aboutsummaryrefslogtreecommitdiff
path: root/block/qcow.c
AgeCommit message (Collapse)Author
2015-07-08block: convert qcow/qcow2 to use generic cipher APIDaniel P. Berrange
Switch the qcow/qcow2 block driver over to use the generic cipher API, this allows it to use the pluggable AES implementations, instead of being hardcoded to use QEMU's built-in impl. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-10-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07crypto: move built-in AES implementation into crypto/Daniel P. Berrange
To prepare for a generic internal cipher API, move the built-in AES implementation into the crypto/ directory Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-22qcow2/qcow: protect against uninitialized encryption keyDaniel P. Berrange
When a qcow[2] file is opened, if the header reports an encryption method, this is used to set the 'crypt_method_header' field on the BDRVQcow[2]State struct, and the 'encrypted' flag in the BDRVState struct. When doing I/O operations, the 'crypt_method' field on the BDRVQcow[2]State struct is checked to determine if encryption needs to be applied. The crypt_method_header value is copied into crypt_method when the bdrv_set_key() method is called. The QEMU code which opens a block device is expected to always do a check if (bdrv_is_encrypted(bs)) { bdrv_set_key(bs, ....key...); } If code forgets to do this, then 'crypt_method' is never set and so when I/O is performed, QEMU writes plain text data into a sector which is expected to contain cipher text, or when reading, will return cipher text instead of plain text. Change the qcow[2] code to consult bs->encrypted when deciding whether encryption is required, and assert(s->crypt_method) to protect against cases where the caller forgets to set the encryption key. Also put an assert in the set_key methods to protect against the case where the caller sets an encryption key on a block device that does not have encryption Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28block: use bdrv_get_device_or_node_name() in error messagesAlberto Garcia
There are several error messages that identify a BlockDriverState by its device name. However those errors can be produced in nodes that don't have a device name associated. In those cases we should use bdrv_get_device_or_node_name() to fall back to the node name and produce a more meaningful message. The messages are also updated to use the more generic term 'node' instead of 'device'. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 9823a1f0514fdb0692e92868661c38a9e00a12d6.1428485266.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: fix off-by-one error in qcow and qcow2Jeff Cody
This fixes an off-by-one error introduced in 9a29e18. Both qcow and qcow2 need to make sure to leave room for string terminator '\0' for the backing file, so the max length of the non-terminated string is either 1023 or PATH_MAX - 1. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23block: update string sizes for filename,backing_file,exact_filenameJeff Cody
The string field entries 'filename', 'backing_file', and 'exact_filename' in the BlockDriverState struct are defined as 1024 bytes. However, many places that use these values accept a maximum of PATH_MAX bytes, so we have a mixture of 1024 byte and PATH_MAX byte allocations. This patch makes the BlockDriverStruct field string sizes match usage. This patch also does a few fixes related to the size that needs to happen now: * the block qapi driver is updated to use PATH_MAX bytes * the qcow and qcow2 drivers have an additional safety check * the block vvfat driver is updated to use PATH_MAX bytes for the size of backing_file, for systems where PATH_MAX is < 1024 bytes. * qemu-img uses PATH_MAX rather than 1024. These instances were not changed to be dynamically allocated, however, as the extra temporary 3K in stack usage for qemu-img does not seem worrisome. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate BlockDriverState member device_name[]Markus Armbruster
device_name[] can become non-empty only in bdrv_new_root() and bdrv_move_feature_fields(). The latter is used only to undo damage done by bdrv_swap(). The former is called only by blk_new_with_bs(). Therefore, when a BlockDriverState's device_name[] is non-empty, then it's been created with a BlockBackend, and vice versa. Furthermore, blk_new_with_bs() keeps the two names equal. Therefore, device_name[] is redundant. Eliminate it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-12block: don't convert file size to sector sizeHu Tao
and avoid converting it back later. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-12block: round up file size to nearest sectorHu Tao
Currently the file size requested by user is rounded down to nearest sector, causing the actual file size could be a bit less than the size user requested. Since some formats (like qcow2) record virtual disk size in bytes, this can make the last few bytes cannot be accessed. This patch fixes it by rounding up file size to nearest sector so that the actual file size is no less than the requested file size. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20block: Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. Patch created with Coccinelle, with two manual changes on top: * Add const to bdrv_iterate_format() to keep the types straight * Convert the allocation in bdrv_drop_intermediate(), which Coccinelle inexplicably misses Coccinelle semantic patch: @@ type T; @@ -g_malloc(sizeof(T)) +g_new(T, 1) @@ type T; @@ -g_try_malloc(sizeof(T)) +g_try_new(T, 1) @@ type T; @@ -g_malloc0(sizeof(T)) +g_new0(T, 1) @@ type T; @@ -g_try_malloc0(sizeof(T)) +g_try_new0(T, 1) @@ type T; expression n; @@ -g_malloc(sizeof(T) * (n)) +g_new(T, n) @@ type T; expression n; @@ -g_try_malloc(sizeof(T) * (n)) +g_try_new(T, n) @@ type T; expression n; @@ -g_malloc0(sizeof(T) * (n)) +g_new0(T, n) @@ type T; expression n; @@ -g_try_malloc0(sizeof(T) * (n)) +g_try_new0(T, n) @@ type T; expression p, n; @@ -g_realloc(p, sizeof(T) * (n)) +g_renew(T, p, n) @@ type T; expression p, n; @@ -g_try_realloc(p, sizeof(T) * (n)) +g_try_renew(T, p, n) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-15qcow1: Handle failure for potentially large allocationsKevin Wolf
