aboutsummaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)Author
2018-06-15qobject: Move block-specific qdict code to block-qdict.cMarkus Armbruster
Pure code motion, except for two brace placements and a comment tweaked to appease checkpatch. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-12MAINTAINERS: Add entries for the MOS6522 VIA devicePhilippe Mathieu-Daudé
Introduced in 51f233ec92c. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12MAINTAINERS: Add an entry for the MacIO device headersPhilippe Mathieu-Daudé
Missed while moved in 7092e84d42b. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-08MAINTAINERS: Add the cdrom-test to John's sectionThomas Huth
The cdrom-test checks various block types - IDE, SCSI and virtio, so it's a little bit hard to decide where this should belong to in the MAINTAINERS file. But John volunteered to take it, so let's put it into the IDE section for now. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08slirp: Add Samuel Thibault's staging tree for slirpSamuel Thibault
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Thomas Huth <thuth@redhat.com>
2018-05-31MAINTAINERS: Add entries for newer MPS2 boards and devicesPeter Maydell
Add entries to MAINTAINERS to cover the newer MPS2 boards and the new devices they use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180518153157.14899-1-peter.maydell@linaro.org
2018-05-24Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180524-pull-request' ↵Peter Maydell
into staging vga: catch depth 0 hw/display: add new bochs-display device some cleanups. # gpg: Signature made Thu 24 May 2018 16:45:46 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180524-pull-request: MAINTAINERS: add vga entries bochs-display: add pcie support bochs-display: add dirty tracking support hw/display: add new bochs-display device vga-pci: use PCI_VGA_MMIO_SIZE vga: move bochs vbe defines to header file vga: catch depth 0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-24Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, pci, virtio, vhost: fixes, features Beginning of merging vDPA, new PCI ID, a new virtio balloon stat, intel iommu rework fixing a couple of security problems (no CVEs yet), fixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 23 May 2018 15:41:32 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (28 commits) intel-iommu: rework the page walk logic util: implement simple iova tree intel-iommu: trace domain id during page walk intel-iommu: pass in address space when page walk intel-iommu: introduce vtd_page_walk_info intel-iommu: only do page walk for MAP notifiers intel-iommu: add iommu lock intel-iommu: remove IntelIOMMUNotifierNode intel-iommu: send PSI always even if across PDEs nvdimm: fix typo in label-size definition contrib/vhost-user-blk: enable protocol feature for vhost-user-blk hw/virtio: Fix brace Werror with clang 6.0.0 libvhost-user: Send messages with no data vhost-user+postcopy: Use qemu_set_nonblock virtio: support setting memory region based host notifier vhost-user: support receiving file descriptors in slave_read vhost-user: add Net prefix to internal state structure linux-headers: add kvm header for mips linux-headers: add unistd.h on all arches update-linux-headers.sh: unistd.h, kvm consistency ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-24MAINTAINERS: add vga entriesGerd Hoffmann
Add entries for standard vga, virtio-gpu and cirrus. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180522165058.15404-7-kraxel@redhat.com
2018-05-23util: implement simple iova treePeter Xu
Introduce a simplest iova tree implementation based on GTree. CC: QEMU Stable <qemu-stable@nongnu.org> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23job: Add lifecycle QMP commandsKevin Wolf
This adds QMP commands that control the transition between states of the job lifecycle. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23job: Introduce qapi/job.jsonKevin Wolf
This adds a separate schema file for all job-related definitions that aren't tied to the block layer. For a start, move the enums JobType, JobStatus and JobVerb. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-05-23job: Create Job, JobDriver and job_create()Kevin Wolf
This is the first step towards creating an infrastructure for generic background jobs that aren't tied to a block device. For now, Job only stores its ID and JobDriver, the rest stays in BlockJob. The following patches will move over more parts of BlockJob to Job if they are meaningful outside the context of a block job. BlockJob.driver is now redundant, but this patch leaves it around to avoid unnecessary churn. The next patches will get rid of almost all of its uses anyway so that it can be removed later with much less churn. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-10MAINTAINERS: Add trace-events and qemu-option-trace.texi to tracing sectionThomas Huth
