| Age | Commit message (Collapse) | Author |
|---|
|
This makes sure that the image we are streaming into is open in
read-write mode during the operation.
Operation blockers are also set in all intermediate nodes, since they
will be removed from the chain afterwards.
Finally, this also unblocks the stream operation in backing files.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When a BlockDriverState is about to be reopened it can trigger certain
operations that need to write to disk. During this process a different
block job can be woken up. If that block job completes and also needs
to call bdrv_reopen() it can happen that it needs to do it on the same
BlockDriverState that is still in the process of being reopened.
This can have fatal consequences, like in this example:
1) Block job A starts and sleeps after a while.
2) Block job B starts and tries to reopen node1 (a qcow2 file).
3) Reopening node1 means flushing and replacing its qcow2 cache.
4) While the qcow2 cache is being flushed, job A wakes up.
5) Job A completes and reopens node1, replacing its cache.
6) Job B resumes, but the cache that was being flushed no longer
exists.
This patch splits the bdrv_drain_all() call to keep all block jobs
paused during bdrv_reopen_multiple(), so that step 4 can never happen
and the operation is safe.
Note that this scenario can only happen if both bdrv_reopen() calls
are made by block jobs on the same backing chain. Otherwise there's no
chance that the same BlockDriverState appears in both reopen queues.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
aio_poll is not thread safe; for example bdrv_drain can hang if
the last in-flight I/O operation is completed in the I/O thread after
the main thread has checked bs->in_flight.
The bug remains latent as long as all of it is called within
aio_context_acquire/aio_context_release, but this will change soon.
To fix this, if bdrv_drain is called from outside the I/O thread,
signal the main AioContext through a dummy bottom half. The event
loop then only runs in the I/O thread.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-18-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
After the next patch bdrv_drain_all will have to be called without holding any
AioContext. Prepare to do this by adding an AioContext argument to
bdrv_reopen_multiple.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-15-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
The event currently only contains the BlockBackend name. However, with
anonymous BlockBackends, this is always the empty string. Add the qdev
ID (or if none was given, the QOM path) so that the user can still see
which device caused the event.
Event generation has to be moved from bdrv_eject() to the BlockBackend
because the BDS doesn't know the attached device, but that's easy
because blk_eject() is the only user of it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Recently we moved a few options from QemuOptsLists in blockdev.c to
bdrv_runtime_opts in block.c in order to make them accissble using
blockdev-add. However, this has the side effect that these options are
missing from query-command-line-options now, and libvirt consequently
disables the corresponding feature.
This problem was reported as a regression for the 'discard' option,
introduced in commit 818584a4. However, it is more general than that.
Fix it by adding bdrv_runtime_opts to the list of QemuOptsLists that are
returned in query-command-line-options. For the future, libvirt is
advised to use QMP schema introspection for block device options.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This enables its use for nested child nodes. The compatibility
between the 'discard' and 'detect-zeroes' setting is checked in
bdrv_open_common() now as the former setting isn't available before
calling bdrv_open() any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Amongst others, this means that you can now use the 'detect-zeroes'
option for non-top-level nodes in blockdev-add, like the QAPI schema
promises.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
bdrv_reopen_queue_child() assumes that a BlockDriverState is never
added twice to BlockReopenQueue.
That's however not the case: commit_start() adds 'base' (and its
children) to a new reopen queue, and then 'overlay_bs' (and its
children, which include 'base') to the same queue. The effect of this
is that the first set of options is ignored and overriden by the
second.
We fixed this by swapping the order in which both BDSs were added to
the queue in 3db2bd5508c86a1605258bc77c9672d93b5c350e. This patch
checks if a BDS is already in the reopen queue and keeps its options.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds the "read-only" option to the QDict. One important effect of
this change is that when a child inherits options from its parent, the
existing "read-only" mode can be preserved if it was explicitly set
previously.
This addresses scenarios like this:
[E] <- [D] <- [C] <- [B] <- [A]
In this case, if we reopen [D] with read-only=off, and later reopen
[B], then [D] will not inherit read-only=on from its parent during the
bdrv_reopen_queue_child() stage.
The BDRV_O_RDWR flag is not removed yet, but its keep in sync with the
value of the "read-only" option.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We're only doing this immediately before opening the image, but
bs->open_flags is used earlier in the function. At the moment this is
not causing problems because none of the checked flags are modified by
update_flags_from_options(), but this will change when we introduce
the "read-only" option.
