aboutsummaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)Author
2020-05-15Makefile: List fuzz targets in 'make help'Philippe Mathieu-Daudé
List softmmu fuzz targets in 'make help' output: $ make help ... Architecture specific targets: aarch64-softmmu/all - Build for aarch64-softmmu aarch64-softmmu/fuzz - Build fuzzer for aarch64-softmmu alpha-softmmu/all - Build for alpha-softmmu alpha-softmmu/fuzz - Build fuzzer for alpha-softmmu arm-softmmu/all - Build for arm-softmmu arm-softmmu/fuzz - Build fuzzer for arm-softmmu ... Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200514143433.18569-3-philmd@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-04-29Makefile: Drop unused, broken target recurse-fuzzMarkus Armbruster
Target recurse-fuzz depends on pc-bios/optionrom/fuzz, which can't be made. It's not used anywhere. Added in commit c621dc3e01c, looks like cargo cult. Delete. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200424071142.3525-2-armbru@redhat.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
2020-04-14configure: Honour --disable-werror for SphinxPeter Maydell
If we are not making warnings fatal for compilation, make them non-fatal when building the Sphinx documentation also. (For instance Sphinx 3.0 warns about some constructs that older versions were happy with, which is a build failure if we use the warnings-as-errors flag.) This provides a workaround at least for LP:1872113. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200411182934.28678-2-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2020-03-28configure: Drop adjustment of textsegRichard Henderson
This adjustment was random and unnecessary. The user mode startup code in probe_guest_base() will choose a value for guest_base that allows the host qemu binary to not conflict with the guest binary. With modern distributions, this isn't even used, as the default is PIE, which does the same job in a more portable way. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- v2: Remove mention of config-host.ld from make distclean
2020-03-17Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Bugfixes all over the place * get/set_uint cleanups (Felipe) * Lock guard support (Stefan) * MemoryRegion ownership cleanup (Philippe) * AVX512 optimization for buffer_is_zero (Robert) # gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (62 commits) hw/arm: Let devices own the MemoryRegion they create hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions hw/arm/stm32: Use memory_region_init_rom() with read-only regions hw/char: Let devices own the MemoryRegion they create hw/riscv: Let devices own the MemoryRegion they create hw/dma: Let devices own the MemoryRegion they create hw/display: Let devices own the MemoryRegion they create hw/core: Let devices own the MemoryRegion they create scripts/cocci: Patch to let devices own their MemoryRegions scripts/cocci: Patch to remove unnecessary memory_region_set_readonly() scripts/cocci: Patch to detect potential use of memory_region_init_rom hw/sparc: Use memory_region_init_rom() with read-only regions hw/sh4: Use memory_region_init_rom() with read-only regions hw/riscv: Use memory_region_init_rom() with read-only regions hw/ppc: Use memory_region_init_rom() with read-only regions hw/pci-host: Use memory_region_init_rom() with read-only regions hw/net: Use memory_region_init_rom() with read-only regions hw/m68k: Use memory_region_init_rom() with read-only regions hw/display: Use memory_region_init_rom() with read-only regions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-16roms: opensbi: Add 32-bit firmware image for sifive_u machineBin Meng
Although the real world SiFive HiFive Unleashed board is a 64-bit hardware configuration, with QEMU it is possible to test 32-bit configuration with the same hardware features. This updates the roms Makefile to add the build rules for creating the 32-bit OpenSBI firmware image for sifive_u machine. A pre-built OpenSBI v0.6 image has been added as the default bios for 32-bit sifive_u machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-16Makefile: Let the 'help' target list the tools targetsPhilippe Mathieu-Daudé
List the name of the tool targets when calling 'make help': $ make help [...] Tools targets: qemu-ga - Build qemu-ga tool qemu-keymap - Build qemu-keymap tool elf2dmp - Build elf2dmp tool ivshmem-client - Build ivshmem-client tool ivshmem-server - Build ivshmem-server tool qemu-nbd - Build qemu-nbd tool qemu-img - Build qemu-img tool qemu-io - Build qemu-io tool qemu-edid - Build qemu-edid tool fsdev/virtfs-proxy-helper - Build virtfs-proxy-helper tool scsi/qemu-pr-helper - Build qemu-pr-helper tool Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16Makefile: Align 'help' target outputPhilippe Mathieu-Daudé
