aboutsummaryrefslogtreecommitdiff
path: root/Makefile.objs
AgeCommit message (Collapse)Author
2018-10-02contrib: add elf2dmp toolViktor Prutyanov
elf2dmp is a converter from ELF dump (produced by 'dump-guest-memory') to Windows MEMORY.DMP format (also know as 'Complete Memory Dump') which can be opened in WinDbg. This tool can help if VMCoreInfo device/driver is absent in Windows VM and 'dump-guest-memory -w' is not available but dump can be created in ELF format. The tool works as follows: 1. Determine the system paging root looking at GS_BASE or KERNEL_GS_BASE to locate the PRCB structure and finds the kernel CR3 nearby if QEMU CPU state CR3 is not suitable. 2. Find an address within the kernel image by dereferencing the first IDT entry and scans virtual memory upwards until the start of the kernel. 3. Download a PDB matching the kernel from the Microsoft symbol store, and figure out the layout of certain relevant structures necessary for the dump. 4. Populate the corresponding structures in the memory image and create the appropriate dump header. Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com> Message-Id: <1535546488-30208-3-git-send-email-viktor.prutyanov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-20hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog modulePeter Maydell
The Arm Cortex-M System Design Kit includes a simple watchdog module based on a 32-bit down-counter. Implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08hw/i2c: Add trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606191801.6331-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-30trace: Sort trace-events-subdirsPhilippe Mathieu-Daudé
Having these entries sorted helps to add new ones. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180528054055.21153-1-f4bug@amsat.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-05-23job: Add lifecycle QMP commandsKevin Wolf
This adds QMP commands that control the transition between states of the job lifecycle. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23job: Introduce qapi/job.jsonKevin Wolf
This adds a separate schema file for all job-related definitions that aren't tied to the block layer. For a start, move the enums JobType, JobStatus and JobVerb. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-05-23job: Create Job, JobDriver and job_create()Kevin Wolf
This is the first step towards creating an infrastructure for generic background jobs that aren't tied to a block device. For now, Job only stores its ID and JobDriver, the rest stays in BlockJob. The following patches will move over more parts of BlockJob to Job if they are meaningful outside the context of a block job. BlockJob.driver is now redundant, but this patch leaves it around to avoid unnecessary churn. The next patches will get rid of almost all of its uses anyway so that it can be removed later with much less churn. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-03-12build: enable audio modulesGerd Hoffmann
Add audio/ to common-obj-m variable. Also run both audio and ui variables through unnest-vars. This avoids sdl.mo (exists in both audio/ and ui/) name clashes. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180306074053.22856-4-kraxel@redhat.com
2018-03-08Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanberger/tags/pull-tpm-2018-03-07-1' into staging Merge tpm 2018/03/07 # gpg: Signature made Wed 07 Mar 2018 12:42:13 GMT # gpg: using RSA key 75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2018-03-07-1: tpm: convert tpm_tis.c to use trace-events tpm: convert tpm_emulator.c to use trace-events tpm: convert tpm_util.c to use trace-events tpm: convert tpm_passthrough.c to use trace-events tpm: convert tpm_crb.c to use trace-events Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-06tpm: convert tpm_crb.c to use trace-eventsStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-05Merge remote-tracking branch 'remotes/kraxel/tags/ui-20180305-pull-request' ↵Peter Maydell
into staging ui: build curses, gtk and sdl as modules. # gpg: Signature made Mon 05 Mar 2018 08:48:24 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20180305-pull-request: ui/sdl: build as module audio: rename CONFIG_* to CONFIG_AUDIO_* ui/curses: build as module ui/gtk: build as module configure: opengl doesn't depend on x11 configure: add X11 vars to config-host.mak console: add ui module loading support console: add and use qemu_display_find_default egl-headless: switch over to new display registry curses: switch over to new display registry cocoa: switch over to new display registry sdl: switch over to new display registry console: add qemu display registry, add gtk Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05console: add ui module loading supportGerd Hoffmann
If a requested user interface is not available, try loading it as module, simliar to block layer modules. Needed to keep things working when followup patches start to build user interfaces as modules. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-8-kraxel@redhat.com
2018-03-02qapi: Move qapi-schema.json to qapi/, rename generated filesMarkus Armbruster
Move qapi-schema.json to qapi/, so it's next to its modules, and all files get generated to qapi/, not just the ones generated for modules. Consistently name the generated files qapi-MODULE.EXT: qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch]. This gets rid of the temporary hacks in scripts/qapi/commands.py, scripts/qapi/events.py, and scripts/qapi/common.py. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-28-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Generate separate .h, .c for each moduleMarkus Armbruster
Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi/types qapi/visit: Generate built-in stuff into separate filesMarkus Armbruster
Linking code from multiple separate QAPI schemata into the same program is possible, but involves some weirdness around built-in types: * We generate code for built-in types into .c only with option --builtins. The user is responsible for generating code for exactly one QAPI schema per program with --builtins. * We generate code for built-in types into .h regardless of --builtins, but guarded by #ifndef QAPI_VISIT_BUILTIN. Because all copies of this code are exactly the same, including any combination of these headers works. Replace this contraption by something more conventional: generate code for built-in types into their very own files: qapi-builtin-types.c, qapi-builtin-visit.c, qapi-builtin-types.h, qapi-builtin-visit.h, but only with --builtins. Obey --output-dir, but ignore --prefix for them. Make qapi-types.h include qapi-builtin-types.h. With multiple schemata you now have multiple qapi-types.[ch], but only one qapi-builtin-types.[ch]. Same for qapi-visit.[ch] and qapi-builtin-visit.[ch]. Bonus: if all you need is built-in stuff, you can include a much smaller header. To be exploited shortly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-21-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [eblake: fix octal constant for python 3] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Rename generated qmp-marshal.c to qmp-commands.cMarkus Armbruster
All generated .c are named like their .h, except for qmp-marshal.c and qmp-commands.h. To add to the confusion, tests-qmp-commands.c falsely matches generated test-qmp-commands.h. Get rid of this unnecessary complication. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-19-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-19hw/rdma: Implementation of PVRDMA deviceYuval Shaia
PVRDMA is the QEMU implementation of VMware's paravirtualized RDMA device. It works with its Linux Kernel driver AS IS, no need for any special guest modifications. While it complies with the VMware device, it can also communicate with bare metal RDMA-enabled machines and does not require an RDMA HCA in the host, it can work with Soft-RoCE (rxe). It does not require the whole guest RAM to be pinned allowing memory over-commit and, even if not implemented yet, migration support will be possible with some HW assistance. Implementation is divided into 2 components, rdma general and pvRDMA specific functions and structures. The second PVRDMA sub-module - interaction with PCI layer. - Device configuration and setup (MSIX, BARs etc). - Setup of DSR (Device Shared Resources) - Setup of device ring. - Device management. Reviewed-by: Dotan Barak <dotanb@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-02-19hw/rdma: Implementation of generic rdma device layersYuval Shaia
This layer is composed of two sub-modules, backend and resource manager. Backend sub-module is responsible for all the interaction with IB layers such as ibverbs and umad (external libraries). Resource manager is a collection of functions and structures to manage RDMA resources such as QPs, CQs and MRs. Reviewed-by: Dotan Barak <dotanb@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-02-16cuda: convert to trace-eventsMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-31hw/hppa: Implement DINO system boardHelge Deller
Now that we have the prerequisites in target/hppa/, implement the hardware for a PA7100LC. This also enables build for hppa-softmmu. Signed-off-by: Helge Deller <deller@gmx.de> [rth: Since it is all new code, squashed all branch development withing hw/hppa/ to a single patch.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-24sabre: convert from SABRE_DPRINTF macro to trace-eventsMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Michael S. Tsirkin <mst@redhat.com> CC: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [for addition of trace-events to hw/pci-host] Acked-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18contrib/vhost-user-blk: introduce a vhost-user-blk sample applicationChangpeng Liu
This commit introduces a vhost-user-blk backend device, it uses UNIX domain socket to communicate with QEMU. The vhost-user-blk sample application should be used with QEMU vhost-user-blk-pci device. To use it, complie with: make vhost-user-blk and start like this: vhost-user-blk -b /dev/sdb -s /path/vhost.socket Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-09sparc64: introduce trace-events for hw/sparc64Mark Cave-Ayland
This is in preparation for switching code in hw/sparc64 from DPRINTF over to trace events. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-10-25tpm: add stubsPhilippe Mathieu-Daudé
Commit c37cacabf22 moved tpm_cleanup() in the main loop exit, however this function is not available when compiling with --disable-tpm. Provides necessary stubs to keep code clean of #ifdef'fery. Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20171023102903.256AF7456A0@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-10build-sys: make vhost-user-scsi depend on libvhost-user.aMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi, file-posix: add support for persistent reservation managementPaolo Bonzini
