| Age | Commit message (Collapse) | Author |
|---|
|
Since the introduction of a backup filter node in commit 00e30f05d, the
backup block job crashes when the target image is smaller than the
source image because it will try to write after the end of the target
node without having BLK_PERM_RESIZE. (Previously, the BlockBackend layer
would have caught this and errored out gracefully.)
We can fix this and even do better than the old behaviour: Check that
source and target have the same image size at the start of the block job
and unshare BLK_PERM_RESIZE. (This permission was already unshared
before the same commit 00e30f05d, but the BlockBackend that was used to
make the restriction was removed without a replacement.) This will
immediately error out when starting the job instead of only when writing
to a block that doesn't exist in the target.
Longer target than source would technically work because we would never
write to blocks that don't exist, but semantically these are invalid,
too, because a backup is supposed to create a copy, not just an image
that starts with a copy.
Fixes: 00e30f05de1d19586345ec373970ef4c192c6270
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1778593
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430142755.315494-4-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Hide structure definitions and add explicit API instead, to keep an
eye on the scope of the shared fields.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-10-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
backup-top "supports" write-unchanged, by skipping CBW operation in
backup_top_co_pwritev. But it forgets to do the same in
backup_top_co_pwrite_zeroes, as well as declare support for
BDRV_REQ_WRITE_UNCHANGED.
Fix this, and, while being here, declare also support for flags
supported by source child.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200207161231.32707-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
We can't access top after call bdrv_backup_top_drop, as it is already
freed at this time.
Also, no needs to unref target child by hand, it will be unrefed on
bdrv_close() automatically.
So, just do bdrv_backup_top_drop if append succeed and one bdrv_unref
otherwise.
Note, that in !appended case bdrv_unref(top) moved into drained section
on source. It doesn't really matter, but just for code simplicity.
Fixes: 7df7868b96404
Cc: qemu-stable@nongnu.org # v4.2.0
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20200121142802.21467-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
bdrv_open_driver() allocates bs->opaque according to drv->instance_size.
There is no need to allocate it and overwrite opaque in
bdrv_backup_top_append().
Reproducer:
$ QTEST_QEMU_BINARY=./x86_64-softmmu/qemu-system-x86_64 valgrind -q --leak-check=full tests/test-replication -p /replication/secondary/start
==29792== 24 bytes in 1 blocks are definitely lost in loss record 52 of 226
==29792== at 0x483AB1A: calloc (vg_replace_malloc.c:762)
==29792== by 0x4B07CE0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.7)
==29792== by 0x12BAB9: bdrv_open_driver (block.c:1289)
==29792== by 0x12BEA9: bdrv_new_open_driver (block.c:1359)
==29792== by 0x1D15CB: bdrv_backup_top_append (backup-top.c:190)
==29792== by 0x1CC11A: backup_job_create (backup.c:439)
==29792== by 0x1CD542: replication_start (replication.c:544)
==29792== by 0x1401B9: replication_start_all (replication.c:52)
==29792== by 0x128B50: test_secondary_start (test-replication.c:427)
...
Fixes: 7df7868b9640 ("block: introduce backup-top filter driver")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
All paths that lead to bdrv_backup_top_drop(), except for the call
from backup_clean(), imply that the BDS AioContext has already been
acquired, so doing it there too can potentially lead to QEMU hanging
on AIO_WAIT_WHILE().