The 'help' target is displayed unaligned. Add a print-help function and use it. Now if someone want to change the indentation, there is a single place to modify. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-12Makefile: Allow for subdirectories in Sphinx manual dependenciesPeter Maydell
Currently we put 'docs/foo/*.rst' in the Make list of dependencies for the Sphinx 'foo' manual, which means all the files must be in the top level of that manual's directory. We'd like to be able to have subdirectories inside some of the manuals, so add 'docs/foo/*/*.rst' to the dependencies too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200309215818.2021-2-peter.maydell@linaro.org
2020-03-12Makefile: Make all Sphinx documentation depend on the extensionsPeter Maydell
Add the Python source files of our Sphinx extensions to the dependencies of the Sphinx manuals, so that if we edit the extension source code the manuals get rebuilt. Adding this dependency unconditionally means that we'll rebuild a manual even if it happens to not use the extension whose source file was changed, but this is simpler and less error prone, and it's unlikely that we'll be making frequent changes to the extensions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200306171749.10756-6-peter.maydell@linaro.org
2020-03-12Makefile: Remove redundant Texinfo related codePeter Maydell
The recent conversion of qemu-doc.texi to rST forgot a few stray bits of makefile code that are now redundant. Remove them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200306171749.10756-2-peter.maydell@linaro.org
2020-03-09build-sys: Move the print-variable rule to rules.makPhilippe Mathieu-Daudé
Currently the print-variable rule can only be used in the root directory: $ make print-vhost-user-json-y vhost-user-json-y= contrib/vhost-user-gpu/50-qemu-gpu.json tools/virtiofsd/50-qemu-virtiofsd.json $ make -C i386-softmmu print-obj-y make: Entering directory 'build/i386-softmmu' make: *** No rule to make target 'print-obj-y'. Stop. make: Leaving directory 'build/i386-softmmu' Move it to rules.mak so we can use it from other directories: $ make -C i386-softmmu print-obj-y make: Entering directory 'build/i386-softmmu' obj-y=qapi-introspect.o qapi-types-machine-target.o qapi-types-misc-target.o qapi-types.o qapi-visit-machine-target.o qapi-visit-misc-target.o qapi-visit.o qapi-events-machine-target.o qapi-events-misc-target.o qapi-events.o qapi-commands-machine-target.o qapi-commands-misc-target.o qapi-commands.o qapi-init-commands.o make: Leaving directory 'build/i386-softmmu' Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200306170456.21977-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-06qemu-storage-daemon: Add --monitor optionKevin Wolf
This adds and parses the --monitor option, so that a QMP monitor can be used in the storage daemon. The monitor offers commands defined in the QAPI schema at storage-daemon/qapi/qapi-schema.json. The --monitor options currently allows to create multiple monitors with the same ID. This part of the interface is considered unstable. We will reject such configurations as soon as we have a design for the monitor subsystem to perform these checks. (In the system emulator, we depend on QemuOpts rejecting duplicate IDs.) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-21-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06qemu-storage-daemon: Add --chardev optionKevin Wolf
This adds a --chardev option to the storage daemon that works the same as the -chardev option of the system emulator. The syntax of the --chardev option is still considered unstable. We want to QAPIfy it and will potentially make changes to its syntax while converting it. However, we haven't decided yet on a design for the QAPIfication, so QemuOpts will have to do for now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-14-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06qemu-storage-daemon: Add --blockdev optionKevin Wolf
This adds a --blockdev option to the storage daemon that works the same as the -blockdev option of the system emulator. In order to be able to link with blockdev.o, we also need to change stream.o from common-obj to block-obj, which is where all other block jobs already are. In contrast to the system emulator, qemu-storage-daemon options will be processed in the order they are given. The user needs to take care to refer to other objects only after defining them. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-7-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06qemu-storage-daemon: Add barebone toolKevin Wolf
