aboutsummaryrefslogtreecommitdiff
path: root/block/nbd.c
AgeCommit message (Collapse)Author
2017-05-09sockets: Limit SocketAddressLegacy to external interfacesMarkus Armbruster
SocketAddressLegacy is a simple union, and simple unions are awkward: they have their variant members wrapped in a "data" object on the wire, and require additional indirections in C. SocketAddress is the equivalent flat union. Convert all users of SocketAddressLegacy to SocketAddress, except for existing external interfaces. See also commit fce5d53..9445673 and 85a82e8..c5f1ae3. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Minor editing accident fixed, commit message and a comment tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09sockets: Rename SocketAddressFlat to SocketAddressMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-6-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
2017-05-09sockets: Rename SocketAddress to SocketAddressLegacyMarkus Armbruster
The next commit will rename SocketAddressFlat to SocketAddress, and the commit after that will replace most uses of SocketAddressLegacy by SocketAddress, replacing most of this commit's renames right back. Note that checkpatch emits a few "line over 80 characters" warnings. The long lines are all temporary; the SocketAddressLegacy replacement will shorten them again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09sockets: Prepare inet_parse() for flattened SocketAddressMarkus Armbruster
I'm going to flatten SocketAddress: rename SocketAddress to SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate SocketAddressLegacy except in external interfaces. inet_parse() returns a newly allocated InetSocketAddress. Lift the allocation from inet_parse() into its caller socket_parse() to prepare for flattening SocketAddress. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Straightforward rebase]
2017-05-09qobject: Use simpler QDict/QList scalar insertion macrosEric Blake
We now have macros in place to make it less verbose to add a scalar to QDict and QList, so use them. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then touched up manually to fix a couple of '?:' back to original spacing, as well as avoiding a long line in monitor.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-7-eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-04Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* MemoryRegionCache revert * glib optimization workaround * fix "info lapic" segfault on isapc * fix QIOChannel memory leak # gpg: Signature made Mon 03 Apr 2017 18:17:00 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: main-loop: Acquire main_context lock around os_host_main_loop_wait. exec: revert MemoryRegionCache nbd: fix memory leak on socket_connect failed ipmi: Fix macro issues target-i386: fix "info lapic" segfault on isapc iscsi: drop unused IscsiAIOCB.qiov field Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-03nbd: Tidy up blockdev-add interfaceMarkus Armbruster
SocketAddress is a simple union, and simple unions are awkward: they have their variant members wrapped in a "data" object on the wire, and require additional indirections in C. I intend to limit its use to existing external interfaces, and convert all internal interfaces to SocketAddressFlat. BlockdevOptionsNbd is an external interface using SocketAddress. We already use SocketAddressFlat elsewhere in blockdev-add. Replace it by SocketAddressFlat while we can (it's new in 2.9) for simplicity and consistency. For example, { "execute": "blockdev-add", "arguments": { "node-name": "foo", "driver": "nbd", "server": { "type": "inet", "data": { "host": "localhost", "port": "12345" } } } } becomes { "execute": "blockdev-add", "arguments": { "node-name": "foo", "driver": "nbd", "server": { "type": "inet", "host": "localhost", "port": "12345" } } } Since the internal interfaces still take SocketAddress, this requires conversion function socket_address_crumple(). It'll go away when I update the interfaces. Unfortunately, SocketAddress is also visible in -drive since 2.8: -drive if=none,driver=nbd,server.type=inet,server.data.host=127.0.0.1,server.data.port=12345 Nobody should be using it, as it's fairly new and has never been documented, so adding still more compatibility gunk to keep it working isn't worth the trouble. You now have to use -drive if=none,driver=nbd,server.type=inet,server.host=127.0.0.1,server.port=12345 Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1490895797-29094-9-git-send-email-armbru@redhat.com [mreitz: Change iotest 147 accordingly] Because of this interface change, iotest 147 has to be adapted. Unfortunately, we cannot just flatten all of the addresses because nbd-server-start still takes a plain SocketAddress. Therefore, we need both and this is most easily achieved by writing the SocketAddress into the code and flattening it where necessary. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170330221243.17333-1-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-03block: Document -drive problematic code and bugsMarkus Armbruster
