aboutsummaryrefslogtreecommitdiff
path: root/Makefile.target
AgeCommit message (Collapse)Author
2016-09-19build-sys: remove qmp-commands-old.hMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20160912091913.15831-17-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-06s390x/cpumodel: generate CPU feature lists for CPU modelsMichael Mueller
This patch introduces the helper "gen-features" which allows to generate feature list definitions at compile time. Its flexibility is better and the error-proneness is lower when compared to static programming time added statements. The helper includes "target-s390x/cpu_features.h" to be able to use named facility bits instead of numbers. The generated defines will be used for the definition of CPU models. We generate feature lists for each HW generation and GA for EC models. BC models are always based on a EC version and have no separate definitions. Base features: Features we expect to be always available in sane setups. Migration safe - will never change. Can be seen as "minimum features required for a CPU model". Default features: Features we expect to be stable and around in latest setups (e.g. having KVM support) - not migration safe. Max features: All supported features that are theoretically allowed for a CPU model. Exceeding these features could otherwise produce problems with IBC (instruction blocking controls) in KVM. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> [generate base, default and models. renaming and cleanup] Message-Id: <20160905085244.99980-6-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-26linux-user: Create a hostdep.h for each host architecturePeter Maydell
In commit 4d330cee37a21 a new hostdep.h file was added, with the intent that host architectures which needed one could provide it, and the build system would automatically fall back to a generic version if there was no version for the host architecture. Although this works, it has a flaw: if a subsequent commit switches an architecture from "uses generic/hostdep.h" to "uses its own hostdep.h" nothing in the makefile dependencies notices this and so doing a rebuild without a manual 'make clean' will fail. So we drop the idea of having a 'generic' version in favour of every architecture we support having its own hostdep.h, even if it doesn't have anything in it. (There are only thirteen of these.) If the dependency files claim that an object file depends on a nonexistent file, our dependency system means that make will rebuild the object file, and regenerate the dependencies in the process. So moving between trees prior to this commit and trees after this commit works without requiring a 'make clean'. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-20trace: add build framework for merging trace-events filesDaniel P. Berrange
Switch make rules over to use trace-events-all as the master trace events input file. Add rule that will construct trace-events-all from $(trace-events-y). Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-07Makefile: add dependency on scripts/hxtoolPaolo Bonzini
Make sure that the various documentation and C code files are rebuilt whenever there is a change in the script that splits them out of .hx files. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-27linux-user: Provide safe_syscall for fixing races between signals and syscallsTimothy E Baldwin
If a signal is delivered immediately before a blocking system call the handler will only be called after the system call returns, which may be a long time later or never. This is fixed by using a function (safe_syscall) that checks if a guest signal is pending prior to making a system call, and if so does not call the system call and returns -TARGET_ERESTARTSYS. If a signal is received between the check and the system call host_signal_handler() rewinds execution to before the check. This rewinding has the effect of closing the race window so that safe_syscall will reliably either (a) go into the host syscall with no unprocessed guest signals pending or or (b) return -TARGET_ERESTARTSYS so that the caller can deal with the signals. Implementing this requires a per-host-architecture assembly language fragment. This will also resolve the mishandling of the SA_RESTART flag where we would restart a host system call and not call the guest signal handler until the syscall finally completed -- syscall restarting now always happens at the guest syscall level so the guest signal handler will run. (The host syscall will never be restarted because if the host kernel rewinds the PC to point at the syscall insn for a restart then our host_signal_handler() will see this and arrange the guest PC rewind.) This commit contains the infrastructure for implementing safe_syscall and the assembly language fragment for x86-64, but does not change any syscalls to use it. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: * Avoid having an architecture if-ladder in configure by putting linux-user/host/$(ARCH) on the include path and including safe-syscall.inc.S from it * Avoid ifdef ladder in signal.c by creating new hostdep.h to hold host-architecture-specific things * Added copyright/license header to safe-syscall.inc.S * Rewrote commit message * Added comments to safe-syscall.inc.S * Changed calling convention of safe_syscall() to match syscall() (returns -1 and host error in errno on failure) * Added a long comment in qemu.h about how to use safe_syscall() to implement guest syscalls. ] RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts" patch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-18io: add abstract QIOChannel classesDaniel P. Berrange