This adds a new binary qemu-storage-daemon that doesn't yet do more than some typical initialisation for tools and parsing the basic command options --version, --help and --trace. Even though this doesn't add any options yet that create things (like --object or --blockdev), already document that we're planning to process them in the order they are given on the command line rather than trying (and failing, like vl.c) to resolve dependencies between options automatically. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-2-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06docs: Stop building qemu-docPeter Maydell
Stop building the old texinfo qemu-doc; all its contents are now available in the Sphinx-generated manuals and manpages. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-32-peter.maydell@linaro.org
2020-03-06docs: Generate qemu.1 manpage with SphinxPeter Maydell
Generate the qemu.1 manpage using Sphinx; we do this with a new top-level rst source file which is just the skeleton of the manpage and which includes .rst.inc fragments where it needs to incorporate sections from the larger HTML manuals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-30-peter.maydell@linaro.org
2020-03-06qemu-options.hx: Fix up the autogenerated rSTPeter Maydell
This commit contains hand-written fixes for some issues with the autogenerated rST fragments in qemu-options.hx: * Sphinx complains about the UTF-8 art table in the documentation of the -drive option. Replace it with a proper rST format table. * rST does not like definition list entries with no actual definition, but it is possible to work around this by putting a single escaped literal space as the definition line. * The "-g widthxheight" option documentation suffers particularly badly from losing the distinction between italics and fixed-width as a result of the auto conversion, so put it back in again. * The script missed some places that use the |qemu_system| etc macros and need to be marked up as parsed-literal blocks. * The script autogenerated an expanded out version of the contents of qemu-option-trace.texi; replace it with an qemu-option-trace.rst.inc include. This is sufficient that we can enable inclusion of the option documentation from invocation.rst. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-28-peter.maydell@linaro.org
2020-03-06hmp-commands-info.hx: Add rST documentation fragmentsPeter Maydell
Add the rST versions of the documentation fragments. Once we've converted fully from Texinfo to rST we can remove the ETEXI fragments; for the moment we need both. Note that most of the SRST fragments are 2-space indented so that the 'info foo' documentation entries appear as a sublist under the 'info' entry in the top level list. Again, all we need to do to put the documentation in the Sphinx manual is a one-line hxtool-doc invocation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-22-peter.maydell@linaro.org
2020-03-06hmp-commands.hx: Add rST documentation fragmentsPeter Maydell
Add the rST versions of the documentation fragments. Once we've converted fully from Texinfo to rST we can remove the ETEXI fragments; for the moment we need both. Since the only consumer of the hmp-commands hxtool documentation is the HTML manual, all we need to do for the monitor command documentation to appear in the Sphinx system manual is add the one line that invokes the hxtool extension on the .hx file. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-21-peter.maydell@linaro.org
2020-03-06docs/system: Convert qemu-cpu-models.texi to rSTKashyap Chamarthy
This doc was originally written by Daniel P. Berrangé <berrange@redhat.com>, introduced via commit[1]: 2544e9e4aa (docs: add guidance on configuring CPU models for x86, 2018-06-27). In this patch: - 1-1 conversion of Texinfo to rST, besides a couple of minor tweaks that are too trivial to mention. (Thanks to Stephen Finucane on IRC for the suggestion to use rST "definition lists" instead of bullets in some places.) Further modifications will be done via a separate patch. - rST and related infra changes: manual page generation, Makefile fixes, clean up references to qemu-cpu-models.texi, update year in the copyright notice, etc. [1] https://git.qemu.org/?p=qemu.git;a=commit;h=2544e9e4aa As part of the conversion, we use a more generic 'author' attribution for the manpage than we previously had, as agreed with the original author Dan Berrange. Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200228153619.9906-16-peter.maydell@linaro.org Message-id: 20200226113034.6741-15-pbonzini@redhat.com [Move macros to defs.rst.inc, split in x86 and MIPS parts, make qemu-cpu-models.rst a standalone document. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [PMM: Move defs.rst.inc setup to its own commit; fix minor issues with MAINTAINERS file updates; drop copyright date change; keep capitalization of "QEMU Project developers" consistent with other uses; minor Makefile fixups] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06docs: Create defs.rst.inc as a place to define substitutionsPeter Maydell
