aboutsummaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)Author
2020-01-23qemu-nbd: Convert invocation documentation to rSTPeter Maydell
The qemu-nbd documentation is currently in qemu-nbd.texi in Texinfo format, which we present to the user as: * a qemu-nbd manpage * a section of the main qemu-doc HTML documentation Convert the documentation to rST format, and present it to the user as: * a qemu-nbd manpage * part of the interop/ Sphinx manual This follows the same pattern as commit 27a296fce982 did for the qemu-ga manpage. All the content of the old manpage is retained, except that I have dropped the "This is free software; see the source for copying conditions. There is NO warranty..." text that was in the old AUTHOR section; Sphinx's manpage builder doesn't expect that much text in the AUTHOR section, and since none of our other manpages have it it seems easiest to delete it rather than try to figure out where else in the manpage to put it. The only other textual change is that I have had to give the --nocache option its own description ("Equivalent to --cache=none") because Sphinx doesn't have an equivalent of using item/itemx to share a description between two options. Some minor aspects of the formatting have changed, to suit what is easiest for Sphinx to output. (The most notable is that Sphinx option section option syntax doesn't support '--option foo=bar' with bar underlined rather than bold, so we have to switch to '--option foo=BAR' instead.) The contents of qemu-option-trace.texi are now duplicated in docs/interop/qemu-option-trace.rst.inc, until such time as we complete the conversion of the other files which use it; since it has had only 3 changes in 3 years, this shouldn't be too awkward a burden. (We use .rst.inc because if this file fragment has a .rst extension then Sphinx complains about not seeing it in a toctree.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200116141511.16849-2-peter.maydell@linaro.org
2020-01-21Makefile: add missing mkdir MANUAL_BUILDDIRStefan Hajnoczi
The MANUAL_BUILDDIR directory is automatically created by sphinx-build for the other targets. The index.html target does not use sphinx-build so we must manually create the directory to avoid the following error: GEN docs/built/index.html /bin/sh: docs/built/index.html: No such file or directory Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200120163400.603449-1-stefanha@redhat.com Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-14Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-01-14' into ↵Peter Maydell
staging QAPI patches for 2020-01-14 # gpg: Signature made Tue 14 Jan 2020 10:15:22 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2020-01-14: qapi: Simplify QAPISchemaModularCVisitor qapi: Fix code generation for empty modules qapi: Proper intermediate representation for modules qapi: Generate command registration stuff into separate files tests/Makefile.include: Fix missing test-qapi-emit-events.[ch] qapi: Tweak "command returns a nice type" check for clarity Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-14qapi: Generate command registration stuff into separate filesMarkus Armbruster
Having to include qapi-commands.h just for qmp_init_marshal() is suboptimal. Generate it into separate files. This lets monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h include less. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191120182551.23795-4-armbru@redhat.com> [Typos in docs/devel/qapi-code-gen.txt fixed] Reviewed-by: Eric Blake <eblake@redhat.com>
2020-01-12docs: build an index page for the HTML docsStefan Hajnoczi
There is no index.html start page for the QEMU HTML documentation. An index page is needed so that documentation can be browsed easily on the web. This patch adds an index.html.in template file where the QEMU version number is expanded. It is written in HTML instead of using the existing sphinx (rST) and texi documentation generators because they are heavyweight and would make this harder. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20191219135620.1626608-1-stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-17Makefile: disable Sphinx nitpickingPeter Maydell
Turn off Sphinx nitpicking as a temporary (?) measure so sphinx builds complete even with warnings about missing references. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20190521122519.12573-11-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17configure: simplify vhost condition with KconfigMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17crypto: move common bits for all emulators to libqemuutilPaolo Bonzini