An easy way to trigger this situation is by issuing a two actions
transaction, with a proper and a bogus blockdev-backup, so the second
one will trigger a rollback. This will trigger a hang with an stack
trace like this one:
#0 0x00007fb680c75016 in __GI_ppoll (fds=0x55e74580f7c0, nfds=1, timeout=<optimized out>,
timeout@entry=0x0, sigmask=sigmask@entry=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:39
#1 0x000055e743386e09 in ppoll (__ss=0x0, __timeout=0x0, __nfds=<optimized out>, __fds=<optimized out>)
at /usr/include/bits/poll2.h:77
#2 0x000055e743386e09 in qemu_poll_ns
(fds=<optimized out>, nfds=<optimized out>, timeout=<optimized out>) at util/qemu-timer.c:336
#3 0x000055e743388dc4 in aio_poll (ctx=0x55e7458925d0, blocking=blocking@entry=true)
at util/aio-posix.c:669
#4 0x000055e743305dea in bdrv_flush (bs=bs@entry=0x55e74593c0d0) at block/io.c:2878
#5 0x000055e7432be58e in bdrv_close (bs=0x55e74593c0d0) at block.c:4017
#6 0x000055e7432be58e in bdrv_delete (bs=<optimized out>) at block.c:4262
#7 0x000055e7432be58e in bdrv_unref (bs=bs@entry=0x55e74593c0d0) at block.c:5644
#8 0x000055e743316b9b in bdrv_backup_top_drop (bs=bs@entry=0x55e74593c0d0) at block/backup-top.c:273
#9 0x000055e74331461f in backup_job_create
(job_id=0x0, bs=bs@entry=0x55e7458d5820, target=target@entry=0x55e74589f640, speed=0, sync_mode=MIRROR_SYNC_MODE_FULL, sync_bitmap=sync_bitmap@entry=0x0, bitmap_mode=BITMAP_SYNC_MODE_ON_SUCCESS, compress=false, filter_node_name=0x0, on_source_error=BLOCKDEV_ON_ERROR_REPORT, on_target_error=BLOCKDEV_ON_ERROR_REPORT, creation_flags=0, cb=0x0, opaque=0x0, txn=0x0, errp=0x7ffddfd1efb0) at block/backup.c:478
#10 0x000055e74315bc52 in do_backup_common
(backup=backup@entry=0x55e746c066d0, bs=bs@entry=0x55e7458d5820, target_bs=target_bs@entry=0x55e74589f640, aio_context=aio_context@entry=0x55e7458a91e0, txn=txn@entry=0x0, errp=errp@entry=0x7ffddfd1efb0)
at blockdev.c:3580
#11 0x000055e74315c37c in do_blockdev_backup
(backup=backup@entry=0x55e746c066d0, txn=0x0, errp=errp@entry=0x7ffddfd1efb0)
at /usr/src/debug/qemu-kvm-4.2.0-2.module+el8.2.0+5135+ed3b2489.x86_64/./qapi/qapi-types-block-core.h:1492
#12 0x000055e74315c449 in blockdev_backup_prepare (common=0x55e746a8de90, errp=0x7ffddfd1f018)
at blockdev.c:1885
#13 0x000055e743160152 in qmp_transaction
(dev_list=<optimized out>, has_props=<optimized out>, props=0x55e7467fe2c0, errp=errp@entry=0x7ffddfd1f088) at blockdev.c:2340
#14 0x000055e743287ff5 in qmp_marshal_transaction
(args=<optimized out>, ret=<optimized out>, errp=0x7ffddfd1f0f8)
at qapi/qapi-commands-transaction.c:44
#15 0x000055e74333de6c in do_qmp_dispatch
(errp=0x7ffddfd1f0f0, allow_oob=<optimized out>, request=<optimized out>, cmds=0x55e743c28d60 <qmp_commands>) at qapi/qmp-dispatch.c:132
#16 0x000055e74333de6c in qmp_dispatch
(cmds=0x55e743c28d60 <qmp_commands>, request=<optimized out>, allow_oob=<optimized out>)
at qapi/qmp-dispatch.c:175
#17 0x000055e74325c061 in monitor_qmp_dispatch (mon=0x55e745908030, req=<optimized out>)
at monitor/qmp.c:145
#18 0x000055e74325c6fa in monitor_qmp_bh_dispatcher (data=<optimized out>) at monitor/qmp.c:234
#19 0x000055e743385866 in aio_bh_call (bh=0x55e745807ae0) at util/async.c:117
#20 0x000055e743385866 in aio_bh_poll (ctx=ctx@entry=0x55e7458067a0) at util/async.c:117
#21 0x000055e743388c54 in aio_dispatch (ctx=0x55e7458067a0) at util/aio-posix.c:459
#22 0x000055e743385742 in aio_ctx_dispatch
(source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at util/async.c:260
#23 0x00007fb68543e67d in g_main_dispatch (context=0x55e745893a40) at gmain.c:3176
#24 0x00007fb68543e67d in g_main_context_dispatch (context=context@entry=0x55e745893a40) at gmain.c:3829
#25 0x000055e743387d08 in glib_pollfds_poll () at util/main-loop.c:219
#26 0x000055e743387d08 in os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
#27 0x000055e743387d08 in main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
#28 0x000055e74316a3c1 in main_loop () at vl.c:1828
#29 0x000055e743016a72 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>)
at vl.c:4504
Fix this by not acquiring the AioContext there, and ensuring all paths
leading to it have it already acquired (backup_clean()).
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1782111
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When dropping backup-top, we need to drain the node before freeing the
BlockCopyState. Otherwise, requests may still be in flight and then the
assertion in shres_destroy() will fail.
(This becomes visible in intermittent failure of 056.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191219182638.104621-1-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Drop write notifiers and use filter node instead.
= Changes =
1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.
2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.
3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.
4. Block-copy is now using BdrvChildren instead of BlockBackends
5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.
= Iotest changes =
56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.
Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.
141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.
257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Backup-top filter caches write operations and does copy-before-write
operations.
The driver will be used in backup instead of write-notifiers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-5-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