Start the new generic I/O channel framework by defining a QIOChannel abstract base class. This is designed to feel similar to GLib's GIOChannel, but with the addition of support for using iovecs, qemu error reporting, file descriptor passing, coroutine integration and use of the QOM framework for easier sub-classing. The intention is that anywhere in QEMU that almost anywhere that deals with sockets will use this new I/O infrastructure, so that it becomes trivial to then layer in support for TLS encryption. This will at least include the VNC server, char device backend and migration code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header update and cleanup * Support for HyperV crash report * Cleanup of target-specific HMP commands * Multiarch batch * Checkpatch fix for Perl 5.22 * NBD fix * Revert incorrect commit 5243722376 # gpg: Signature made Wed 16 Sep 2015 16:39:01 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (24 commits) nbd: release exp->blk after all clients are closed checkpatch: Escape left braces in regex monitor: uninclude cpu_ldst include/exec: Move cputlb exec.c defs out cputlb: Change tlb_set_dirty() arg to cpu cputlb: move CPU_LOOP() for tlb_reset() to exec.c translate: move real_host_page setting to -common tcg: Move tci_tb_ptr to -common tcg: split tcg_op_defs to -common translate-all: Move tcg_handle_interrupt() to -common cpu-exec: Migrate some generic fns to cpu-exec-common qemu-char: Use g_new() & friends where that makes obvious sense monitor: added generation of documentation for hmp-commands-info.hx hmp-commands.hx: fix end of table info monitor: remove target-specific code from monitor.c hmp-commands-info: move info_cmds content out of monitor.c i386/kvm: Hyper-v crash msrs set/get'ers and migration kvm: Add kvm system event crash handler cpu: Add crash_occurred flag into CPUState target-i386: move asm-x86/hyperv.h to standard-headers ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-16tcg: split tcg_op_defs to -commonPeter Crosthwaite
tcg_op_defs (and the _max) are both needed by the TCI disassembler. For multi-arch, tcg.c will be multiple-compiled (arch-obj) with its symbols hidden from common code. So split the definition off to new file, tcg-common.c which will remain a regular obj-y for use by both the TCI disas as well as the multiple tcg.c's. Cc: Stefan Weil <sw@weilnetz.de> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <4b607425886d85aee65878e4935dfad46b3e6085.1441614289.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16translate-all: Move tcg_handle_interrupt() to -commonPeter Crosthwaite
Move this function to common code. It has no arch specific dependencies. Prepares support for multi-arch where the translate-all interface needs to be virtualised. One less thing to virtualise. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <44a7c73604ed2552af47ed02b047b6a772b683e0.1441614289.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16cpu-exec: Migrate some generic fns to cpu-exec-commonPeter Crosthwaite
The goal is to split the functions such that cpu-exec is CPU specific content, while cpus-exec-common.c is generic code only. The function interface to cpu-exec needs to be virtualised to prepare support for multi-arch and moving these definitions out saves bloating the QOM interface. So move these definitions out of cpu-exec to a new module, cpu-exec-common. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <3cefeb3fbbb33031670951a0e74de2778529da3f.1441614289.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16hmp-commands-info: move info_cmds content out of monitor.cPavel Butsykin
For moving target- and device-specific code from monitor.c, to beginning we move info_cmds content to hmp-commands-info.hx Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-2-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15qom: allow QOM to be linked into tools binariesDaniel P. Berrange
The qom objects are currently added to common-obj-y which is only linked into the system emulators. The later crypto patches will depend on QOM infrastructure and will also be used from tools binaries. Thus the QOM objects are moved into a new qom-obj-y variable which can be referenced when linking tools, system emulators and tests. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15crypto: move crypto objects out of libqemuutil.laDaniel P. Berrange
Future patches will be adding more crypto related APIs which rely on QOM infrastructure. This creates a problem, because QOM relies on library constructors to register objects. When you have a file in a static .a library though which is only referenced by a constructor the linker is dumb and will drop that file when linking to the final executable :-( The only workaround for this is to link the .a library to the executable using the -Wl,--whole-archive flag, but this creates its own set of problems because QEMU is relying on lazy linking for libqemuutil.a. Using --whole-archive majorly increases the size of final executables as they now contain a bunch of object code they don't actually use. The least bad option is to thus not include the crypto objects in libqemuutil.la, and instead define a crypto-obj-y variable that is referenced directly by all the executables that need this code (tools + softmmu, but not qemu-ga). We avoid pulling entire of crypto-obj-y into the userspace emulators as that would force them to link to gnutls too, which is not required. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-09Makefile.target: include top level build dir in vpathMichael Marineau
