| Age | Commit message (Collapse) | Author |
|---|
|
This adds "remove_break" command which is the reverse of blkdebug
command "break": it removes all breakpoints with given tag and resumes
all the requests.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Make use of the error parameter in blkdebug_open.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
If the refcount of a refcount block is greater than one, we can at least
try to repair that problem by duplicating the affected block.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
It is unused now in all block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
The new parameter is unused yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!). Clean this up, and also
add missing inclusions of qemu-char.h itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This allows more systematic AIO testing. The patch adds three new
operations to blkdebug:
* Setting a "breakpoint" on a blkdebug event. The next request that
triggers this breakpoint is suspended and is tagged with a name.
The breakpoint is removed after a request has triggered it.
* A suspended request (identified by it's tag) can be resumed
* It's possible to check whether a suspended request with a given
tag exists. This can be used for waiting for an event.
Ideally, we would instead tag requests right when they are created and
set breakpoints for individual requests. However, at this point the
block layer doesn't allow this easily, and breakpoints that trigger for
any request already allow a lot of useful testing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The cleanup work to remove a rule depends on the type of the rule. It's
easy for the existing rules as there is no data that must be cleaned up
and is specific to a type yet, but the next patch will change this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
As soon as new rules can be set during runtime, as introduced by the
next patch, blkdebug makes sense even without a config file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore. Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Currently it is impossible to write a blkdebug script that ping-pongs
between two states, because the second set-state rule will use the
state that is set in the first. If you have
[set-state]
event = "..."
state = "1"
new_state = "2"
[set-state]
event = "..."
state = "2"
new_state = "1"
for example the state will remain locked at 1. This can be fixed
by first processing all rules, and then setting the state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This makes blkdebug scripts more powerful, and independent of the
exact sequence of operations performed by streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This prepares for the next patch, where some active rules may actually
not trigger depending on input to readv/writev. Store the active rules
in a SIMPLEQ (so that it can be emptied easily with QSIMPLEQ_INIT), and
fetch the errno/once/immediately arguments from there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is required when using blkdebug with raw format. Unlike qcow2/QED,
raw asks blkdebug for the length of the file, it doesn't get it from
a header.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
These are unused, except (by mistake more or less) in QED.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Most of the codebase as been converted to use glib memory allocation
functions. There are still a few instances of malloc/calloc in the
block layer and qemu-io. Replace them, especially since they do not
check the strdup/malloc/calloc return value.
Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block drivers now only need to provide either of .bdrv_co_flush,
.bdrv_aio_flush() or for legacy drivers .bdrv_flush(). Remove
the redundant .bdrv_flush() implementations.
[Paolo Bonzini: change raw driver to bdrv_co_flush]
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This changes bdrv_flush to return 0 on success and -errno in case of failure.
It's a requirement for implementing proper error handle in users of bdrv_flush.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
The signedness of enum types depend on the compiler implementation.
Therefore the check for negative values may or may not be meaningful.
Fix by explicitly casting to a signed integer.
Since the values are also checked earlier against event_names
table, this is an internal error. Change the 'if' to 'assert'.
This also avoids a warning with GCC flag -Wtype-limits.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
state = 0 in rules means that the rule is valid for any state. Therefore it's
impossible to have a rule that works only in the initial state. This changes
the initial state from 0 to 1 to make this possible.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Forgetting to free them means that the next instance inherits all rules and
gets its own rules only additionally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The list head was initialized to point to the wrong list, so all actions ended
up being handled as inject-error even if they were set-state in fact.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Move inclusion of stdbool.h to common header files, instead of including
in an ad-hoc manner.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Use container_of for one direction and &acb->common for the other one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Format drivers shouldn't need to bother with things like file names, but rather
just get an open BlockDriverState for the underlying protocol. This patch
introduces this behaviour for bdrv_open implementation. For protocols which
need to access the filename to open their file/device/connection/... a new
callback bdrv_file_open is introduced which doesn't get an underlying file
opened.
For now, also some of the more obscure formats use bdrv_file_open because they
open() the file themselves instead of using the block.c functions. They need to
be fixed in later patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds blkdebug events to qcow2 to allow injecting I/O errors in specific
places.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block drivers can trigger a blkdebug event whenever they reach a place where it
could be useful to inject an error for testing/debugging purposes.
Rules are read from a blkdebug config file and describe which action is taken
when an event is triggered. For now this is only injecting an error (with a few
options) or changing the state (which is an integer). Rules can be declared to
be active only in a specific state; this way later rules can distiguish on
which path we came to trigger their event.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add a mechanism to inject errors instead of passing requests on. With no
further patches applied, you can use it by setting inject_errno in gdb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This isn't doing anything interesting. It creates the blkdebug block driver as
a protocol which just passes everything through to raw.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
