| Age | Commit message (Collapse) | Author |
|---|
|
This is only compiled under CONFIG_DEBUG_TCG to avoid
bloating the binary.
In user-mode, assert_page_locked is equivalent to assert_mmap_lock.
Note: There are some tb_lock assertions left that will be
removed by later patches.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Groundwork for supporting parallel TCG generation.
Instead of using a global lock (tb_lock) to protect changes
to pages, use fine-grained, per-page locks in !user-mode.
User-mode stays with mmap_lock.
Sometimes changes need to happen atomically on more than one
page (e.g. when a TB that spans across two pages is
added/invalidated, or when a range of pages is invalidated).
We therefore introduce struct page_collection, which helps
us keep track of a set of pages that have been locked in
the appropriate locking order (i.e. by ascending page index).
This commit first introduces the structs and the function helpers,
to then convert the calling code to use per-page locking. Note
that tb_lock is not removed yet.
While at it, rename tb_alloc_page to tb_page_add, which pairs with
tb_page_remove.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This greatly simplifies next commit's diff.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
So that we pass a same-page range to tb_invalidate_phys_page_range,
instead of always passing an end address that could be on a different
page.
As discussed with Peter Maydell on the list [1], tb_invalidate_phys_page_range
doesn't actually do much with 'end', which explains why we have never
hit a bug despite going against what the comment on top of
tb_invalidate_phys_page_range requires:
> * Invalidate all TBs which intersect with the target physical address range
> * [start;end[. NOTE: start and end must refer to the *same* physical page.
The appended honours the comment, which avoids confusion.
While at it, rework the loop into a for loop, which is less error prone
(e.g. "continue" won't result in an infinite loop).
[1] https://lists.gnu.org/archive/html/qemu-devel/2017-07/msg09165.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Groundwork for supporting parallel TCG generation.
Move the hole to the end of the struct, so that a u32
field can be added there without bloating the struct.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Groundwork for supporting parallel TCG generation.
We never remove entries from the radix tree, so we can use cmpxchg
to implement lockless insertions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This commit does several things, but to avoid churn I merged them all
into the same commit. To wit:
- Use uintptr_t instead of TranslationBlock * for the list of TBs in a page.
Just like we did in (c37e6d7e "tcg: Use uintptr_t type for
jmp_list_{next|first} fields of TB"), the rationale is the same: these
are tagged pointers, not pointers. So use a more appropriate type.
- Only check the least significant bit of the tagged pointers. Masking
with 3/~3 is unnecessary and confusing.
- Introduce the TB_FOR_EACH_TAGGED macro, and use it to define
PAGE_FOR_EACH_TB, which improves readability. Note that
TB_FOR_EACH_TAGGED will gain another user in a subsequent patch.
- Update tb_page_remove to use PAGE_FOR_EACH_TB. In case there
is a bug and we attempt to remove a TB that is not in the list, instead
of segfaulting (since the list is NULL-terminated) we will reach
g_assert_not_reached().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Thereby making it per-TCGContext. Once we remove tb_lock, this will
avoid an atomic increment every time a TB is invalidated.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This paves the way for enabling scalable parallel generation of TCG code.
Instead of tracking TBs with a single binary search tree (BST), use a
BST for each TCG region, protecting it with a lock. This is as scalable
as it gets, since each TCG thread operates on a separate region.
The core of this change is the introduction of struct tcg_region_tree,
which contains a pointer to a GTree and an associated lock to serialize
accesses to it. We then allocate an array of tcg_region_tree's, adding
the appropriate padding to avoid false sharing based on
qemu_dcache_linesize.
Given a tc_ptr, we first find the corresponding region_tree. This
is done by special-casing the first and last regions first, since they
might be of size != region.size; otherwise we just divide the offset
by region.stride. I was worried about this division (several dozen
cycles of latency), but profiling shows that this is not a fast path.
Note that region.stride is not required to be a power of two; it
is only required to be a multiple of the host's page size.
Note that with this design we can also provide consistent snapshots
about all region trees at once; for instance, tcg_tb_foreach
acquires/releases all region_tree locks before/after iterating over them.
For this reason we now drop tb_lock in dump_exec_info().
As an alternative I considered implementing a concurrent BST, but this
can be tricky to get right, offers no consistent snapshots of the BST,
and performance and scalability-wise I don't think it could ever beat
having separate GTrees, given that our workload is insert-mostly (all
concurrent BST designs I've seen focus, understandably, on making
lookups fast, which comes at the expense of convoluted, non-wait-free
insertions/removals).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The meaning of "existing" is now changed to "matches in hash and
ht->cmp result". This is saner than just checking the pointer value.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
qht_lookup now uses the default cmp function. qht_lookup_custom is defined
to retain the old behaviour, that is a cmp function is explicitly provided.
qht_insert will gain use of the default cmp in the next patch.
