aboutsummaryrefslogtreecommitdiff
path: root/accel
AgeCommit message (Collapse)Author
2018-12-11accel: register global_props like machine globalsMarc-André Lureau
global_props is only used for Xen xen_compat_props. It's a static array of GlobalProperty, like machine globals in SET_MACHINE_COMPAT(). Let's register the globals the same way, without extra copy allocation. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20181204142023.15982-5-marcandre.lureau@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-31cputlb: Remove tlb_c.pending_flushesRichard Henderson
This is essentially redundant with tlb_c.dirty. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Filter flushes on already clean tlbsRichard Henderson
Especially for guests with large numbers of tlbs, like ARM or PPC, we may well not use all of them in between flush operations. Remember which tlbs have been used since the last flush, and avoid any useless flushing. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Count "partial" and "elided" tlb flushesRichard Henderson
Our only statistic so far was "full" tlb flushes, where all mmu_idx are flushed at the same time. Now count "partial" tlb flushes where sets of mmu_idx are flushed, but the set is not maximal. Account one per mmu_idx flushed, as that is the unit of work performed. We don't actually count elided flushes yet, but go ahead and change the interface presented to the monitor all at once. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Merge tlb_flush_page into tlb_flush_page_by_mmuidxRichard Henderson
The difference between the two sets of APIs is now miniscule. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Merge tlb_flush_nocheck into tlb_flush_by_mmuidx_async_workRichard Henderson
The difference between the two sets of APIs is now miniscule. This allows tlb_flush, tlb_flush_all_cpus, and tlb_flush_all_cpus_synced to be merged with their corresponding by_mmuidx functions as well. For accounting, consider mmu_idx_bitmask = ALL_MMUIDX_BITS to be a full flush. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Move env->vtlb_index to env->tlb_d.vindexRichard Henderson
The rest of the tlb victim cache is per-tlb, the next use index should be as well. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Split large page tracking per mmu_idxRichard Henderson
The set of large pages in the kernel is probably not the same as the set of large pages in the application. Forcing one range to cover both will flush more often than necessary. This allows tlb_flush_page_async_work to flush just the one mmu_idx implicated, which in turn allows us to remove tlb_check_page_and_flush_by_mmuidx_async_work. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Move cpu->pending_tlb_flush to env->tlb_c.pending_flushRichard Henderson
Protect it with the tlb_lock instead of using atomics. The move puts it in or near the same cacheline as the lock; using the lock means we don't need a second atomic operation in order to perform the update. Which makes it cheap to also update pending_flush in tlb_flush_by_mmuidx_async_work. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Remove tcg_enabled hack from tlb_flush_nocheckRichard Henderson
The bugs this was working around were fixed with commits 022d6378c7fd target/unicore32: remove tlb_flush from uc32_init_fn 6e11beecfde0 target/alpha: remove tlb_flush from alpha_cpu_initfn Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Move tlb_lock to CPUTLBCommonRichard Henderson
This is the first of several moves to reduce the size of the CPU_COMMON_TLB macro and improve some locality of refernce. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* RTC fixes (Artem) * icount fixes (Artem) * rr fixes (Pavel, myself) * hotplug cleanup (Igor) * SCSI fixes (myself) * 4.20-rc1 KVM header update (myself) * coalesced PIO support (Peng Hao) * HVF fixes (Roman B.) * Hyper-V refactoring (Roman K.) * Support for Hyper-V IPI (Vitaly) # gpg: Signature made Fri 19 Oct 2018 12:47:58 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) replay: pass raw icount value to replay_save_clock target/i386: kvm: just return after migrate_add_blocker failed hyperv_testdev: add SynIC message and event testmodes hyperv: process POST_MESSAGE hypercall hyperv: add support for KVM_HYPERV_EVENTFD hyperv: process SIGNAL_EVENT hypercall hyperv: add synic event flag signaling hyperv: add synic message delivery hyperv: make overlay pages for SynIC hyperv: only add SynIC in compatible configurations hyperv: qom-ify SynIC hyperv:synic: split capability testing and setting i386: add hyperv-stub for CONFIG_HYPERV=n default-configs: collect CONFIG_HYPERV* in hyperv.mak hyperv: factor out arch-independent API into hw/hyperv hyperv: make hyperv_vp_index inline hyperv: split hyperv-proto.h into x86 and arch-independent parts hyperv: rename kvm_hv_sint_route_set_sint hyperv: make HvSintRoute reference-counted hyperv: address HvSintRoute by X86CPU pointer ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19target-i386 : add coalesced_pio APIPeng Hao