This patch calls update_flags_from_options() at the beginning of the
function, immediately after creating the QemuOpts.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If an image is opened with snapshot=on, its flags are modified by
bdrv_backing_options() and then bs->open_flags is updated accordingly.
This last step is unnecessary if we calculate the new flags before
setting bs->open_flags.
Soon we'll introduce the "read-only" option, and then we'll need to
be able to modify its value in the QDict when snapshot=on. This is
more cumbersome if bs->options is already set. This patch simplifies
that. Other than that, there are no semantic changes. Although it
might seem that bs->options can have a different value now because
it is stored after calling bdrv_backing_options(), this call doesn't
actually modify them in this scenario.
The code that sets BDRV_O_ALLOW_RDWR is also moved for the same
reason.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is unnecessary and has been unused since 5433c24f0f9306c82ad9bcc.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Extend the current module interface to allow for block drivers to be
loaded dynamically on request. The only block drivers that can be
converted into modules are the drivers that don't perform any init
operation except for registering themselves.
In addition, only the protocol drivers are being modularized, as they
are the only ones which see significant performance benefits. The format
drivers do not generally link to external libraries, so modularizing
them is of no benefit from a performance perspective.
All the necessary module information is located in a new structure found
in module_block.h
This spoils the purpose of 5505e8b76f (block/dmg: make it modular).
Before this patch, if module build is enabled, block-dmg.so is linked to
libbz2, whereas the main binary is not. In downstream, theoretically, it
means only the qemu-block-extra package depends on libbz2, while the
main QEMU package needn't to. With this patch, we (temporarily) change
the case so that the main QEMU depends on libbz2 again.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-4-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Do a signed comparison against the length of
block_driver_modules[], so it will not cause a compile error when
empty]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Kashyap Chamarthy <kchamart@redhat.com>
Message-id: 1469602913-20979-2-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The builtin NBD server uses its own BlockBackend now instead of reusing
the monitor/guest device one.
This means that it has its own writethrough setting now. The builtin
NBD server always uses writeback caching now regardless of whether the
guest device has WCE enabled. qemu-nbd respects the cache mode given on
the command line.
We still need to keep a reference to the monitor BB because we put an
eject notifier on it, but we don't use it for any I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
All .bdrv_co_write_zeroes callbacks nowadays work perfectly even
with backing store attached. If future new callbacks would be unable to do
that - they have a chance to block this in bdrv_get_info().
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-6-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.
Mostly done with the following semantic patch:
@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));
@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);
except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
No code changes, just moved from one file to another.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Using int for values that are only used as booleans is confusing.
While at it, rearrange a couple of members so that all the bools
are contiguous.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
It makes more sense to have ALL block size limit constraints
in the same struct. Improve the documentation while at it.
Simplify a couple of conditionals, now that we have audited and
documented that request_alignment is always non-zero.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We want to eventually stick request_alignment alongside other
BlockLimits, but first, we must ensure it is populated at the
same time as all other limits, rather than being a special case
that is set only when a block is first opened.
Now that all drivers have been updated to supply an override
of request_alignment during their .bdrv_refresh_limits(), as
needed, the block layer itself can defer setting the default
alignment until part of the overall bdrv_refresh_limits().
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
into staging
Error reporting patches for 2016-06-20
# gpg: Signature made Mon 20 Jun 2016 15:56:15 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2016-06-20:
log: Fix qemu_set_log_filename() error handling
log: Fix qemu_set_dfilter_ranges() error reporting
log: Plug memory leak on multiple -dfilter
coccinelle: Remove unnecessary variables for function return value
error: Remove unnecessary local_err variables
error: Remove NULL checks on error_propagate() calls
vl: Error messages need to go to stderr, fix some
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
error_propagate() already ignores local_err==NULL, so there's no
need to check it before calling.
Coccinelle patch used to perform the changes added to
scripts/coccinelle/error_propagate_null.cocci.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
It's possible that an AioContext notifier user was close to finishing
when .detach_aio_context() or .attached_aio_context() is called. In
that case they may call bdrv_remove_aio_context_notifier() during the
callback.
Use safe iteration to avoid crashing when the notifier list is modified
during iteration. We must not only handle the case where the current
aio notifier is removed during a callback but also the one where any
other aio notifier is removed.
The next patch adds an AioContext notifier for block jobs and they
really could be terminating just as .detach_aio_context() is invoked.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1466096189-6477-6-git-send-email-stefanha@redhat.com
|
|
Currently, we are trying to move the backing BDS from the source to the
target in bdrv_replace_in_backing_chain() which is called from
mirror_exit(). However, mirror_complete() already tries to open the
target's backing chain with a call to bdrv_open_backing_file().