Using ccache with CCACHE_BASEDIR set to $(SRC_PATH) or a parent will rewrite all absolute paths to relative paths. This interacts poorly with QEMU's two-level build directory scheme. For example, lets say BUILD_DIR=$(SRC_PATH)/build so build/blockdev.d will contain: blockdev.o: ../blockdev.c ../include/sysemu/block-backend.h \ Now the target build under build/x86_64-softmmu or similar will depend on ../blockdev.o which in turn will get make to source ../blockdev.d to check its dependencies. Since make always considers paths relative to the current working directory rather than the makefile the path appeared in the relative path to ../blockdev.c is useless. This change simply adds the top level build directory to vpath so paths relative to the source directory, top build directory, and target build directory all work just fine. Signed-off-by: Michael Marineau <michael.marineau@coreos.com> Message-Id: <1439103775-11836-1-git-send-email-michael.marineau@coreos.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-12migration: move savevm.c inside migration/Juan Quintela
Now, everything is in place. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-12migration: move ram stuff to migration/ramJuan Quintela
For historic reasons, ram migration have been on arch_init.c. Just split it into migration/ram.c, the same that happened with block.c. There is only code movement, no changes altogether. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-05Makefile.target: set master BUILD_DIRPeter Crosthwaite
make can be invoked in the individual build dirs to build an individual target or just a single file of a target. e.g. touch translate-all.c make -C microblazeel-softmmu translate-all.o There is however a small bug when using the pixman submodule. config-host.mak will ref BUILD_DIR for the pixman -I CFLAGS: grep BUILD_DIR config-host.mak QEMU_CFLAGS=-I$(SRC_PATH)/pixman/pixman -I$(BUILD_DIR)/pixman/pixman ... This causes a build failure as -I/pixman/pixman (BUILD_DIR=="") will not be found. BUILD_DIR is usually set by the top level Makefile. Just lazy-set it in Makefile.target to the parent directory. Granted, this will not work if the pixman submodule is not prebuilt, but it at least means you can do incremental partial builds once you have done your initial full build (or attempt) from the top level. The next step would be refactor make infrastructure to rebuild pixman on a submake like the one above. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <1432618686-16077-1-git-send-email-crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-03device-tree: Make a common-objPeter Crosthwaite
There is no reason for device tree API to be built per-target. common-obj it. There is an extraneous inclusion of config.h that needs to be removed. Cc: Alexander Graf <agraf@suse.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-05-19Makefile.target: set icon for binary file on Mac OS XProgrammingkid
Implements setting the icon for the binary file in Mac OS X. Signed-off-by: John Arbuckle <programmingkidx@gmail.com> [PMM: tweaked makefile to use $@ and quiet-command] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-28Makefile.target: prepend $libs_softmmu to $LIBSWei Liu
I discovered a problem when trying to build QEMU statically with gcc. libm is an element of LIBS while libpixman-1 is an element in libs_softmmu. Libpixman references functions in libm, so the original ordering makes linking fail. This fix is to reorder $libs_softmmu and $LIBS to make -lm appear after -lpixman-1. However I'm not quite sure if this is the right fix, hence the RFC tag. Normally QEMU is built with c++ compiler which happens to link in libm (at least this is the case with g++), so building QEMU statically normally just works and nobody notices this issue. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Message-Id: <1425912873-21215-1-git-send-email-wei.liu2@citrix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-27Makefile.target: binary depends on config-devicesMichael S. Tsirkin
relink binary whenever config-devices.mak changes: this makes sense as we are adding/removing devices, so binary has to be relinked to be up to date. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1424332114-13440-2-git-send-email-mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-12tcg: Move some opcode generation functions out of lineRichard Henderson
Some of these functions are really quite large. We have a number of things that ought to be circularly dependent, but we duplicated code to break that chain for the inlines. This saved 25% of the code size of one of the translators I examined. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-10-15bootdevice: move bootdevice related code to new file bootdevice.cGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-12trace: [tcg] Define TCG tracing helper routinesLluís Vilanova