the primary API realization. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1539795177-21038-3-git-send-email-peng.hao2@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-18cputlb: read CPUTLBEntry.addr_write atomicallyEmilio G. Cota
Updates can come from other threads, so readers that do not take tlb_lock must use atomic_read to avoid undefined behaviour (UB). This completes the conversion to tlb_lock. This conversion results on average in no performance loss, as the following experiments (run on an Intel i7-6700K CPU @ 4.00GHz) show. 1. aarch64 bootup+shutdown test: - Before: Performance counter stats for 'taskset -c 0 ../img/aarch64/die.sh' (10 runs): 7487.087786 task-clock (msec) # 0.998 CPUs utilized ( +- 0.12% ) 31,574,905,303 cycles # 4.217 GHz ( +- 0.12% ) 57,097,908,812 instructions # 1.81 insns per cycle ( +- 0.08% ) 10,255,415,367 branches # 1369.747 M/sec ( +- 0.08% ) 173,278,962 branch-misses # 1.69% of all branches ( +- 0.18% ) 7.504481349 seconds time elapsed ( +- 0.14% ) - After: Performance counter stats for 'taskset -c 0 ../img/aarch64/die.sh' (10 runs): 7462.441328 task-clock (msec) # 0.998 CPUs utilized ( +- 0.07% ) 31,478,476,520 cycles # 4.218 GHz ( +- 0.07% ) 57,017,330,084 instructions # 1.81 insns per cycle ( +- 0.05% ) 10,251,929,667 branches # 1373.804 M/sec ( +- 0.05% ) 173,023,787 branch-misses # 1.69% of all branches ( +- 0.11% ) 7.474970463 seconds time elapsed ( +- 0.07% ) 2. SPEC06int: SPEC06int (test set) [Y axis: Speedup over master] 1.15 +-+----+------+------+------+------+------+-------+------+------+------+------+------+------+----+-+ | | 1.1 +-+.................................+++.............................+ tlb-lock-v2 (m+++x) +-+ | +++ | +++ tlb-lock-v3 (spinl|ck) | | +++ | | +++ +++ | | | 1.05 +-+....+++...........####.........|####.+++.|......|.....###....+++...........+++....###.........+-+ | ### ++#| # |# |# ***### +++### +++#+# | +++ | #|# ### | 1 +-+++***+#++++####+++#++#++++++++++#++#+*+*++#++++#+#+****+#++++###++++###++++###++++#+#++++#+#+++-+ | *+* # #++# *** # #### *** # * *++# ****+# *| * # ****|# |# # #|# #+# # # | 0.95 +-+..*.*.#....#..#.*|*..#...#..#.*|*..#.*.*..#.*|.*.#.*++*.#.*++*+#.****.#....#+#....#.#..++#.#..+-+ | * * # # # *|* # # # *|* # * * # *++* # * * # * * # * |* # ++# # # # *** # | | * * # ++# # *+* # # # *|* # * * # * * # * * # * * # *++* # **** # ++# # * * # | 0.9 +-+..*.*.#...|#..#.*.*..#.++#..#.*|*..#.*.*..#.*..*.#.*..*.#.*..*.#.*..*.#.*.|*.#...|#.#..*.*.#..+-+ | * * # *** # * * # |# # *+* # * * # * * # * * # * * # * * # *++* # |# # * * # | 0.85 +-+..*.*.#..*|*..#.*.*..#.***..#.*.*..#.*.*..#.*..*.#.*..*.#.*..*.#.*..*.#.*..*.#.****.#..*.*.#..+-+ | * * # *+* # * * # *|* # * * # * * # * * # * * # * * # * * # * * # * |* # * * # | | * * # * * # * * # *+* # * * # * * # * * # * * # * * # * * # * * # * |* # * * # | 0.8 +-+..*.*.#..*.*..#.*.*..#.*.*..#.*.*..#.*.*..#.*..*.#.*..*.#.*..*.#.*..*.#.*..*.#.*++*.#..*.*.#..+-+ | * * # * * # * * # * * # * * # * * # * * # * * # * * # * * # * * # * * # * * # | 0.75 +-+--***##--***###-***###-***###-***###-***###-****##-****##-****##-****##-****##-****##--***##--+-+ 400.perlben401.bzip2403.gcc429.m445.gob456.hmme45462.libqua464.h26471.omnet473483.xalancbmkgeomean png: https://imgur.com/a/BHzpPTW Notes: - tlb-lock-v2 corresponds to an implementation with a mutex. - tlb-lock-v3 corresponds to the current implementation, i.e. a spinlock and a single lock acquisition in tlb_set_page_with_attrs. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181016153840.25877-1-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: Split CONFIG_ATOMIC128Richard Henderson