First, we should only set the target's backing BDS once. Second, the
mirroring block job has a better idea of what to set it to than the
generic code in bdrv_replace_in_backing_chain() (in fact, the latter's
conditions on when to move the backing BDS from source to target are not
really correct).
Therefore, remove that code from bdrv_replace_in_backing_chain() and
leave it to mirror_complete().
Depending on what kind of mirroring is performed, we furthermore want to
use different strategies to open the target's backing chain:
- If blockdev-mirror is used, we can assume the user made sure that the
target already has the correct backing chain. In particular, we should
not try to open a backing file if the target does not have any yet.
- If drive-mirror with mode=absolute-paths is used, we can and should
reuse the already existing chain of nodes that the source BDS is in.
In case of sync=full, no backing BDS is required; with sync=top, we
just link the source's backing BDS to the target, and with sync=none,
we use the source BDS as the target's backing BDS.
We should not try to open these backing files anew because this would
lead to two BDSs existing per physical file in the backing chain, and
we would like to avoid such concurrent access.
- If drive-mirror with mode=existing is used, we have to use the
information provided in the physical image file which means opening
the target's backing chain completely anew, just as it has been done
already.
If the target's backing chain shares images with the source, this may
lead to multiple BDSs per physical image file. But since we cannot
reliably ascertain this case, there is nothing we can do about it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-3-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
change_parent_backing_link() asserts that the BDS to be replaced is not
used as a backing file. However, we may want to replace a BDS by its
overlay in which case that very link should not be redirected.
For instance, when doing a sync=none drive-mirror operation, we may have
the following BDS/BB forest before block job completion:
target
base <- source <- BlockBackend
During job completion, we want to establish the source BDS as the
target's backing node:
target
|
v
base <- source <- BlockBackend
This makes the target a valid replacement for the source:
target <- BlockBackend
|
v
base <- source
Without this modification to change_parent_backing_link() we have to
inject the target into the graph before the source is its backing node,
thus temporarily creating a wrong graph:
target <- BlockBackend
base <- source
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-2-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
snapshot=on creates a temporary overlay that is always opened with
cache=unsafe (the cache mode specified by the user is only for the
actual image file and its children). This means that we must not inherit
the BDRV_O_NATIVE_AIO flag for the temporary overlay because trying to
use Linux AIO with cache=unsafe results in an error.
Reproducer without this patch:
$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,cache=none,aio=native,snapshot=on
qemu-system-x86_64: -drive file=/tmp/test.qcow2,cache=none,aio=native,snapshot=on: aio=native was
specified, but it requires cache.direct=on, which was not specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
It is always true for open images now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
If block drivers say that they can do an alignment < 512 bytes, let's
just suppose they mean it. raw-posix used to be an offender with respect
to this, but it can actually deal with byte-aligned requests now.
The default is still 512 bytes for any drivers that only implement
sector-based interfaces, but it is 1 now for drivers that implement
.bdrv_co_preadv.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
at least bdrv_co_preadv/pwritev expect this.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
So far, bdrv_close_all() first removed all root BlockDriverStates of
BlockBackends and monitor owned BDSes, and then assumed that the
remaining BDSes must be related to jobs and cancelled these jobs.
This order doesn't work that well any more when block jobs use
BlockBackends internally because then they will lose their BDS before
being cancelled.
This patch changes bdrv_close_all() to first cancel all jobs and then
remove all root BDSes from the remaining BBs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
When draining intermediate nodes (i.e. nodes that aren't the root node
for at least one of their parents; with node references, the user can
always configure the graph to create this situation), we need to
propagate the .drained_begin/end callbacks all the way up to the root
for the drain to be effective.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
|
|
When changing the BlockDriverState that a BdrvChild points to while the
node is currently drained, we must call the .drained_end() parent
callback. Conversely, when this means attaching a new node that is
already drained, we need to call .drained_begin().
bdrv_root_attach_child() takes now an opaque parameter, which is needed
because the callbacks must also be called if we're attaching a new child
to the BlockBackend when the root node is already drained, and they need
a way to identify the BlockBackend. Previously, child->opaque was set
too late and the callbacks would still see it as NULL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
|
|
This adds a common function that is called when attaching a new child to
a parent, removing a child from a parent and when reconfiguring the
graph so that an existing child points to a different node now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
|
|
bdrv_close() now asserts that the BDS's refcount is 0, therefore it
cannot have any parents and the bdrv_parent_cb_change_media() call is a
no-op.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The only caller of bdrv_close() left is bdrv_delete(). We may as well
assert that, in a way (there are some things in bdrv_close() that make
more sense under that assumption, such as the call to
bdrv_release_all_dirty_bitmaps() which in turn assumes that no frozen
bitmaps are attached to the BDS).