-blockdev and blockdev_add convert their arguments via QObject to BlockdevOptions for qmp_blockdev_add(), which converts them back to QObject, then to a flattened QDict. The QDict's members are typed according to the QAPI schema. -drive converts its argument via QemuOpts to a (flat) QDict. This QDict's members are all QString. Thus, the QType of a flat QDict member depends on whether it comes from -drive or -blockdev/blockdev_add, except when the QAPI type maps to QString, which is the case for 'str' and enumeration types. The block layer core extracts generic configuration from the flat QDict, and the block driver extracts driver-specific configuration. Both commonly do so by converting (parts of) the flat QDict to QemuOpts, which turns all values into strings. Not exactly elegant, but correct. However, A few places access the flat QDict directly: * Most of them access members that are always QString. Correct. * bdrv_open_inherit() accesses a boolean, carefully. Correct. * nfs_config() uses a QObject input visitor. Correct only because the visited type contains nothing but QStrings. * nbd_config() and ssh_config() use a QObject input visitor, and the visited types contain non-QStrings: InetSocketAddress members @numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try to use them (they're all optional). @to is ignored anyway. Reproducer: -drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p -drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4 both fail with "Invalid parameter type for 'data.ipv4', expected: boolean" Add suitable comments to all these places. Mark the buggy ones FIXME. "Fortunately", -drive's driver-specific options are entirely undocumented. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com [mreitz: Fixed two typos] Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-03nbd sockets vnc: Mark problematic address family tests TODOMarkus Armbruster
Certain features make sense only with certain address families. For instance, passing file descriptors requires AF_UNIX. Testing SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious, but problematic: it can't recognize AF_UNIX when type == SOCKET_ADDRESS_KIND_FD. Mark such tests of saddr->type TODO. We may want to check the address family with getsockname() there. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-02nbd: fix memory leak on socket_connect failedyaolujing
When TCP connection fails between nbd server and client, the local var, sioc, memory leak. This patch fixes the memory leak. Signed-off-by: yaolujing <yaolujing@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1491005709-29989-1-git-send-email-yaolujing@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-27nbd: drop unused NBDClientSession.is_unix fieldStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170327123223.1199-1-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-05qapi: Drop unused non-strict qobject input visitorMarkus Armbruster
The split between tests/test-qobject-input-visitor.c and tests/test-qobject-input-strict.c now makes less sense than ever. The next commit will take care of that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
2017-02-22block: Don't bother asserting type of output visitor's outputMarkus Armbruster
After a visit of a complex QAPI type FOO ov = qobject_output_visitor_new(&foo); visit_type_FOO(ov, NULL, expr, &error_abort); visit_complete(ov, &foo); we can safely assume qobject_type(foo) is QTYPE_QDICT. We do in many places, but occasionally assert qobject_type(obj) == QTYPE_QDICT. Don't. The appropriate place to check such fundamental properties of QAPI visitors is the test suite. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1487363905-9480-15-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-11-11block/nbd: Fix the leaked visitorAshijeet Acharya
This patch frees the leaked visitor in nbd_refresh_filename() and uses visit_free() to fix it. The leak was introduced by the commit 491d6c7. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-02nbd: Implement NBD_CMD_WRITE_ZEROES on clientEric Blake
Upstream NBD protocol recently added the ability to efficiently write zeroes without having to send the zeroes over the wire, along with a flag to control whether the client wants a hole. The generic block code takes care of falling back to the obvious write of lots of zeroes if we return -ENOTSUP because the server does not have WRITE_ZEROES. Ideally, since NBD_CMD_WRITE_ZEROES does not involve any data over the wire, we want to support transactions that are much larger than the normal 32M limit imposed on NBD_CMD_WRITE. But the server may still have a limit smaller than UINT_MAX, so until experimental NBD protocol additions for advertising various command sizes is finalized (see [1], [2]), for now we just stick to the same limits as normal writes. [1] https://github.com/yoe/nbd/blob/extension-info/doc/proto.md [2] https://sourceforge.net/p/nbd/mailman/message/35081223/ Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1476469998-28592-17-git-send-email-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-02nbd: Rename NbdClientSession to NBDClientSessionEric Blake