GCC7+ will no longer advertise support for 16-byte __atomic operations if only cmpxchg is supported, as for x86_64. Fortunately, x86_64 still has support for __sync_compare_and_swap_16 and we can make use of that. AArch64 does not have, nor ever has had such support, so open-code it. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: Add tlb_index and tlb_entry helpersRichard Henderson
Isolate the computation of an index from an address into a helper before we change that function. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [ cota: convert tlb_vaddr_to_host; use atomic_read on addr_write ] Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181009175129.17888-2-cota@braap.org>
2018-10-18cputlb: serialize tlb updates with env->tlb_lockEmilio G. Cota
Currently we rely on atomic operations for cross-CPU invalidations. There are two cases that these atomics miss: cross-CPU invalidations can race with either (1) vCPU threads flushing their TLB, which happens via memset, or (2) vCPUs calling tlb_reset_dirty on their TLB, which updates .addr_write with a regular store. This results in undefined behaviour, since we're mixing regular and atomic ops on concurrent accesses. Fix it by using tlb_lock, a per-vCPU lock. All updaters of tlb_table and the corresponding victim cache now hold the lock. The readers that do not hold tlb_lock must use atomic reads when reading .addr_write, since this field can be updated by other threads; the conversion to atomic reads is done in the next patch. Note that an alternative fix would be to expand the use of atomic ops. However, in the case of TLB flushes this would have a huge performance impact, since (1) TLB flushes can happen very frequently and (2) we currently use a full memory barrier to flush each TLB entry, and a TLB has many entries. Instead, acquiring the lock is barely slower than a full memory barrier since it is uncontended, and with a single lock acquisition we can flush the entire TLB. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181009174557.16125-6-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18cputlb: fix assert_cpu_is_self macroEmilio G. Cota
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181009174557.16125-5-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18exec: introduce tlb_initEmilio G. Cota
Paves the way for the addition of a per-TLB lock. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181009174557.16125-4-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: access cpu->icount_decr.u16.high with atomicsEmilio G. Cota
Consistently access u16.high with atomics to avoid undefined behaviour in MTTCG. Note that icount_decr.u16.low is only used in icount mode, so regular accesses to it are OK. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181010144853.13005-2-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: Implement CPU_LOG_TB_NOCHAIN during expansionRichard Henderson
Rather than test NOCHAIN before linking, do not emit the goto_tb opcode at all. We already do this for goto_ptr. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-02accel/tcg: Remove dead codeThomas Huth
The global cpu_single_env variable has been removed more than 5 years ago, so apparently nobody used this dead debug code in that timeframe anymore. Thus let's remove it completely now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1537204134-15905-1-git-send-email-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02translator: fix breakpoint processingPavel Dovgalyuk
QEMU cannot pass through the breakpoints when 'si' command is used in remote gdb. This patch disables inserting the breakpoints when we are already single stepping though the gdb remote protocol. This patch also fixes icount calculation for the blocks that include breakpoints - instruction with breakpoint is not executed and shouldn't be used in icount calculation. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180912081910.3228.8523.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-26qht: drop ht argument from qht iteratorsEmilio G. Cota
Accessing the HT from an iterator results almost always in a deadlock. Given that only one qht-internal function uses this argument, drop it from the interface. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-23KVM: cleanup unnecessary #ifdef KVM_CAP_...Paolo Bonzini
The capability macros are always defined, since they come from kernel headers that are copied into the QEMU tree. Remove the unnecessary #ifdefs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-17kvm: Use inhibit to prevent ballooning without synchronous mmuAlex Williamson
