| Age | Commit message (Collapse) | Author |
|---|
|
In order to test that the NBD server is properly advertising
dirty bitmaps, we need a bare minimum client that can request
and read the context. Since feature freeze for 3.0 is imminent,
this is the smallest workable patch, which replaces the qemu
block status report with the results of the NBD server's dirty
bitmap (making it very easy to use 'qemu-img map --output=json'
to learn where the dirty portions are). Note that the NBD
protocol defines a dirty section with the same bit but opposite
sense that normal "base:allocation" uses to report an allocated
section; so in qemu-img map output, "data":true corresponds to
clean, "data":false corresponds to dirty.
A more complete solution that allows dirty bitmaps to be queried
at the same time as normal block status will be required before
this addition can lose the x- prefix. Until then, the fact that
this replaces normal status with dirty status means actions
like 'qemu-img convert' will likely misbehave due to treating
dirty regions of the file as if they are unallocated.
The next patch adds an iotest to exercise this new code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-2-eblake@redhat.com>
|
|
The NBD spec is proposing a relaxation of NBD_CMD_BLOCK_STATUS
where a server may have the final extent per context give a
length beyond the original request, if it can easily prove that
subsequent bytes have the same status, on the grounds that a
client can take advantage of this information for fewer block
status requests. Since qemu 2.12 as a client always sends
NBD_CMD_FLAG_REQ_ONE, and rejects a server that sends extra
length, the upstream NBD spec will probably limit this behavior
to clients that don't request REQ_ONE semantics; but it doesn't
hurt to relax qemu to always be permissive of this server
behavior, even if it continues to use REQ_ONE.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180503222626.1303410-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
iotests 123 and 209 fail on 32-bit platforms. The culprit:
sizeof(extent) is wrong; we want sizeof(*extent). But since
the struct is 8 bytes, it happened to work on 64-bit platforms
where the pointer is also 8 bytes (nasty).
Fixes: 78a33ab58
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180327210517.1804242-1-eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
Minimal realization: only one extent in server answer is supported.
Flag NBD_CMD_FLAG_REQ_ONE is used to force this behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, fix min_block check and 32-bit cap, use -1
instead of errno on failure in nbd_negotiate_simple_meta_context,
ensure that block status makes progress on success]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
It is ok, that fatal error hides previous not fatal, but hiding
first fatal error is a bad feature.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180312152126.286890-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Commit 79ba8c98 (v2.7) changed the setting of request_alignment
to occur only during bdrv_refresh_limits(), rather than at at
bdrv_open() time; but at the time, NBD was unaffected, because
it still used sector-based callbacks, so the block layer
defaulted NBD to use 512 request_alignment.
Later, commit 70c4fb26 (also v2.7) changed NBD to use byte-based
callbacks, without setting request_alignment. This resulted in
NBD using request_alignment of 1, which works great when the
server supports it (as is the case for qemu-nbd), but falls apart
miserably if the server requires alignment (but only if qemu
actually sends a sub-sector request; qemu-io can do it, but
most qemu operations still perform on sectors or larger).
Even later, the NBD protocol was updated to document that clients
should learn the server's minimum alignment during NBD_OPT_GO;
and recommended that clients should assume a minimum size of 512
unless the server understands NBD_OPT_GO and replied with a smaller
size. Commit 081dd1fe (v2.10) attempted to do that, by assigning
request_alignment to whatever was learned from the server; but
it has two flaws: the assignment is done during bdrv_open() so
it gets unconditionally wiped out back to 1 during any later
bdrv_refresh_limits(); and the code is not using a default of 512
when the server did not report a minimum size.
