aboutsummaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)Author
2021-03-24semihosting: move semihosting tests to multiarchAlex Bennée
It may be arm-compat-semihosting but more than one architecture uses it so lets move the tests into the multiarch area. We gate it on the feature and split the semicall.h header between the arches. Also clean-up a bit of the Makefile messing about to one common set of runners. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210323165308.15244-6-alex.bennee@linaro.org>
2021-03-23exec: Build page-vary-common.c with -fno-ltoRichard Henderson
In bbc17caf81f, we used an alias attribute to allow target_page to be declared const, and yet be initialized late. This fails when using LTO with several versions of gcc. The compiler looks through the alias and decides that the const variable is statically initialized to zero, then propagates that zero to many uses of the variable. This can be avoided by compiling one object file with -fno-lto. In this way, any initializer cannot be seen, and the constant propagation does not occur. Since we are certain to have this separate compilation unit, we can drop the alias attribute as well. We simply have differing declarations for target_page in different compilation units. Drop the use of init_target_page, and drop the configure detection for CONFIG_ATTRIBUTE_ALIAS. In order to change the compilation flags for a file with meson, we must use a static_library. This runs into specific_ss, where we would need to create many static_library instances. Fix this by splitting page-vary.c: the page-vary-common.c part is compiled once as a static_library, while the page-vary.c part is left in specific_ss in order to handle the target-specific value of TARGET_PAGE_BITS_MIN. Reported-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210321211534.2101231-1-richard.henderson@linaro.org> [PMD: Fix typo in subject, split original patch in 3] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Gavin Shan <gshan@redhat.com> Message-Id: <20210322112427.4045204-4-f4bug@amsat.org> [rth: Update MAINTAINERS] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-03-23exec: Rename exec-vary.c as page-vary.cRichard Henderson
exec-vary.c is about variable page size handling, rename it page-vary.c. Currently this file is target specific (built once for each target), comment this. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210322112427.4045204-2-f4bug@amsat.org> [rth: Update MAINTAINERS] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-03-22net/eth: Read ip6_ext_hdr_routing buffer before accessing itPhilippe Mathieu-Daudé
We can't know the caller read enough data in the memory pointed by ext_hdr to cast it as a ip6_ext_hdr_routing. Declare rt_hdr on the stack and fill it again from the iovec. Since we already checked there is enough data in the iovec buffer, simply add an assert() call to consume the bytes_read variable. This fix a 2 bytes buffer overrun in eth_parse_ipv6_hdr() reported by QEMU fuzzer: $ cat << EOF | ./qemu-system-i386 -M pc-q35-5.0 \ -accel qtest -monitor none \ -serial none -nographic -qtest stdio outl 0xcf8 0x80001010 outl 0xcfc 0xe1020000 outl 0xcf8 0x80001004 outw 0xcfc 0x7 write 0x25 0x1 0x86 write 0x26 0x1 0xdd write 0x4f 0x1 0x2b write 0xe1020030 0x4 0x190002e1 write 0xe102003a 0x2 0x0807 write 0xe1020048 0x4 0x12077cdd write 0xe1020400 0x4 0xba077cdd write 0xe1020420 0x4 0x190002e1 write 0xe1020428 0x4 0x3509d807 write 0xe1020438 0x1 0xe2 EOF ================================================================= ==2859770==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7ffdef904902 at pc 0x561ceefa78de bp 0x7ffdef904820 sp 0x7ffdef904818 READ of size 1 at 0x7ffdef904902 thread T0 #0 0x561ceefa78dd in _eth_get_rss_ex_dst_addr net/eth.c:410:17 #1 0x561ceefa41fb in eth_parse_ipv6_hdr net/eth.c:532:17 #2 0x561cef7de639 in net_tx_pkt_parse_headers hw/net/net_tx_pkt.c:228:14 #3 0x561cef7dbef4 in net_tx_pkt_parse hw/net/net_tx_pkt.c:273:9 #4 0x561ceec29f22 in e1000e_process_tx_desc hw/net/e1000e_core.c:730:29 #5 0x561ceec28eac in e1000e_start_xmit hw/net/e1000e_core.c:927:9 #6 0x561ceec1baab in e1000e_set_tdt hw/net/e1000e_core.c:2444:9 #7 0x561ceebf300e in e1000e_core_write hw/net/e1000e_core.c:3256:9 #8 0x561cef3cd4cd in e1000e_mmio_write hw/net/e1000e.c:110:5 Address 0x7ffdef904902 is located in stack of thread T0 at offset 34 in frame #0 0x561ceefa320f in eth_parse_ipv6_hdr net/eth.c:486 This frame has 1 object(s): [32, 34) 'ext_hdr' (line 487) <== Memory access at offset 34 overflows this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork (longjmp and C++ exceptions *are* supported) SUMMARY: AddressSanitizer: stack-buffer-overflow net/eth.c:410:17 in _eth_get_rss_ex_dst_addr Shadow bytes around the buggy address: 0x10003df188d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x10003df188e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x10003df188f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x10003df18900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x10003df18910: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 =>0x10003df18920:[02]f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 