Remove KVM specific tests in balloon_page(), instead marking ballooning as inhibited without KVM_CAP_SYNC_MMU support. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-08-14accel/tcg: Check whether TLB entry is RAM consistently with how we set it upPeter Maydell
We set up TLB entries in tlb_set_page_with_attrs(), where we have some logic for determining whether the TLB entry is considered to be RAM-backed, and thus has a valid addend field. When we look at the TLB entry in get_page_addr_code(), we use different logic for determining whether to treat the page as RAM-backed and use the addend field. This is confusing, and in fact buggy, because the code in tlb_set_page_with_attrs() correctly decides that rom_device memory regions not in romd mode are not RAM-backed, but the code in get_page_addr_code() thinks they are RAM-backed. This typically results in "Bad ram pointer" assertion if the guest tries to execute from such a memory region. Fix this by making get_page_addr_code() just look at the TLB_MMIO bit in the code_address field of the TLB, which tlb_set_page_with_attrs() sets if and only if the addend field is not valid for code execution. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180713150945.12348-1-peter.maydell@linaro.org
2018-08-14accel/tcg: Return -1 for execution from MMIO regions in get_page_addr_code()Peter Maydell
Now that all the callers can handle get_page_addr_code() returning -1, remove all the code which tries to handle execution from MMIO regions or small-MMU-region RAM areas. This will mean that we can correctly execute from these areas, rather than ending up either aborting QEMU or delivering an incorrect guest exception. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180710160013.26559-6-peter.maydell@linaro.org
2018-08-14accel/tcg: tb_gen_code(): Create single-insn TB for execution from non-RAMPeter Maydell
If get_page_addr_code() returns -1, this indicates that there is no RAM page we can read a full TB from. Instead we must create a TB which contains a single instruction and which we do not cache, so it is executed only once. Since this means we can now have TBs which are not in any page list, we also need to make tb_phys_invalidate() handle them (by not trying to remove them from a nonexistent page list). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180710160013.26559-5-peter.maydell@linaro.org
2018-08-14accel/tcg: Handle get_page_addr_code() returning -1 in tb_check_watchpoint()Peter Maydell
When we support execution from non-RAM MMIO regions, get_page_addr_code() will return -1 to indicate that there is no RAM at the requested address. Handle this in tb_check_watchpoint() -- if the exception happened for a PC which doesn't correspond to RAM then there is no need to invalidate any TBs, because the one-instruction TB will not have been cached. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180710160013.26559-4-peter.maydell@linaro.org
2018-08-14accel/tcg: Handle get_page_addr_code() returning -1 in hashtable lookupsPeter Maydell
When we support execution from non-RAM MMIO regions, get_page_addr_code() will return -1 to indicate that there is no RAM at the requested address. Handle this in the cpu-exec TB hashtable lookup code, treating it as "no match found". Note that the call to get_page_addr_code() in tb_lookup_cmp() needs no changes -- a return of -1 will already correctly result in the function returning false. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180710160013.26559-3-peter.maydell@linaro.org
2018-08-14accel/tcg: Pass read access type through to io_readx()Peter Maydell
The io_readx() function needs to know whether the load it is doing is an MMU_DATA_LOAD or an MMU_INST_FETCH, so that it can pass the right value to the cpu_transaction_failed() function. Plumb this information through from the softmmu code. This is currently not often going to give the wrong answer, because usually instruction fetches go via get_page_addr_code(). However once we switch over to handling execution from non-RAM by creating single-insn TBs, the path for an insn fetch to generate a bus error will be through cpu_ld*_code() and io_readx(), so without this change we will generate a d-side fault when we should generate an i-side fault. We also have to pass the access type via a CPU struct global down to unassigned_mem_read(), for the benefit of the targets which still use the cpu_unassigned_access() hook (m68k, mips, sparc, xtensa). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180710160013.26559-2-peter.maydell@linaro.org