It's better to use consistent capitalization of the namespace used for NBD functions; we have more instances of NBD* than Nbd*. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1476469998-28592-5-git-send-email-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-28Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' ↵Peter Maydell
into staging Merge qio 2016/10/27 v1 # gpg: Signature made Thu 27 Oct 2016 13:54:03 BST # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qio-2016-10-27-1: main: set names for main loop sources created vnc: set name for all I/O channels created migration: set name for all I/O channels created char: set name for all I/O channels created nbd: set name for all I/O channels created io: add ability to set a name for IO channels io: Add a QIOChannelSocket cleanup test io: set LISTEN flag explicitly for listen sockets io: Introduce a qio_channel_set_feature() helper io: Use qio_channel_has_feature() where applicable io: Fix double shift usages on QIOChannel features Conflicts: qemu-char.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-27block/nbd: Use SocketAddress optionsMax Reitz
Drop the use of legacy options in favor of the SocketAddress representation, even for internal use (i.e. for storing the result of the filename parsing). Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-27block/nbd: Accept SocketAddressMax Reitz
Add a new option "server" to the NBD block driver which accepts a SocketAddress. "path", "host" and "port" are still supported as legacy options and are mapped to their corresponding SocketAddress representation. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-27block/nbd: Add nbd_has_filename_options_conflict()Max Reitz
Right now, we have four possible options that conflict with specifying an NBD filename, and a future patch will add another one ("address"). This future option is a nested QDict that is flattened at this point, requiring us to test each option whether its key has an "address." prefix. Therefore, we will then need to iterate through all options (including the "export" option which was not covered so far). Adding this iteration logic now will simplify adding the new option later. A nice side effect is that the user will not receive a long list of five options which are not supposed to be specified with a filename, but we can actually print the problematic option. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-27block/nbd: Use qdict_put()Max Reitz
Instead of inlining this nice macro (i.e. resorting to qdict_put_obj(..., QOBJECT(...))), use it. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-27block/nbd: Default port in nbd_refresh_filename()Max Reitz
Instead of not emitting the port in nbd_refresh_filename(), just set it to the default if the user did not specify it. This makes the logic a bit simpler. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-27block/nbd: Reject port parameter without hostMax Reitz
Currently, a port that is passed along with a UNIX socket path is silently ignored. That is not exactly ideal, it should be an error instead. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-27block/nbd: Drop trailing "." in error messagesMax Reitz
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-27nbd: set name for all I/O channels createdDaniel P. Berrange
Ensure that all I/O channels created for NBD are given names to distinguish their respective roles. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-08-15block/nbd: Store runtime option valuesMax Reitz
Store the runtime option values in the BDRVNBDState so they can later be used in nbd_refresh_filename() without having to directly access the options QDict which may contain values of non-string types. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-08-15block/nbd: Use QemuOpts for runtime optionsMax Reitz
Using QemuOpts will prevent qemu from crashing if the input options have not been validated (which is the case when they are specified on the command line or in a json: filename) and some have the wrong type. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-20nbd: Convert to byte-based interfaceEric Blake
The NBD protocol doesn't have any notion of sectors, so it is a fairly easy conversion to use byte-based read and write. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468624988-423-19-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20nbd: Switch .bdrv_co_discard() to byte-basedEric Blake
Another step towards killing off sector-based block APIs. While at it, call directly into nbd-client.c instead of having a pointless trivial wrapper in nbd.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-14-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20nbd: Rely on block layer to break up large requestsEric Blake
Now that the block layer will honor max_transfer, we can simplify our code to rely on that guarantee. The readv code can call directly into nbd-client, just as the writev code has done since commit 52a4650. Interestingly enough, while qemu-io 'w 0 40m' splits into a 32M and 8M transaction, 'w -z 0 40m' splits into two 16M and an 8M, because the block layer caps the bounce buffer for writing zeroes at 16M. When we later introduce support for NBD_CMD_WRITE_ZEROES, we can get a full 32M zero write (or larger, if the client and server negotiate that write zeroes can use a larger size than ordinary writes). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468607524-19021-5-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Switch discard length bounds to byte-basedEric Blake