Some code in the block layer makes potentially huge allocations. Failure is not completely unexpected there, so avoid aborting qemu and handle out-of-memory situations gracefully. This patch addresses the allocations in the qcow1 block driver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-26block: Catch backing files assigned to non-COW driversKevin Wolf
Since we parse backing.* options to add a backing file from the command line when the driver didn't assign one, it has been possible to have a backing file for e.g. raw images (it just was never accessed). This is obvious nonsense and should be rejected. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-16cleanup QEMUOptionParameterChunyan Liu
Now that all backend drivers are using QemuOpts, remove all QEMUOptionParameter related codes. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16qcow.c: replace QEMUOptionParameter with QemuOptsChunyan Liu
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16change block layer to support both QemuOpts and QEMUOptionParamterChunyan Liu
Change block layer to support both QemuOpts and QEMUOptionParameter. After this patch, it will change backend drivers one by one. At the end, QEMUOptionParameter will be removed and only QemuOpts is kept. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-19qcow1: Stricter backing file length checkKevin Wolf
Like qcow2 since commit 6d33e8e7, error out on invalid lengths instead of silently truncating them to 1023. Also don't rely on bdrv_pread() catching integer overflows that make len negative, but use unsigned variables in the first place. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-05-19qcow1: Validate image size (CVE-2014-0223)Kevin Wolf
A huge image size could cause s->l1_size to overflow. Make sure that images never require a L1 table larger than what fits in s->l1_size. This cannot only cause unbounded allocations, but also the allocation of a too small L1 table, resulting in out-of-bounds array accesses (both reads and writes). Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19qcow1: Validate L2 table size (CVE-2014-0222)Kevin Wolf
Too large L2 table sizes cause unbounded allocations. Images actually created by qemu-img only have 512 byte or 4k L2 tables. To keep things consistent with cluster sizes, allow ranges between 512 bytes and 64k (in fact, down to 1 entry = 8 bytes is technically working, but L2 table sizes smaller than a cluster don't make a lot of sense). This also means that the number of bytes on the virtual disk that are described by the same L2 table is limited to at most 8k * 64k or 2^29, preventively avoiding any integer overflows. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-05-19qcow1: Check maximum cluster sizeKevin Wolf
Huge values for header.cluster_bits cause unbounded allocations (e.g. for s->cluster_cache) and crash qemu this way. Less huge values may survive those allocations, but can cause integer overflows later on. The only cluster sizes that qemu can create are 4k (for standalone images) and 512 (for images with backing files), so we can limit it to 64k. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-05-19qcow1: Make padding in the header explicitKevin Wolf
We were relying on all compilers inserting the same padding in the header struct that is used for the on-disk format. Let's not do that. Mark the struct as packed and insert an explicit padding field for compatibility. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-04-30block: Use correct width in format stringsMax Reitz
Instead of blindly relying on a normal integer having a width of 32 bits (which is a pretty good assumption, but we should not rely on it if there is no need), use the correct format string macros. This does not touch DEBUG output. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-25Fixed various typosDeepak Kathayat
Signed-off-by: Deepak Kathayat <deepak.mk17@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-21block: do not abuse EMEDIUMTYPEPaolo Bonzini
Returning "Wrong medium type" for an image that does not have a valid header is a bit weird. Improve the error by mentioning what format was trying to open it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21qcow: correctly propagate errorsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21block: Make bdrv_file_open() staticMax Reitz
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the call to bdrv_file_open(). Additionally, make bdrv_file_open() static and therefore bdrv_open() the only way to call it. Consequently, all existing calls to bdrv_file_open() have to be adjusted to use bdrv_open() with the BDRV_O_PROTOCOL flag instead. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22block: Allow reference for bdrv_file_open()Max Reitz
Allow specifying a reference to an existing block device (by name) for bdrv_file_open() instead of a filename and/or options. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12block: Error parameter for create functionsMax Reitz
Add an Error ** parameter to bdrv_create and its associated functions to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12block: Error parameter for open functionsMax Reitz
