aboutsummaryrefslogtreecommitdiff
path: root/arch_init.c
AgeCommit message (Collapse)Author
2012-12-20ram: refactor ram_save_block() return valueJuan Quintela
It could only return 0 if we only found dirty xbzrle pages that hadn't changed (i.e. they were written with the same content). We don't care about that case, it is the same than nothing dirty. So now the return of the function is how much have it written, nothing else. Adjust callers. And we also made ram_save_iterate() return the number of transferred bytes, not the number of transferred pages. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20ram: account the amount of transferred ram betterJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20ram: optimize migration bitmap walkingJuan Quintela
Instead of testing each page individually, we search what is the next dirty page with a bitmap operation. We have to reorganize the code to move from a "for" loop, to a while(dirty) loop. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20ram: Use memory_region_test_and_clear_dirtyJuan Quintela
This avoids having to do two walks over the dirty bitmap, once reading the dirty bits, and anthoer cleaning them. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20ram: Add last_sent_blockJuan Quintela
This is the last block from where we have sent data. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20ram: rename last_block to last_seen_blockJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20savevm: New save live migration method: pendingJuan Quintela
Code just now does (simplified for clarity) if (qemu_savevm_state_iterate(s->file) == 1) { vm_stop_force_state(RUN_STATE_FINISH_MIGRATE); qemu_savevm_state_complete(s->file); } Problem here is that qemu_savevm_state_iterate() returns 1 when it knows that remaining memory to sent takes less than max downtime. But this means that we could end spending 2x max_downtime, one downtime in qemu_savevm_iterate, and the other in qemu_savevm_state_complete. Changed code to: pending_size = qemu_savevm_state_pending(s->file, max_size); DPRINTF("pending size %lu max %lu\n", pending_size, max_size); if (pending_size >= max_size) { ret = qemu_savevm_state_iterate(s->file); } else { vm_stop_force_state(RUN_STATE_FINISH_MIGRATE); qemu_savevm_state_complete(s->file); } So what we do is: at current network speed, we calculate the maximum number of bytes we can sent: max_size. Then we ask every save_live section how much they have pending. If they are less than max_size, we move to complete phase, otherwise we do an iterate one. This makes things much simpler, because now individual sections don't have to caluclate the bandwidth (it was implossible to do right from there). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-20protect the ramlist with a separate mutexUmesh Deshpande
Add the new mutex that protects shared state between ram_save_live and the iothread. If the iothread mutex has to be taken together with the ramlist mutex, the iothread shall always be _outside_. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Umesh Deshpande <udeshpan@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2012-12-20add a version number to ram_listUmesh Deshpande
This will be used to detect if last_block might have become invalid across different calls to ram_save_live. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Umesh Deshpande <udeshpan@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2012-12-20exec: sort the memory from biggest to smallestPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20exec: change RAM list to a TAILQPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20exec: change ramlist from MRU order to a 1-item cachePaolo Bonzini
Most of the time, only 2 items will be active (from/to for a string operation, or code/data). But TCG guests likely won't have gigabytes of memory, so this actually goes down to 1 item. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20migration: fix migration_bitmap leakPaolo Bonzini
Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: do not include net.h everywherePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: do not rely on indirect inclusions of or from qemu-char.hPaolo Bonzini
Various header files rely on qemu-char.h including qemu-config.h or main-loop.h, but they really do not need qemu-char.h at all (particularly interesting is the case of the block layer!). Clean this up, and also add missing inclusions of qemu-char.h itself. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17Merge commit '1dd3a74d2ee2d873cde0b390b536e45420b3fe05' into HEADPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: update all users to look in pci/Michael S. Tsirkin
update all users so we can remove the makefile hack. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-12migration: Fix madvise breakage if host and guest have different page sizesDavid Gibson
madvise(DONTNEED) will throw away the contents of the whole page at the given address, even if the given length is less than the page size. One can argue about whether that's the correct behaviour, but that's what it's done for a long time in Linux at least. That means that the madvise() in ram_load(), on a setup where TARGET_PAGE_SIZE is smaller than the host page size, can throw away data in guest pages adjacent to the one it's actually processing right now, leading to guest memory corruption on an incoming migration. This patch therefore, disables the madvise() if the host page size is larger than TARGET_PAGE_SIZE. This means we don't get the benefits of that madvise() in this case, but a more complete fix is more difficult to accomplish. This at least fixes the guest memory corruption. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-12Fix off-by-1 error in RAM migration codeDavid Gibson
The code for migrating (or savevm-ing) memory pages starts off by creating a dirty bitmap and filling it with 1s. Except, actually, because bit addresses are 0-based it fills every bit except bit 0 with 1s and puts an extra 1 beyond the end of the bitmap, potentially corrupting unrelated memory. Oops. This patch fixes it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-17migration: Add dirty_pages_rate to query migrate outputJuan Quintela
It indicates how many pages were dirtied during the last second. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17Separate migration bitmapJuan Quintela
This patch creates a migration bitmap, which is periodically kept in sync with the qemu bitmap. A separate copy of the dirty bitmap for the migration limits the amount of concurrent access to the qemu bitmap from iothread and migration thread (which requires taking the big lock). We use the qemu bitmap type. We have to "undo" the dirty_pages counting optimization on the general dirty bitmap and do the counting optimization with the migration local bitmap. Signed-off-by: Umesh Deshpande <udeshpan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17ram: create trace event for migration sync bitmapJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17ram: introduce migration_bitmap_sync()Juan Quintela
