| Age | Commit message (Collapse) | Author |
|---|
|
The target-x86_64.conf sysconfig file has been empty and essentially ignored
now for several years. This change removes the unused file to enable moving
towards a stateless configuration.
Signed-off-by: Ikey Doherty <michael.i.doherty@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
If live migration is very fast and can be completed in 1 second,
the dirty_sync_count of MigrationState will not be updated.
Then you will see "dirty sync count: 0" in qemu monitor even if
the actual dirty sync count is not 0.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
This bug manifested itself as a VM that could not be resumed by libvirt
following a migration:
# virsh resume example
error: Failed to resume domain example
error: internal error: cannot parse json {"return":
{"xbzrle-cache":
{..., "cache-miss-rate": -nan, ...},
...
}
}: lexical error: malformed number, a digit is required after the minus sign.
This patch also ensures xbzrle_cache_miss_prev and iterations_prev are
cleared at the start of the migration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Implement the core logic of multiple thread decompression,
the decompression can work now.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Now, multiple thread compression can co-work with xbzrle. when
xbzrle is on, multiple thread compression will only work at the
first round of RAM data sync.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Implement the core logic of the multiple thread compression. At this
point, multiple thread compression can't co-work with xbzrle yet.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Split the function save_zero_page from ram_save_page so that we can
reuse it later.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Define the data structure and variables used to do multiple thread
decompression, and add the code to initialize and free them.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Define the data structure and variables used to do multiple thread
compression, and add the code to initialize and free them.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add the code to create and destroy the multiple threads those will be
used to do data decompression. Left some functions empty just to keep
clearness, and the code will be added later.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add the code to create and destroy the multiple threads those will
be used to do data compression. Left some functions empty to keep
clearness, and the code will be added later.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Compression code (still not on tree) want to call this funtion from
outside the migration thread, so we can't write to last_sent_block.
Instead of reverting full patch:
[PULL 07/11] save_block_hdr: we can recalculate
Just revert the parts that touch last_sent_block.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
There is already a helper function ram_bytes_total(), we can use it to
help counting the total number of pages used by ram blocks.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
It has always been a page header, not a block header. Once there, the
flag argument was only passed to make a bit or with it, just do the or
on the caller.
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
No need to pass it through all the callers. Once there, update
last_sent_block here.
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add a parameter to pass the number of bytes written, and make it return
the number of pages written instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add a parameter to pass the number of bytes written, and make it return
the number of pages written instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add a parameter to pass the number of bytes written, and make it return
the number of pages written instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
It used to be an int, but then we can't pass directly the
bytes_transferred parameter, that would happen later in the series.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
|
|
into staging
Clean up around error_get_pretty(), qerror_report_err()
# gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-02-18:
qemu-char: Avoid qerror_report_err() outside QMP command handlers
qemu-img: Avoid qerror_report_err() outside QMP command handlers
vl: Avoid qerror_report_err() outside QMP command handlers
tpm: Avoid qerror_report_err() outside QMP command handlers
numa: Avoid qerror_report_err() outside QMP command handlers
net: Avoid qerror_report_err() outside QMP command handlers
monitor: Avoid qerror_report_err() outside QMP command handlers
monitor: Clean up around monitor_handle_fd_param()
error: Use error_report_err() where appropriate
error: New convenience function error_report_err()
vhost-scsi: Improve error reporting for invalid vhostfd
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Coccinelle semantic patch:
@@
expression E;
@@
- error_report("%s", error_get_pretty(E));
- error_free(E);
+ error_report_err(E);
@@
expression E, S;
@@
- error_report("%s", error_get_pretty(E));
+ error_report_err(E);
(
exit(S);
|
abort();
)
Trivial manual touch-ups in block/sheepdog.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Allow "unlocked" reads of the ram_list by using an RCU-enabled QLIST.
The ramlist mutex is kept. call_rcu callbacks are run with the iothread
lock taken, but that may change in the future. Writers still take the
ramlist mutex, but they no longer need to assume that the iothread lock
is taken.
Readers of the list, instead, no longer require either the iothread
or ramlist mutex, but they need to use rcu_read_lock() and
rcu_read_unlock().
One place in arch_init.c was downgrading from write side to read side
like this:
qemu_mutex_lock_iothread()
qemu_mutex_lock_ramlist()
...
qemu_mutex_unlock_iothread()
...
qemu_mutex_unlock_ramlist()
and the equivalent idiom is:
qemu_mutex_lock_ramlist()
rcu_read_lock()
...
qemu_mutex_unlock_ramlist()
...
rcu_read_unlock()
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
QLIST has RCU-friendly primitives, so switch to it.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Avoid hot pages being replaced by others to remarkably decrease cache
misses
Sample results with the test program which quote from xbzrle.txt ran in
vm:(migrate bandwidth:1GE and xbzrle cache size 8MB)
the test program:
include <stdlib.h>
include <stdio.h>
int main()
{
char *buf = (char *) calloc(4096, 4096);
while (1) {
int i;
for (i = 0; i < 4096 * 4; i++) {
buf[i * 4096 / 4]++;
}
printf(".");
}
}
before this patch:
virsh qemu-monitor-command test_vm '{"execute": "query-migrate"}'
{"return":{"expected-downtime":1020,"xbzrle-cache":{"bytes":1108284,
"cache-size":8388608,"cache-miss-rate":0.987013,"pages":18297,"overflow":8,
"cache-miss":1228737},"status":"active","setup-time":10,"total-time":52398,
"ram":{"total":12466991104,"remaining":1695744,"mbps":935.559472,
"transferred":5780760580,"dirty-sync-counter":271,"duplicate":2878530,
"dirty-pages-rate":29130,"skipped":0,"normal-bytes":5748592640,
"normal":1403465}},"id":"libvirt-706"}
18k pages sent compressed in 52 seconds.
