aboutsummaryrefslogtreecommitdiff
path: root/Makefile.objs
AgeCommit message (Collapse)Author
2014-03-13iothread: add I/O thread objectStefan Hajnoczi
This is a stand-in for Michael Roth's QContext. I expect this to be replaced once QContext is completed. The IOThread object is an AioContext event loop thread. This patch adds the concept of multiple event loop threads, allowing users to define them. When SMP guests run on SMP hosts it makes sense to instantiate multiple IOThreads. This spreads event loop processing across multiple cores. Note that additional patches are required to actually bind a device to an IOThread. [Andreas Färber <afaerber@suse.de> pointed out that the embedded parent object instance should be called "parent_obj" and have a newline afterwards. This patch has been changed to reflect this. -- Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-04hw/9pfs: Include virtio-9p-device.o in buildAneesh Kumar K.V
After commit ba1183da9a10b94611cad88c44a5c6df005f9b55 we are including hw/Makefile.objs directly from Makefile.target. Make sure hw/Makefile.objs rules doesn't depend on variable defined in Makefile.objs Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2014-02-20Makefile: introduce common-obj-m and block-obj-m for DSOFam Zheng
$(common-obj-m) will include $(block-obj-m), like $(common-obj-y) does for $(block-obj-y). Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20rules.mak: fix $(obj) to a real relative pathFam Zheng
Makefile.target includes rule.mak and unnested common-obj-y, then prefix them with '../', this will ignore object specific QEMU_CFLAGS in subdir Makefile.objs: $(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS) Because $(obj) here is './block', instead of '../block'. This doesn't hurt compiling because we basically build all .o from top Makefile, before entering Makefile.target, but it will affact arriving per-object libs support. The starting point of $(obj) is passed in as argument of unnest-vars, as well as nested variables, so that different Makefiles can pass in a right value. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-22readline: move readline to a generic locationStefan Hajnoczi
Now that the monitor and readline are decoupled, readline.h no longer belongs in include/monitor/. Put the header into include/qemu/. Move the source file into util/ so it can be linked as part of libqemuutil.a. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-13qemu-file: Move QEMUFile code to qemu-file.cEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13vmstate: Move VMState code to vmstate.cEduardo Habkost
This will allow unit tests to be written for VMState code without pulling dependencies from the savevm code. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-09-09qemu-ga: Add Windows VSS provider and requester as DLLTomoki Sekiyama
Adds VSS provider and requester as a qga-vss.dll, which is loaded by Windows VSS service as well as by qemu-ga. "provider.cpp" implements a basic stub of a software VSS provider. Currently, this module only relays a frozen event from VSS service to the agent, and thaw event from the agent to VSS service, to block VSS process to keep the system frozen while snapshots are taken at the host. To register the provider to the guest system as COM+ application, the type library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl), VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also adds pre-compiled .tlb file in the repository in order to enable cross-compile qemu-ga.exe for Windows with VSS support. "requester.cpp" provides the VSS requester to kick the VSS snapshot process. Qemu-ga.exe works without the DLL, although fsfreeze features are disabled. These functions are only supported in Windows 2003 or later. In older systems, fsfreeze features are disabled. In several versions of Windows which don't support attribute VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error. To solve this fundamentally, we need a framework to handle mount writable snapshot on guests, which is required by VSS auto-recovery feature (cleanup phase after a snapshot is taken). Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-08-12w32: Add missing version.o to all executables (fix regression)Stefan Weil
QEMU executables for w32, w64 had included meta information built from version.rc. These rules were changed several times some months ago. The latest version added version.o to the tools, but not to the system emulations. This patch adds the meta information to all system emulations again. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1375985887-3984-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23rdma: core logicMichael R. Hines
Code that does need to be visible is kept well contained inside this file and this is the only new additional file to the entire patch. This file includes the entire protocol and interfaces required to perform RDMA migration. Also, the configure and Makefile modifications to link this file are included. Full documentation is in docs/rdma.txt Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-06Make qemu-io commands available in HMPKevin Wolf
It was decided to not make this command available in QMP in order to make clear that this is not supposed to be a stable API and should be used only for testing and debugging purposes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-06target-i386: Add "feature-words" property to X86CPUEduardo Habkost