Note that we move qht_lookup_custom's @func to be the last argument,
which makes the new qht_lookup as simple as possible.
Instead of this (i.e. keeping @func 2nd):
0000000000010750 <qht_lookup>:
10750: 89 d1 mov %edx,%ecx
10752: 48 89 f2 mov %rsi,%rdx
10755: 48 8b 77 08 mov 0x8(%rdi),%rsi
10759: e9 22 ff ff ff jmpq 10680 <qht_lookup_custom>
1075e: 66 90 xchg %ax,%ax
We get:
0000000000010740 <qht_lookup>:
10740: 48 8b 4f 08 mov 0x8(%rdi),%rcx
10744: e9 37 ff ff ff jmpq 10680 <qht_lookup_custom>
10749: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Currently we don't support board configurations that put an IOMMU
in the path of the CPU's memory transactions, and instead just
assert() if the memory region fonud in address_space_translate_for_iotlb()
is an IOMMUMemoryRegion.
Remove this limitation by having the function handle IOMMUs.
This is mostly straightforward, but we must make sure we have
a notifier registered for every IOMMU that a transaction has
passed through, so that we can flush the TLB appropriately
when any of the IOMMUs change their mappings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-5-peter.maydell@linaro.org
|
|
The API for cpu_transaction_failed() says that it takes the physical
address for the failed transaction. However we were actually passing
it the offset within the target MemoryRegion. We don't currently
have any target CPU implementations of this hook that require the
physical address; fix this bug so we don't get confused if we ever
do add one.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611125633.32755-3-peter.maydell@linaro.org
|
|
The 'addr' field in the CPUIOTLBEntry struct has a rather non-obvious
use; add a comment documenting it (reverse-engineered from what
the code that sets it is doing).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611125633.32755-2-peter.maydell@linaro.org
|
|
* Linux header upgrade (Peter)
* firmware.json definition (Laszlo)
* IPMI migration fix (Corey)
* QOM improvements (Alexey, Philippe, me)
* Memory API cleanups (Jay, me, Tristan, Peter)
* WHPX fixes and improvements (Lucian)
* Chardev fixes (Marc-André)
* IOMMU documentation improvements (Peter)
* Coverity fixes (Peter, Philippe)
* Include cleanup (Philippe)
* -clock deprecation (Thomas)
* Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao)
* Configurability improvements (me)
# gpg: Signature made Fri 01 Jun 2018 17:42:13 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (56 commits)
hw: make virtio devices configurable via default-configs/
hw: allow compiling out SCSI
memory: Make operations using MemoryRegionIoeventfd struct pass by pointer.
char: Remove unwanted crlf conversion
qdev: Remove DeviceClass::init() and ::exit()
qdev: Simplify the SysBusDeviceClass::init path
hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init
hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init
target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME
Update Linux headers to 4.17-rc6
target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED
scripts/update-linux-headers: Handle kernel license no longer being one file
scripts/update-linux-headers: Handle __aligned_u64
virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere
gdbstub: Prevent fd leakage
docs/interop: add "firmware.json"
ipmi: Use proper struct reference for KCS vmstate
vmstate: Add a VSTRUCT type
tcg: remove softfloat from --disable-tcg builds
qemu-options: Mark the non-functional -clock option as deprecated
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Code change produced with:
$ git grep '#include "exec/address-spaces.h"' accel | \
cut -d: -f-1 | \
xargs egrep -L "(get_system_|address_space_)" | \
xargs sed -i.bak '/#include "exec\/address-spaces.h"/d'
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-3-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_translate()
and address_space_translate_cached(). Callers either have an
attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-4-peter.maydell@linaro.org
|
|
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to tb_invalidate_phys_addr().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180521140402.23318-3-peter.maydell@linaro.org
|
|
Re-run Coccinelle script scripts/coccinelle/return_directly.cocci
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
ppc part
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Usually the logging of the CPU state produced by -d cpu is sufficient
to diagnose problems, but sometimes you want to see the state of
the floating point registers as well. We don't want to enable that
by default as it adds a lot of extra data to the log; instead,
allow it to be optionally enabled via -d fpu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180510130024.31678-1-peter.maydell@linaro.org
|
|
'remotes/pmaydell/tags/pull-target-arm-20180510' into staging
target-arm queue:
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
# gpg: Signature made Thu 10 May 2018 18:44:34 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits)
target/arm: Clear SVE high bits for FMOV
target/arm: Fix float16 to/from int16
target/arm: Implement vector shifted FCVT for fp16
target/arm: Implement vector shifted SCVF/UCVF for fp16
target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only
target/arm: Implement CAS and CASP
target/arm: Fill in disas_ldst_atomic
target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode
target/riscv: Use new atomic min/max expanders
tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add
tcg: Introduce atomic helpers for integer min/max
target/xtensa: Use new min/max expanders
target/arm: Use new min/max expanders
tcg: Introduce helpers for integer min/max
atomic.h: Work around gcc spurious "unused value" warning
make sure that we aren't overwriting mc->get_hotplug_handler by accident
arm/boot: split load_dtb() from arm_load_kernel()
platform-bus-device: use device plug callback instead of machine_done notifier
pc: simplify MachineClass::get_hotplug_handler handling
softfloat: Handle default NaN mode after pickNaNMulAdd, not before
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# target/riscv/translate.c
|
|
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Given that this atomic operation will be used by both risc-v
and aarch64, let's not duplicate code across the two targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
While at it, use int for both num_insns and max_insns to make
sure we have same-type comparisons.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
A mistake in the type passed to sizeof, that happens to work
when the out-of-line fallback itself is using host vectors,
but fails when using only the base types.