Rather than accumulating generally useful rST substitution definitions in individual rST files, create a defs.rst.inc where we can define these. To start with it has the |qemu_system| definition from qemu-block-drivers.rst. Add a comment noting a pitfall where putting literal markup in the definition of |qemu_system| makes it misrender manpage output; this means the point-of-use must handle the literal markup (which is almost always done by having it inside a parsed-literal block). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-15-peter.maydell@linaro.org
2020-03-06qemu-doc: move included files to docs/systemPaolo Bonzini
Since qemu-doc.texi is mostly including files from docs/system, move the existing include files there for consistency. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200228153619.9906-12-peter.maydell@linaro.org Message-id: 20200226113034.6741-12-pbonzini@redhat.com [PMM: update MAINTAINERS line for qemu-option-trace.texi] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06qemu-doc: move qemu-tech.texi into main sectionPaolo Bonzini
The only remaining content in qemu-tech.texi is a few paragraphs about managed start up options. Move them in the main section about full system emulation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200228153619.9906-11-peter.maydell@linaro.org Message-id: 20200226113034.6741-11-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06qemu-doc: split qemu-doc.texi in multiple filesPaolo Bonzini
In order to facilitate the reorganization of qemu-doc.texi content, as well as the conversion to rST/Sphinx, split it in multiple .texi files that are included from docs/system. The "other devices" section is renamed to ivshmem and placed last. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200228153619.9906-6-peter.maydell@linaro.org Message-id: 20200226113034.6741-6-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06qemu-doc: split CPU models doc between MIPS and x86 partsPaolo Bonzini
The MIPS CPU models end up in the middle of the PC documentation. Move them to a separate file so that they can be placed in the right section. The man page still includes both x86 and MIPS content. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200228153619.9906-5-peter.maydell@linaro.org Message-id: 20200226113034.6741-5-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06qemu-doc: convert user-mode emulation to a separate Sphinx manualPaolo Bonzini
The final addition to the set of QEMU manuals is the user-mode emulation manual, which right now is included in qemu-doc.texi. Extract it and convert it to rST, so that qemu-doc.texi covers only full system emulation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200228153619.9906-2-peter.maydell@linaro.org Message-id: 20200226113034.6741-2-pbonzini@redhat.com [PMM: Fix makefile conflicts; add user manual to index.rst and index.html.in; don't specify empty man_pages list; fixed a few comments to say 'user' rather than 'system'] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-25docs: Move tools documentation to tools manualPeter Maydell
Move the following tools documentation files to the new tools manual: docs/interop/qemu-img.rst docs/interop/qemu-nbd.rst docs/interop/virtfs-proxy-helper.rst docs/interop/qemu-trace-stap.rst docs/interop/virtiofsd.rst Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20200217155415.30949-4-peter.maydell@linaro.org
2020-02-25docs: Move qemu-option-trace.rst.inc to docs/Peter Maydell
The qemu-option-trace.rst.inc file contains a rST documentation fragment which describes trace options common to qemu-nbd and qemu-img. We put this file into interop/, but we'd like to move the qemu-nbd and qemu-img files into the tools/ manual. We could move the .rst.inc file along with them, but we're eventually going to want to use it for the main QEMU binary options documentation too, and that will be in system/. So move qemu-option-trace.rst.inc to the top-level docs/ directory, where all these files can include it via .. include:: ../qemu-option-trace.rst.inc This does have the slight downside that we now need to explicitly tell Make which manuals use this file rather than relying on a wildcard for all .rst.inc in the manual. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20200217155415.30949-3-peter.maydell@linaro.org
