aboutsummaryrefslogtreecommitdiff
path: root/audio
AgeCommit message (Collapse)Author
2010-10-03Use GCC_FMT_ATTR (format checking)Stefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-03Replace most gcc format attributes by macro GCC_FMT_ATTR (format checking)Stefan Weil
Since version 4.4.x, gcc supports additional format attributes. __attribute__ ((format (gnu_printf, 1, 2))) should be used instead of __attribute__ ((format (printf, 1, 2)) because QEMU always uses standard format strings (even with mingw32). The patch replaces format attribute printf / __printf__ by macro GCC_FMT_ATTR which uses gnu_printf if supported. It also removes an #ifdef __GNUC__ (not needed any longer). Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-29pulse-audio: fix bug on updating rposWu Fengguang
Fix a rpos coordination bug between qpa_run_out() and qpa_thread_out(), which shows up as playback noises. qpa_run_out() qpa_thread_out loop N critical section 1 qpa_run_out() qpa_thread_out loop N doing pa_simple_write() qpa_run_out() qpa_thread_out loop N doing pa_simple_write() qpa_thread_out loop N critical section 2 qpa_thread_out loop N+1 critical section 1 qpa_run_out() qpa_thread_out loop N+1 doing pa_simple_write() In the above scheme, "qpa_thread_out loop N+1 critical section 1" will get the same rpos as the one used by "qpa_thread_out loop N critical section 1". So it will be reading dead samples from the old rpos. The rpos can only be updated back to qpa_thread_out when there is a qpa_run_out() run between two qpa_thread_out loops. normal sequence: qpa_thread_out: hw->rpos (X0) => local rpos => pa->rpos (X1) qpa_run_out: pa->rpos (X1) => hw->rpos (X1) qpa_thread_out: hw->rpos (X1) => local rpos => pa->rpos (X2) buggy sequence: qpa_thread_out: hw->rpos (X0) => local rpos => pa->rpos (X1) qpa_thread_out: hw->rpos (X0) => local rpos => pa->rpos (X1') Obviously qpa_run_out() shall be called at least once between any two qpa_thread_out loops (after pa->rpos is set), in order for the new qpa_thread_out loop to see the updated rpos. Setting pa->live to 0 does the trick. The next loop will have to wait for one qpa_run_out() invocation in order to get a non-zero pa->live and proceed. Signed-off-by: malc <av1474@comtv.ru> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2010-09-28audio: Fix memory size for resampling buffer in DAC casemalc
Signed-off-by: malc <av1474@comtv.ru>
2010-09-22Move macros GCC_ATTR and GCC_FMT_ATTR to common header fileStefan Weil
By moving the definition of GCC_ATTR and GCC_FMT_ATTR from audio_int.h to qemu-common.h these macros are now generally available for further patches which add the gcc format attribute. Newer gcc versions support format gnu_printf which is better suited for use in QEMU than format printf (QEMU always uses standard format strings (even with mingw32)). V2: Use correct operator '==' (instead of '=') Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-07audio/sdl: return on errormalc
Signed-off-by: malc <av1474@comtv.ru>
2010-08-06audio/sdl: be more anal about errorsmalc
Signed-off-by: malc <av1474@comtv.ru>
2010-08-06audio: make audio_pt_init block all signalsmalc
Signed-off-by: malc <av1474@comtv.ru>
2010-07-06savevm: Add DeviceState paramAlex Williamson
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-22Fix %lld or %llx printf format useBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-22audio/sdlaudio: remove unused variableSerge Ziryukin
Remove unused 'shift' variable spotted by clang. Also clean up aud_to_sdlfmt which used to get the value of shift. Signed-off-by: Serge Ziryukin <ftrvxmtrx@gmail.com> Signed-off-by: malc <av1474@comtv.ru>
2010-04-21audio/alsa: Avoid snd_pcm_format_t vs audfmt_e mixupmalc
Spotted by Serge Ziryukin and based on his patch, thanks. Signed-off-by: malc <av1474@comtv.ru>
2010-03-16monitor: Separate "default monitor" and "current monitor" cleanlyMarkus Armbruster
Commits 376253ec..731b0364 introduced global variable cur_mon, which points to the "default monitor" (if any), except during execution of monitor_read() or monitor_control_read() it points to the monitor from which we're reading instead (the "current monitor"). Monitor command handlers run within monitor_read() or monitor_control_read(). Default monitor and current monitor are really separate things, and squashing them together is confusing and error-prone. For instance, usb_host_scan() can run both in "info usbhost" and periodically via usb_host_auto_check(). It prints to cur_mon, which is what we want in the former case: the monitor executing "info usbhost". But since that's the default monitor in the latter case, it periodically spams the default monitor there. A few places use cur_mon to log stuff to the default monitor. If we ever log something while cur_mon points to current monitor instead of default monitor, the log temporarily "jumps" to another monitor. Whether that can or cannot happen isn't always obvious. Maybe logging to the default monitor (which may not even exist) is a bad idea, and we should log to stderr or a logfile instead. But that's outside the scope of this commit. Change cur_mon to point to the current monitor. Create new default_mon to point to the default monitor. Update users of cur_mon accordingly. This fixes the periodical spamming of the default monitor by usb_host_scan(). It also stops "log jumping", should that problem exist.
