| Age | Commit message (Collapse) | Author |
|---|
|
Some users prefer a single callback with length passed as parameter to
using b/w/l callbacks. It would maybe be cleaner to just pass length to
existing callbacks but that's a lot of churn. So for now add a wrapper.
For convenience use pcibus_t for address so a single callback can be
used for pci io and pci memory.
I did have to resort to preprocessor to reduce code duplication. It is
however slightly more straightforward, and better contained than what we
had with pci_host_template.h. Again, it would go away if we just passed
len to existing callbacks.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch for linux-user adapts the output of the emulated uname()
syscall to match the configured CPU. Tested with x86, x86-64 and arm
emulation.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Loïc Minier <lool@dooz.org>
|
|
It's currently not used by PPC machines. Refactor so that also Sparc64
machines can use it.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
|
|
There's nothing target-dependent in the virtio-serial code so allow it
to be compiled just once for all the targets.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.
The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.
This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.
As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using
-virtioconsole ...
is maintained, but the new, preferred way is to use
-device virtio-serial -device virtconsole,chardev=...
With this commit, multiple devices as well as multiple ports with a
single device can be supported.
For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.
In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.
This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This adds a few more vpath suffixes and points the remaining two paths
explicitly to $(SRC_PATH) in order to eliminate the VPATH assignment
from config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Move multiboot loading code into separate files as suggested by Alex Graf.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add generic support for debugging consoles (simple I/O ports which
when written to cause debugging output to be written to a target.)
The current implementation matches Bochs' port 0xe9, allowing the same
debugging code to be used for both Bochs and Qemu.
There is no vm state associated with the debugging port, simply
because it has none -- the entire interface is a single, stateless,
write-only port.
Most of the code was cribbed from the serial port driver.
v2: removed non-ISA variants (they can be introduced when/if someone
wants them, using code from the serial port); added configurable
readback (Bochs returns 0xe9 on a read from this register, mimic that
by default) This retains the apparently somewhat controversial user
friendly option, however.
v3: reimplemented the user friendly option as a synthetic option
("-debugcon foo" basically ends up being a parser-level shorthand for
"-chardev stdio,id=debugcon -device isa-debugcon,chardev=debugcon") --
this dramatically reduced the complexity while keeping the same level
of user friendliness.
v4: spaces, not tabs.
v5: update to match current top of tree. Calling qemu_chr_open()
already during parsing no longer works; defer until we are parsing the
other console-like devices.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The vpath directive has two advantages over the VPATH variable:
1) it allows to skip searching of .o files; 2) the default semantics
are to append to the vpath, so there is no confusion between "VPATH=xyz"
and "VPATH+=xyz".
Since "vpath %.c %.h PATH" is not valid, I'm introducing a wrapper
macro to append one or more directories to the vpath.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Juan has contributed a cool Makefile infrastructure that enables us to drop
static libraries completely:
Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-},
and link those object files directly into the executables.
Replace HWLIB by HWDIR, specifying only the directory.
Drop --whole-archive and ARLIBS in Makefiles and configure.
Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all
common objects after generating a target-specific header; add dependency
rules to Makefile and Makefile.target instead.
v2:
- Don't try to include /config.mak for user emulators
- Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted
by "user_only: compile everything with -fpie" (Kirill A. Shutemov)
v3:
- Fix dependency modelling for tools
- Remove comment on GENERATED_HEADERS obsoleted by this patch
Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Palle Lyckegaard <palle@lyckegaard.dk>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Cc: Juan Quintela <quintela@trasno.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
In order to use the new S390x virtio bus we just introduced, we also
need a machine description that sets up the machine according to our
PV specification.
Let's add that machine description and be happy!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
On S390x we don't want to go through the hassle of emulating real existing
hardware, because we don't need to for running Linux.
So let's instead implement a machine that is 100% based on VirtIO which we
fortunately implement already.
This patch implements the bus that is the groundwork for such an S390x
virtio machine.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Since commit a992fe3d0fc185112677286f7a02204d8245b61e
config-devices.h is no longer used.
So there is no need to keep the dependency rules
any longer.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add makefile dependencies for target specific device configs.
