aboutsummaryrefslogtreecommitdiff
path: root/block/qcow.c
AgeCommit message (Collapse)Author
2013-06-28block: change default of .has_zero_init to 0Peter Lieven
.has_zero_init defaults to 1 for all formats and protocols. this is a dangerous default since this means that all new added drivers need to manually overwrite it to 0 if they do not ensure that a device is zero initialized after bdrv_create(). if a driver needs to explicitly set this value to 1 its easier to verify the correctness in the review process. during review of the existing drivers it turned out that ssh and gluster had a wrong default of 1. both protocols support host_devices as backend which are not by default zero initialized. this wrong assumption will lead to possible corruption if qemu-img convert is used to write to such a backend. vpc and vmdk also defaulted to 1 altough they support fixed respectively flat extends. this has to be addresses in separate patches. both formats as well as the mentioned ssh and gluster are turned to the default of 0 with this patch for safety. a similar problem with the wrong default existed for iscsi most likely because the driver developer did oversee the default value of 1. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-22qcow: allow sub-cluster compressed write to last clusterStefan Hajnoczi
Compression in qcow requires image length to be a multiple of the cluster size. Lift this requirement by zero-padding the final cluster when necessary. The virtual disk size is still not cluster-aligned, so the guest cannot access the zero sectors. Note that this is almost identical to the qcow2 version of this code. qcow2's compression code is drawn from qcow. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-13aes: move aes.h from include/block to include/qemuAurelien Jarno
Move aes.h from include/block to include/qemu to show it can be reused by other subsystems. Cc: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-22block: Add options QDict to bdrv_file_open() prototypesKevin Wolf
The new parameter is unused yet. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-15block: Add options QDict to .bdrv_open()Kevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-25block: Use error code EMEDIUMTYPE for wrong format in some block driversStefan Weil
This improves error reports for bochs, cow, qcow, qcow2, qed and vmdk when a file with the wrong format is selected. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-24block: qcow image file reopenJeff Cody
These are the stubs for the file reopen drivers for the qcow format. There is currently nothing that needs to be done by the qcow driver in reopen. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-11change qemu_iovec_to_buf() to match other to,from_buf functionsMichael Tokarev
It now allows specifying offset within qiov to start from and amount of bytes to copy. Actual implementation is just a call to iov_to_buf(). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-11allow qemu_iovec_from_buffer() to specify offset from which to start copyingMichael Tokarev
Similar to qemu_iovec_memset(QEMUIOVector *qiov, size_t offset, int c, size_t bytes); the new prototype is: qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset, const void *buf, size_t bytes); The processing starts at offset bytes within qiov. This way, we may copy a bounce buffer directly to a middle of qiov. This is exactly the same function as iov_from_buf() from iov.c, so use the existing implementation and rename it to qemu_iovec_from_buf() to be shorter and to match the utility function. As with utility implementation, we now assert that the offset is inside actual iovec. Nothing changed for current callers, because `offset' parameter is new. While at it, stop using "bounce-qiov" in block/qcow2.c and copy decrypted data directly from cluster_data instead of recreating a temp qiov for doing that. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-04-05block: push recursive flushing up from driversPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qcow: Use bdrv functions to replace file operationLi Zhi Hui
Since common file operation functions lack of error detection and use much more I/O syscalls, so change them to bdrv series functions and reduce I/O request. Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qcow: Return real error code in qcow_openLi Zhi Hui
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: convert qcow2, qcow2, and vmdk to .bdrv_co_is_allocated()Stefan Hajnoczi
The qcow2, qcow, and vmdk block drivers are based on coroutines. They have a coroutine mutex which protects internal state. We can convert the .bdrv_is_allocated() function to .bdrv_co_is_allocated() by holding the mutex around the cluster lookup operation. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: Add coroutine_fn marker to coroutine functionsDong Xu Wang
Looks better when reviewing these source files. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-23qcow: Add migration blockerKevin Wolf
qcow caches L2 tables. For migration to work, they would have to be invalidated. Block migration for now. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-11block: Rename bdrv_co_flush to bdrv_co_flush_to_diskKevin Wolf
There are two different types of flush that you can do: Flushing one level up to the OS (i.e. writing data to the host page cache) or flushing it all the way down to the disk. The existing functions flush to the disk, reflect this in the function name. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28qcow: Fix bdrv_write_compressed error handlingKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2011-10-21block: change flush to co_flushPaolo Bonzini
Since coroutine operation is now mandatory, convert all bdrv_flush implementations to coroutines. For qcow2, this means taking the lock. Other implementations are simpler and just forward bdrv_flush to the underlying protocol, so they can avoid the lock. The bdrv_flush callback is then unused and can be eliminated. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: drop redundant bdrv_flush implementationStefan Hajnoczi
Block drivers now only need to provide either of .bdrv_co_flush, .bdrv_aio_flush() or for legacy drivers .bdrv_flush(). Remove the redundant .bdrv_flush() implementations. [Paolo Bonzini: change raw driver to bdrv_co_flush] Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-14block/qcow: Fix use of free() instead of g_free()Stefan Weil