Fix these issues by moving the assignment to request_alignment
to the right function, and by using a sane default when the
server does not advertise a minimum size.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180215032905.27146-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com>
|
|
If a server fails a read, for example with EIO, but the connection
is still live, then we would crash trying to print a non-existent
error message in nbd_client_co_preadv(). For consistency, also
change the error printout in nbd_read_reply_entry(), although that
instance does not crash. Bug introduced in commit f140e300.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171112013936.5942-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
Ensure that the server is not sending unexpected chunk lengths
for either the NONE or the OFFSET_DATA chunk, nor unexpected
hole length for OFFSET_HOLE. This will flag any server as
broken that responds to a zero-length read with an OFFSET_DATA
(what our server currently does, but that's about to be fixed)
or with OFFSET_HOLE, even though we previously fixed our client
to never be able to send such a request over the wire.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-7-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
The NBD spec was recently clarified to state that clients should
not send 0-length requests to the server, as the server behavior
is undefined [1]. We know that qemu-nbd's behavior is a successful
no-op (once it has filtered for read-only exports), but other NBD
implementations might return an error. To avoid any questionable
server implementations, it is better to just short-circuit such
requests on the client side (we are relying on the block layer to
already filter out requests such as invalid offset, write to a
read-only volume, and so forth); do the short-circuit as late as
possible to still benefit from protections from assertions that
the block layer is not violating our assumptions.
[1] https://github.com/NetworkBlockDevice/nbd/commit/ee926037
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-6-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
The NBD spec says that clients should not try to write/trim to
an export advertised as read-only by the server. But we failed
to check that, and would allow the block layer to use NBD with
BDRV_O_RDWR even when the server is read-only, which meant we
were depending on the server sending a proper EPERM failure for
various commands, and also exposes a leaky abstraction: using
qemu-io in read-write mode would succeed on 'w -z 0 0' because
of local short-circuiting logic, but 'w 0 0' would send a
request over the wire (where it then depends on the server, and
fails at least for qemu-nbd but might pass for other NBD
implementations).
With this patch, a client MUST request read-only mode to access
a server that is doing a read-only export, or else it will get
a message like:
can't open device nbd://localhost:10809/foo: request for write access conflicts with read-only export
It is no longer possible to even attempt writes over the wire
(including the corner case of 0-length writes), because the block
layer enforces the explicit read-only request; this matches the
behavior of qcow2 when backed by a read-only POSIX file.
Fix several iotests to comply with the new behavior (since
qemu-nbd of an internal snapshot, as well as nbd-server-add over QMP,
default to a read-only export, we must tell blockdev-add/qemu-io to
set up a read-only client).
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
Provide missing spaces that are required when using string
concatenation to break error messages across source lines.
Introduced in commit f140e300.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
Minimal implementation: for structured error only error_report error
message.
Note that test 83 is now more verbose, because the implementation
prints more warnings about unexpected communication errors; perhaps
future patches should tone things down by using trace messages
instead of traces, but the common case of successful communication
is no noisier than before.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-13-eblake@redhat.com>
|
|
In following patch nbd_receive_reply will be used both for simple
and structured reply header receiving.
NBDReply is altered into union of simple reply header and structured
reply chunk header, simple error translation moved to block/nbd-client
to be consistent with further structured reply error translation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-11-eblake@redhat.com>
|
|
Pass handle parameter directly, as the whole request isn't needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Also improve the assertion: check that qiov is NULL for other commands
than CMD_READ and CMD_WRITE.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
It's incorrect to return success rc >= 0 if we skip qio_channel_writev_all()
call due to s->quit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170920124507.18841-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