qcrypto_random_*, AES and qcrypto_init do not need to be linked as a whole and are the only parts that are used by user-mode emulation. Place them in libqemuutil, so that whatever needs them will pick them up automatically. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17build-sys: build vhost-user-gpu only if CONFIG_TOOLSMarc-André Lureau
vhost-user-gpu is always built and installed, but it is not part of the emulator proper. Cut it if --disable-tools is specified. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17Makefile: remove unused variablesPaolo Bonzini
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-02virtfs-proxy-helper: switch from libcap to libcap-ngPaolo Bonzini
virtfs-proxy-helper is the only user of libcap; everyone else is using the simpler libcap-ng API. Switch and remove the configure code to detect libcap. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> [groug: - drop remaining -lcap from Makefile - fix error message in configure] Signed-off-by: Greg Kurz <groug@kaod.org>
2019-11-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-pull-request' into staging Trivial fixes (20191112) ivshmem-server, error messages (numa, qom) and Makefile (bios-microvm) fixes # gpg: Signature made Tue 12 Nov 2019 10:04:03 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: ivshmem-server: Terminate also on SIGINT ivshmem-server: Clean up shmem on shutdown numa: Add missing \n to error message qom: Fix error message in object_class_property_add() Makefile: install bios-microvm like other binary blobs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-12Makefile: install bios-microvm like other binary blobsBruce Rogers
Commit 0d5fae3e52e introduced bios-microvm.bin but forgot to add it to the list of blobs being installed. Add it to the list of BLOBS that get installed. Fixes: 0d5fae3e52e "roms: add microvm-bios (qboot) as binary" Signed-off-by: Bruce Rogers <brogers@suse.com> [PMD: Reworded description] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-Id: <20191102114346.6445-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-11configure: Only decompress EDK2 blobs for X86/ARM targetsPhilippe Mathieu-Daudé
The EDK2 firmware blobs only target the X86/ARM architectures. Define the DECOMPRESS_EDK2_BLOBS variable and only decompress the blobs when the variable exists. See also: 536d2173b2b ("roms: build edk2 firmware binaries ...") Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191108114531.21518-2-philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-11-05Makefile: Fix config-devices.mak not regenerated when Kconfig updatedPhilippe Mathieu-Daudé
When hw/$DIR/Kconfig is changed, the corresponding generated hw/$DIR/config-devices.mak is not being updated. Fix this by including all the hw/*/Kconfig files to the prerequisite names of the rule generating the config-devices.mak files. Fixes: e0e312f3525a (build: switch to Kconfig) Reported-by: Peter Maydell <peter.maydell@linaro.org> Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-10-28plugin: add API symbols to qemu-plugins.symbolsEmilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: moved into plugins] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28plugin: add core codeEmilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: moved directory and merged various fixes] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-22qapi: Split up scripts/qapi/common.pyMarkus Armbruster
The QAPI code generator clocks in at some 3100 SLOC in 8 source files. Almost 60% of the code is in qapi/common.py. Split it into more focused modules: * Move QAPISchemaPragma and QAPISourceInfo to qapi/source.py. * Move QAPIError and its sub-classes to qapi/error.py. * Move QAPISchemaParser and QAPIDoc to parser.py. Use the opportunity to put QAPISchemaParser first. * Move check_expr() & friends to qapi/expr.py. Use the opportunity to put the code into a more sensible order. * Move QAPISchema & friends to qapi/schema.py * Move QAPIGen and its sub-classes, ifcontext, QAPISchemaModularCVisitor, and QAPISchemaModularCVisitor to qapi/gen.py * Delete camel_case(), it's unused since commit e98859a9b9 "qapi: Clean up after recent conversions to QAPISchemaVisitor" A number of helper functions remain in qapi/common.py. I considered moving the code generator helpers to qapi/gen.py, but decided not to. Perhaps we should rewrite them as methods of QAPIGen some day. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20191018074345.24034-7-armbru@redhat.com> [Add "# -*- coding: utf-8 -*-" lines]
2019-10-17sphinx: Use separate doctree directories for different buildersEduardo Habkost