Tested-by: Emilio G. Cota <cota@braap.org>
Reported-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We have confused the number of instructions that have been
executed in the TB with the number of instructions needed
to repeat the I/O instruction.
We have used cpu_restore_state_from_tb, which means that
the guest pc is pointing to the I/O instruction. The only
time the answer to the later question is not 1 is when
MIPS or SH4 need to re-execute the branch for the delay
slot as well.
We must rely on cpu->cflags_next_tb to generate the next TB,
as otherwise we have a race condition with other guest cpus
within the TB cache.
Fixes: 0790f86861079b1932679d0f011e431aaf4ee9e2
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180319031545.29359-1-richard.henderson@linaro.org>
Tested-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
cpu_io_recompile() function was broken by
the commit 9b990ee5a3cc6aa38f81266fb0c6ef37a36c45b9. Instead of regenerating
the block starting from PC of the original block, it just set the instruction
counter for TCG. In most cases this was unnoticed, but in icount mode
there was an exception for incorrect usage of CF_LAST_IO flag.
This patch recovers recompilation of the original block and also
configures translation for executing single IO instruction which
caused a recompilation.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20180227095338.1060.27385.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
|
|
Function cpu_handle_interrupt calls cc->cpu_exec_interrupt to process
pending hardware interrupts. Under the hood cpu_exec_interrupt uses
cpu->exception_index to pass information to the internal function which
is usually common for exception and interrupt processing.
But this value is not reset after return and may be processed again
by cpu_handle_exception. This does not happen due to overwriting
the exception_index at the end of cpu_handle_interrupt.
But this branch may also overwrite the valid exception_index in some cases.
Therefore this patch:
1. resets exception_index just after the call to cpu_exec_interrupt
2. prevents overwriting the meaningful value of exception_index
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180227095140.1060.61357.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
|
|
Use dup to convert a non-constant scalar to a third vector.
Add addition, multiplication, and logical operations with an immediate.
Add addition, subtraction, multiplication, and logical operations with
a non-constant scalar. Allow for the front-end to build operations in
which the scalar operand comes first.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
No vector ops as yet. SSE only has direct support for 8- and 16-bit
saturation; handling 32- and 64-bit saturation is much more expensive.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Opcodes are added for scalar and vector shifts, but considering the
varied semantics of these do not expose them to the front ends. Do
go ahead and provide them in case they are needed for backend expansion.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We dropped support for ia64 host CPUs in the 2.11 release (removing
the TCG backend for it, and advertising the support as being
completely removed in the changelog). However there are a few bits
and pieces of code still floating about. Remove those, too.
We can drop the check in configure for "ia64 or hppa host?"
entirely, because we don't support hppa hosts either any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1516897189-11035-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
|
|
If multiple guest threads in user-mode emulation write to a
page which QEMU has marked read-only because of cached TCG
translations, the threads can race in page_unprotect:
* threads A & B both try to do a write to a page with code in it at
the same time (ie which we've made non-writeable, so SEGV)
* they race into the signal handler with this faulting address
* thread A happens to get to page_unprotect() first and takes the
mmap lock, so thread B sits waiting for it to be done
* A then finds the page, marks it PAGE_WRITE and mprotect()s it writable
* A can then continue OK (returns from signal handler to retry the
memory access)
* ...but when B gets the mmap lock it finds that the page is already
PAGE_WRITE, and so it exits page_unprotect() via the "not due to
protected translation" code path, and wrongly delivers the signal
to the guest rather than just retrying the access
In particular, this meant that trying to run 'javac' in user-mode
emulation would fail with a spurious guest SIGSEGV.
