aboutsummaryrefslogtreecommitdiff
path: root/Makefile.target
AgeCommit message (Collapse)Author
2013-04-24build: include config-{, all-}devices.mak after defining CONFIG_SOFTMMU and ↵Paolo Bonzini
CONFIG_USER_ONLY Moving the inclusions closer to Makefile, and before rules.mak, makes Makefile and Makefile.target more consistent with each other. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Markus Armbruster <armbru@redhat.com> Message-id: 1366102238-12374-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-18configure: move common libraries to config-host.makPaolo Bonzini
Move -lm to the end of the line, so that it can be picked up as a dependency by pixman in the static build case. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-03-01build: always link device_tree.o into emulators if libfdt availablePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-18qtest: Add MMIO supportAndreas Färber
Introduce [qtest_]{read,write}[bwlq]() libqtest functions and corresponding QTest protocol commands to replace local versions in libi2c-omap.c. Also convert m48t59-test's cmos_{read,write}_mmio() to {read,write}b(). Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1361051043-27944-4-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-26build: remove universal-obj-yPaolo Bonzini
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how we define symbols for hardware components. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-12build: improve quiet output for .stp rulesPaolo Bonzini
Mention the directory in which the .stp file is being generated. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: consolidate multiple variables into universal-obj-yPaolo Bonzini
The directory descent mechanism, and a less-flat tree both helped in making some *-obj-y definitions very short. Many of these often end up in universal-obj-y, and used to be separate only because of libuser (which is now part of history...). Consolidate these variables in a single one. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: move util-obj-y to libqemuutil.aPaolo Bonzini
Use a static library to eliminate repetition in the linking rules. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: rename oslib-obj-y to util-obj-yPaolo Bonzini
This prepares the creation of libqemuutil.a in the next patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-02tci: Fix broken builds with TCG interpreterStefan Weil
TCI no longer compiled after commit 76cad71136b7eb371cf2a2a4e1621cfe8d9c769a. The TCI disassembler depends on data structures which are different for each QEMU target, so it cannot be compiled as a universal-obj today. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-22build: fix includes for VNCPaolo Bonzini
vnc-tls.h is included by vnc.h, and it includes gnutls/gnutls.h. Hence, GnuTLS header files are needed by all files that include vnc.h, most notably qmp.c. Move these flags to QEMU_CFLAGS for simplicity. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19build: kill libuserPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-28build: compile translate.o with -fno-gcse option on GCC 4.6.x and 4.7.[012]Paolo Bonzini
These versions of GCC require insane (>2GB) amounts of memory to compile translate.o. As a countermeasure, disable the culprit optimization pass. This should fix the buildbot failure for default_x86_64_fedora16. Anyway this is a good thing to do because people will try to compile 1.3 with less than 2GB of memory and complain. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-18build: replace weak symbols with a static libraryPaolo Bonzini
Weak symbols were a nice idea, but they turned out not to be a good one. Toolchain support is just too sparse, in particular llvm-gcc is totally broken. This patch uses a surprisingly low-tech approach: a static library. Symbols in a static library are always overridden by symbols in an object file. Furthermore, if you place each function in a separate source file, object files for unused functions will not be taken in. This means that each function can use all the dependencies that it needs (especially QAPI stuff such as error_setg). Thus, all stubs are placed in separate object files and put together in a static library. The library then is linked to all programs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-05Remove libhwStefan Weil
The entries for libhw* are no longer needed in .gitignore. There is also no longer a difference between common-obj-y and hw-obj-y, so one of those two macros is sufficient. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-04Make target_phys_addr_t 64 bits unconditionallyAvi Kivity
The hassle and compile time overhead of maintaining both 32-bit and 64-bit capable source isn't worth the tiny performance advantage which is seen on a minority of configurations. Switch to compiling libhw only once, with target_phys_addr_t unconditionally typedefed to uint64_t. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-07-28build: get dependency file directories from object file namesPaolo Bonzini
After commit dcff25f2cd8c11a9368cc2369aeb0319c32d9e26, Dependency file are taken from the directories that have a Makefile.objs file. This is not enough, since files can be included from other directories. So, pick them from directories that have an object file in them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-28bsd-user: fix buildBlue Swirl
Link in oslib objects also for BSD user, but avoid using the version of qemu_vmalloc() defined in oslib-posix.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-27Makefile.target: Update clean command to clean hw/ directoryPeter Maydell
Now we create object files in a hierarchy under hw/, so the 'clean' target must also be updated to delete those object files. Rather than using a manual list of subdirectories which will easily drift out of date, we just delete all .o and .d files in the target directory hierarchy. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-24make: Fix dependencies for fpu/*.c and tcg/*.cStefan Weil
Commit dcff25f2cd8c11a9368cc2369aeb0319c32d9e26 removed too many *.d files. The directories fpu/ and tcg/ still don't use the recursive subdir rules. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-19make: automatically include dependencies in recursive subdir rules (v2)Anthony Liguori
I think I understand enough of what's going on in these rules to ensure this is right. But I could certainly use a second or third opinion... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-10Revert "build: compile oslib-obj-y once"Blue Swirl
This reverts commit 25f27a4f7160d077d6992e811021b4bc3a82abc1 because of bsd-user breakage. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-07build: compile oslib-obj-y oncePaolo Bonzini