sphinx-build is buggy when multiple processes are using the same doctree directory in parallel. See the 3-year-old Sphinx bug report at: https://github.com/sphinx-doc/sphinx/issues/2946 Instead of avoiding parallel builds or adding some kind of locking, I'm using the simplest solution: just using a different doctree cache for each builder. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20191014150133.14318-1-ehabkost@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-04spapr: Stop providing RTAS blobAlexey Kardashevskiy
SLOF implements one itself so let's remove it from QEMU. It is one less image and simpler setup as the RTAS blob never stays in its initial place anyway as the guest OS always decides where to put it. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-09-26configure: preserve PKG_CONFIG for subdir buildsAlex Bennée
The slirp sub-module complains about not being able to find the glib library on cross-compiles because it is using the default pkg-config tool (which isn't installed in our cross-build docker images). Preserve PKG_CONFIG in our host config and pass it down to slirp. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-20Makefile: Fix in-tree builds when Sphinx is availablePeter Maydell
In commit 27a296fce9821e we switched the qemu-ga manpage over to being built from Sphinx. The makefile rules for this were correct for an out-of-tree build, but break for in-tree builds if Sphinx is present and we're trying to build the documentation. Specifically, because Sphinx refuses to build output files into the same directory as its sources, for an in-tree build we tell it to build into a subdirectory docs/built, and set up a makefile variable MANUAL_BUILDDIR indicating where the docs are going. The makefile rule telling Make how to build qemu-ga.8 correctly used this variable, but the lines adding qemu-ga.8 to the list of DOCS to be built and the 'make install' rune did not. The effect was that for an in-tree build we told Make to build 'docs/interop/qemu-ga.8' but did not provide a specific rule for doing so, which caused Make to fall back to the old rules.make rule for building any "%.8" file. Make tried to invoke texi2pod with a bogus command line, resulting in the error: GEN docs/interop/qemu-ga.8 No filename or title make: *** [rules.mak:394: docs/interop/qemu-ga.8] Fix this by using $(MANUAL_BUILDDIR) when constructing the list of DOCS files we want to build and also in the source file name we install for 'make install'. (Among other things, this broke the Shippable CI builds.) Fixes: 27a296fce9821e Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190919155957.12618-1-peter.maydell@linaro.org Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2019-09-13qemu-ga: Convert invocation documentation to rSTPeter Maydell
The qemu-ga documentation is currently in qemu-ga.texi in Texinfo format, which we present to the user as: * a qemu-ga manpage * a section of the main qemu-doc HTML documentation Convert the documentation to rST format, and present it to the user as: * a qemu-ga manpage * part of the interop/ Sphinx manual Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 20190905131040.8350-1-peter.maydell@linaro.org
2019-09-10tests/tcg: move configuration to a sub-shell scriptPaolo Bonzini
Avoid the repeated inclusions of config-target.mak, which have risks of namespace pollution, and instead build minimal configuration files in a configuration script. The same configuration files can also be included in Makefile and Makefile.qemu [AJB 10/09/19] In the original PR this had inadvertently enabled tests for ppc64abi32. However as the rest of the multiarch tests work rather than disabling the otherwise correctly functioning build I've just skipped the failing linux-test test. For some reason I can't debug it with TCG so I'm leaving that to the PPC maintainers to look at. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20190807143523.15917-4-pbonzini@redhat.com> [AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Richard Henderson <rth@twiddle.net>
2019-08-22tests/docker: add podman supportMarc-André Lureau
Allow to specify the container engine to run with ENGINE variable. By default, ENGINE=auto and will select either podman or docker. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-21configure: define CONFIG_TOOLS herePaolo Bonzini
Defining CONFIG_TOOLS on the basis of $(TOOLS) has the disadvantage of including it also if e.g. qemu-ga is requested. The correct information is available in configure, define it there. This also has the benefit of not installing the manpages for block layer tools if the only "tool" being built is the guest agent. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21qemu-ga: clean up TOOLS variablePaolo Bonzini
