment, this is still always the same, but soon we'll
add options to set s->data_file to an external data file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qcow2_alloc_compressed_cluster_offset() used to return the cluster
offset for success and 0 for error. This doesn't only conflict with 0 as
a valid host offset, but also loses the error code.
Similar to the change made to qcow2_alloc_cluster_offset() for
uncompressed clusters in commit 148da7ea9d6, make the function return
0/-errno and return the allocated cluster offset in a by-reference
parameter.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The cluster allocation code uses 0 as an invalid offset that is used in
case of errors or as "offset not yet determined". With external data
files, a host cluster offset of 0 becomes valid, though.
Define a constant INV_OFFSET (which is not cluster aligned and will
therefore never be a valid offset) that can be used for such purposes.
This removes the additional host_offset == 0 check that commit
ff52aab2df5 introduced; the confusion between an invalid offset and
(erroneous) allocation at offset 0 is removed with this change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Offset 0 can be valid for normal (allocated) clusters now, so use
qcow2_get_cluster_type() instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
L1 table entries have a field to store the offset of an L2 table.
The rest of the bits of the entry are currently reserved except from
bit 63, which stores the COPIED flag.
The offset is always taken from the entry using L1E_OFFSET_MASK to
ensure that we only use the bits that belong to that field.
While that mask is used every time we read from the L1 table, it is
never used when we write to it. Due to the limits set elsewhere in the
code QEMU can never produce L2 table offsets that don't fit in that
field so any such offset when allocating an L2 table would indicate a
bug in QEMU.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Compression is done in threads in qcow2.c. We want to do decompression
in the same way, so, firstly, move it to the same file.
The only change is braces around if-body in decompress_buffer, to
satisfy checkpatch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If we managed to allocate the clusters, but then failed to write the
data, there's a good chance that we'll still be able to free the
clusters again in order to avoid cluster leaks (the refcounts are
cached, so even if we can't write them out right now, we may be able to
do so when the VM is resumed after a werror=stop/enospc pause).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
|
|
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This function iterates over all snapshots of a qcow2 file in order to
expand all zero clusters, but it does not validate the snapshots' L1
tables first.
We now have a function to take care of this, so let's use it.
We can also take the opportunity to replace the sector-based
bdrv_read() with bdrv_pread().
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The align_offset() function is equivalent to the ROUND_UP() macro so
there's no need to use the former. The ROUND_UP() name is also a bit
more explicit.
This patch uses ROUND_UP() instead of the slower QEMU_ALIGN_UP()
because align_offset() already requires that the second parameter is a
power of two.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180215131008.5153-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This function doesn't need any changes to support L2 slices, but since
it's now dealing with slices intead of full tables, the l2_table
variable is renamed for clarity.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 6107001fc79e6739242f1de7d191375e4f130aac.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This function doesn't need any changes to support L2 slices, but since
it's now dealing with slices instead of full tables, the l2_table
variable is renamed for clarity.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 78bcc54bc632574dd0b900a77a00a1b6ffc359e6.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This function doesn't need any changes to support L2 slices, but since
it's now dealing with slices intead of full tables, the l2_table
variable is renamed for clarity.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 812b0c3505bb1687e51285dccf1a94f0cecb1f74.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This function doesn't need any changes to support L2 slices, but since
it's now dealing with slices instead of full tables, the l2_table
variable is renamed for clarity.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 0c5d4b9bf163aa3b49ec19cc512a50d83563f2ad.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
expand_zero_clusters_in_l1() expands zero clusters as a necessary step
to downgrade qcow2 images to a version that doesn't support metadata
zero clusters. This function takes an L1 table (which may or may not
be active) and iterates over all its L2 tables looking for zero
clusters.
Since we'll be loading L2 slices instead of full tables we need to add
an extra loop that iterates over all slices of each L2 table, and we
should also use the slice size when allocating the buffer used when
the L1 table is not active.
This function doesn't need any additional changes so apart from that
this patch simply updates the variable name from l2_table to l2_slice.
Finally, and since we have to touch the bdrv_read() / bdrv_write()
calls anyway, this patch takes the opportunity to replace them with
the byte-based bdrv_pread() / bdrv_pwrite().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 43590976f730501688096cff103f2923b72b0f32.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Adding support for L2 slices to expand_zero_clusters_in_l1() needs
(among other things) an extra loop that iterates over all slices of
each L2 table.
Putting all changes in one patch would make it hard to read because
all semantic changes would be mixed with pure indentation changes.
To make things easier this patch simply creates a new block and
changes the indentation of all lines of code inside it. Thus, all
modifications in this patch are cosmetic. There are no semantic
changes and no variables are renamed yet. The next patch will take
care of that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: c2ae9f31ed5b6e591477ad4654448badd1c89d73.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
At the moment it doesn't really make a difference whether we call
qcow2_get_refcount() before of after reading the L2 table, but if we
want to support L2 slices we'll need to read the refcount first.
This patch simply changes the order of those two operations to prepare
for that. The patch with the actual semantic changes will be easier to
read because of this.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 947a91d934053a2dbfef979aeb9568f57ef57c5d.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
zero_single_l2() limits the number of clusters to be zeroed to the
amount that fits inside an L2 table. Since we'll be loading L2 slices
instead of full tables we need to update that limit. The function is
renamed to zero_in_l2_slice() for clarity.
Apart from that, this function doesn't need any additional changes, so
this patch simply updates the variable name from l2_table to l2_slice.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: ebc16e7e79fa6969d8975ef487d679794de4fbcc.1517840877.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
discard_single_l2() limits the number of clusters to be discarded
to the amount that fits inside an L2 table. Since we'll be loading
L2 slices instead of full tables we need to update that limit. The
function is renamed to discard_in_l2_slice() for clarity.