0x10003df18930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x10003df18940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x10003df18950: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x10003df18960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x10003df18970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Stack left redzone: f1 Stack right redzone: f3 ==2859770==ABORTING Add the corresponding qtest case with the fuzzer reproducer. FWIW GCC 11 similarly reported: net/eth.c: In function 'eth_parse_ipv6_hdr': net/eth.c:410:15: error: array subscript 'struct ip6_ext_hdr_routing[0]' is partly outside array bounds of 'struct ip6_ext_hdr[1]' [-Werror=array-bounds] 410 | if ((rthdr->rtype == 2) && (rthdr->segleft == 1)) { | ~~~~~^~~~~~~ net/eth.c:485:24: note: while referencing 'ext_hdr' 485 | struct ip6_ext_hdr ext_hdr; | ^~~~~~~ net/eth.c:410:38: error: array subscript 'struct ip6_ext_hdr_routing[0]' is partly outside array bounds of 'struct ip6_ext_hdr[1]' [-Werror=array-bounds] 410 | if ((rthdr->rtype == 2) && (rthdr->segleft == 1)) { | ~~~~~^~~~~~~~~ net/eth.c:485:24: note: while referencing 'ext_hdr' 485 | struct ip6_ext_hdr ext_hdr; | ^~~~~~~ Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/qemu/+bug/1879531 Reported-by: Alexander Bulekov <alxndr@bu.edu> Reported-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com> Fixes: eb700029c78 ("net_pkt: Extend packet abstraction as required by e1000e functionality") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-17Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * add --enable/--disable-libgio to configure (Denis) * small fixes (Pavel, myself) * fuzzing update (Alexander) # gpg: Signature made Tue 16 Mar 2021 18:30:38 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: qemu-timer: allow freeing a NULL timer hw/i8254: fix vmstate load scsi: fix sense code for EREMOTEIO Revert "accel: kvm: Add aligment assert for kvm_log_clear_one_slot" configure: add option to explicitly enable/disable libgio fuzz: move some DMA hooks fuzz: configure a sparse-mem device, by default memory: add a sparse memory device for fuzzing fuzz: add a am53c974 generic-fuzzer config fuzz: add instructions for building reproducers fuzz: add a script to build reproducers fuzz: don't leave orphan llvm-symbolizers around fuzz: fix the pro100 generic-fuzzer config MAINTAINERS: Cover fuzzer reproducer tests within 'Device Fuzzing' tests/qtest: Only run fuzz-virtio-scsi when virtio-scsi is available tests/qtest: Only run fuzz-megasas-test if megasas device is available Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20210316.0' ↵Peter Maydell
into staging VFIO update 2021-03-16 * Fix "listerner" typo (Zenghui Yu) * Inclusive language and MAINTAINERS update (Philippe Mathieu-Daudé) * vIOMMU unmap notifier fixes (Eric Auger) * Migration fixes and optimizations (Shenming Lu) * Use host page size for dirty bitmap (Kunkun Jiang) * Use log_global_start/stop to switch dirty tracking (Keqian Zhu) # gpg: Signature made Tue 16 Mar 2021 16:59:10 GMT # gpg: using RSA key 239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full] # gpg: aka "Alex Williamson <alex@shazbot.org>" [full] # gpg: aka "Alex Williamson <alwillia@redhat.com>" [full] # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full] # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-update-20210316.0: vfio/migrate: Move switch of dirty tracking into vfio_memory_listener vfio: Support host translation granule size vfio: Avoid disabling and enabling vectors repeatedly in VFIO migration vfio: Set the priority of the VFIO VM state change handler explicitly vfio: Move the saving of the config space to the right place in VFIO migration spapr_iommu: Fix vhost integration regression vfio: Do not register any IOMMU_NOTIFIER_DEVIOTLB_UNMAP notifier MAINTAINERS: Cover docs/igd-assign.txt in VFIO section hw/vfio/pci-quirks: Replace the word 'blacklist' vfio: Fix vfio_listener_log_sync function name typo Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' ↵Peter Maydell
into staging m68k pull request 20210315 Add m68k virt machine # gpg: Signature made Mon 15 Mar 2021 20:41:51 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-for-6.0-pull-request: m68k: add Virtual M68k Machine m68k: add a system controller m68k: add an interrupt controller hw/intc: add goldfish-pic hw/char: add goldfish-tty Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16memory: add a sparse memory device for fuzzingAlexander Bulekov
For testing, it can be useful to simulate an enormous amount of memory (e.g. 2^64 RAM). This adds an MMIO device that acts as sparse memory. When something writes a nonzero value to a sparse-mem address, we allocate a block of memory. For now, since the only user of this device is the fuzzer, we do not track and free zeroed blocks. The device has a very low priority (so it can be mapped beneath actual RAM, and virtual device MMIO regions). Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16MAINTAINERS: Cover fuzzer reproducer tests within 'Device Fuzzing'Philippe Mathieu-Daudé
When we started to commit the fuzzer QTest reproducers to fuzz-test.c in commit d8dd1095019 ("qtest: add fuzz test case"), we forgot to add the corresponding MAINTAINERS entry. Do it now. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16tests/qtest: Only run fuzz-virtio-scsi when virtio-scsi is availablePhilippe Mathieu-Daudé
