| Age | Commit message (Collapse) | Author |
|---|
|
In an image chain, if the base image is smaller than the current
image, we need to make sure to use the current images count of
unallocated blocks once we get to the end of the base image. Without
this change the code will return 0 blocks when it gets to the end
of the base image and mirror_run will fail its assertion.
Signed-off-by: Vishvananda Ishaya <vishvananda@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is needed in the following patch.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.
Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Note that resetting bits in the dirty bitmap is done _before_ actually
processing the request. Writes, instead, set bits after the request
is completed.
This way, when there are concurrent write and discard requests, the
outcome will always be that the blocks are marked dirty. This scenario
should never happen, but it is safer to do it this way.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
bdrv_io_limits_enable() starts a new slice, but does not set io_base
correctly for that slice.
Here is how io_base is used:
bytes_base = bs->nr_bytes[is_write] - bs->io_base.bytes[is_write];
bytes_res = (unsigned) nb_sectors * BDRV_SECTOR_SIZE;
if (bytes_base + bytes_res <= bytes_limit) {
/* no wait */
} else {
/* operation needs to be throttled */
}
As a result, any I/O operations that are triggered between now and
bs->slice_end are incorrectly limited. If 10 MB of data has been
written since the VM was started, QEMU thinks that 10 MB of data has
been written in this slice. This leads to a I/O lockup in the guest.
We fix this by delaying the start of a new slice to the next
call of bdrv_exceed_io_limits().
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The qiov_is_aligned() function checks whether a QEMUIOVector meets a
BlockDriverState's alignment requirements. This is needed by
virtio-blk-data-plane so:
1. Move the function from block/raw-posix.c to block/block.c.
2. Make it public in block/block.h.
3. Rename to bdrv_qiov_is_aligned().
4. Change return type from int to bool.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
A blank CD or DVD is visible as a zero-sized disks. Probing such
disks will lead to an EIO and a failure to start the VM. Treating
them as raw is a better solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This allows removing of MinGW specific code and improves
reentrancy for POSIX hosts.
[Removed unused ret variable in qemu_get_timedate() to fix warning:
vl.c: In function ‘qemu_get_timedate’:
vl.c:451:16: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable]
-- Stefan Hajnoczi]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This makes the blkdebug suspend/resume functionality available in
qemu-io. Use it like this:
$ ./qemu-io blkdebug::/tmp/test.qcow2
qemu-io> break write_aio req_a
qemu-io> aio_write 0 4k
qemu-io> blkdebug: Suspended request 'req_a'
qemu-io> resume req_a
blkdebug: Resuming request 'req_a'
qemu-io> wrote 4096/4096 bytes at offset 0
4 KiB, 1 ops; 0:00:30.71 (133.359788 bytes/sec and 0.0326 ops/sec)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This commit adds an Error ** argument to bdrv_img_create() and set it
appropriately on error.
Callers of bdrv_img_create() pass NULL for the new argument and still
rely on bdrv_img_create()'s return value. Next commits will change
callers to use the Error object instead.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This fixes problems that are caused by the additional open/close cycle
of the existing format probing, for example related to qemu-nbd without
-t option or file descriptor passing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Instead of waiting for all requests to complete, wait just for the
specific request that should be cancelled.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The local string tmp_filename is passed to function get_tmp_filename
which expects a string with minimum size MAX_PATH for w32 hosts.
MAX_PATH is 260 and PATH_MAX is 259, so tmp_filename was too short.
Commit eba25057b9a5e19d10ace2bc7716667a31297169 introduced this
regression.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore. Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
AIO control blocks are frequently acquired and released because each aio
request involves at least one AIOCB. Therefore, we pool them to avoid
heap allocation overhead.
The problem with the freelist approach in AIOPool is thread-safety. If
we want BlockDriverStates to associate with AioContexts that execute in
multiple threads, then a global freelist becomes a problem.
This patch drops the freelist and instead uses g_slice_alloc() which is
tuned for per-thread fixed-size object pools. qemu_aio_get() and
qemu_aio_release() are now thread-safe.
Note that the change from g_malloc0() to g_slice_alloc() should be safe
since the freelist reuse case doesn't zero the AIOCB either.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
* kwolf/for-anthony: (32 commits)
osdep: Less restrictive F_SEFL in qemu_dup_flags()
qemu-iotests: add testcases for mirroring on-source-error/on-target-error
qmp: add pull_event function
mirror: add support for on-source-error/on-target-error
iostatus: forward block_job_iostatus_reset to block job
qemu-iotests: add mirroring test case
mirror: implement completion
qmp: add drive-mirror command
mirror: introduce mirror job
block: introduce BLOCK_JOB_READY event
block: add block-job-complete
block: rename block_job_complete to block_job_completed
block: export dirty bitmap information in query-block
block: introduce new dirty bitmap functionality
block: add bdrv_open_backing_file
block: add bdrv_query_stats
block: add bdrv_query_info
qemu-config: Add new -add-fd command line option
monitor: Prevent removing fd from set during init
monitor: Enable adding an inherited fd to an fd set
...
Conflicts:
vl.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Assert that write_compressed is never used with the dirty bitmap.
Setting the bits early is wrong, because a coroutine might concurrently
examine them and copy incomplete data from the source.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Mirroring runs without the backing file so that it can be copied outside
QEMU. However, we need to add it at the time the job is completed and
QEMU switches to the target. Factor out the common bits of opening an
image and completing a mirroring operation.