2018-07-17Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
Bug fixes. # gpg: Signature made Tue 17 Jul 2018 16:06:07 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: Document command line options with single dash opts: remove redundant check for NULL parameter i386: only parse the initrd_filename once for multiboot modules i386: fix regression parsing multiboot initrd modules virtio-scsi: fix hotplug ->reset() vs event race qdev: add HotplugHandler->post_plug() callback hw/char/serial: retry write if EAGAIN PC Chipset: Improve serial divisor calculation vhost-user-test: added proper TestServer *dest initialization in test_migrate() hyperv: ensure VP index equal to QEMU cpu_index hyperv: rename vcpu_id to vp_index accel: Fix typo and grammar in comment dump: add kernel_gs_base to QEMU CPU state Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-16accel/tcg: Assert that tlb fill gave us a valid TLB entryPeter Maydell
In commit 4b1a3e1e34ad97 we added a check for whether the TLB entry we had following a tlb_fill had the INVALID bit set. This could happen in some circumstances because a stale or wrong TLB entry was pulled out of the victim cache. However, after commit 68fea038553039e (which prevents stale entries being in the victim cache) and the previous commit (which ensures we don't incorrectly hit in the victim cache)) this should never be possible. Drop the check on TLB_INVALID_MASK from the "is this a TLB_RECHECK?" condition, and instead assert that the tlb fill procedure has given us a valid TLB entry (or longjumped out with a guest exception). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180713141636.18665-3-peter.maydell@linaro.org
2018-07-16accel/tcg: Use correct test when looking in victim TLB for codePeter Maydell
In get_page_addr_code(), we were incorrectly looking in the victim TLB for an entry which matched the target address for reads, not for code accesses. This meant that we could hit on a victim TLB entry that indicated that the address was readable but not executable, and incorrectly bypass the call to tlb_fill() which should generate the guest MMU exception. Fix this bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180713141636.18665-2-peter.maydell@linaro.org
2018-07-16accel: Fix typo and grammar in commentStefan Weil
The typo was found by codespell. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20180712194454.26765-1-sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-09translate-all: honour CF_NOCACHE in tb_gen_codeEmilio G. Cota
This fixes a record-replay regression introduced by 95590e2 ("translate-all: discard TB when tb_link_page returns an existing matching TB", 2018-06-15). The problem is that code using CF_NOCACHE assumes that the TB returned from tb_gen_code is always a newly-generated one. This assumption, however, was broken in the aforementioned commit. Fix it by honouring CF_NOCACHE, so that tb_gen_code always returns a newly-generated TB when CF_NOCACHE is passed to it. Do this by avoiding the TB hash table if CF_NOCACHE is set. Reported-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Tested-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1530806837-5416-1-git-send-email-cota@braap.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* IEC units series (Philippe) * Hyper-V PV TLB flush (Vitaly) * git archive detection (Daniel) * host serial passthrough fix (David) * NPT support for SVM emulation (Jan) * x86 "info mem" and "info tlb" fix (Doug) # gpg: Signature made Mon 02 Jul 2018 16:18:21 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (50 commits) tcg: simplify !CONFIG_TCG handling of tb_invalidate_* i386/monitor.c: make addresses canonical for "info mem" and "info tlb" target-i386: Add NPT support serial: Open non-block bsd-user: Use the IEC binary prefix definitions linux-user: Use the IEC binary prefix definitions tests/crypto: Use the IEC binary prefix definitions vl: Use the IEC binary prefix definitions monitor: Use the IEC binary prefix definitions cutils: Do not include "qemu/units.h" directly hw/rdma: Use the IEC binary prefix definitions hw/virtio: Use the IEC binary prefix definitions hw/vfio: Use the IEC binary prefix definitions hw/sd: Use the IEC binary prefix definitions hw/usb: Use the IEC binary prefix definitions hw/net: Use the IEC binary prefix definitions hw/i386: Use the IEC binary prefix definitions hw/ppc: Use the IEC binary prefix definitions hw/mips: Use the IEC binary prefix definitions hw/mips/r4k: Constify params_size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02accel/tcg: Avoid caching overwritten tlb entriesRichard Henderson