Sector-based limits are awkward to think about; in our on-going quest to move to byte-based interfaces, convert max_discard and discard_alignment. Rename them, using 'pdiscard' as an aid to track which remaining discard interfaces need conversion, and so that the compiler will help us catch the change in semantics across any rebased code. The BlockLimits type is now completely byte-based; and in iscsi.c, sector_limits_lun2qemu() is no longer needed. pdiscard_alignment is made unsigned (we use power-of-2 alignments as bitmasks, where unsigned is easier to think about) while leaving max_pdiscard signed (since we still have an 'int' interface); this is comparable to what commit cf081fc did for write zeroes limits. We may later want to make everything an unsigned 64-bit limit - but that requires a bigger code audit. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05block: Switch transfer length bounds to byte-basedEric Blake
Sector-based limits are awkward to think about; in our on-going quest to move to byte-based interfaces, convert max_transfer_length and opt_transfer_length. Rename them (dropping the _length suffix) so that the compiler will help us catch the change in semantics across any rebased code, and improve the documentation. Use unsigned values, so that we don't have to worry about negative values and so that bit-twiddling is easier; however, we are still constrained by 2^31 of signed int in most APIs. When a value comes from an external source (iscsi and raw-posix), sanitize the results to ensure that opt_transfer is a power of 2. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05nbd: Advertise realistic limits to block layerEric Blake
We were basing the advertisement of maximum discard and transfer length off of UINT32_MAX, but since the rest of the block layer has signed int limits on a transaction, nothing could ever reach that maximum, and we risk overflowing an int once things are converted to byte-based rather than sector-based limits. What's more, we DO have a much smaller limit: both the current kernel and qemu-nbd have a hard limit of 32M on a read or write transaction, and while they may also permit up to a full 32 bits on a discard transaction, the upstream NBD protocol is proposing wording that without any explicit advertisement otherwise, clients should limit ALL requests to the same limits as read and write, even though the other requests do not actually require as many bytes across the wire. So the better limit to tell the block layer is 32M for both values. Behavior doesn't actually change with this patch (the block layer is currently ignoring the max_transfer advertisements); but when that problem is fixed in a later series, this patch will prevent the exposure of a latent bug. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12nbd: Simplify client FUA handlingEric Blake
Now that the block layer honors per-bds FUA support, we don't have to duplicate the fallback flush at the NBD layer. The static function nbd_co_writev_flags() is no longer needed, and the driver can just directly use nbd_client_co_writev(). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12block: Make supported_write_flags a per-bds propertyEric Blake
Pre-patch, .supported_write_flags lives at the driver level, which means we are blindly declaring that all block devices using a given driver will either equally support FUA, or that we need a fallback at the block layer. But there are drivers where FUA support is a per-block decision: the NBD block driver is dependent on the remote server advertising NBD_FLAG_SEND_FUA (and has fallback code to duplicate the flush that the block layer would do if NBD had not set .supported_write_flags); and the iscsi block driver is dependent on the mode sense bits advertised by the underlying device (and is currently silently ignoring FUA requests if the underlying device does not support FUA). The fix is to make supported flags as a per-BDS option, set during .bdrv_open(). This patch moves the variable and fixes NBD and iscsi to set it only conditionally; later patches will then further simplify the NBD driver to quit duplicating work done at the block layer, as well as tackle the fact that SCSI does not support FUA semantics on WRITESAME(10/16) but only on WRITE(10/16). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12block: Introduce bdrv_driver_pwritev()Kevin Wolf
This is a function that simply calls into the block driver for doing a write, providing the byte granularity interface we want to eventually have everywhere, and using whatever interface that driver supports. This one is a bit more interesting than the version for reads: It adds support for .bdrv_co_writev_flags() everywhere, so that drivers implementing this function can drop .bdrv_co_writev() now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2016-03-30nbd: Support BDRV_REQ_FUAKevin Wolf