2020-02-25docs: Create new 'tools' manualPeter Maydell
Some of the documentation for QEMU "tools" which are standalone binaries like qemu-img is an awkward fit in our current 5-manual split. We've put it into "interop", but they're not really about interoperability. Create a new top level manual "tools" which will be a better home for this documentation. This commit creates an empty initial manual; we will move the relevant documentation files in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20200217155415.30949-2-peter.maydell@linaro.org
2020-02-24Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request This pull request contains a virtio-blk/scsi performance optimization, event loop scalability improvements, and a qtest-based device fuzzing framework. I am including the fuzzing patches because I have reviewed them and Thomas Huth is currently away on leave. # gpg: Signature made Sat 22 Feb 2020 08:50:05 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: (31 commits) fuzz: add documentation to docs/devel/ fuzz: add virtio-scsi fuzz target fuzz: add virtio-net fuzz target fuzz: add i440fx fuzz targets fuzz: add configure flag --enable-fuzzing fuzz: add target/fuzz makefile rules fuzz: add support for qos-assisted fuzz targets fuzz: support for fork-based fuzzing. main: keep rcu_atfork callback enabled for qtest exec: keep ram block across fork when using qtest fuzz: add fuzzer skeleton libqos: move useful qos-test funcs to qos_external libqos: split qos-test and libqos makefile vars libqos: rename i2c_send and i2c_recv qtest: add in-process incoming command handler libqtest: make bufwrite rely on the TransportOps libqtest: add a layer of abstraction to send/recv qtest: add qtest_server_send abstraction fuzz: add FUZZ_TARGET module type module: check module wasn't already initialized ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-22fuzz: add target/fuzz makefile rulesAlexander Bulekov
Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200220041118.23264-18-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-21docs: Fix virtiofsd.1 locationMiroslav Rezanina
Patch 6a7e2bbee5 docs: add virtiofsd(1) man page introduced new man page virtiofsd.1. Unfortunately, wrong file location is used as source for install command. This cause installation of docs fail. Fixing wrong location so installation is successful. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Message-Id: <1608747495.7195569.1581513386780.JavaMail.zimbra@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-15Makefile: Fix typo in dependency list for interop manpagesPeter Maydell
Fix a typo in the dependency list for the manpages built from the 'interop' manual, which meant we were accidentally not including the .hx file in the dependency list. Fixes: e13c59fa4414215500e6 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200213175647.17628-4-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-14configure: Allow user to specify sphinx-build binaryPeter Maydell
Currently we insist on using 'sphinx-build' from the $PATH; allow the user to specify the binary to use. This will be more useful as we become pickier about the capabilities we require (eg needing a Python 3 sphinx-build). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20200213175647.17628-2-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-10docs: add virtiofsd(1) man pageStefan Hajnoczi
Document the virtiofsd(1) program and its command-line options. This man page is a rST conversion of the original texi documentation that I wrote. Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-04Makefile: Do not use wildcard hw/*/Kconfig as input for minikconfThomas Huth
The hw/*/Kconfig files should be sourced from hw/Kconfig, so there is no need to pass them along as input files to minikconfig. We should use the hw/*/Kconfig wildcard only for build dependencies in the Makefile. With this change, there are now no duplicate entries in the generated *-softmmu/config-devices.mak.d files anymore, and there is finally a chance to get rid of stale Kconfig files like hw/bt/Kconfig, too (once they do not show up in the config-devices.mak.d files now anymore). Message-Id: <20200203153905.20544-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-03virtfs-proxy-helper: Convert documentation to rSTPeter Maydell
The virtfs-proxy-helper documentation is currently in fsdev/qemu-trace-stap.texi in Texinfo format, which we present to the user as: * a virtfs-proxy-helper manpage * but not (unusually for QEMU) part of the HTML docs Convert the documentation to rST format that lives in the docs/ subdirectory, and present it to the user as: * a virtfs-proxy-helper manpage * part of the interop/ Sphinx manual There are minor formatting changes to suit Sphinx, but no content changes. In particular I've split the -u and -g options into each having their own description text. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Greg Kurz <groug@kaod.org> Message-id: 20200124162606.8787-9-peter.maydell@linaro.org