cppcheck reported this error: qemu/block/qcow.c:599: error: Mismatching allocation and deallocation: cluster_data Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-23qcow: remove old #undefined codeFrediano Ziglio
Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23qcow: Remove QCowAIOCBFrediano Ziglio
Embed qcow_aio_read_cb into qcow_co_readv and qcow_aio_write_cb into qcow_co_writev Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23qcow: move some blocks of code to avoid useless variable initializationFrediano Ziglio
Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23qcow: QCowAIOCB field cleanupFrediano Ziglio
remove unused field from this structure and put some of them in qcow_aio_read_cb and qcow_aio_write_cb Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23qcow/qcow2: Allocate QCowAIOCB structure using stackFrediano Ziglio
instead of calling qemi_aio_get use stack Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23qcow: initialize coroutine mutexScott Wood
commit 52b8eb60132b27ad53476490e9d7579003390cfa added a mutex, but never initialized it. This caused a segfault. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-02qcow: Use coroutinesKevin Wolf
The old qcow format is another user of the AsyncContext infrastructure. Converting it to coroutines (and therefore CoMutexes) allows to remove AsyncContexts. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-14qcow: Avoid direct AIO callbackKevin Wolf
bdrv_aio_* must not call the callback before returning to its caller. In qcow, this could happen in some error cases. This starts the real requests processing in a BH to avoid this situation. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-03-15block/qcow: Don't ignore immediate read/write and other failuresStefan Weil
This patch is similar to 171e3d6b9997c98a97d0c525867f7cd9b640cadd which fixed qcow2: Returning -EIO is far from optimal, but at least it's an error code. In addition to read/write failures, -EIO is also returned when decompress_cluster failed. Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-24block: Remove unused s->hd in various driversKevin Wolf
All drivers use bs->file instead of s->hd for quite a while now, so it's time to remove s->hd. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-04block: Allow bdrv_flush to return errorsKevin Wolf
This changes bdrv_flush to return 0 on success and -errno in case of failure. It's a requirement for implementing proper error handle in users of bdrv_flush. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-06-22qcow: Use bdrv_(p)write_sync for metadata writesKevin Wolf
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17block: Avoid unchecked casts for AIOCBsKevin Wolf
Use container_of for one direction and &acb->common for the other one. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-03block: Open the underlying image file in generic codeKevin Wolf
Format drivers shouldn't need to bother with things like file names, but rather just get an open BlockDriverState for the underlying protocol. This patch introduces this behaviour for bdrv_open implementation. For protocols which need to access the filename to open their file/device/connection/... a new callback bdrv_file_open is introduced which doesn't get an underlying file opened. For now, also some of the more obscure formats use bdrv_file_open because they open() the file themselves instead of using the block.c functions. They need to be fixed in later patches. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-03-09qcow: return errno instead of -1Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26block/qcow.c: fix warnings with _FORTIFY_SOURCEKirill A. Shutemov
CC block/qcow.o cc1: warnings being treated as errors block/qcow.c: In function 'qcow_create': block/qcow.c:804: error: ignoring return value of 'write', declared with attribute warn_unused_result block/qcow.c:806: error: ignoring return value of 'write', declared with attribute warn_unused_result block/qcow.c:811: error: ignoring return value of 'write', declared with attribute warn_unused_result make: *** [block/qcow.o] Error 1 Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13qcow/qcow2: implement bdrv_aio_flushKevin Wolf
Now that we do not have to flush the backing device anymore implementing the bdrv_aio_flush method for image formats is trivial. [hch: forward ported to qemu mainline from a product tree] Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10qcow1: Fix qcow_aio_writevKevin Wolf
Pass is_write = 1 to qcow_aio_setup when writing. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-06qemu-img: Print available options with -o ?Kevin Wolf
This patch adds a small help text to each of the options in the block drivers which can be displayed by using qemu-img create -f fmt -o ? Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2009-05-27fully split aio_pool from BlockDriverChristoph Hellwig
Now that we have a separate aio pool structure we can remove those aio pool details from BlockDriver. Every driver supporting AIO now needs to declare a static AIOPool with the aiocb size and the cancellation method. This cleans up the current code considerably and will make it cleaner and more obvious to support two different aio implementations behind a single BlockDriver. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27qcow: add qcow_aio_setup helperChristoph Hellwig
[this one is required for [PATCH] fully split aio_pool from BlockDriver, sorry for not sending it out earlier] Add a qcow_aio_setup helper to qcow to shared common code between the aio_readv and aio_writev methods. Based on the function with the same name in qcow2. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27qcow/qcow2: Drop synchronous qcow_write()Kevin Wolf
There is only one (internal) user left and it can be switched to the normal emulation provided in block.c Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22Convert all block drivers to new bdrv_createKevin Wolf
Now we can make use of the newly introduced option structures. Instead of having bdrv_create carry more and more parameters (which are format specific in most cases), just pass a option structure as defined by the driver itself. bdrv_create2() contains an emulation of the old interface to simplify the transition. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14Move block drivers into their own directoryAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 18:45:08 +0000