Apart from that, this function doesn't need any additional changes, so
this patch simply updates the variable name from l2_table to l2_slice.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1cb44a5b68be5334cb01b97a3db3a3c5a43396e5.1517840877.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
handle_alloc() loads an L2 table and limits the number of checked
clusters to the amount that fits inside that table. Since we'll be
loading L2 slices instead of full tables we need to update that limit.
Apart from that, this function doesn't need any additional changes, so
this patch simply updates the variable name from l2_table to l2_slice.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: b243299c7136f7014c5af51665431ddbf5e99afd.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
handle_copied() loads an L2 table and limits the number of checked
clusters to the amount that fits inside that table. Since we'll be
loading L2 slices instead of full tables we need to update that limit.
Apart from that, this function doesn't need any additional changes, so
this patch simply updates the variable name from l2_table to l2_slice.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 541ac001a7d6b86bab2392554bee53c2b312148c.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
There's a loop in this function that iterates over the L2 entries in a
table, so now we need to assert that it remains within the limits of
an L2 slice.
Apart from that, this function doesn't need any additional changes, so
this patch simply updates the variable name from l2_table to l2_slice.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: f9846a1c2efc51938e877e2a25852d9ab14797ff.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
qcow2_get_cluster_offset() checks how many contiguous bytes are
available at a given offset. The returned number of bytes is limited
by the amount that can be addressed without having to load more than
one L2 table.
Since we'll be loading L2 slices instead of full tables this patch
changes the limit accordingly using the size of the L2 slice for the
calculations instead of the full table size.
One consequence of this is that with small L2 slices operations such
as 'qemu-img map' will need to iterate in more steps because each
qcow2_get_cluster_offset() call will potentially return a smaller
number. However the code is already prepared for that so this doesn't
break semantics.
The l2_table variable is also renamed to l2_slice to reflect this, and
offset_to_l2_index() is replaced with offset_to_l2_slice_index().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 6b602260acb33da56ed6af9611731cb7acd110eb.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This patch updates get_cluster_table() to return L2 slices instead of
full L2 tables.
The code itself needs almost no changes, it only needs to call
offset_to_l2_slice_index() instead of offset_to_l2_index(). This patch
also renames all the relevant variables and the documentation.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 64cf064c0021ba315d3f3032da0f95db1b615f33.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
After the previous patch we're now always using l2_load() in
get_cluster_table() regardless of whether a new L2 table has to be
allocated or not.
This patch refactors that part of the code to use one single l2_load()
call.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: ce31758c4a1fadccea7a6ccb93951eb01d95fd4c.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This patch updates l2_allocate() to support the qcow2 cache returning
L2 slices instead of full L2 tables.
The old code simply gets an L2 table from the cache and initializes it
with zeroes or with the contents of an existing table. With a cache
that returns slices instead of tables the idea remains the same, but
the code must now iterate over all the slices that are contained in an
L2 table.
Since now we're operating with slices the function can no longer
return the newly-allocated table, so it's up to the caller to retrieve
the appropriate L2 slice after calling l2_allocate() (note that with
this patch the caller is still loading full L2 tables, but we'll deal
with that in a separate patch).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20fc0415bf0e011e29f6487ec86eb06a11f37445.1517840877.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Adding support for L2 slices to l2_allocate() needs (among other
things) an extra loop that iterates over all slices of a new L2 table.
Putting all changes in one patch would make it hard to read because
all semantic changes would be mixed with pure indentation changes.
To make things easier this patch simply creates a new block and
changes the indentation of all lines of code inside it. Thus, all
modifications in this patch are cosmetic. There are no semantic
changes and no variables are renamed yet. The next patch will take
care of that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: d0d7dca8520db304524f52f49d8157595a707a35.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Each entry in the qcow2 L2 cache stores a full L2 table (which uses a
complete cluster in the qcow2 image). A cluster is usually too large
to be used efficiently as the size for a cache entry, so we want to
decouple both values by allowing smaller cache entries. Therefore the
qcow2 L2 cache will no longer return full L2 tables but slices
instead.
This patch updates l2_load() so it can handle L2 slices correctly.
Apart from the offset of the L2 table (which we already had) we also
need the guest offset in order to calculate which one of the slices
we need.
An L2 slice has currently the same size as an L2 table (one cluster),
so for now this function will load exactly the same data as before.
This patch also removes a stale comment about the return value being
a pointer to the L2 table. This function returns an error code since
55c17e9821c474d5fcdebdc82ed2fc096777d611.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: b830aa1fc5b6f8e3cb331d006853fe22facca847.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Similar to offset_to_l2_index(), this function returns the index in
the L1 table for a given guest offset. This is only used in a couple
of places and it's not a particularly complex calculation, but it
makes the code a bit more readable.
Although in the qcow2_get_cluster_offset() case the old code was
taking advantage of the l1_bits variable, we're going to get rid of
the other uses of l1_bits in a later patch anyway, so it doesn't make
sense to keep it just for this.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: a5f626fed526b7459a0425fad06d823d18df8522.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This function was only using the BlockDriverState parameter to pass it
to qcow2_cache_get_table_idx(). This is no longer necessary so this
parameter can be removed.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 6f98155489054a457563da77cdad1a66ebb3e896.1517840876.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This function was only using the BlockDriverState parameter to pass it
to qcow2_cache_get_table_idx(). This is no longer necessary so this
parameter can be removed.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 5c40516a91782b083c1428b7b6a41bb9e2679bfb.1517840876.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This function has not been returning the offset of the L2 table since
commit 3948d1d4876065160583e79533bf604481063833
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: b498733b6706a859a03678d74ecbd26aeba129aa.1517840876.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