Helper that we use each time that we need to syncronize the migration bitmap with the other dirty bitmaps. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17ram: Introduce migration_bitmap_test_and_reset_dirty()Juan Quintela
It just test if the dirty bit is set, and clears it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2012-10-17ram: introduce migration_bitmap_set_dirty()Juan Quintela
It just marks a region of memory as dirty. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2012-10-17savevm: Factorize ram globals reset in its own functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2012-10-17migration: print expected downtime in info migrateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17migration: rename expected_time to expected_downtimeJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2012-10-17fix migration syncJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-21Eliminate cpus-x86_64.conf fileEduardo Habkost
This file is not needed anymore, as QEMU won't ship any config-based cpudefs out of the box, relying only on the builtin CPU models. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-19arch_init.c: Improve '-soundhw help' for non-HAS_AUDIO_CHOICE archsPeter Maydell
For architectures which don't set HAS_AUDIO_CHOICE, improve the '-soundhw help' message so that it doesn't simply print an empty list, implying no sound support at all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: malc <av1474@comtv.ru>
2012-09-14arch_init.c: add missing '%' symbols before PRIu64 in debug printfsIgor Mitsyanko
'%' symbols were missing in front of PRIu64 macros in DPRINTF() messages in arch_init.c, this caused compilation warnings when compiled with DEBUG_ARCH_INIT defined. Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-08-22qapi: add 'query-target' command to return target archDaniel P. Berrange
Add a 'query-target' QAPI command to allow management applications to determine what target architecture a QEMU binary is emulating without having to parse the binary name or -help output $ qmp-shell -p /tmp/qemu (QEMU) query-target { u'return': { u'arch': u'x86_64' }} Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-13Merge remote-tracking branch 'quintela/migration-next-20120808' into stagingAnthony Liguori
* quintela/migration-next-20120808: Restart optimization on stage3 update version Add XBZRLE statistics Add migration accounting for normal and duplicate pages Change total_time to total-time in MigrationStats Add migrate_set_cache_size command Add XBZRLE to ram_save_block and ram_save_live Add xbzrle_encode_buffer and xbzrle_decode_buffer functions Add uleb encoding/decoding functions Add cache handling functions Add XBZRLE documentation Add migrate-set-capabilities Add migration capabilities
2012-08-11unicore32-softmmu: Add unicore32-softmmu build supportGuan Xuetao
This patch adds unicore32-softmmu build support, include configure, makefile, arch_init, and all missing functions needed by softmmu. Although all missing functions are empty, unicore32-softmmu could be build successfully. By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000 Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-08Restart optimization on stage3 update versionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add XBZRLE statisticsOrit Wasserman
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migration accounting for normal and duplicate pagesOrit Wasserman
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migrate_set_cache_size commandOrit Wasserman
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be rounded down to the nearest power of 2). If XBZRLE cache size is too small there will be many cache miss. New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP command to query cache value. Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add XBZRLE to ram_save_block and ram_save_liveOrit Wasserman
In the outgoing migration check to see if the page is cached and changed, then send compressed page by using save_xbrle_page function. In the incoming migration check to see if RAM_SAVE_FLAG_XBZRLE is set and decompress the page (by using load_xbrle function). Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-02Support 'help' as a synonym for '?' in command line optionsPeter Maydell
For command line options which permit '?' meaning 'please list the permitted values', add support for 'help' as a synonym, by abstracting the check out into a helper function. This change means that in some cases where we were being lazy in our string parsing, "?junk" will now be rejected as an invalid option rather than being (undocumentedly) treated the same way as "?". Update the documentation to use 'help' rather than '?', since '?' is a shell metacharacter and thus prone to fail confusingly if there is a single character filename in the current working directory and the '?' has not been escaped. It's therefore better to steer users towards 'help', though '?' is retained for backwards compatibility. We do not, however, update the output of the system emulator's -help (or any documentation autogenerated from the qemu-options.hx which is the source of the -help text) because libvirt parses our -help output and will break. At a later date when QEMU provides a better interface so libvirt can avoid having to do this, we can update the -help text too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-30Merge commit 'quintela/migration-next-v5' into stagingAnthony Liguori
* commit '6c779f22a93cc6e4565b940ef616e3efc5b50ba5': Change ram_save_block to return -1 if there are no more changes ram: save_live_setup() we don't need to synchronize the dirty bitmap. ram: iterate phase ram: save_live_complete() only do one loop ram: save_live_setup() don't need to sent pages savevm: split save_live into stage2 and stage3 savevm: split save_live_setup from save_live_state savevm: introduce is_active method savevm: Refactor cancel operation in its own operation savevm: remove SaveLiveStateHandler savevm: remove SaveSetParamsHandler savevm: Live migration handlers register the struct directly savevm: Use a struct to pass all handlers
2012-07-27target-or32: Add target stubs and QOM cpuJia Liu
Add OpenRISC target stubs, QOM cpu and basic machine. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-23Change ram_save_block to return -1 if there are no more changesOrit Wasserman
It will return 0 if the page is unmodifed. Signed-off-by: Orit Wasserman <owasserm@redhat.com>
2012-07-20ram: save_live_setup() we don't need to synchronize the dirty bitmap.Juan Quintela
1st: we were synchonizing the dirty bitmap before calling memory_global_dirty_log_start(). 2nd: We are marking all pages as dirty anywhere, no reason to go through all the bitmap to "mark" dirty same pages twice. So, call removed. Signed-off-by: Juan Quintela <quintela@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 18:35:57 +0000