aboutsummaryrefslogtreecommitdiff
path: root/audio/wavaudio.c
AgeCommit message (Collapse)Author
2022-10-11audio: swap audio_rate_get_bytes() function parametersVolker Rümelin
Swap the rate and info parameters of the audio_rate_get_bytes() function to align the parameter order with the rest of the audio_rate_*() functions. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220923183640.8314-8-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-03-04audio: restore mixing-engine playback buffer sizeVolker Rümelin
Commit ff095e5231 "audio: api for mixeng code free backends" introduced another FIFO for the audio subsystem with exactly the same size as the mixing-engine FIFO. Most audio backends use this generic FIFO. The generic FIFO used together with the mixing-engine FIFO doubles the audio FIFO size, because that's just two independent FIFOs connected together in series. For audio playback this nearly doubles the playback latency. This patch restores the effective mixing-engine playback buffer size to a pre v4.2.0 size by only accepting the amount of samples for the mixing-engine queue which the downstream queue accepts. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20220301191311.26695-10-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-31audio: fix bug 1858488Volker Rümelin
The combined generic buffer management code and buffer run out code in function audio_generic_put_buffer_out has a problematic behaviour. A few hundred milliseconds after playback starts the mixing buffer and the generic buffer are nearly full and the following pattern can be seen. On first call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but the generic buffer will fill faster and is full when audio_pcm_hw_run_out returns. This is because emulated audio devices can produce playback data at a higher rate than the audio backend hardware consumes this data. On next call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but no audio data is transferred to the generic buffer because the buffer is already full. Then the pattern repeats. For the emulated audio device this looks like the audio timer period has doubled. This patch splits the combined generic buffer management code and buffer run out code and calls the buffer run out code after buffer management code to break this pattern. The bug report is for the wav audio backend. But the problem is not limited to this backend. All audio backends which use the audio_generic_put_buffer_out function show this problem. Buglink: https://bugs.launchpad.net/qemu/+bug/1858488 Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20200123074943.6699-5-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-10-18audio: replace shift in audio_pcm_info with bytes_per_frameKővágó, Zoltán
The bit shifting trick worked because the number of bytes per frame was always a power-of-two (since QEMU only supports mono, stereo and 8, 16 and 32 bit samples). But if we want to add support for surround sound, this no longer holds true. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: 1351fd9bcce0ff20d81850c5292722194329de02.1570996490.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-09-23audio: split ctl_* functions into enable_* and volume_*Kővágó, Zoltán
This way we no longer need vararg functions, improving compile time error detection. Also now it's possible to check actually what commands are supported, without needing to manually update ctl_caps. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: 2b08b3773569c5be055d0a0fb2f29ff64e79f0f4.1568927990.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-09-23audio: common rate control code for timer based outputsKővágó, Zoltán
This commit removes the ad-hoc rate-limiting code from noaudio and wavaudio, and replaces them with a (slightly modified) code from spiceaudio. This way multiple write calls (for example when the circular buffer wraps around) do not cause problems. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: fd0fe5b95b13fa26d09ae77a72f99d0ea411de14.1568927990.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-09-23wavaudio: port to the new audio backend apiKővágó, Zoltán
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: eede77aeb9c17b379948b0b6d2ac10f45d74fa62.1568927990.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21audio: use size_t where makes senseKővágó, Zoltán
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: c5193e687fc6cc0f60cb3e90fe69ddf2027d0df1.1566168923.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21audio: remove read and write pcm_opsKővágó, Zoltán
They just called audio_pcm_sw_read/write anyway, so it makes no sense to have them too. (The noaudio's read is the only exception, but it should work with the generic code too.) Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: 92ddc98133bc4b687c6e4608b9321e7b64c0e496.1566168923.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21audio: remove audio_MIN, audio_MAXKővágó, Zoltán
There's already a MIN and MAX macro in include/qemu/osdep.h, use them instead. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 303222477df6f7373217e0df768635fab5855745.1566168923.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-11wavaudio: port to -audiodev configKővágó, Zoltán
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: 28c2bf374c447c20937a192695c7b9f5367dea7e.1552083282.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11audio: -audiodev command line option basic implementationKővágó, Zoltán
Audio drivers now get an Audiodev * as config paramters, instead of the global audio_option structs. There is some code in audio/audio_legacy.c that converts the old environment variables to audiodev options (this way backends do not have to worry about legacy options). It also contains a replacement of -audio-help, which prints out the equivalent -audiodev based config of the currently specified environment variables. Note that backends are not updated and still rely on environment variables. Also note that (due to moving try-poll from global to backend specific option) currently ALSA and OSS will always try poll mode, regardless of environment variables or -audiodev options. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: e99a7cbdac0d13512743880660b2032024703e4c.1552083282.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11audio: use qapi AudioFormat instead of audfmt_eKővágó, Zoltán