Generates file "trace/generated-helpers.c" with TCG helper definitions to trace events in guest code at execution time. The helpers ('helper_trace_${event}_exec_proxy') cast the TCG-compatible native argument types to their original types (as defined in "trace-events") and call the tracing routine ('trace_${event}_exec'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12trace: install simpletrace SystemTap tapsetStefan Hajnoczi
The simpletrace SystemTap tapset outputs simpletrace binary traces for SystemTap probes. This is useful because SystemTap has no default way to format or store traces. The simpletrace SystemTap tapset provides an easy way to store traces. The simpletrace.py tool or custom Python scripts using the simpletrace.py API can analyze SystemTap these traces: $ ./configure --enable-trace-backends=dtrace ... $ make && make install $ stap -e 'probe qemu.system.x86_64.simpletrace.* {}' \ -c qemu-system-x86_64 >/tmp/trace.out $ scripts/simpletrace.py --no-header trace-events /tmp/trace.out g_malloc 4.531 pid=15519 size=0xb ptr=0x7f8639c10470 g_malloc 3.264 pid=15519 size=0x300 ptr=0x7f8639c10490 g_free 5.155 pid=15519 ptr=0x7f8639c0f7b0 Note that, unlike qemu-system-x86_64.stp and qemu-system-x86_64.stp-installed, only one file is needed since the simpletrace SystemTap tapset does not reference the QEMU binary by path. Therefore it doesn't matter whether the QEMU binary is installed or not. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01configure: Fix -lm test, so that tools can be compiled on hosts that require -lmAlexey Kardashevskiy
The existing test whether "-lm" needs to be included or not is insufficient as it reports false negative on Fedora20/ppc64. This happens because sin(0.0) is a constant value which compiler can safely throw away and therefore there is no need to add "-lm". As the result, qemu-nbd/qemu-io/qemu-img tools cannot compile. This adds a global variable and uses it in the test to prevent from optimization. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [Use Peter's improvement on the test to fool LTO, and remove the now useless -lm addition in Makefile.target. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-24build-sys: introduce install-prog macro to install&strip binaries and use itMichael Tokarev
Use common rule (macro) to install and strip binaries, and use it in all places where we install binaries, instead of fixing bugs like 1319493 in every place. (This fixes https://bugs.launchpad.net/bugs/1319493) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-19NUMA: move numa related code to new file numa.cWanlong Gao
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> MST: comment tweaks
2014-06-16target-ppc: Enable Building of libdecnumberTom Musta
Enable compilation of the newly added libdecnumber library code. Object file targets are added to Makefile.target using a newly introduced flag CONFIG_LIBDECNUMBER. The flag is added to the PowerPC targets (ppc[64]-linux-user, ppc[64]-softmmu). Signed-off-by: Tom Musta <tommusta@gmail.com> [agraf: add ppcemb and ppc64abi32 config] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-11bsd-user: add HOST_VARIANT_DIR for various *BSD dependent codeStacey Son
This change adds HOST_VARIANT_DIR so the various BSD OS dependent code can be separated into its own directories rather than using #ifdef's. This may also allow an BSD variant OS to host another BSD variant's executable as a target. Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1402246651-71099-2-git-send-email-sbruno@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-09trace: Multi-backend tracingLluís Vilanova
Adds support to compile QEMU with multiple tracing backends at the same time. For example, you can compile QEMU with: $ ./configure --enable-trace-backends=ftrace,dtrace Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system. This patch allows having both available without recompiling QEMU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-08Makefile.target: use $(INSTALL_PROG) for installing, not $(INSTALL)Michael Tokarev
$(INSTALL_PROG) is evaluated to libtool if using libtool, while $(INSTALL) is not. Use $(INSTALL_PROG) so that libtool is used with target too when necessary. This allows, for example, to link qemu with shared libcacard. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Fam Zheng <famz@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alon Levy <alevy@redhat.com> Cc: qemu-trivial@nongnu.org -- This is done on top of previous patch (using $(STRIP)), but it can be used by its own. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08Makefile: strip tools and modules tooMichael Tokarev
Commit 52ba784d3 replaced $(STRIP_OPT) with $(STRIP) in some places (for example, Makefile.target), but not all of them. There are a few places remain in main Makefile which still uses $(STRIP_OPT). Replace these places with $(STRIP) too. While at it, simplify variable pattern substitution of the surrounding places, change $(patsubst pat,rep,$(var)) into $(var:pat=rep) which is much easier to read (this is probably a good idea to do everywhere). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Fam Zheng <famz@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08build: simplify Makefile.target around unnest-vars invocationsPaolo Bonzini
No need to save/restore obj-y, we can just build all-obj-y incrementally. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08build: simplify Makefile.target a bit, use just one rule for softmmuMichael Tokarev