If we are woken up from while() loop in nbd_read_reply_entry
handles must be equal. If we are woken up from
nbd_recv_coroutines_wake_all s->quit must be true, so we do
not need checking handles equality.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170920124507.18841-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
"NBDReply *reply" parameter of nbd_co_receive_reply is used only
to pass return value for nbd_co_request (reply.error). Remove it
and use function return value instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170920124507.18841-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
If 'bs' is a complex expression, we were only casting the front half
rather than the full expression. Luckily, none of the callers were
passing bad arguments, but it's better to be robust up front.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170918214649.17550-1-eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Rather than open-coding our own read/write-all functions, we
can make use of the recently-added qio code. It slightly
changes the error message in one of the iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170905191114.5959-4-eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
|
|
Add nbd_co_request, to remove code duplications in
nbd_client_co_{pwrite,pread,...} functions. Also this is
needed for further refactoring.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-8-vsementsov@virtuozzo.com>
[eblake: make nbd_co_request a wrapper, rather than merging two
existing functions]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Rename nbd_recv_coroutines_enter_all to nbd_recv_coroutines_wake_all,
as it most probably just adds all recv coroutines into co_queue_wakeup,
rather than directly enter them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-9-vsementsov@virtuozzo.com>
[eblake: tweak commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Use int variable for nbd_co_send_request return value (as
nbd_co_send_request returns int).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
The following segfault is encountered if the NBD server closes the UNIX
domain socket immediately after negotiation:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 aio_co_schedule (ctx=0x0, co=0xd3c0ff2ef0) at util/async.c:441
441 QSLIST_INSERT_HEAD_ATOMIC(&ctx->scheduled_coroutines,
(gdb) bt
#0 0x000000d3c01a50f8 in aio_co_schedule (ctx=0x0, co=0xd3c0ff2ef0) at util/async.c:441
#1 0x000000d3c012fa90 in nbd_coroutine_end (bs=bs@entry=0xd3c0fec650, request=<optimized out>) at block/nbd-client.c:207
#2 0x000000d3c012fb58 in nbd_client_co_preadv (bs=0xd3c0fec650, offset=0, bytes=<optimized out>, qiov=0x7ffc10a91b20, flags=0) at block/nbd-client.c:237
#3 0x000000d3c0128e63 in bdrv_driver_preadv (bs=bs@entry=0xd3c0fec650, offset=offset@entry=0, bytes=bytes@entry=512, qiov=qiov@entry=0x7ffc10a91b20, flags=0) at block/io.c:836
#4 0x000000d3c012c3e0 in bdrv_aligned_preadv (child=child@entry=0xd3c0ff51d0, req=req@entry=0x7f31885d6e90, offset=offset@entry=0, bytes=bytes@entry=512, align=align@entry=1, qiov=qiov@entry=0x7ffc10a91b20, f
+lags=0) at block/io.c:1086
#5 0x000000d3c012c6b8 in bdrv_co_preadv (child=0xd3c0ff51d0, offset=offset@entry=0, bytes=bytes@entry=512, qiov=qiov@entry=0x7ffc10a91b20, flags=flags@entry=0) at block/io.c:1182
#6 0x000000d3c011cc17 in blk_co_preadv (blk=0xd3c0ff4f80, offset=0, bytes=512, qiov=0x7ffc10a91b20, flags=0) at block/block-backend.c:1032
#7 0x000000d3c011ccec in blk_read_entry (opaque=0x7ffc10a91b40) at block/block-backend.c:1079
#8 0x000000d3c01bbb96 in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at util/coroutine-ucontext.c:79
#9 0x00007f3196cb8600 in __start_context () at /lib64/libc.so.6
The problem is that nbd_client_init() uses
nbd_client_attach_aio_context() -> aio_co_schedule(new_context,
client->read_reply_co). Execution of read_reply_co is deferred to a BH
which doesn't run until later.
In the mean time blk_co_preadv() can be called and nbd_coroutine_end()
calls aio_wake() on read_reply_co. At this point in time
read_reply_co's ctx isn't set because it has never been entered yet.
This patch simplifies the nbd_co_send_request() ->
nbd_co_receive_reply() -> nbd_coroutine_end() lifecycle to just
nbd_co_send_request() -> nbd_co_receive_reply(). The request is "ended"
if an error occurs at any point. Callers no longer have to invoke
nbd_coroutine_end().
This cleanup also eliminates the segfault because we don't call
aio_co_schedule() to wake up s->read_reply_co if sending the request
failed. It is only necessary to wake up s->read_reply_co if a reply was
received.
Note this only happens with UNIX domain sockets on Linux. It doesn't
seem possible to reproduce this with TCP sockets.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-2-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
The following scenario leads to an assertion failure in
qio_channel_yield():
1. Request coroutine calls qio_channel_yield() successfully when sending
would block on the socket. It is now yielded.
2. nbd_read_reply_entry() calls nbd_recv_coroutines_enter_all() because
nbd_receive_reply() failed.