2020-02-03scripts/qemu-trace-stap: Convert documentation to rSTPeter Maydell
The qemu-trace-stap documentation is currently in scripts/qemu-trace-stap.texi in Texinfo format, which we present to the user as: * a qemu-trace-stap manpage * but not (unusually for QEMU) part of the HTML docs Convert the documentation to rST format that lives in the docs/ subdirectory, and present it to the user as: * a qemu-trace-stap manpage * part of the interop/ Sphinx manual There are minor formatting changes to suit Sphinx, but no content changes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200124162606.8787-8-peter.maydell@linaro.org
2020-02-03qemu-img: Convert invocation documentation to rSTPeter Maydell
The qemu-img documentation is currently in qemu-nbd.texi in Texinfo format, which we present to the user as: * a qemu-img manpage * a section of the main qemu-doc HTML documentation Convert the documentation to rST format, and present it to the user as: * a qemu-img manpage * part of the interop/ Sphinx manual The qemu-img rST document uses the new hxtool extension to handle pulling rST fragments out of qemu-img-cmds.hx. The documentation of the various options and commands is rather muddled, with some options being described inside the relevant command description and some in a more general section near the start of the manual. All the command synopses are replicated in the .hx file and then again in the manual. A lot of text is also duplicated in the qemu-img.c code for the help text. I have not attempted to deal with any of this, but have simply transposed the existing structure into rST. As usual, there are some minor formatting changes but no textual changes, except that as with one or two other conversions I have dropped the 'see also' section since it's not very informative and looks odd in the HTML. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200124162606.8787-6-peter.maydell@linaro.org
2020-02-03Makefile: Ensure we don't run Sphinx in parallel for manpagesPeter Maydell
Sphinx will corrupt its doctree cache if we run two copies of it in parallel. In commit 6bda415c10d966c8d3 we worked around this by having separate doctrees for 'html' vs 'manpage' runs. However now that we have more than one manpage produced from a single manual we can run into this again when trying to produce the two manpages. Use the trick described in 'Atomic Rules in GNU Make' https://www.cmcrossroads.com/article/atomic-rules-gnu-make to ensure that we only run the Sphinx manpage builder once for each manual, even if we're producing several manpages. This fixes doctree corruption in parallel builds and also avoids pointlessly running Sphinx more often than we need to. (In GNU Make 4.3 there is builtin support for this, via the "&:" syntax, but we can't wait for that to be available in all the distros we support...) The generic "one invocation for multiple output files" machinery is provided as a macro named 'atomic' in rules.mak; we then wrap this in a more specific macro for defining the rule and dependencies for the manpages in a Sphinx manual, to avoid excessive repetition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200124162606.8787-2-peter.maydell@linaro.org
2020-02-02hw/ppc/prep: Remove the deprecated "prep" machine and the OpenHackware BIOSThomas Huth
It's been deprecated since QEMU v3.1. The 40p machine should be used nowadays instead. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200114114617.28854-1-thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Register qdev properties as class properties (Marc-André) * Cleanups (Philippe) * virtio-scsi fix (Pan Nengyuan) * Tweak Skylake-v3 model id (Kashyap) * x86 UCODE_REV support and nested live migration fix (myself) * Advisory mode for pvpanic (Zhenwei) # gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) build-sys: clean up flags included in the linker command line target/i386: Add the 'model-id' for Skylake -v3 CPU models qdev: use object_property_help() qapi/qmp: add ObjectPropertyInfo.default-value qom: introduce object_property_help() qom: simplify qmp_device_list_properties() vl: print default value in object help qdev: register properties as class properties qdev: move instance properties to class properties qdev: rename DeviceClass.props qdev: set properties with device_class_set_props() object: return self in object_ref() object: release all props object: add object_class_property_add_link() object: express const link with link property object: add direct link flag object: rename link "child" to "target" object: check strong flag with & object: do not free class properties object: add object_property_set_default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-24build-sys: clean up flags included in the linker command linePaolo Bonzini