qemu-ga is included in the TOOLS variable without the .exe suffix, and this is then worked around twice in the Makefile. Do the right thing in configure instead. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-03Makefile: remove DESTDIR from firmware file contentOlaf Hering
The resulting firmware files should only contain the runtime path. Fixes commit 26ce90fde5c ("Makefile: install the edk2 firmware images and their descriptors") Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190530192812.17637-1-olaf@aepfle.de> Fixes: https://bugs.launchpad.net/qemu/+bug/1838703 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-23buildsys: The NSIS Windows build requires qemu-nsis.bmp installedPhilippe Mathieu-Daudé
The qemu-nsis.bmp file was not listed with the other blobs, thus not installed in the ${BINDIR} location. This fixes: $ make installer [...] (cd /tmp/qemu-nsis; \ for i in qemu-system-*.exe; do \ arch=${i%.exe}; \ arch=${arch#qemu-system-}; \ echo Section \"$arch\" Section_$arch; \ echo SetOutPath \"\$INSTDIR\"; \ echo File \"\${BINDIR}\\$i\"; \ echo SectionEnd; \ done \ ) >/tmp/qemu-nsis/system-emulations.nsh makensis -V2 -NOCD \ -DCONFIG_DOCUMENTATION="y" \ \ -DBINDIR="/tmp/qemu-nsis" \ \ -DSRCDIR="/home/phil/source/qemu" \ -DOUTFILE="qemu-setup-4.0.90.exe" \ -DDISPLAYVERSION="4.0.90" \ /home/phil/source/qemu/qemu.nsi File: "/tmp/qemu-nsis\*.bmp" -> no files found. Usage: File [/nonfatal] [/a] ([/r] [/x filespec [...]] filespec [...] | /oname=outfile one_file_only) Error in script "/home/phil/source/qemu/qemu.nsi" on line 122 -- aborting creation process Makefile:1077: recipe for target 'qemu-setup-4.0.90.exe' failed make: *** [qemu-setup-4.0.90.exe] Error 1 Fixes: https://bugs.launchpad.net/bugs/1836453 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190715174817.18981-8-philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-07-23buildsys: The NSIS Windows build requires the documentation installedPhilippe Mathieu-Daudé
This fixes: $ make installer [...] (cd /tmp/qemu-nsis; \ for i in qemu-system-*.exe; do \ arch=${i%.exe}; \ arch=${arch#qemu-system-}; \ echo Section \"$arch\" Section_$arch; \ echo SetOutPath \"\$INSTDIR\"; \ echo File \"\${BINDIR}\\$i\"; \ echo SectionEnd; \ done \ ) >/tmp/qemu-nsis/system-emulations.nsh makensis -V2 -NOCD \ \ -DCONFIG_GTK="y" \ -DBINDIR="/tmp/qemu-nsis" \ \ -DSRCDIR="/source/qemu" \ -DOUTFILE="qemu-setup-4.0.90.exe" \ -DDISPLAYVERSION="4.0.90" \ /source/qemu/qemu.nsi File: "/tmp/qemu-nsis\qemu-doc.html" -> no files found. Usage: File [/nonfatal] [/a] ([/r] [/x filespec [...]] filespec [...] | /oname=outfile one_file_only) Error in script "/source/qemu/qemu.nsi" on line 173 -- aborting creation process make: *** [Makefile:1080: qemu-setup-4.0.90.exe] Error 1 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190715174817.18981-7-philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-07-22contrib/elf2dmp: Build download.o with CURL_CFLAGSPeter Maydell
contrib/elf2dmp has a source file which uses curl/curl.h; although we link the final executable with CURL_LIBS, we forgot to build this source file with CURL_CFLAGS, so if the curl header is in a place that's not already on the system include path then it will fail to build. Add a line specifying the cflags needed for download.o; while we are here, bring the specification of the libs into line with this, since using a per-object variable setting is preferred over adding them to the final executable link line. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190719100955.17180-1-peter.maydell@linaro.org
2019-07-18roms: Add OpenSBI version 0.4Alistair Francis
Add OpenSBI version 0.4 as a git submodule and as a prebult binary. OpenSBI (https://github.com/riscv/opensbi) aims to provide an open-source reference implementation of the RISC-V Supervisor Binary Interface (SBI) specifications for platform-specific firmwares executing in M-mode. For all supported platforms, OpenSBI provides several runtime firmware examples. These example firmwares can be used to replace the legacy riscv-pk bootloader and enable the use of well-known bootloaders such as U-Boot. OpenSBI is distributed under the terms of the BSD 2-clause license ("Simplified BSD License" or "FreeBSD License", SPDX: BSD-2-Clause). OpenSBI source code also contains code reused from other projects desribed here: https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md. In this case all of the code we are using from OpenSBI is BSD 2-clause as we aren't using the Kendryte code (Apache-2.0) with QEMU and libfdt is dual licensed as BSD 2-clause (and GPL-2.0+). OpenSBI isn't being linked with QEMU either it is just being included with QEMU. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-15Makefile: Fix missing dependency of on qemu-tech.texiMarkus Armbruster