The "trace-events" and "qemu-option-trace.texi" files in the top directory are currently "unmaintained" according to scripts/get_maintainer.pl. They obviously belong to the Tracing section, so add an entry for them there. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1525840700-30635-1-git-send-email-thuth@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-05-03MAINTAINERS: update Marcel Apfelbaum emailMarcel Apfelbaum
Use my gmail account for maintainer tasks. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <20180426084523.10565-1-marcel@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
2018-03-27MAINTAINERS: add include/block/aio-wait.hStefan Hajnoczi
The include/block/aio-wait.h header file was added by commit 7719f3c968c59e1bcda7e177679dc765b59e578f ("block: extract AIO_WAIT_WHILE() from BlockDriverState") without updating MAINTAINERS. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180312132204.23683-1-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-17Merge remote-tracking branch 'remotes/xtensa/tags/20180316-xtensa' into stagingPeter Maydell
target/xtensa linux-user support. - small cleanup for xtensa registers dumping (-d cpu); - add support for debugging linux-user process with xtensa-linux-gdb (as opposed to xtensa-elf-gdb), which can only access unprivileged registers; - enable MTTCG for target/xtensa; - cleanup in linux-user/mmap area making sure that it works correctly with limited 30-bit-wide user address space; - import xtensa-specific definitions from the linux kernel, conditionalize user-only/softmmu-only code and add handlers for signals, exceptions, process/thread creation and core registers dumping. # gpg: Signature made Fri 16 Mar 2018 16:46:19 GMT # gpg: using RSA key 51F9CC91F83FA044 # gpg: Good signature from "Max Filippov <filippov@cadence.com>" # gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" # Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044 * remotes/xtensa/tags/20180316-xtensa: MAINTAINERS: fix W: address for xtensa qemu-binfmt-conf.sh: add qemu-xtensa target/xtensa: add linux-user support linux-user: drop unused target_msync function linux-user: fix target_mprotect/target_munmap error return values linux-user: fix assertion in shmdt linux-user: fix mmap/munmap/mprotect/mremap/shmat target/xtensa: support MTTCG target/xtensa: use correct number of registers in gdbstub target/xtensa: mark register windows in the dump target/xtensa: dump correct physical registers Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # linux-user/syscall.c
2018-03-16MAINTAINERS: fix W: address for xtensaMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-03-12hw/isa/superio: Add the SMC FDC37C669 Super I/OPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-23-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12MAINTAINERS: Split the Alpha TCG/machine sectionPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-22-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12MAINTAINERS: Add entries for the VT82C686B Super I/OPhilippe Mathieu-Daudé
So far, it is only used by the MIPS Fulong 2E mini PC. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-21-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/superio: Add a Super I/O template based on the PC87312 devicePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-9-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12MAINTAINERS: Fix the PC87312 include pathPhilippe Mathieu-Daudé
Missed while moving it in 0d09e41a51aa. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-5-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/input/i8042: Extract declarations from i386/pc.h into input/i8042.hPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc) Message-Id: <20180308223946.26784-4-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/dma/i8257: Rename DMA_init() to i8257_dma_init()Philippe Mathieu-Daudé
- Move the header from hw/isa/ to hw/dma/ - Remove the old i386/pc dependency - use a bool type for the high_page_enable argument Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-3-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa: Move parallel_hds_isa_init() to hw/char/parallel-isa.cPhilippe Mathieu-Daudé
Again... (after 07dc788054d7 and 9157eee1b1c0). We now extract the ISA bus specific helpers. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-2-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-09MAINTAINERS: Add entries for SD (SDHCI, SDBus, SDCard)Philippe Mathieu-Daudé
After spending months studying all the different SD Specifications from the SD Association, voluntarily add myself as maintainer for the SD code. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180309153654.13518-9-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-07RISC-V MaintainersMichael Clark