Some of the CFLAGS that are discovered during configure, for example compiler warnings, are being included on the linker command line because QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice because they are included in both QEMU_CFLAGS and LDFLAGS. All this leads to confusion with respect to what goes in which Makefile variables (and we have plenty). So, introduce QEMU_LDFLAGS for flags discovered by configure, following the lead of QEMU_CFLAGS, and stop adding to it: 1) options that are already in CFLAGS, for example "-g" 2) duplicate options At the same time, options that _are_ needed by both compiler and linker must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer. This is mostly -fsanitize options. For now, --extra-cflags has this behavior (but --extra-cxxflags does not). Meson will not include CFLAGS on the linker command line, do the same in our build system as well. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b' into staging virtiofsd first pull v2 Import our virtiofsd. This pulls in the daemon to drive a file system connected to the existing qemu virtiofsd device. It's derived from upstream libfuse with lots of changes (and a lot trimmed out). The daemon lives in the newly created qemu/tools/virtiofsd Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> v2 drop the docs while we discuss where they should live and we need to redo the manpage in anything but texi # gpg: Signature made Thu 23 Jan 2020 16:45:18 GMT # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b: (108 commits) virtiofsd: add some options to the help message virtiofsd: stop all queue threads on exit in virtio_loop() virtiofsd/passthrough_ll: Pass errno to fuse_reply_err() virtiofsd: Convert lo_destroy to take the lo->mutex lock itself virtiofsd: add --thread-pool-size=NUM option virtiofsd: fix lo_destroy() resource leaks virtiofsd: prevent FUSE_INIT/FUSE_DESTROY races virtiofsd: process requests in a thread pool virtiofsd: use fuse_buf_writev to replace fuse_buf_write for better performance virtiofsd: add definition of fuse_buf_writev() virtiofsd: passthrough_ll: Use cache_readdir for directory open virtiofsd: Fix data corruption with O_APPEND write in writeback mode virtiofsd: Reset O_DIRECT flag during file open virtiofsd: convert more fprintf and perror to use fuse log infra virtiofsd: do not always set FUSE_FLOCK_LOCKS virtiofsd: introduce inode refcount to prevent use-after-free virtiofsd: passthrough_ll: fix refcounting on remove/rename libvhost-user: Fix some memtable remap cases virtiofsd: rename inode->refcount to inode->nlookup virtiofsd: prevent races with lo_dirp_put() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-23virtiofsd: cap-ng helpersDr. David Alan Gilbert
libcap-ng reads /proc during capng_get_caps_process, and virtiofsd's sandboxing doesn't have /proc mounted; thus we have to do the caps read before we sandbox it and save/restore the state. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-23virtiofsd: add seccomp whitelistStefan Hajnoczi
Only allow system calls that are needed by virtiofsd. All other system calls cause SIGSYS to be directed at the thread and the process will coredump. Restricting system calls reduces the kernel attack surface and limits what the process can do when compromised. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> with additional entries by: Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com> Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Signed-off-by: piaojun <piaojun@huawei.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Eric Ren <renzhen@linux.alibaba.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-23virtiofsd: add vhost-user.json fileStefan Hajnoczi
Install a vhost-user.json file describing virtiofsd. This allows libvirt and other management tools to enumerate vhost-user backend programs. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-23virtiofsd: Add Makefile wiring for virtiofsd contribDr. David Alan Gilbert
Wire up the building of the virtiofsd in tools. virtiofsd relies on Linux-specific system calls and seccomp. Anyone wishing to port it to other host operating systems should do so carefully and without reducing security. Only allow building on Linux hosts. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 13:42:36 +0000