It is a common requirement for virtual machine to send persistent reservations, but this currently requires either running QEMU with CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged QEMU bypass Linux's filter on SG_IO commands. As an alternative mechanism, the next patches will introduce a privileged helper to run persistent reservation commands without expanding QEMU's attack surface unnecessarily. The helper is invoked through a "pr-manager" QOM object, to which file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and PERSISTENT RESERVE IN commands. For example: $ qemu-system-x86_64 -device virtio-scsi \ -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock -drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0 -device scsi-block,drive=hd or: $ qemu-system-x86_64 -device virtio-scsi \ -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock -blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0 -device scsi-block,drive=hd Multiple pr-manager implementations are conceivable and possible, though only one is implemented right now. For example, a pr-manager could: - talk directly to the multipath daemon from a privileged QEMU (i.e. QEMU links to libmpathpersist); this makes reservation work properly with multipath, but still requires CAP_SYS_RAWIO - use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though) - more interestingly, implement reservations directly in QEMU through file system locks or a shared database (e.g. sqlite) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move non-emulation specific code to scsi/Paolo Bonzini
util/scsi.c includes some SCSI code that is shared by block/iscsi.c and hw/scsi, but the introduction of the persistent reservation helper will add many more instances of this. There is also include/block/scsi.h, which actually is not part of the core block layer. The persistent reservation manager will also need a home. A scsi/ directory provides one for both the aforementioned shared code and the PR manager code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-18IDE: replace DEBUG_IDE with tracing systemJohn Snow
Remove the DEBUG_IDE preprocessor definition with something more appropriately flexible, using the trace-events subsystem. This will be less prone to bitrot and will more effectively allow us to target just the functions we care about. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170901001502.29915-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2017-09-15buildsys: Move seccomp cflags/libs to per objectFam Zheng
Like many other libraries, libseccomp cflags and libs should only apply to the building of necessary objects. Do so in the usual way with the help of per object variables. Signed-off-by: Fam Zheng <famz@redhat.com>
2017-07-20configure: Don't build ivshmem tools unless CONFIG_IVSHMEM is setKamil Rytarowski
Don't try to build the ivshmem-server and ivshmem-client tools unless CONFIG_IVSHMEM is set. This fixes in passing a build bug on NetBSD, which fails to build the ivshmem tools because they use shm_open() and on NetBSD that requires linking against -lrt. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org [PMM: moved some code into earlier patches; minor bugfixes; added commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-11backends: remove empty trace-events fileDaniel P. Berrange
The content of the backends/trace-events file was entirely removed in commit 6b10e573d15ef82dbc5c5b3726028e6642e134f6 Author: Marc-André Lureau <marcandre.lureau@redhat.com> Date: Mon May 29 12:39:42 2017 +0400 char: move char devices to chardev/ Leaving the empty file around, causes tracetool to generate an empty .dtrace file which makes the dtrace compiler throw a syntax error. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170629162046.4135-1-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-10nbd: use generic trace subsystem instead of TRACE macroVladimir Sementsov-Ogievskiy
Let NBD use the trace mechanisms already present in qemu. Now you can use the -trace optino of qemu, or the -T/--trace option of qemu-img, qemu-io, and qemu-nbd, to select nbd traces. For qemu, the QMP commands trace-event-{get,set}-state can also toggle tracing on the fly. Example: qemu-nbd --trace 'nbd_*' <image file> # enables all nbd traces Recompilation with CFLAGS=-DDEBUG_NBD is no more needed, furthermore, DEBUG_NBD macro is removed from the code. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20170707152918.23086-11-vsementsov@virtuozzo.com> [eblake: minor tweaks to a couple of traces] Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-04Makefile: Move bootdevice.o to common-obj-yThomas Huth
There does not seem to be any target specific code in this file, so we can put it into "common-obj" instead of "obj" to compile it only once for all targets. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1498454578-18709-7-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15vhost-user-scsi: Introduce a vhost-user-scsi sample applicationFelipe Franciosi
This commit introduces a vhost-user-scsi backend sample application. It must be linked with libiscsi and libvhost-user. To use it, compile with: $ make vhost-user-scsi And run as follows: $ ./vhost-user-scsi -u vus.sock -i iscsi://uri_to_target/ $ qemu-system-x86_64 --enable-kvm -m 512 \ -object memory-backend-file,id=mem,size=512m,share=on,mem-path=guestmem \ -numa node,memdev=mem \ -chardev socket,id=vhost-user-scsi,path=vus.sock \ -device vhost-user-scsi-pci,chardev=vhost-user-scsi \ The application is currently limited at one LUN only and it processes requests synchronously (therefore only achieving QD1). The purpose of the code is to show how a backend can be implemented and to test the vhost-user-scsi Qemu implementation. If a different instance of this vhost-user-scsi application is executed at a remote host, a VM can be live migrated to such a host. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Message-Id: <1488479153-21203-5-git-send-email-felipe@nutanix.com>