Add Michael Clark, Palmer Dabbelt, Sagar Karandikar and Bastian Koppelmann as RISC-V Maintainers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-01Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180301' into staging target-arm queue: * update MAINTAINERS for Alistair's new email address * add Arm v8.2 FP16 arithmetic extension for linux-user * implement display connector emulation for vexpress board * xilinx_spips: Enable only two slaves when reading/writing with stripe * xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands * hw: register: Run post_write hook on reset # gpg: Signature made Thu 01 Mar 2018 11:22:46 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180301: (42 commits) MAINTAINERS: Update my email address linux-user: Report AArch64 FP16 support via hwcap bits target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPU arm/translate-a64: add all single op FP16 to handle_fp_1src_half arm/translate-a64: implement simd_scalar_three_reg_same_fp16 arm/translate-a64: add all FP16 ops in simd_scalar_pairwise arm/translate-a64: add FP16 FMOV to simd_mod_imm arm/translate-a64: add FP16 FRSQRTE to simd_two_reg_misc_fp16 arm/helper.c: re-factor rsqrte and add rsqrte_f16 arm/translate-a64: add FP16 FSQRT to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FRCPX to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FRECPE arm/helper.c: re-factor recpe and add recepe_f16 arm/translate-a64: add FP16 FNEG/FABS to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 SCVTF/UCVFT to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FCMxx (zero) to simd_two_reg_misc_fp16 arm/translate-a64: add FCVTxx to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FPRINTx to simd_two_reg_misc_fp16 arm/translate-a64: initial decode for simd_two_reg_misc_fp16 arm/translate-a64: add FP16 x2 ops for simd_indexed ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01MAINTAINERS: Update my email addressAlistair Francis
I am leaving Xilinx, so to avoid having an email address that bounces update my maintainer address to point to my personal email address. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 7bb690382e3370aa1c1e047a84e36603c787ec0e.1519749987.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanberger/tags/pull-tpm-2018-02-21-2' into staging Merge tpm 2018/02/21 v2 # gpg: Signature made Tue 27 Feb 2018 13:50:28 GMT # gpg: using RSA key 75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2018-02-21-2: tests: add test for TPM TIS device tests: Move common TPM test code into tpm-emu.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-23maintainers: Add myself as a OpenBSD maintainerBrad Smith
Add myself as an OpenBSD maintainer and add OpenBSD as maintained. Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Kamil Rytarowski <n54@gmx.com> Message-id: 20180216164620.GA53727@humpty.home.comstyle.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-21tests: add test for TPM TIS deviceStefan Berger
Move the TPM TIS related register and flag #defines into include/hw/acpi/tpm.h for access by the test case. Write a test case that covers the TIS functionality. Add the tests cases to the MAINTAINERS file. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-02-19MAINTAINERS: add entry for hw/rdmaMarcel Apfelbaum
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
2018-02-10MAINTAINERS: Add qemu-binfmt-conf.sh scriptThomas Huth
qemu-binfmt-conf.sh is used for the Linux usermode emulation, so let's add this file to that section in the MAINTAINERS file. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Laurent Vivier <laurent@vivier.eu>
2018-02-09MAINTAINERS: add David as additional tcg/s390 maintainerCornelia Huck
Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09MAINTAINERS: reorganize s390-ccw bios maintainershipCornelia Huck
Split it out from the s390-ccw-virtio machine, add Thomas as a maintainer in addition to Christian. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09MAINTAINERS: add myself as overall s390x maintainerCornelia Huck
All your mainframes are belong to me. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-08block: Add VFIO based NVMe driverFam Zheng
This is a new protocol driver that exclusively opens a host NVMe controller through VFIO. It achieves better latency than linux-aio by completely bypassing host kernel vfs/block layer. $rw-$bs-$iodepth linux-aio nvme:// ---------------------------------------- randread-4k-1 10.5k 21.6k randread-512k-1 745 1591 randwrite-4k-1 30.7k 37.0k randwrite-512k-1 1945 1980 (unit: IOPS) The driver also integrates with the polling mechanism of iothread. This patch is co-authored by Paolo and me. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20180116060901.17413-4-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-05Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanberger/tags/pull-tpm-2018-02-03-1' into staging Merge tpm 2018/02/03 v1 # gpg: Signature made Sat 03 Feb 2018 14:02:35 GMT # gpg: using RSA key 75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2018-02-03-1: tpm: tis: move one-line function into caller MAINTAINERS: add pointer to tpm-next repository tpm: wrap stX_be_p in tpm_cmd_set_XYZ functions tpm: Split off tpm_crb_reset function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-03MAINTAINERS: add pointer to tpm-next repositoryStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-02-02Merge remote-tracking branch 'remotes/cminyard/tags/for-release-20180201' ↵Peter Maydell