This property will be useful for libvirt, as libvirt already has logic based on low-level feature bits (not feature names), so it will be really easy to convert the current libvirt logic to something using the "feature-words" property. The property will have two main use cases: - Checking host capabilities, by checking the features of the "host" CPU model - Checking which features are enabled on each CPU model Example output: $ ./QMP/qmp --path=/tmp/m \ qom-get --path=/machine/icc-bridge/icc/child[0] \ --property=feature-words item[0].cpuid-register: EDX item[0].cpuid-input-eax: 2147483658 item[0].features: 0 item[1].cpuid-register: EAX item[1].cpuid-input-eax: 1073741825 item[1].features: 0 item[2].cpuid-register: EDX item[2].cpuid-input-eax: 3221225473 item[2].features: 0 item[3].cpuid-register: ECX item[3].cpuid-input-eax: 2147483649 item[3].features: 101 item[4].cpuid-register: EDX item[4].cpuid-input-eax: 2147483649 item[4].features: 563346425 item[5].cpuid-register: EBX item[5].cpuid-input-eax: 7 item[5].features: 0 item[5].cpuid-input-ecx: 0 item[6].cpuid-register: ECX item[6].cpuid-input-eax: 1 item[6].features: 2155880449 item[7].cpuid-register: EDX item[7].cpuid-input-eax: 1 item[7].features: 126614521 Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-24libcacard: move atr setting from macro to functionAlon Levy
Only because qemu's checkpatch complains about it. Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-15tpm: reorganize headers and split hardware partPaolo Bonzini
The TPM subsystem does not have a full front-end/back-end separation. The sole available backend, tpm_passthrough, depends on the data structures of the sole available frontend, tpm_tis. However, we can at least try to split the user interface (tpm.c) from the implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h, which is shared between tpm_tis.c and tpm_passthrough.c; instead it moves more stuff to tpm_backend.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08configure: Don't fall back to gthread coroutine backendPeter Maydell
The gthread coroutine backend is broken and does not produce a working QEMU; it is only useful for some very limited debugging situations. Clean up the backend selection logic in configure so that it now runs "if on windows use windows; else prefer ucontext; else sigaltstack". To do this we refactor the configure code to separate out "test whether we have a working ucontext", "pick a default if user didn't specify" and "validate that user didn't specify something invalid", rather than having all three of these run together. We also simplify the Makefile logic so it just links in the backend the configure script selects. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1365419487-19867-3-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12Support for TPM command line optionsStefan Berger
This patch adds support for TPM command line options. The command line options supported here are ./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id> -device tpm-tis,tpmdev=<id>,id=<other id> and ./qemu-... -tpmdev help where the latter works similar to -soundhw help and shows a list of available TPM backends (for example 'passthrough'). Using the type parameter, the backend is chosen, i.e., 'passthrough' for the passthrough driver. The interpretation of the other parameters along with determining whether enough parameters were provided is pushed into the backend driver, which needs to implement the interface function 'create' and return a TPMDriverOpts structure if the VM can be started or 'NULL' if not enough or bad parameters were provided. Monitor support for 'info tpm' has been added. It for example prints the following: (qemu) info tpm TPM devices: tpm0: model=tpm-tis \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-01hw: move device-hotplug.o to toplevel, compile it oncePaolo Bonzini
The situation with device-hotplug.c is similar to qdev-monitor.c. Add a stub for pci_drive_hot_add, so that it can be compiled once, and move it out of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move qdev-monitor.o to toplevel directoryPaolo Bonzini
qdev-monitor.c is the only "core qdev" file that is not used in user-mode emulation, and it does not define anything that is used by hardware models. Remove it from the hw/ directory and remove hw/qdev-monitor.h from hw/qdev.h too; this requires some files to have some new explicitly includes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-18qtest: Add MMIO supportAndreas Färber
Introduce [qtest_]{read,write}[bwlq]() libqtest functions and corresponding QTest protocol commands to replace local versions in libi2c-omap.c. Also convert m48t59-test's cmos_{read,write}_mmio() to {read,write}b(). Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1361051043-27944-4-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01Move XBZRLE encoding code to a separate file to allow testingOrit Wasserman
Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-01-26build: remove extra-obj-yPaolo Bonzini
extra-obj-y is somewhat complicated to understand. Replace it with a special CONFIG_ALL symbol that is defined only at toplevel. This limits the case of directories defining more than one *-obj-y target. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-26build: remove universal-obj-yPaolo Bonzini
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how we define symbols for hardware components. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-26build: use -$(CONFIG_SECCOMP) instead of ifeqPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-26build: move around libcacard-y definitionPaolo Bonzini
It is also needed if !CONFIG_SOFTMMU, unlike everything that surrounds it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-12build: fold trace-obj-y into libqemuutil.aPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: remove coroutine-obj-yPaolo Bonzini
Just fold it into block-obj-y. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: move version-obj-y to the generic LINK rulePaolo Bonzini