These will copy the default config if none exists, obsoleting the old
configure time code. If a config already exists but is older than the
default then print a warning.
Also remove config-devices.h. Code does not and should not care which
devices are being built.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Implement ARM RealView PBX-A9 board support.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Move some generic NICS into libhw, and build them for ARM targets.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Add SMSC LAN9118 ethernet emulation.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Based on a ideas of Daniel Jacobowitz + Stefan Weil
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds common routines for pcie host bridge and pcie mmcfg.
This will be used by q35 based chipset emulation.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
split static functions in pci_host.h into pci_host.c and
pci_host_template.h.
Later a structures declared in pci_host.h, PCIHostState, will be used.
However pci_host.h doesn't allow to include itself easily. This patches
addresses it.
pci_host.h includes functions which are instantiated in .c by including
pci_host.h with typedefing pci_addr_t.
pci_addr_t is per pci host bridge and is typedef'ed to uint32_t for ioio
or target_phys_addr_t for mmio in .c file.
That prevents from including pci_host.h to use PCIHostState because of
requiring type, pci_addr_t.
Its purpose to include is to instantiate io function for mmio or ioio
depending on which pci host bridge requires ioio or mmio.
To avoid including code, we always instantiate both version.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Instead of putting more and more stuff into vl.c, let's have the generic
functions that deal with asynchronous callbacks in their own file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch splits cmd646 specific code from pci.c.
This patch splits piix4 specific code from pci.c.
And compile new piix.o and cmd646.o when they are needed.
The only change that is not code movemet is removal of cmd646 specific parts
in bmdma_readb/writeb for piix.
Patchworks-ID: 35301
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Patchworks-ID: 35200
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Patchworks-ID: 35199
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
First user of new config-devices.mak
Patchworks-ID: 35198
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Generate config-devices.h for each target and config-all-devices.h for
common library. We don't want to name both config-devices.h to avoid
path problems
Patchworks-ID: 35195
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main
Makefile for them.
Patchworks-ID: 35196
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Patchworks-ID: 35194
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add config.h file that includes config-target.h and config-host.h
Patchworks-ID: 35193
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Include it directly in Makefile.target
Patchworks-ID: 35189
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Fix breakage in the following conditions:
- use in-tree building
- build user targets after system targets
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This reverts commit fe6549dfd76c278dbcd788b3c15c5e6e5ed32190.
tcg-runtime and host-utils are needed on 32 bit host and they are not part
of libqemu.a.
Thanks to Stefan Weil for reporting.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
This fixes compilation of linux-user with today qemu, please apply.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
See also facd2857783d58387885ad7cb1e4a8386f241738 and
34005a0060c176b3025a9e7c5d064615a9f80325.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The CPU state parameter is not used, remove it and adjust callers. Now we
can compile ioport.c once for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Get page size in device init.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Callers must pass ELF machine, byte swapping and symbol LSB clearing
information to ELF loader. A.out loader needs page size information, pass
that too as a parameter.
Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw.
Adjust callers. Also use target_phys_addr_t instead of target_ulong for
addresses: loader addresses aren't virtual.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
With this patch applied ide drives (when attached to a pci adapter) can
be created via -device, like this:
-drive if=none,id=mydisk,file=/path/to/disk.img
-device ide-drive,drive=mydisk,bus=ide.0,unit=0
Note that creating a master on ide1 doesn't work that way. That is a
side effect of qemu creating a cdrom automagically even if you don't
ask for it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Move ISA bus to HW library.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Build uset targers as true PIE if user want to keep qemu
self-virtualizable.
v5:
- Split into to patches: drop link hack and add PIE support
- do not build PIE by default and drop toolchain check
v4:
- Add test for toolchain if it has proper PIE support
v3:
- One more pice of the hack was removed
- Description updated
v2:
- Add configure options do enable/disable PIE for usermode targets.
Disabling can be useful if you build uswing toolchain which has
broken PIE support. PIE for usermode targets enabled by default.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Also split the isa bits into a separate source file, so we don't drag in
a dependency for isa-bus.o for machines which want ne2k_pci only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