In addition, being called only in bdrv_delete() means that we can drop
bdrv_close()'s forward declaration at the top of block.c.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There are no callers to bdrv_open() or bdrv_open_inherit() left that
pass a pointer to a non-NULL BDS pointer as the first argument of these
functions, so we can finally drop that parameter and just make them
return the new BDS.
Generally, the following pattern is applied:
bs = NULL;
ret = bdrv_open(&bs, ..., &local_err);
if (ret < 0) {
error_propagate(errp, local_err);
...
}
by
bs = bdrv_open(..., errp);
if (!bs) {
ret = -EINVAL;
...
}
Of course, there are only a few instances where the pattern is really
pure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
It is unused now, so we may just as well drop it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If bdrv_open_inherit() creates a snapshot BDS and *pbs is NULL, that
snapshot BDS should be returned instead of the BDS under it.
This has worked so far because (nearly) all users of BDRV_O_SNAPSHOT use
blk_new_open() to create the BDS tree. bdrv_append() (which is called by
bdrv_append_temp_snapshot()) redirects pointers from parents (i.e. the
BB in this case) to the newly appended child (i.e. the overlay),
therefore, while bdrv_open_inherit() did not return the root BDS, the BB
still pointed to it.
The only instance where BDRV_O_SNAPSHOT is used but blk_new_open() is
not is in blockdev_init() if no BDS tree is created, and instead
blk_new() is used and the flags are stored in the BB root state.
However, qmp_blockdev_change_medium() filters the BDRV_O_SNAPSHOT flag
before invoking bdrv_open(), so it will not have any effect.
In any case, it would be nicer if bdrv_open_inherit() could just always
return the root of the BDS tree that has been created.
To this end, bdrv_append_temp_snapshot() now returns the snapshot BDS
instead of just appending it on top of the snapshotted BDS. Also, it
calls bdrv_ref() before bdrv_append() (which bdrv_open_inherit() has to
undo if not returning the overlay).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_append_temp_snapshot() uses bdrv_new() to create an empty BDS
before invoking bdrv_open() on that BDS. This is probably a relict from
when it used to do some modifications on that empty BDS, but now that is
unnecessary, so we can just set bs_snapshot to NULL and let bdrv_open()
do the rest.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The bdrv_next() users all leaked the BdrvNextIterator after completing
the iteration. Simply changing bdrv_next() to free the iterator before
returning NULL at the end of list doesn't work because some callers exit
the loop before looking at all BDSes.
This patch moves the BdrvNextIterator from the heap to the stack of
the caller and switches to a bdrv_first()/bdrv_next() interface for
initialising the iterator.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
|
|
Instead of propagating any change of a BDS's AioContext only to its file
and backing children and letting driver-specific code do the rest, just
propagate it to all and drop the thus superfluous implementations of
bdrv_{at,de}tach_aio_context() in Quorum, blkverify and VMDK.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch removes the remaining users of bs->blk, which will allow us
to have multiple BBs on top of a single BDS. In the meantime, all checks
that are currently in place to prevent the user from creating such
setups can be switched to bdrv_has_blk() instead of accessing BDS.blk.
Future patches can allow them and e.g. enable users to mirror to a block
device that already has a BlockBackend on it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
We need to introduce a separate BdrvNextIterator struct that can keep
more state than just the current BDS in order to avoid using the bs->blk
pointer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
In order to get rid of bs->blk for bdrv_get_device_name() and
bdrv_get_device_or_node_name(), ask all parents for their name and
simply pick the first one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
We want to get rid of BlockDriverState.blk in order to allow multiple
BlockBackends per BDS. Converting the device callbacks in block.c (which
assume a single BlockBackend) to per-child callbacks gets us rid of the
first few instances.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This reverts commit 76b223200ef4fb09dd87f0e213159795eb68e7a5.
Now that I/O throttling is fully done on the BlockBackend level, there
is no reason any more to block I/O throttling for nodes with multiple
parents as the parents don't influence each other any more.
Conflicts:
block.c
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
|