3. Request coroutine is entered and returns from qio_channel_yield().
Note that the socket fd handler has not fired yet so
ioc->write_coroutine is still set.
4. Request coroutine attempts to send the request body with nbd_rwv()
but the socket would still block. qio_channel_yield() is called
again and assert(!ioc->write_coroutine) is hit.
The problem is that nbd_read_reply_entry() does not distinguish between
request coroutines that are waiting to receive a reply and those that
are not.
This patch adds a per-request bool receiving flag so
nbd_read_reply_entry() can avoid spurious aio_wake() calls.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170822125113.5025-1-stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
travis builds fail at HEAD at rc3 master with
block/nbd-client.c: In function ‘nbd_read_reply_entry’:
block/nbd-client.c:110:8: error: ‘ret’ may be used uninitialized in this function [-Werror=uninitialized]
fix it by initializing 'ret' to 0
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When we switched NBD to use coroutines for qemu 2.9 (in particular,
commit a12a712a), we introduced a regression: if a server sends us
garbage (such as a corrupted magic number), we quit the read loop
but do not stop sending further queued commands, resulting in the
client hanging when it never reads the response to those additional
commands. In qemu 2.8, we properly detected that the server is no
longer reliable, and cancelled all existing pending commands with
EIO, then tore down the socket so that all further command attempts
get EPIPE.
Restore the proper behavior of quitting (almost) all communication
with a broken server: Once we know we are out of sync or otherwise
can't trust the server, we must assume that any further incoming
data is unreliable and therefore end all pending commands with EIO,
and quit trying to send any further commands. As an exception, we
still (try to) send NBD_CMD_DISC to let the server know we are going
away (in part, because it is easier to do that than to further
refactor nbd_teardown_connection, and in part because it is the
only command where we do not have to wait for a reply).
Based on a patch by Vladimir Sementsov-Ogievskiy.
A malicious server can be created with the following hack,
followed by setting NBD_SERVER_DEBUG to a non-zero value in the
environment when running qemu-nbd:
| --- a/nbd/server.c
| +++ b/nbd/server.c
| @@ -919,6 +919,17 @@ static int nbd_send_reply(QIOChannel *ioc, NBDReply *reply, Error **errp)
| stl_be_p(buf + 4, reply->error);
| stq_be_p(buf + 8, reply->handle);
|
| + static int debug;
| + static int count;
| + if (!count++) {
| + const char *str = getenv("NBD_SERVER_DEBUG");
| + if (str) {
| + debug = atoi(str);
| + }
| + }
| + if (debug && !(count % debug)) {
| + buf[0] = 0;
| + }
| return nbd_write(ioc, buf, sizeof(buf), errp);
| }
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170814213426.24681-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.
When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.
When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The NBD Protocol is introducing some additional information
about exports, such as minimum request size and alignment, as
well as an advertised maximum request size. It will be easier
to feed this information back to the block layer if we gather
all the information into a struct, rather than adding yet more
pointer parameters during negotiation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When attaching the NBD QIOChannel to an AioContext, the TLS channel should
be used, not the underlying socket channel. This is because, trivially,
the TLS channel will be the one that we read/write to and thus the one
that will get the qio_channel_yield() call.
Fixes: ff82911cd3f69f028f2537825c9720ff78bc3f19
Cc: qemu-stable@nongnu.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Rename
nbd_wr_syncv -> nbd_rwv
read_sync -> nbd_read
read_sync_eof -> nbd_read_eof
write_sync -> nbd_write
drop_sync -> nbd_drop
1. nbd_ prefix
read_sync and write_sync are already shared, so it is good to have a
namespace prefix. drop_sync will be shared, and read_sync_eof is
related to read_sync, so let's rename them all.
2. _sync suffix
_sync is related to the fact that nbd_wr_syncv doesn't return if a
write to socket returns EAGAIN. The first implementation of
nbd_wr_syncv (was wr_sync in 7a5ca8648b) just loops while getting
EAGAIN, the current implementation yields in this case.