2017-06-15accel: move kvm related accelerator files into accel/Yang Zhong
move kvm related accelerator files into accel/ subdirectory, also create one stub subdirectory, which will include accelerator's stub files. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <1496383606-18060-5-git-send-email-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15tcg: move tcg related files into accel/tcg/ subdirectoryYang Zhong
move cputlb.c, cpu-exec-common.c and cpu-exec.c related tcg exec file into accel/tcg/ subdirectory. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <1496383606-18060-3-git-send-email-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15accel: split the tcg accelerator from accel.c fileYang Zhong
there are some types of accelerators in qemu, and all accelerators have their own file except tcg. tcg accelerator is also defined in accel.c file. tcg accelerator file will be splited from accel.c and re-name to tcg-all.c. accel/ directory will be created to include kvm and tcg related files. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <1496383606-18060-2-git-send-email-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-02char: move char devices to chardev/Marc-André Lureau
Suggested by Paolo Bonzini during series review. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-05-17migration: Move page_cache.c to migration/Juan Quintela
It is only used by migration, so move it there. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-03-20target-mips: replace few LOG_DISAS() with trace pointsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21block: move AioContext, QEMUTimer, main-loop to libqemuutilPaolo Bonzini
AioContext is fairly self contained, the only dependency is QEMUTimer but that in turn doesn't need anything else. So move them out of block-obj-y to avoid introducing a dependency from io/ to block-obj-y. main-loop and its dependency iohandler also need to be moved, because later in this series io/ will call iohandler_get_aio_context. [Changed copyright "the QEMU team" to "other QEMU contributors" as suggested by Daniel Berrange and agreed by Paolo. --Stefan] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20170213135235.12274-2-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-20Add wctablet deviceAnatoli Huseu1
Add QEMU Wacom Penpartner serial tablet emulation. GSoC 2016 project. Signed-off-by: Anatoli Huseu1 <avg.tolik@gmail.com> Various cleanups. Add line speed tracking. Implement ST and SP commands. Adapted to chardev QOMification. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1486391007-10116-1-git-send-email-kraxel@redhat.com
2017-02-02Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Wed 01 Feb 2017 13:44:32 GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: clean up trace-events files qapi: add missing trace_visit_type_enum() call trace: improve error reporting when parsing simpletrace header trace: update docs to reflect new code generation approach trace: switch to modular code generation for sub-directories trace: move setting of group name into Makefiles trace: move hw/i386/xen events to correct subdir trace: move hw/xen events to correct subdir trace: move hw/block/dataplane events to correct subdir make: move top level dir to end of include search path # Conflicts: # Makefile Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-31char: create chardev-obj-yMarc-André Lureau
This will help to split char.c in several units without having to reference them all everywhere. This is useful in particular for tests. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-01-31trace: switch to modular code generation for sub-directoriesDaniel P. Berrange
Introduce rules in the top level Makefile that are able to generate trace.[ch] files in every subdirectory which has a trace-events file. The top level directory is handled specially, so instead of creating trace.h, it creates trace-root.h. This allows sub-directories to include the top level trace-root.h file, without ambiguity wrt to the trace.g file in the current sub-dir. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-7-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31trace: move hw/i386/xen events to correct subdirDaniel P. Berrange
The trace-events for a given source file should generally always live in the same directory as the source file. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-5-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31trace: move hw/xen events to correct subdirDaniel P. Berrange
The trace-events for a given source file should generally always live in the same directory as the source file. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-4-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31trace: move hw/block/dataplane events to correct subdirDaniel P. Berrange
The trace-events for a given source file should generally always live in the same directory as the source file. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-3-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31char: move to chardev/Marc-André Lureau
The following commits will split char.c in several files. Let's put them in a subdirectory. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-26 14:35:25 +0000