The qemu-doc.{html,info,pdf,txt} depend on qemu-doc.texi and its include files. Except qemu-tech.texi is missing. Has always been missing as far as I can see. Fix it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190715055736.15214-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-15Makefile: Fix "make install" when "make all" needs workMarkus Armbruster
Until recently, target install used to recurse into target directories in its recipe: it ran make install in a for-loop. Since target install depends on target all, this trivially ensured we run the sub-make install only after completing target all. Commit 1338a4b "Makefile: Reuse all's recursion machinery for clean and install" moved the target recursion to dependencies. That's good (the commit message explains why), but I forgot to add dependencies to ensure make runs the sub-make install only after completing target all. Do that now. Fixes: 1338a4b72659ce08eacb9de0205fe16202a22d9c Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190712055935.23061-1-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-07-09Makefile: Fix "make clean" in "unconfigured" source directoryMarkus Armbruster
Recent commit "Makefile: Reuse all's recursion machinery for clean and install" broke targets clean and distclean in the source directory before running configure: $ make clean LD recurse-clean.mo cc: fatal error: no input files compilation terminated. make: *** [rules.mak:118: recurse-clean.mo] Error 1 Root cause is missing .PHONY. Fix that. Fixes: 1338a4b72659ce08eacb9de0205fe16202a22d9c Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-04Makefile: Rename the 'vm-test' target as 'vm-help'Philippe Mathieu-Daudé
We already have 'make check-help', use the 'make vm-help' form to display helps about VM testing. Keep the old target to not bother old customs. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190531064341.29730-1-philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-07-04Merge remote-tracking branch 'remotes/armbru/tags/pull-build-2019-07-02-v2' ↵Peter Maydell
into staging Build system patches for 2019-07-02 # gpg: Signature made Wed 03 Jul 2019 12:44:28 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-build-2019-07-02-v2: Makefile: Reuse all's recursion machinery for clean and install Makefile: Rename targets for make recursion Makefile: Drop bogus cleaning of $(ALL_SUBDIRS)/qemu-options.def Makefile: Remove code to smooth transition to config.status Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03Makefile: Reuse all's recursion machinery for clean and installMarkus Armbruster
Targets "clean" and "install" run make recursively in a for loop. This ignores -j and -k. Target "all" depends on SUBDIR/all to recurse into each SUBDIR. Behaves nicely with -j and -k. Put that to use for "clean" and "install": depend on SUBDIR/clean or SUBDIR/install, respectively, and delete the loop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190528082308.22032-5-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-03Makefile: Rename targets for make recursionMarkus Armbruster
We make a few sub-directories recursively, in particular $(TARGET_DIRS). For goal "all", we do it the nice way: "all" has a prerequisite subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make recursively. Behaves nicely with -j and -k. For other goals such as "clean" and "install", the recipe runs make recursively in a for loop. Ignores -j and -k. The next commit will fix that for "clean" and "install". This commit prepares the ground by renaming the targets we use for "all" to include the goal for the sub-make. This will permit reusing them for goals other than "all". Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename to T/all, and declare phony. Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default goal is "all" for all R. Rename to pc-bios/R/all, and declare phony. The remainder are renamed just for consistency. Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to dtc/all, and declare phony. Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE) in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony. Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and declare phony. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-4-armbru@redhat.com> [Add compatibility gunk to keep make working across the rename]