Why we want to get rid of it:
- it is normal for r/w functions to be synchronous, so having an
additional suffix for it looks redundant (contrariwise, we have
_aio suffix for async functions)
- _sync suffix in block layer is used when function does flush (so
using it for other thing is confusing a bit)
- keep function names short after adding nbd_ prefix
3. for nbd_wr_syncv let's use more common notation 'rw'
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170602150150.258222-2-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
NBD is not thread safe, because it accesses s->in_flight without
a CoMutex. Fixing this will be required for multiqueue.
CoQueue doesn't have spurious wakeups but, when another coroutine can
run between qemu_co_queue_next's wakeup and qemu_co_queue_wait's
re-locking of the mutex, the wait condition can become false and
a loop is necessary.
In fact, it turns out that the loop is necessary even without this
multi-threaded scenario. A particular sequence of coroutine wakeups
is happening ~80% of the time when starting a guest with qcow2 image
served over NBD (i.e. qemu-nbd --format=raw, and QEMU's -drive option
has -format=qcow2). This patch fixes that issue too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move to modern errp scheme from just LOGging errors.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170526110913.89098-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Will be used in following patch to provide actual error message in
some cases.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170516094533.6160-4-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
After the switch to reading replies in a coroutine, nothing is
reentering pending receive coroutines if the connection hangs.
Move nbd_recv_coroutines_enter_all to the reply read coroutine,
which is the place where hangups are detected. nbd_teardown_connection
can simply wait for the reply read coroutine to detect the hangup
and clean up after itself.
This wouldn't be enough though because nbd_receive_reply returns 0
(rather than -EPIPE or similar) when reading from a hung connection.
Fix the return value check in nbd_read_reply_entry.
This fixes qemu-iotests 083.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170314111157.14464-1-pbonzini@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
All that CoQueue needs in order to become thread-safe is help
from an external mutex. Add this to the API.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213181244.16297-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
In the client, read the reply headers from a coroutine, switching the
read side between the "read header" coroutine and the I/O coroutine that
reads the body of the reply.
In the server, if the server can read more requests it will create a new
"read request" coroutine as soon as a request has been read. Otherwise,
the new coroutine is created in nbd_request_put.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-8-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The new AioPollFn io_poll() argument to aio_set_fd_handler() and
aio_set_event_handler() is used in the next patch.
Keep this code change separate due to the number of files it touches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Commit fa778fff wired up support to send the NBD_CMD_WRITE_ZEROES,
but forgot to inform the block layer that FUA unmapping of zeroes is
supported. Without BDRV_REQ_MAY_UNMAP listed as a supported flag,
the block layer will always insist on the NBD layer passing
NBD_CMD_FLAG_NO_HOLE, resulting in the server always allocating
things even when it was desired to let the server punch holes.
Similarly, failing to set BDRV_REQ_FUA means that the client may
send unnecessary NBD_CMD_FLUSH when it could have instead used the
NBD_CMD_FLAG_FUA bit.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1479413642-22463-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Upstream NBD protocol recently added the ability to efficiently
write zeroes without having to send the zeroes over the wire,
along with a flag to control whether the client wants a hole.
The generic block code takes care of falling back to the obvious
write of lots of zeroes if we return -ENOTSUP because the server
does not have WRITE_ZEROES.
Ideally, since NBD_CMD_WRITE_ZEROES does not involve any data
over the wire, we want to support transactions that are much
larger than the normal 32M limit imposed on NBD_CMD_WRITE. But
the server may still have a limit smaller than UINT_MAX, so
until experimental NBD protocol additions for advertising various
command sizes is finalized (see [1], [2]), for now we just stick to
the same limits as normal writes.
[1] https://github.com/yoe/nbd/blob/extension-info/doc/proto.md
[2] https://sourceforge.net/p/nbd/mailman/message/35081223/
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-17-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Our coding convention prefers CamelCase names, and we already
have other existing structs with NBDFoo naming. Let's be
consistent, before later patches add even more structs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-6-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It's better to use consistent capitalization of the namespace
used for NBD functions; we have more instances of NBD* than
Nbd*.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-5-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Current upstream NBD documents that requests have a 16-bit flags,
followed by a 16-bit type integer; although older versions mentioned
only a 32-bit field with masking to find flags. Since the protocol
is in network order (big-endian over the wire), the ABI is unchanged;
but dealing with the flags as a separate field rather than masking
will make it easier to add support for upcoming NBD extensions that
increase the number of both flags and commands.