cache-miss-rate is 98.7%, totally miss.
after optimizing:
virsh qemu-monitor-command test_vm '{"execute": "query-migrate"}'
{"return":{"expected-downtime":2054,"xbzrle-cache":{"bytes":5066763,
"cache-size":8388608,"cache-miss-rate":0.485924,"pages":194823,"overflow":0,
"cache-miss":210653},"status":"active","setup-time":11,"total-time":18729,
"ram":{"total":12466991104,"remaining":3895296,"mbps":937.663549,
"transferred":1615042219,"dirty-sync-counter":98,"duplicate":2869840,
"dirty-pages-rate":58781,"skipped":0,"normal-bytes":1588404224,
"normal":387794}},"id":"libvirt-266"}
194k pages sent compressed in 18 seconds.
The value of cache-miss-rate decrease to 48.59%.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
If block used_length does not match, try to resize it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch allows us to distinguish between two
length values for each block:
max_length - length of memory block that was allocated
used_length - length of block used by QEMU/guest
Currently, we set used_length - max_length, unconditionally.
Follow-up patches allow used_length <= max_length.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The static variables in migration_bitmap_sync will not be reset in
the case of a second attempted migration.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
During migration, the values read from migration stream during ram load
are not validated. Especially offset in host_from_stream_offset() and
also the length of the writes in the callers of said function.
To fix this, we need to make sure that the [offset, offset + length]
range fits into one of the allocated memory regions.
Validating addr < len should be sufficient since data seems to always be
managed in TARGET_PAGE_SIZE chunks.
Fixes: CVE-2014-7840
Note: follow-up patches add extra checks on each block->host access.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
this patch extends commit db80fac by not only checking
for unknown flags, but also filtering out unknown flag
combinations.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
As the function always return 1, it is not needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add TriCore target stubs, and QOM cpu, and Maintainer
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-id: 1409572800-4116-2-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When live migrate fails due to a section length mismatch we currently
see an error message like:
Length mismatch: 0000:00:03.0/virtio-net-pci.rom: 10000 in != 20000
The section lengths are in fact in hex, so this should read
Length mismatch: 0000:00:03.0/virtio-net-pci.rom: 0x10000 in != 0x20000
Correct the error string to reflect this.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
if a saved vm has unknown flags in the memory data qemu
currently simply ignores this flag and continues which
yields in an unpredictable result.
This patch catches all unknown flags and aborts the
loading of the vm. Additionally error reports are thrown
if the migration aborts abnormally.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
We call g_free() after cache_fini() in migration_end(), but we don't
call it after cache_fini() in xbzrle_cache_resize(), leaking the
memory.
cache_init() and cache_fini() are a pair. Since cache_init()
allocates the cache, let cache_fini() free it. This plugs the leak.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Replace fprintf(stderr,...) with error_report() in the file
arch_init.c. The trailing "\n"s of the @fmt argument have been removed
because @fmt of error_report() should not contain newline.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
ram_save_block is getting a bit too complicated, and does two separate
things:
1) Finds a page to send
2) Sends the page (dealing with compression etc)
Split into 'ram_save_page' to send the page and deal with compression (2)
Rename remaining function to 'ram_find_and_save_block'
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
For xbzrle_decode_buffer(), when decoding contents will exceed writing
buffer, it will return -1, so need not check the return value whether
large than writing buffer.
And when failure occurs within load_xbzrle(), it always return -1
without any resources which need release.
So can remove the related checking statements, and also can remove 'rc'
and 'ret' local variables,
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
When DPRINTF() has effect, the original author wants to print all
ram_load() calling results. So need use 'goto' instead of 'return'
within ram_load(), just like other areas have done.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
expose xbzrle cache miss rate
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
expose the count that logs the times of updating the dirty bitmap to
end user.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add counts to log the times of updating the dirty bitmap.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
The page may not be inserted into cache after executing save_xbzrle_page.
In case of failure to insert, the original page should be sent rather
than the page in the cache.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
version_id is checked twice in the ram_load.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Initialising the XBZRLE.lock earlier simplifies the lock use.
Based on Markus's patch in:
http://lists.gnu.org/archive/html/qemu-devel/2014-03/msg03879.html
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Provide ram_mig_init (like blk_mig_init) for vl.c to initialise stuff
to do with ram migration (currently in arch_init.c).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
This is a fix for a bug* triggered by a migration after hot unplugging
a few virtio-net NICs, that caused migration never to converge, because
'migration_dirty_pages' is incorrectly initialised.
'migration_dirty_pages' is used as a tally of the number of outstanding
dirty pages, to give the migration code an idea of how much more data
will need to be transferred, and thus whether it can end the iterative
phase.
It was initialised to the total size of the RAMBlock address space,
however hotunplug can leave this space sparse, and hence
migration_dirty_pages ended up too large.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(* https://bugzilla.redhat.com/show_bug.cgi?id=1074913 )
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Resizing the xbzrle cache during migration causes qemu-crash,
because the main-thread and migration-thread modify the xbzrle
cache size concurrently without lock-protection.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Push zero'd pages into the XBZRLE cache
A page that was cached by XBZRLE, zero'd and then XBZRLE'd again
was being compared against a stale cache value
Don't use 'qemu_put_buffer_async' to put pages from the XBZRLE cache
Since the cache might change before the data hits the wire
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
It is better to fail migration in case of failure to
allocate new cache item
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