I had to include an enum for audio sampling formats into qapi, but that meant duplicating the audfmt_e enum. This patch replaces audfmt_e and associated values with the qapi generated AudioFormat enum. This patch is mostly a search-and-replace, except for switches where the qapi generated AUDIO_FORMAT_MAX caused problems. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-03-12audio: add driver registryGerd Hoffmann
Add registry for audio drivers, using the existing audio_driver struct. Make all drivers register themself. The old list of audio_driver struct pointers is now a list of audio driver names, specifying the priority (aka probe order) in case no driver is explicitly asked for. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180306074053.22856-2-kraxel@redhat.com
2018-02-06audio: Replace AUDIO_FUNC with __func__Alistair Francis
Apparently we don't use __MSC_VER as a compiler anymore and we always require a C99 compiler (which means we always have __func__) so we don't need a special AUDIO_FUNC macro. We can just replace AUDIO_FUNC with __func__ instead. Checkpatch failures were manually fixed. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-2-armbru@redhat.com>
2016-05-19qemu-common: stop including qemu/host-utils.h from qemu-common.hPaolo Bonzini
Move it to the actual users. There are some inclusions of qemu/host-utils.h in headers, but they are all necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22Replaced get_tick_per_sec() by NANOSECONDS_PER_SECONDRutuja Shah
This patch replaces get_ticks_per_sec() calls with the macro NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec() is then removed. This replacement improves the readability and understandability of code. For example, timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50)); NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns matches the unit of the expression on the right side of the plus. Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-02audio: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453138432-8324-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15wavaudio: do not use global variablesKővágó, Zoltán
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15audio: expose drv_opaque to init_out and init_inKővágó, Zoltán
Currently the opaque pointer returned by audio_driver's init is only exposed to the driver's fini, but not to audio_pcm_ops. This way if someone wants to share a variable with the driver and the pcm, he must use global variables. This patch fixes it by adding a third parameter to audio_pcm_op's init_out and init_in. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-09-20wavaudio: Use stdio instead of QEMUFileJuan Quintela
QEMUFile * is only intended for migration nowadays. Using it for anything else just adds pain and a layer of buffers for no good reason. Signed-off-by: Juan Quintela <quintela@redhat.com> CC: malc <av1474@comtv.ru> Signed-off-by: malc <av1474@comtv.ru>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2009-09-18audio: internal API changemalc
pcm_ops.run_out now takes number of live samples (which will be always greater than zero) as a second argument, every driver was calling audio_pcm_hw_get_live_out anyway with exception of fmod which used audio_pcm_hw_get_live_out2 for no good reason. Signed-off-by: malc <av1474@comtv.ru>
2009-09-18audio: use muldiv64 where it makes sensemalc
Signed-off-by: malc <av1474@comtv.ru>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-11Aestheticsmalc
Reformat to make item borders more visible Fix cases of stray tabs and vertical misalignments Signed-off-by: malc <av1474@comtv.ru>
2009-08-11use C99 initializers for all audio/*Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2009-08-11use C99 initializers for audio_pcm_opsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2009-08-11Use C99 initializers for audio_optionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2009-08-11Use proper struct initializers and remove INIT_FIELD() macroJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2008-12-03Make audio violate POSIX lessmalc
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5864 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-06Prepare for changing audio_pcm_ops dynamically (partially revert r5422)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5435 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-05Make audio_pcm_opsstatic constblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5422 c046a42c-6fe2-441c-8c8c-71466251a162
2008-01-14pthreads-based audio and miscellaneous audio clean-up (malc).balrog
ESD support (malc, Frederick Reeve). git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3917 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-02-17Qemu support for S32 and U32 alsa output, by Vassili Karpov.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2427 c046a42c-6fe2-441c-8c8c-71466251a162
2006-08-05use QEMUFile APIbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2087 c046a42c-6fe2-441c-8c8c-71466251a162
2006-07-04audio endianness API changes (malc)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2042 c046a42c-6fe2-441c-8c8c-71466251a162
2006-07-04audio fixes + initial audio capture support (malc)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2040 c046a42c-6fe2-441c-8c8c-71466251a162
2005-11-20wav finalization fix (malc)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1634 c046a42c-6fe2-441c-8c8c-71466251a162
2005-11-05audio merge (malc)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1601 c046a42c-6fe2-441c-8c8c-71466251a162
2005-10-30merged 15a_aqemu.patch audio patch (malc)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1584 c046a42c-6fe2-441c-8c8c-71466251a162
2004-11-11audio fixes (malc)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1133 c046a42c-6fe2-441c-8c8c-71466251a162
2004-11-09audio clean up (initial patch by malc)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1131 c046a42c-6fe2-441c-8c8c-71466251a162
2004-11-07audio merge (malc)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1125 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 02:16:14 +0000