2019-07-03Add ati vgabios to INSTALL_BLOBS.Gerd Hoffmann
Fixes: 0cca7e7bfd6c81cc3c29ec2b3a0a98954c4ba71a Reported-by: Bruce Rogers <BROGERS@suse.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20190703045212.31039-1-kraxel@redhat.com
2019-07-02Makefile: Drop bogus cleaning of $(ALL_SUBDIRS)/qemu-options.defMarkus Armbruster
When commit df2943ba3c7 moved "rm -f qemu-options.def" from distclean to clean, it also added "rm -f $$d/qemu-options.def" to the for d in $(ALL_SUBDIRS) loop. That file doesn't exist. Remove the mistaken rm. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-3-armbru@redhat.com>
2019-07-02Makefile: Remove code to smooth transition to config.statusMarkus Armbruster
When commit bdf523e6923 made configure generate config.status, it added a fallback to Makefile to smooth the transition, with a TODO "code can be removed after QEMU 1.7." It's been more than five years. Remove it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-2-armbru@redhat.com>
2019-07-02Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request No user-visible changes. # gpg: Signature made Fri 28 Jun 2019 14:13:41 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: build: use $(DESTDIR)x instead of $(DESTDIR)/x Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-28build: use $(DESTDIR)x instead of $(DESTDIR)/xStefan Hajnoczi
The GNU make manual[1] demonstrates $(DESTDIR)$(bindir)/foo and QEMU mostly follows that. There are just a few instances of $(DESTDIR)/$(bindir)/foo. Fix these inconsistencies. [1] https://www.gnu.org/software/make/manual/html_node/DESTDIR.html Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190521145318.12787-1-stefanha@redhat.com Message-Id: <20190521145318.12787-1-stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-06-26configure: disallow spaces and colons in source path and build pathAntonio Ospite
The configure script breaks when the qemu source directory is in a path containing white spaces, in particular the list of targets is not correctly generated when calling "./configure --help" because of how the default_target_list variable is built. In addition to that, *building* qemu from a directory with spaces breaks some assumptions in the Makefiles, even if the original source path does not contain spaces like in the case of an out-of-tree build, or when symlinks are involved. To avoid these issues, refuse to run the configure script and the Makefile if there are spaces or colons in the source path or the build path, taking as inspiration what the kbuild system in linux does. Buglink: https://bugs.launchpad.net/qemu/+bug/1817345 Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Antonio Ospite <antonio.ospite@collabora.com> Message-Id: <20190526144747.30019-3-ao2@ao2.it> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-17docs: Build and install specs manualPeter Maydell
Now we have some rST format docs in the docs/specs/ manual, we should actually build and install it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-id: 20190610152444.20859-3-peter.maydell@linaro.org
2019-05-30Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190529-pull-request' ↵Peter Maydell
into staging vga: add vhost-user-gpu. # gpg: Signature made Wed 29 May 2019 05:40:02 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20190529-pull-request: hw/display: add vhost-user-vga & gpu-pci virtio-gpu: split virtio-gpu-pci & virtio-vga virtio-gpu: split virtio-gpu, introduce virtio-gpu-base spice-app: fix running when !CONFIG_OPENGL contrib: add vhost-user-gpu util: compile drm.o on posix virtio-gpu: add a pixman helper header virtio-gpu: add bswap helpers header vhost-user: add vhost_user_gpu_set_socket() virtio-gpu: add sanity check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-29contrib: add vhost-user-gpuMarc-André Lureau
Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is associated with a vhost-user-gpu device. Various TODO and nice to have items: - multi-head support - crash & resume handling - accelerated rendering/display that avoids the waiting round trips - edid support Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-28Makefile: include per-target build directories in coverage reportAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28Makefile: fix coverage-report reference to BUILD_DIRAlex Bennée
Commit 337f2311f actually claimed to do this in the commit log but didn't actually. Oops. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-22 10:28:01 +0000