Handle this by making page_unprotect() assume that a call for a page
which is already PAGE_WRITE is due to a race of this sort and return
a "fault handled" indication.
Since this would cause an infinite loop if we ever called
page_unprotect() for some other kind of fault than "write failed due
to bad access permissions", tighten the condition in
handle_cpu_signal() to check the signal number and si_code, and add a
comment so that if somebody does ever find themselves debugging an
infinite loop of faults they have some clue about why.
(The trick for identifying the correct setting for
current_tb_invalidated for thread B (needed to handle the precise-SMC
case) is due to Richard Henderson. Paolo Bonzini suggested just
relying on si_code rather than trying anything more complicated.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1511879725-9576-3-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Currently all the architecture/OS specific cpu_signal_handler()
functions call handle_cpu_signal() without passing it the
siginfo_t. We're going to want that so we can look at the si_code
to determine whether this is a SEGV_ACCERR access violation or
some other kind of fault, so change the functions to pass through
the pointer to the siginfo_t rather than just the si_addr value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1511879725-9576-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20171217055023.29225-1-pbonzini@redhat.com>
[rth: Also change the Chain logging in helper_lookup_tb_ptr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The conditional memory barrier not only looks strange but actually is
wrong.
On s390x, I can reproduce interrupts via cpu_interrupt() not leading to
a proper kick out of emulation every now and then. cpu_interrupt() is
especially used for inter CPU communication via SIGP (esp. external
calls and emergency interrupts).
With this patch, I was not able to reproduce. (esp. no stalls or hangs
in the guest).
My setup is s390x MTTCG with 16 VCPUs on 8 CPU host, running make -j16.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171129191319.11483-1-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
exec: housekeeping (funny since 02d0e095031)
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The cpu-exec-common.c file includes memory-internal.h, but it doesn't
actually use anything from that header. Remove the unnecessary include.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
To do a write to memory that is marked as notdirty, we need
to invalidate any TBs we have cached for that memory, and
update the cpu physical memory dirty flags for VGA and migration.
The slowpath code in notdirty_mem_write() does all this correctly,
but the new atomic handling code in atomic_mmu_lookup() doesn't
do anything at all, it just clears the dirty bit in the TLB.
The effect of this bug is that if the first write to a notdirty
page for which we have cached TBs is by a guest atomic access,
we fail to invalidate the TBs and subsequently will execute
incorrect code. This can be seen by trying to run 'javac' on AArch64.
Use the new notdirty_call_before() and notdirty_call_after()
functions to correctly handle the update to notdirty memory
in the atomic codepath.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1511201308-23580-3-git-send-email-peter.maydell@linaro.org
|
|
This reverts commit e01cecabf3e04d22340d7e8b3616ef051c42c891,
which breaks booting of aarch64 Linux images.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Miscellaneous bugfixes
# gpg: Signature made Wed 15 Nov 2017 15:27:25 GMT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
fix scripts/update-linux-headers.sh here document
exec: Do not resolve subpage in mru_section
util/stats64: Fix min/max comparisons
cpu-exec: avoid cpu_exec_nocache infinite loop with record/replay
cpu-exec: don't overwrite exception_index
vhost-user-scsi: add missing virtqueue_size param
target-i386: adds PV_TLB_FLUSH CPUID feature bit
thread-posix: fix qemu_rec_mutex_trylock macro
Makefile: simpler/faster "make help"
ioapic/tracing: Remove last DPRINTFs
Enable 8-byte wide MMIO for 16550 serial devices
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When we handle a signal from a fault within a user-only memory helper,
we cannot cpu_restore_state with the PC found within the signal frame.
Use a TLS variable, helper_retaddr, to record the unwind start point
to find the faulting guest insn.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This patch ensures that icount_decr.u32.high is clear before calling
cpu_exec_nocache when exception is pending. Because the exception is
caused by the first instruction in the block and it cannot be executed
without resetting the flag.
There are two parts in the fix. First, clear icount_decr.u32.high in
cpu_handle_interrupt (just before processing the "dependent" request,
stored in cpu->interrupt_request or cpu->exit_request) rather than
cpu_loop_exec_tb; this ensures that cpu_handle_exception is always
reached with zero icount_decr.u32.high unless another interrupt has
happened in the meanwhile.
Second, try to cause the exception at the beginning of
cpu_handle_exception, and exit immediately if the TB cannot
execute. With this change, interrupts are processed and
cpu_exec_nocache can make process.
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20171114081818.27640.33165.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch adds a condition before overwriting exception_index fiels.
It is needed when exception_index is already set to some meaningful value.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20171114081812.27640.26372.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