On win*, we build QEMU_PROGW (GUI) and create a console app QEMU_PROG from it, while on non-win*, we make only QEMU_PROG using the same rules as used for QEMU_PROGW on win*. Make just one rule for building main executable, and an additional rule for win* to make console app from it. Also consolidate tests for $(QEMU_PROGW). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> [Fix user-mode compilation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-07xen: factor out common functionsWei Liu
So common functions used by both HVM and PV are factored out from xen-all.c to xen-common.c. Finally rename xen-all.c to xen-hvm.c, as those functions are only useful to HVM guest. Create *-stub files and modify Makefile.target to reflect the changes. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-02-20build: softmmu targets do not have a "main.o" filePaolo Bonzini
Thus this rule is useless. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20Makefile: introduce common-obj-m and block-obj-m for DSOFam Zheng
$(common-obj-m) will include $(block-obj-m), like $(common-obj-y) does for $(block-obj-y). Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20rules.mak: fix $(obj) to a real relative pathFam Zheng
Makefile.target includes rule.mak and unnested common-obj-y, then prefix them with '../', this will ignore object specific QEMU_CFLAGS in subdir Makefile.objs: $(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS) Because $(obj) here is './block', instead of '../block'. This doesn't hurt compiling because we basically build all .o from top Makefile, before entering Makefile.target, but it will affact arriving per-object libs support. The starting point of $(obj) is passed in as argument of unnest-vars, as well as nested variables, so that different Makefiles can pass in a right value. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-16default-configs/: CONFIG_GDBSTUB_XML removedÁkos Kovács
Makefile.target: Build gdbstub-xml.o only when TARGET_XML_FILES is not empty. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-16Makefile.target: CONFIG_NO_* variables removedÁkos Kovács
CONFIG_NO_* variables replaced with the lnot logical function Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> [PMM: fixed a few CONFIG_NO_* uses that were missed] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-14build: do not use TARGET_ARCHPaolo Bonzini
TARGET_ARCH is generally wrong to use, there are better variables provided in config-target.mak. The right one is usually TARGET_NAME (previously TARGET_ARCH2), but for bsd-user we can also use TARGET_ABI_DIR for consistency with linux-user. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1370349928-20419-4-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-14build: rename TARGET_ARCH2 to TARGET_NAMEPaolo Bonzini
Do not introduce any new use yet. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1370349928-20419-3-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-14Add a stp file for usage from build directoryAlon Levy
For systemtap the location of the process being tapped is crucial, as a result the existing stp file requires installation for use. There are now two files: $(TARGET_DIR)/$(QEMU_PROG).stp-installed: copied to $(tapdir)/$(QEMU_PROG).stp $(TARGET_DIR)/$(QEMU_PROG).stp: pointing to the built binary, usable without installation To use: stap -I $(TARGET_DIR) ... Signed-off-by: Alon Levy <alevy@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1370349928-20419-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-11dump: Drop qmp_dump_guest_memory() stub and build for all targetsAndreas Färber
qmp_dump_guest_memory() calls dump_init() and returns an Error when cpu_get_dump_info() returns an error, as done by the stub. So there is no need to have a stub for qmp_dump_guest_memory(). Enable the documentation of the always-present dump-guest-memory command. That way we can drop CONFIG_HAVE_CORE_DUMP and leave configure completely out of the picture for target CPU features. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-11memory_mapping: Drop qemu_get_memory_mapping() stubAndreas Färber
dump.c:dump_init() never checked for the return code anyway. If paging is not enabled, it will fall back to an identity map. If paging is enabled and getting memory mapping list is not implemented, qemu_get_guest_memory_mapping() will return an error. Since the targets not implementing memory mapping also don't implement dump support, we will not reach this code today and can worry about changing cpu_paging_enabled() default when the need arises. This allows us to drop CONFIG_HAVE_GET_MEMORY_SUPPORT. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-10dump: Move stubs into libqemustub.aAndreas Färber
This allows us to drop CONFIG_NO_CORE_DUMP with its indirect dependency on CONFIG_HAVE_CORE_DUMP. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01cpu: Make kvm-stub.o available outside softmmuIgor Mammedov
It will provide stubs for *-user targets once softmmu-specific calls are attempted from common CPU code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-27win32: generate console executable againPaolo Bonzini
The -mwindows option is not anymore in LIBS at this point of the Makefile, it is only in libs_softmmu. Check the right variable. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 16:40:01 +0000