When installing a TLB entry, remove any cached version of the same page in the VTLB. If the existing TLB entry matches, do not copy into the VTLB, but overwrite it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02accel/tcg: Don't treat invalid TLB entries as needing recheckPeter Maydell
In get_page_addr_code() when we check whether the TLB entry is marked as TLB_RECHECK, we should not go down that code path if the TLB entry is not valid at all (ie the TLB_INVALID bit is set). Tested-by: Laurent Vivier <laurent@vivier.eu> Reported-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180629161731.16239-1-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02accel/tcg: Correct "is this a TLB miss" check in get_page_addr_code()Peter Maydell
In commit 71b9a45330fe220d1 we changed the condition we use to determine whether we need to refill the TLB in get_page_addr_code() to if (unlikely(env->tlb_table[mmu_idx][index].addr_code != (addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK)))) { This isn't the right check (it will falsely fail if the input addr happens to have the low bit corresponding to TLB_INVALID_MASK set, for instance). Replace it with a use of the new tlb_hit() function, which is the correct test. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180629162122.19376-3-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02tcg: Define and use new tlb_hit() and tlb_hit_page() functionsPeter Maydell
The condition to check whether an address has hit against a particular TLB entry is not completely trivial. We do this in various places, and in fact in one place (get_page_addr_code()) we have got the condition wrong. Abstract it out into new tlb_hit() and tlb_hit_page() inline functions (one for a known-page-aligned address and one for an arbitrary address), and use them in all the places where we had the condition correct. This is a no-behaviour-change patch; we leave fixing the buggy code in get_page_addr_code() to a subsequent patch. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180629162122.19376-2-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02translate-all: fix locking of TBs whose two pages share the same physical pageEmilio G. Cota
Commit 0b5c91f ("translate-all: use per-page locking in !user-mode", 2018-06-15) introduced per-page locking. It assumed that the physical pages corresponding to a TB (at most two pages) are always distinct, which is wrong. For instance, an xtensa test provided by Max Filippov is broken by the commit, since the test maps two virtual pages to the same physical page: virt1: 7fff, virt2: 8000 phys1 6000fff, phys2 6000000 Fix it by removing the assumption from page_lock_pair. If the two physical page addresses are equal, we only lock the PageDesc once. Note that the two callers of page_lock_pair, namely page_unlock_tb and tb_link_page, are also updated so that we do not try to unlock the same PageDesc twice. Fixes: 0b5c91f74f3c83a36f37740969df8c775c997e69 Reported-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1529944302-14186-1-git-send-email-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02tcg: simplify !CONFIG_TCG handling of tb_invalidate_*Paolo Bonzini
There is no need for a stub, since tb_invalidate_phys_addr can be excised altogether when TCG is disabled. This is a bit cleaner since it avoids using code that is clearly specific to user-mode emulation (it calls mmap_lock/unlock) for the !CONFIG_TCG case. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02tcg: Fix --disable-tcg build breakagePhilippe Mathieu-Daudé