There is no reason for it to be in block-obj-y, in particular. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: move base QAPI files to libqemuutil.aPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: move QAPI definitions for QEMU out of qapi-obj-yPaolo Bonzini
There is no reason why for example qemu-ga should include all the definitions for the QEMU monitor. However, there are a few that are needed (qapi_free_SocketAddress, qapi_free_InetSocketAddress, ErrorClass_lookup). These should be moved to a separate "core" .json schema that goes into libqemuutil.a. For now, make this clearer by moving the qapi-*.o definitions out of libqemuutil.a. Once the above refactoring is done, qga-obj-y should not include anymore qapi-types.o and qapi-visit.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: consolidate multiple variables into universal-obj-yPaolo Bonzini
The directory descent mechanism, and a less-flat tree both helped in making some *-obj-y definitions very short. Many of these often end up in universal-obj-y, and used to be separate only because of libuser (which is now part of history...). Consolidate these variables in a single one. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: move qobject files to qobject/ and libqemuutil.aPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: move libqemuutil.a components to util/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: move files away from tools-obj-y, common-obj-y, user-obj-yPaolo Bonzini
Split them between libqemuutil.a and, for those used by qemu-img/io/nbd, block-obj-y. Static libraries ensure that binaries such as qemu-ga do not include unused modules. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: move util-obj-y to libqemuutil.aPaolo Bonzini
Use a static library to eliminate repetition in the linking rules. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: rename oslib-obj-y to util-obj-yPaolo Bonzini
This prepares the creation of libqemuutil.a in the next patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12stubs: fully replace qemu-tool.c and qemu-user.cPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-08qdev: Include qdev code into *-user, tooEduardo Habkost
The code depends on some functions from qemu-option.o, so add qemu-option.o to universal-obj-y to make sure it's included. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-06tests: add gcov supportBlue Swirl
Add support for compiling for GCOV test coverage, enabled with '--enable-gcov' during configure. Test coverage will be reported after each test. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-23build: Use separate makefile for "trace/"Lluís Vilanova
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> -- Changes in v2: * Do not depend on "qemu-timer-common.o". * Use "$(obj)" in rules to refer to the build sub-directory. * Remove dependencies against "$(GENERATED_HEADERS)". Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-20migration: move buffered_file.c code into migration.cJuan Quintela
This only moves the code (also from buffered_file.h to migration.h). Fix whitespace until checkpatch is happy. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-19ui: move files to ui/ and include/ui/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qemu-ga: move qemu-ga files to qga/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: move net.c to net/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libuserPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17Merge commit '1dd3a74d2ee2d873cde0b390b536e45420b3fe05' into HEADPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-18build: replace weak symbols with a static libraryPaolo Bonzini
Weak symbols were a nice idea, but they turned out not to be a good one. Toolchain support is just too sparse, in particular llvm-gcc is totally broken. This patch uses a surprisingly low-tech approach: a static library. Symbols in a static library are always overridden by symbols in an object file. Furthermore, if you place each function in a separate source file, object files for unused functions will not be taken in. This means that each function can use all the dependencies that it needs (especially QAPI stuff such as error_setg). Thus, all stubs are placed in separate object files and put together in a static library. The library then is linked to all programs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-16rng: add RndBackend abstract object classAnthony Liguori
This is the backend used by devices that need to request entropy. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-05pflib: unused, remove it.Gerd Hoffmann
Replaced by pixman library. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01Merge remote-tracking branch 'kraxel/pixman.v3' into stagingAnthony Liguori
* kraxel/pixman.v3: (22 commits) pixman: drop obsolete fields from DisplaySurface pixman/vnc: remove dead code. pixman/vnc: remove rgb_prepare_row* functions pixman/vnc: use pixman images in vnc. pixman: switch screendump function. vga: stop direct access to DisplaySurface fields. qxl: stop direct access to DisplaySurface fields. console: don't set PixelFormat alpha fields for 32bpp console: make qemu_alloc_display static pixman: add pixman image to DisplaySurface pixman: helper functions pixman: windup in configure & makefiles pixman: add submodule console: remove DisplayAllocator console: remove dpy_gfx_fill vga: fix text mode updating console: init displaychangelisteners on register console: untangle gfx & txt updates console: s/TextConsole/QemuConsole/ console: move set_mouse + cursor_define callbacks ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-28 10:25:58 +0000