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated functions to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12bdrv: Use "Error" for creating imagesMax Reitz
Add an Error ** parameter to BlockDriver.bdrv_create to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12bdrv: Use "Error" for opening imagesMax Reitz
Add an Error ** parameter to BlockDriver.bdrv_open and BlockDriver.bdrv_file_open to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-06block: return get_block_status data and flags for formatsPaolo Bonzini
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06block: introduce bdrv_get_block_status APIPaolo Bonzini
For now, bdrv_get_block_status is just another name for bdrv_is_allocated. The next patches will add more flags. This also touches all block drivers with a mostly mechanical rename. The sole exception is cow; because it calls cow_co_is_allocated from the read code, we keep that function and make cow_co_get_block_status a wrapper. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06block: make bdrv_delete() staticFam Zheng
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no longer public and should be called by bdrv_unref() if refcnt is decreased to 0. This is an identical change because effectively, there's no multiple reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-28block: change default of .has_zero_init to 0Peter Lieven
.has_zero_init defaults to 1 for all formats and protocols. this is a dangerous default since this means that all new added drivers need to manually overwrite it to 0 if they do not ensure that a device is zero initialized after bdrv_create(). if a driver needs to explicitly set this value to 1 its easier to verify the correctness in the review process. during review of the existing drivers it turned out that ssh and gluster had a wrong default of 1. both protocols support host_devices as backend which are not by default zero initialized. this wrong assumption will lead to possible corruption if qemu-img convert is used to write to such a backend. vpc and vmdk also defaulted to 1 altough they support fixed respectively flat extends. this has to be addresses in separate patches. both formats as well as the mentioned ssh and gluster are turned to the default of 0 with this patch for safety. a similar problem with the wrong default existed for iscsi most likely because the driver developer did oversee the default value of 1. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-22qcow: allow sub-cluster compressed write to last clusterStefan Hajnoczi
Compression in qcow requires image length to be a multiple of the cluster size. Lift this requirement by zero-padding the final cluster when necessary. The virtual disk size is still not cluster-aligned, so the guest cannot access the zero sectors. Note that this is almost identical to the qcow2 version of this code. qcow2's compression code is drawn from qcow. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-13aes: move aes.h from include/block to include/qemuAurelien Jarno
Move aes.h from include/block to include/qemu to show it can be reused by other subsystems. Cc: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-22block: Add options QDict to bdrv_file_open() prototypesKevin Wolf
The new parameter is unused yet. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-15block: Add options QDict to .bdrv_open()Kevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-25block: Use error code EMEDIUMTYPE for wrong format in some block driversStefan Weil
This improves error reports for bochs, cow, qcow, qcow2, qed and vmdk when a file with the wrong format is selected. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-24block: qcow image file reopenJeff Cody
These are the stubs for the file reopen drivers for the qcow format. There is currently nothing that needs to be done by the qcow driver in reopen. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-11change qemu_iovec_to_buf() to match other to,from_buf functionsMichael Tokarev
It now allows specifying offset within qiov to start from and amount of bytes to copy. Actual implementation is just a call to iov_to_buf(). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-11allow qemu_iovec_from_buffer() to specify offset from which to start copyingMichael Tokarev
Similar to qemu_iovec_memset(QEMUIOVector *qiov, size_t offset, int c, size_t bytes); the new prototype is: qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset, const void *buf, size_t bytes); The processing starts at offset bytes within qiov. This way, we may copy a bounce buffer directly to a middle of qiov. This is exactly the same function as iov_from_buf() from iov.c, so use the existing implementation and rename it to qemu_iovec_from_buf() to be shorter and to match the utility function. As with utility implementation, we now assert that the offset is inside actual iovec. Nothing changed for current callers, because `offset' parameter is new. While at it, stop using "bounce-qiov" in block/qcow2.c and copy decrypted data directly from cluster_data instead of recreating a temp qiov for doing that. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-04-05block: push recursive flushing up from driversPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qcow: Use bdrv functions to replace file operationLi Zhi Hui
Since common file operation functions lack of error detection and use much more I/O syscalls, so change them to bdrv series functions and reduce I/O request. Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qcow: Return real error code in qcow_openLi Zhi Hui
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 02:44:38 +0000