Fix the --disable-tcg breakage introduced by 8bca9a03ec60d: $ configure --disable-tcg [...] $ make -C i386-softmmu exec.o make: Entering directory 'i386-softmmu' CC exec.o In file included from source/qemu/exec.c:62:0: source/qemu/include/exec/ram_addr.h:96:6: error: conflicting types for ‘tb_invalidate_phys_range’ void tb_invalidate_phys_range(ram_addr_t start, ram_addr_t end); ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from source/qemu/exec.c:24:0: source/qemu/include/exec/exec-all.h:309:6: note: previous declaration of ‘tb_invalidate_phys_range’ was here void tb_invalidate_phys_range(target_ulong start, target_ulong end); ^~~~~~~~~~~~~~~~~~~~~~~~ source/qemu/exec.c:1043:6: error: conflicting types for ‘tb_invalidate_phys_addr’ void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs) ^~~~~~~~~~~~~~~~~~~~~~~ In file included from source/qemu/exec.c:24:0: source/qemu/include/exec/exec-all.h:308:6: note: previous declaration of ‘tb_invalidate_phys_addr’ was here void tb_invalidate_phys_addr(target_ulong addr); ^~~~~~~~~~~~~~~~~~~~~~~ make: *** [source/qemu/rules.mak:69: exec.o] Error 1 make: Leaving directory 'i386-softmmu' Tested to build x86_64-softmmu and i386-softmmu targets. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180629200710.27626-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* "info mtree" improvements (Alexey) * fake VPD block limits for SCSI passthrough (Daniel Barboza) * chardev and main loop fixes (Daniel Berrangé, Sergio, Stefan) * help fixes (Eduardo) * pc-dimm refactoring (David) * tests improvements and fixes (Emilio, Thomas) * SVM emulation fixes (Jan) * MemoryRegionCache fix (Eric) * WHPX improvements (Justin) * ESP cleanup (Mark) * -overcommit option (Michael) * qemu-pr-helper fixes (me) * "info pic" improvements for x86 (Peter) * x86 TCG emulation fixes (Richard) * KVM slot handling fix (Shannon) * Next round of deprecation (Thomas) * Windows dump format support (Viktor) # gpg: Signature made Fri 29 Jun 2018 12:03:05 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (60 commits) tests/boot-serial: Do not delete the output file in case of errors hw/scsi: add VPD Block Limits emulation hw/scsi: centralize SG_IO calls into single function hw/scsi: cleanups before VPD BL emulation dump: add Windows live system dump dump: add fallback KDBG using in Windows dump dump: use system context in Windows dump dump: add Windows dump format to dump-guest-memory i386/cpu: make -cpu host support monitor/mwait kvm: support -overcommit cpu-pm=on|off hmp: obsolete "info ioapic" ioapic: support "info irq" ioapic: some proper indents when dump info ioapic: support "info pic" doc: another fix to "info pic" target-i386: Mark cpu_vmexit noreturn target-i386: Allow interrupt injection after STGI target-i386: Add NMI interception to SVM memory/hmp: Print owners/parents in "info mtree" WHPX: register for unrecognized MSR exits ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29i386/cpu: make -cpu host support monitor/mwaitMichael S. Tsirkin
When guest CPU PM is enabled, and with -cpu host, expose the host CPU MWAIT leaf in the CPUID so guest can make good PM decisions. Note: the result is 100% CPU utilization reported by host as host no longer knows that the CPU is halted. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20180622192148.178309-3-mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28kvm: Delete the slot if and only if the KVM_MEM_READONLY flag is changedShannon Zhao
According to KVM commit 75d61fbc, it needs to delete the slot before changing the KVM_MEM_READONLY flag. But QEMU commit 235e8982 only check whether KVM_MEM_READONLY flag is set instead of changing. It doesn't need to delete the slot if the KVM_MEM_READONLY flag is not changed. This fixes a issue that migrating a VM at the OVMF startup stage and VM is executing the codes in rom. Between the deleting and adding the slot in kvm_set_user_memory_region, there is a chance that guest access rom and trap to KVM, then KVM can't find the corresponding memslot. While KVM (on ARM) injects an abort to guest due to the broken hva, then guest will get stuck. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Message-Id: <1526462314-19720-1-git-send-email-zhaoshenglong@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28move public invalidate APIs out of translate-all.{c,h}, clean upPaolo Bonzini
Place them in exec.c, exec-all.h and ram_addr.h. This removes knowledge of translate-all.h (which is an internal header) from several files outside accel/tcg and removes knowledge of AddressSpace from translate-all.c (as it only operates on ram_addr_t). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request * Gracefully handle Linux AIO init failure # gpg: Signature made Wed 27 Jun 2018 15:48:28 BST # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: linux-aio: properly bubble up errors from initialization compiler: add a sizeof_field() macro Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-25 23:25:51 +0000