The new function does not assume that the file is closed immediately after
it returns failure, so it keeps the BDRV_O_NO_BACKING flag up-to-date.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qmp_query_blockstat cannot have errors, remove the Error argument and
create a new public function bdrv_query_stats out of it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Extract it out of the implementation of "info block".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Currently, bdrv_find_backing_image compares bs->backing_file with
what is passed in as a backing_file name. Mismatches may occur,
however, when bs->backing_file and backing_file are not both
absolute or relative.
Use path_combine() to make sure any relative backing filenames are
relative to the current image filename being searched, and then use
realpath() to make all comparisons based on absolute filenames.
If either backing_file or bs->backing_file is determine to be a
protocol, then no filename normalization is performed.
This also changes bdrv_find_backing_image to no longer be recursive,
but iterative.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The first user of close notifiers will be the embedded NBD server.
It would be possible to use them to do some of the ad hoc processing
(e.g. for block jobs and I/O limits) that is currently done by
bdrv_close.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no reason in principle to skip job cancellation and draining
of pending I/O when there is no medium in the disk. Do these unconditionally,
which also prepares the code for the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Also, use PATH_MAX, rather than the arbitrary 1024.
Using PATH_MAX is more consistent with other filename-related
variables in this file, like backing_filename and tmp_filename.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The following behaviors are possible:
'report': The behavior is the same as in 1.1. An I/O error,
respectively during a read or a write, will complete the job immediately
with an error code.
'ignore': An I/O error, respectively during a read or a write, will be
ignored. For streaming, the job will complete with an error and the
backing file will be left in place. For mirroring, the sector will be
marked again as dirty and re-examined later.
'stop': The job will be paused and the job iostatus will be set to
failed or nospace, while the VM will keep running. This can only be
specified if the block device has rerror=stop and werror=stop or enospc.
'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others.
In all cases, even for 'report', the I/O error is reported as a QMP
event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR.
It is possible that while stopping the VM a BLOCK_IO_ERROR event will be
reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa.
This is not really avoidable since stopping the VM completes all pending
I/O requests. In fact, it is already possible now that a series of
BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop
calls bdrv_drain_all and this can generate further errors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Move the common part of IDE/SCSI/virtio error handling to the block
layer. The new function bdrv_error_action subsumes all three of
bdrv_emit_qmp_error_event, vm_stop, bdrv_iostatus_set_err.
The same scheme will be used for errors in block jobs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Do this while we are touching this part of the code, before introducing
more uses of "int is_read".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This will let block-stream reuse the enum. Places that used the enums
are renamed accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We want to remove knowledge of BLOCK_ERR_STOP_ENOSPC from drivers;
drivers should only be told whether to stop/report/ignore the error.
On the other hand, we want to keep using the nicer BlockErrorAction
name in the drivers. So rename the enums, while leaving aside the
names of the enum values for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is a simple helper function, that will return the base image
of a given image chain.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add bdrv_find_overlay(), and bdrv_drop_intermediate().
bdrv_find_overlay(): given 'bs' and the active (topmost) BDS of an image chain,
find the image that is the immediate top of 'bs'
bdrv_drop_intermediate():
Given 3 BDS (active, top, base), drop images above
base up to and including top, and set base to be the
backing file of top's overlay node.
E.g., this converts:
bottom <- base <- intermediate <- top <- active
to
bottom <- base <- active
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The keep_read_only flag is no longer used, in favor of the bdrv
flag BDRV_O_ALLOW_RDWR.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Currently, bdrv_commit() reopens images r/w itself, via risky
_delete() and _open() calls. Use the new safe method for drive reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is based on Supriya Kannery's bdrv_reopen() patch series.
This provides a transactional method to reopen multiple
images files safely.
Image files are queue for reopen via bdrv_reopen_queue(), and the
reopen occurs when bdrv_reopen_multiple() is called. Changes are
staged in bdrv_reopen_prepare() and in the equivalent driver level
functions. If any of the staged images fails a prepare, then all
of the images left untouched, and the staged changes for each image
abandoned.
Block drivers are passed a reopen state structure, that contains:
* BDS to reopen
* flags for the reopen
* opaque pointer for any driver-specific data that needs to be
persistent from _prepare to _commit/_abort
* reopen queue pointer, if the driver needs to queue additional
BDS for a reopen
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_set_enable_write_cache() sets the bs->enable_write_cache flag,
but without the flag recorded in bs->open_flags, then next time
a reopen() is performed the enable_write_cache setting may be
inadvertently lost.
This will set the flag in open_flags, so it is preserved across
reopens.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
I believe the bs->keep_read_only flag is supposed to reflect
the initial open state of the device. If the device is initially
opened R/O, then commit operations, or reopen operations changing
to R/W, are prohibited.
Currently, the keep_read_only flag is only accurate for the active
layer, and its backing file. Subsequent images end up always having
the keep_read_only flag set.
For instance, what happens now:
[ base ] kro = 1, ro = 1
|
v
[ snap-1 ] kro = 1, ro = 1
|
v
[ snap-2 ] kro = 0, ro = 1
|
v
[ active ] kro = 0, ro = 0
What we want:
[ base ] kro = 0, ro = 1
|
v
[ snap-1 ] kro = 0, ro = 1
|
v
[ snap-2 ] kro = 0, ro = 1
|
v
[ active ] kro = 0, ro = 0
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The caller would not delete temporary file after failed get_tmp_filename().
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