2010-03-11audio: fix commentmalc
Signed-off-by: malc <av1474@comtv.ru>
2010-02-28audio/alsa: Handle SND_PCM_STATE_SETUP in alsa_poll_handlermalc
Signed-off-by: malc <av1474@comtv.ru>
2010-02-28audio/alsa: Spelling typo (paramters)Vagrant Cascadian
Trivial patch to fix the spelling of "parameters". Signed-off-by: malc <av1474@comtv.ru>
2010-01-17audio: include more information into audio_bug's outputmalc
Signed-off-by: malc <av1474@comtv.ru>
2010-01-17Revert "sdlaudio: make it suck less"malc
This reverts commit 4839abe78fd466a3cf06faa7c362154afd5404f1. The commit was badly broken, Gentoo has sdl as the default driver, consequently 5 gentoo users have hit the breakage and were kind enough to report, so thank you: Claes Gyllenswrd vekin Chris But above all thanks to Toralf Foerster who actually provied enough information to pinpoint the breakage to sdlaudio. http://bugs.gentoo.org/show_bug.cgi?id=294269
2010-01-13Workaround for broken OSS_GETVERSION on FreeBSD, part twoJuergen Lock
Turns out on those versions of FreeBSD (>= 7.x) that know OSS_GETVERSION the ioctl doesn't actually work yet (except in the Linuxolator), so if building on FreeBSD assume the sound drivers are new enough if the ioctl returns the errno it does currently on FreeBSD. (Rev 2 after private discussion with malc.) Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: malc <av1474@comtv.ru>
2010-01-09oss: fix fragment settingmalc
Previous patch introduced subtle regression, in cases when OSS_GETVERSION fails the code wasn't falling back to SNDCTL_DSP_SETFRAGMENT. Signed-off-by: malc <av1474@comtv.ru>
2010-01-09oss: issue OSS_GETVERSION ioctl only when neededmalc
Signed-off-by: malc <av1474@comtv.ru>
2010-01-09oss: refactor code around policy settingmalc
This fixes a problem with a previous patch spotted by Juergen Lock, thanks to him again. Signed-off-by: malc <av1474@comtv.ru>
2010-01-08oss: workaround for cases when OSS_GETVERSION is not definedmalc
Thanks to Juergen Lock. Signed-off-by: malc <av1474@comtv.ru>
2009-12-03audio: port to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03audio: fix compilation of DEBUG_PLIVEJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-18audio: Remove conditional around sw which can not be NULLmalc
Noticed by Steve Grubb. Signed-off-by: malc <av1474@comtv.ru>
2009-10-15winwave: ADC supportmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-15audio: remove last remnants of _tmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-15winwave: make error logging more consistentmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-15winwave: follow the rules when closing the output devicemalc
a. call waveOutReset to drain the queue b. unprepare headers before freeing underlying memory Signed-off-by: malc <av1474@comtv.ru>
2009-10-13qemu: allow pulseaudio to be the defaultMichael S. Tsirkin
We're seeing various issues with the SDL audio backend and want to switch to the pulseaudio backend. See e.g. https://bugzilla.redhat.com/495964 https://bugzilla.redhat.com/519540 https://bugzilla.redhat.com/496627 The pulseaudio backend seems to work well, so we should allow it to be selected as the default. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2009-10-11winwave: pause/restore playing upon seeing VOICE_DISABLE/ENABLEmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-11winwave: close event handle and delete wait object after closing HWAVEOUTmalc
To avoid possibly being called back and thus racing. Signed-off-by: malc <av1474@comtv.ru>
2009-10-11winwave: remove wait object when finalizing DAC voicemalc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-10winwave: poll modemalc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-10Windows Waveform Audio driver (no ADC support yet)malc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-03oss/alsa: Do not invoke UB described in 7.15.1.1 (this time for ADC)malc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-02alsa: Change default buffer/period sizemalc
Increase buffer size but do not rely on ALSA picking up default period size. Signed-off-by: malc <av1474@comtv.ru>
2009-10-02oss/alsa: Do not invoke UB described in 7.15.1.1malc
Additional argument (whether to try poll mode) is only passed with VOICE_ENABLE command. Thanks to Markus Armbruster for noticing the potential breakage.
2009-09-30sdlaudio: make it suck lessmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-09-18audio: use correct email addressmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-09-18audio: internal API changemalc
pcm_ops.run_out now takes number of live samples (which will be always greater than zero) as a second argument, every driver was calling audio_pcm_hw_get_live_out anyway with exception of fmod which used audio_pcm_hw_get_live_out2 for no good reason. Signed-off-by: malc <av1474@comtv.ru>
2009-09-18sdlaudio: use correct function names in sdl_XXX callsmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-09-18oss: use audio_pcm_hw_clip_outmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-09-18alsa: use audio_pcm_hw_clip_outmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-09-18audio: introduce audio_pcm_hw_clip_out helper functionmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-09-18audio: use muldiv64 where it makes sensemalc
Signed-off-by: malc <av1474@comtv.ru>
2009-09-18coreaudio: fix sloppy "posixification" by ↵malc
1ea879e5580f63414693655fcf0328559cdce138 Signed-off-by: malc <av1474@comtv.ru>
2009-09-14alsa: Use proper value when testing returned events in alsa_poll_handlermalc
Signed-off-by: malc <av1474@comtv.ru>
2009-09-14alsa/oss: Remove fd transfer handlers before closing oss/alsa fd/handlemalc
Signed-off-by: malc <av1474@comtv.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 20:33:04 +0000