into staging Lots of litte miscellaneous fixes for the IPMI code, plus add me as the IPMI maintainer. # gpg: Signature made Thu 01 Feb 2018 18:44:55 GMT # gpg: using RSA key 61F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" # gpg: aka "Corey Minyard <minyard@acm.org>" # gpg: aka "Corey Minyard <corey@minyard.net>" # gpg: aka "Corey Minyard <minyard@mvista.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/for-release-20180201: ipmi: Allow BMC device properties to be set ipmi: disable IRQ and ATN on an external disconnect ipmi: Fix macro issues ipmi: Add the platform event message command ipmi: Don't set the timestamp on add events that don't have it ipmi: Fix SEL get/set time commands Add maintainer for the IPMI code Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-31hw/hppa: Add MAINTAINERS entryRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30Add maintainer for the IPMI codeCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-01-29MAINTAINERS: update Dmitry Fleytman emailPhilippe Mathieu-Daudé
gently asked by his automatic reply :) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-18MAINTAINERS: Add myself as maintainer to X86 machinesMarcel Apfelbaum
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-11Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180111' ↵Peter Maydell
into staging ppc patch queue 2018-01-11 This pull request supersedes ppc-for-2.12-20180108 and several before it. The earlier pull request included a patch which exposed a bug in the ARM TCG backend. I've pulled that out and will repost once the ARM bug is fixed (a patch has been posted by Richard Henderson). Higlights from this series: * SLOF update * Several new devices for embedded platforms * Fix to correctly set compatiblity mode for hotplugged CPUs * dtc compile fix for older MacOS versions # gpg: Signature made Thu 11 Jan 2018 04:58:11 GMT # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.12-20180111: spapr: Correct compatibility mode setting for hotplugged CPUs hw/ppc: Remove the deprecated spapr-pci-vfio-host-bridge device Update dtc to fix compilation problem on Mac OS 10.6 target/ppc: more use of the PPC_*() macros ppc/pnv: change powernv_ prefix to pnv_ for overall naming consistency hw/ide: Emulate SiI3112 SATA controller spapr_pci: use warn_report() ppc4xx_i2c: Implement basic I2C functions sm501: Add some more unimplemented registers sm501: Add panel hardware cursor registers also to read function pseries: Update SLOF firmware image to qemu-slof-20171214 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-10hw/ide: Emulate SiI3112 SATA controllerBALATON Zoltan
This is a common generic PCI SATA controller that is also used in PCs but more importantly guests running on the Sam460ex board prefer this card and have a driver for it (unlike for other SATA controllers already emulated). Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: John Snow <jsnow@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-09Merge remote-tracking branch 'remotes/xtensa/tags/20180109-xtensa' into stagingPeter Maydell
target/xtensa updates: - add libisa to the xtensa target; - change xtensa instruction translator to use it; - switch existing xtensa cores to use it; - add support for a number of instructions: salt/saltu, const16, GPIO32 group, debug mode and MMU-related; - add disassembler for Xtensa. # gpg: Signature made Tue 09 Jan 2018 18:11:02 GMT # gpg: using RSA key 0x51F9CC91F83FA044 # gpg: Good signature from "Max Filippov <filippov@cadence.com>" # gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" # Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044 * remotes/xtensa/tags/20180109-xtensa: target/xtensa: implement disassembler target/xtensa: implement const16 target/xtensa: implement GPIO32 target/xtensa: implement salt/saltu target/xtensa: add internal/noop SRs and opcodes target/xtensa: drop DisasContext::litbase target/xtensa: tests: fix memctl SR test target/xtensa: use libisa for instruction decoding target/xtensa: switch fsf to libisa target/xtensa: switch dc233c to libisa target/xtensa: switch dc232b to libisa target/xtensa: update import_core.sh script for libisa target/xtensa: extract FPU2000 opcode translators target/xtensa: extract core opcode translators target/xtensa: import libisa source target/xtensa: pass actual frame size to the entry helper Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-09target/xtensa: implement disassemblerMax Filippov
Add disas/xtensa.c and use libisa for instruction decoding/opcode name lookup. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 07:46:21 +0000