There is no difference in oslib-obj-y between user-mode and system targets. There used to be when user-mode could optionally be compiled with PIE. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: limit usage of vpathPaolo Bonzini
All paths are now explicitly given, and the object tree mimics the source tree, so there is no need to apply special vpaths. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: libcacard Makefile cleanupsPaolo Bonzini
Build vscclient from toplevel Makefile, limit usage of vpath. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move device tree to per-target Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move per-target hw/ objects to nested Makefile.objsPaolo Bonzini
This completes the move to nested Makefiles for virtio and a few other files that were not part of obj-TARGET-y, but still were compiled separately for each target. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move rules for nesting to Makefile.objsPaolo Bonzini
At this point we will start adding nesting behavior to other files than Makefile.target. Because Makefile.objs is included by Makefile.target, it is simpler to move the processing of subdirectories there. To enable this, only add per-target files to obj-y. Use a separate variable for the linker dependencies, all-obj-y. This variable includes obj-y and also all objects that are taken from other directories. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move other target-*/ objects to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07dump: remove dumping stuff from cpu-all.hPaolo Bonzini
This simplifies things, because they will only be included for softmmu targets and because the stubs are taken out-of-line in separate files, which in the future could even be compiled only once. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07dump: do not compile dump.o for user-mode emulationPaolo Bonzini
It is not needed, because the monitor is not included. Cc: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move libobj-y variable to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move obj-TARGET-y variables to nested Makefile.objsPaolo Bonzini
Also drop duplicate occurrence of device-hotplug.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move *-user/ objects to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: do not sprinkle around GENERATED_HEADERS dependenciesPaolo Bonzini
Keeping GENERATED_HEADERS dependencies up-to-date everywhere is complex. We can simply make the Makefile depend on them, and they will be built before all other targets. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-04introduce a new monitor command 'dump-guest-memory' to dump guest's memoryWen Congyang
The command's usage: dump-guest-memory [-p] protocol [begin] [length] The supported protocol can be file or fd: 1. file: the protocol starts with "file:", and the following string is the file's path. 2. fd: the protocol starts with "fd:", and the following string is the fd's name. Note: 1. If you want to use gdb to process the core, please specify -p option. The reason why the -p option is not default is: a. guest machine in a catastrophic state can have corrupted memory, which we cannot trust. b. The guest machine can be in read-mode even if paging is enabled. For example: the guest machine uses ACPI to sleep, and ACPI sleep state goes in real-mode. 2. If you don't want to dump all guest's memory, please specify the start physical address and the length. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04target-i386: Add API to write elf notes to core fileWen Congyang
The core file contains register's value. These APIs write registers to core file, and them will be called in the following patch. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04implement cpu_get_memory_mapping()Wen Congyang
Walk cpu's page table and collect all virtual address and physical address mapping. Then, add these mapping into memory mapping list. If the guest does not use paging, it will do nothing. Note: the I/O memory will be skipped. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04Add API to create memory mapping listWen Congyang
The memory mapping list stores virtual address and physical address mapping. The virtual address and physical address are contiguous in the mapping. The folloing patch will use this information to create PT_LOAD in the vmcore. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-05-01cputlb: move TLB handling to a separate fileBlue Swirl
Move TLB handling and softmmu code load helpers to cputlb.c, compile only for softmmu targets. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-05-01Merge branch 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerberBlue Swirl
* 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber: Drop darwin-user configure: add '--disable-cocoa' switch raw-posix: Do not use CONFIG_COCOA macro
2012-05-01Merge branch 'qom-cpu-rest.v1' of git://github.com/afaerber/qemu-cpuBlue Swirl
* 'qom-cpu-rest.v1' of git://github.com/afaerber/qemu-cpu: Makefile: Simplify compilation of target-*/cpu.c target-mips: Start QOM'ifying CPU init target-mips: QOM'ify CPU target-m68k: Add QOM CPU subclasses target-m68k: Start QOM'ifying CPU init target-m68k: QOM'ify CPU reset target-m68k: QOM'ify CPU target-sh4: Start QOM'ifying CPU init target-sh4: QOM'ify CPU reset target-sh4: QOM'ify CPU MAINTAINERS: Downgrade target-mips and target-sh4 to Odd Fixes MAINTAINERS: Downgrade target-m68k to Odd Fixes
2012-05-01Drop darwin-userAndreas Färber
It's been orphaned, not compiling for a long time and despite Apple's drop of their Rosetta ppc emulation technology with Mac OS X Lion no one has stepped up to fix it. Testing necessary changes wrt QOM'ification thus is impossible, so we might as well remove it completely. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-30Makefile: Simplify compilation of target-*/cpu.cAndreas Färber
All targets except for ppc now have a standalone cpu.c file. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-30target-mips: QOM'ify CPUAndreas Färber
Embed CPUMIPSState as first member of QOM MIPSCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-04-30target-m68k: QOM'ify CPUAndreas Färber
Embed CPUM68KState as first member of QOM M68kCPU. Drop cpu_m68k_close() in favor of object_delete(). Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Laurent Vivier <Laurent@Vivier.EU> Tested-by: Laurent Vivier <Laurent@Vivier.EU>
2012-04-30target-sh4: QOM'ify CPUAndreas Färber
Embed CPUSH4State as first member of SuperHCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-25Beautify makefile commands for generation of files with tracetoolLluís Vilanova
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 17:13:46 +0000