Improve some comments in nbd.h based on the current upstream
NBD protocol (https://github.com/yoe/nbd/blob/master/doc/proto.md),
and touch some nearby code to keep checkpatch.pl happy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
NBD is using the CoMutex in a way that wasn't anticipated. For example, if there are
N(N=26, MAX_NBD_REQUESTS=16) nbd write requests, so we will invoke nbd_client_co_pwritev
N times.
----------------------------------------------------------------------------------------
time request Actions
1 1 in_flight=1, Coroutine=C1
2 2 in_flight=2, Coroutine=C2
...
15 15 in_flight=15, Coroutine=C15
16 16 in_flight=16, Coroutine=C16, free_sema->holder=C16, mutex->locked=true
17 17 in_flight=16, Coroutine=C17, queue C17 into free_sema->queue
18 18 in_flight=16, Coroutine=C18, queue C18 into free_sema->queue
...
26 N in_flight=16, Coroutine=C26, queue C26 into free_sema->queue
----------------------------------------------------------------------------------------
Once nbd client recieves request No.16' reply, we will re-enter C16. It's ok, because
it's equal to 'free_sema->holder'.
----------------------------------------------------------------------------------------
time request Actions
27 16 in_flight=15, Coroutine=C16, free_sema->holder=C16, mutex->locked=false
----------------------------------------------------------------------------------------
Then nbd_coroutine_end invokes qemu_co_mutex_unlock what will pop coroutines from
free_sema->queue's head and enter C17. More free_sema->holder is C17 now.
----------------------------------------------------------------------------------------
time request Actions
28 17 in_flight=16, Coroutine=C17, free_sema->holder=C17, mutex->locked=true
----------------------------------------------------------------------------------------
In above scenario, we only recieves request No.16' reply. As time goes by, nbd client will
almostly recieves replies from requests 1 to 15 rather than request 17 who owns C17. In this
case, we will encounter assert "mutex->holder == self" failed since Kevin's commit 0e438cdc
"coroutine: Let CoMutex remember who holds it". For example, if nbd client recieves request
No.15' reply, qemu will stop unexpectedly:
----------------------------------------------------------------------------------------
time request Actions
29 15(most case) in_flight=15, Coroutine=C15, free_sema->holder=C17, mutex->locked=false
----------------------------------------------------------------------------------------
Per Paolo's suggestion "The simplest fix is to change it to CoQueue, which is like a condition
variable", this patch replaces CoMutex with CoQueue.
Cc: Wen Congyang <wency@cn.fujitsu.com>
Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Message-Id: <1476267508-19499-1-git-send-email-xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The NBD protocol doesn't have any notion of sectors, so it is
a fairly easy conversion to use byte-based read and write.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468624988-423-19-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Another step towards killing off sector-based block APIs.
While at it, call directly into nbd-client.c instead of having
a pointless trivial wrapper in nbd.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-14-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Now that NBD relies on the block layer to fragment things, we no
longer need to track an offset argument for which fragment of
a request we are actually servicing.
While at it, use true and false instead of 0 and 1 for a bool
parameter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468607524-19021-6-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Now that the block layer will honor max_transfer, we can simplify
our code to rely on that guarantee.
The readv code can call directly into nbd-client, just as the
writev code has done since commit 52a4650.
Interestingly enough, while qemu-io 'w 0 40m' splits into a 32M
and 8M transaction, 'w -z 0 40m' splits into two 16M and an 8M,
because the block layer caps the bounce buffer for writing zeroes
at 16M. When we later introduce support for NBD_CMD_WRITE_ZEROES,
we can get a full 32M zero write (or larger, if the client and
server negotiate that write zeroes can use a larger size than
ordinary writes).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468607524-19021-5-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.
Mostly done with the following semantic patch:
@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));
@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);
except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