The NBD server already used to send a FUA flag when the writethrough mode was set. This code was a remnant from the times where protocol drivers actually had to implement writethrough modes. Since nowadays the block layer sends flushes in writethrough mode and non-root nodes are always writeback, this was mostly dead code - only mostly because if NBD was configured to be used without a format, we sent _both_ FUA and an explicit flush afterwards, which makes the code not technically dead, but useless overhead. This patch changes the code so that the block layer's FUA flag is recognised and translated into a NBD FUA flag. The additional flush is avoided now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-05util: Shorten references into SocketAddressEric Blake
An upcoming patch will alter how simple unions, like SocketAddress, are laid out, which will impact all lines of the form 'addr->u.XXX' (expanding it to the longer 'addr->u.XXX.data'). For better legibility in that patch, and less need for line wrapping, it's better to use a temporary variable to reduce the effect of a layout change to just the variable initializations, rather than every reference within a SocketAddress. Also, take advantage of some C99 initialization where it makes sense (simplifying g_new0() to g_new()). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1457021813-10704-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-16nbd: enable use of TLS with NBD block driverDaniel P. Berrange
This modifies the NBD driver so that it is possible to request use of TLS. This is done by providing the 'tls-creds' parameter with the ID of a previously created QCryptoTLSCreds object. For example $QEMU -object tls-creds-x509,id=tls0,endpoint=client,\ dir=/home/berrange/security/qemutls \ -drive driver=nbd,host=localhost,port=9000,tls-creds=tls0 The client will drop the connection if the NBD server does not provide TLS. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-15-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: convert block client to use I/O channels for connection setupDaniel P. Berrange
This converts the NBD block driver client to use the QIOChannelSocket class for initial connection setup. The NbdClientSession struct has two pointers, one to the master QIOChannelSocket providing the raw data channel, and one to a QIOChannel which is the current channel used for I/O. Initially the two point to the same object, but when TLS support is added, they will point to different objects. The qemu-img & qemu-io tools now need to use MODULE_INIT_QOM to ensure the QIOChannel object classes are registered. The qemu-nbd tool already did this. In this initial conversion though, all I/O is still actually done using the raw POSIX sockets APIs. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-20block: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18block: Pass driver-specific options to .bdrv_refresh_filename()Kevin Wolf
In order to decide whether a blkdebug: filename can be produced or a json: one is necessary, blkdebug checked whether bs->options had more options than just "config", "x-image" or "image" (the latter including nested options). That doesn't work well when generic block layer options are present. This patch passes an option QDict to the driver that contains only driver-specific options, i.e. the options for the general block layer as well as child nodes are already filtered out. Works much better this way. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-11-02block: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for block-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-16-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-25nbd: convert to use the QAPI SocketAddress objectDaniel P. Berrange
The nbd block driver currently uses a QemuOpts object when setting up sockets. Switch it over to use the QAPI SocketAddress object instead. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1442411543-28513-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-18nbd: Fix nbd_establish_connection()'s return valueMax Reitz
unix_connect_opts() and inet_connect_opts() do not necessarily set errno (if at all); therefore, nbd_establish_connection() should not literally return -errno on error. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <1424887718-10800-4-git-send-email-mreitz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10nbd: fix resource leakGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-26QemuOpts: Convert qemu_opt_set_number() to Error, fix its useMarkus Armbruster
Return the Error object instead of reporting it with qerror_report_err(). Change callers that assume the function can't fail to pass &error_abort, so that should the assumption ever break, it'll break noisily. Turns out all callers outside its unit test assume that. We could drop the Error ** argument, but that would make the interface less regular, so don't. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 13:20:17 +0000