This test fails when QEMU is built without the virtio-scsi device, restrict it to its availability. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16tests/qtest: Only run fuzz-megasas-test if megasas device is availablePhilippe Mathieu-Daudé
This test fails when QEMU is built without the megasas device, restrict it to its availability. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16MAINTAINERS: Cover docs/igd-assign.txt in VFIO sectionPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210202155611.998424-1-philmd@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-15m68k: add Virtual M68k MachineLaurent Vivier
The machine is based on Goldfish interfaces defined by Google for Android simulator. It uses Goldfish-rtc (timer and RTC), Goldfish-pic (PIC) and Goldfish-tty (for serial port and early tty). The machine is created with 128 virtio-mmio bus, and they can be used to use serial console, GPU, disk, NIC, HID, ... Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-6-laurent@vivier.eu>
2021-03-15hw/usb: Extract VT82C686 UHCI PCI function into a new unitPhilippe Mathieu-Daudé
Extract the VT82C686 PCI UHCI function into a new unit so it is only build when the VT82C686 south bridge is selected. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210309190802.830969-4-f4bug@amsat.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-14Merge remote-tracking branch ↵Peter Maydell
'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging * Move unit and bench tests into separate directories * Clean-up and improve gitlab-ci jobs * Drop the non-working "check-speed" makefile target * Minor documentation updates # gpg: Signature made Fri 12 Mar 2021 17:18:45 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2021-03-12: README: Add Documentation blurb MAINTAINERS: Merge the Gitlab-CI section into the generic CI section tests: remove "make check-speed" in favor of "make bench" gitlab-ci.yml: Merge check-crypto-old jobs into the build-crypto-old jobs gitlab-ci.yml: Merge one of the coroutine jobs with the tcg-disabled job gitlab-ci.yml: Add some missing dependencies to the jobs gitlab-ci.yml: Move build-tools-and-docs-debian to a better place tests: Move benchmarks into a separate folder tests: Move unit tests into a separate directory Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12MAINTAINERS: Merge the Gitlab-CI section into the generic CI sectionThomas Huth
The status of the gitlab-CI files is currently somewhat confusing, and it is often not quite clear whether a patch should go via my tree or via the testing tree of Alex. That situation has grown historically... Initially, I was the only one using the gitlab-CI, just for my private repository there. But in the course of time, the gitlab-CI switched to use the containers from tests/docker/ (which is not part of the gitlab-CI section in the MAINTAINERS file), and QEMU now even switched to gitlab.com completely for the repository and will soon use it as its gating CI, too, so it makes way more sense if the gitlab-ci.yml files belong to the people who are owning the qemu-project on gitlab.com and take care of the gitlab CI there. Thus let's merge the gitlab-ci section into the common "test and build automation" section. And while we're at it, I'm also removing the line with Fam there for now, since he was hardly active during the last years in this area anymore. If he ever gets more time for this part again in the future, we surely can add the line back again. I'm also removing the Patchew URL from this section now since Patchew's files are not tracked in the main QEMU repo and it is also not maintained by Alex, Philippe and myself. The maintainers of Patchew are still listed more accurately in the wiki on https://wiki.qemu.org/AdminContacts & https://wiki.qemu.org/Testing/CI/Patchew instead. Now to avoid that Alex is listed here in this section alone, Philippe and I agreed to help as backup maintainers here, too. And Willian volunteered to be an additional reviewer. Message-Id: <20210309112356.737266-1-thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Fam Zheng <fam@euphon.net> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-12tests: Move benchmarks into a separate folderThomas Huth
Make it clear that these files are related to benchmarks by moving them into a new folder called "bench". Message-Id: <20210312092238.79509-1-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-12tests: Move unit tests into a separate directoryThomas Huth
The main tests directory still looks very crowded, and it's not clear which files are part of a unit tests and which belong to a different test subsystem. Let's clean up the mess and move the unit tests to a separate directory. Message-Id: <20210310063314.1049838-1-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-11Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging Testing, guest-loader and other misc tweaks - add warning text to quickstart example - add CFI tests to CI - use --arch-only for docker pre-requisites - fix .editorconfig for emacs - add guest-loader for Xen-like hypervisor testing - move generic-loader docs into manual proper - move semihosting out of hw/ # gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2: semihosting: Move hw/semihosting/ -> semihosting/ semihosting: Move include/hw/semihosting/ -> include/semihosting/ tests/avocado: add boot_xen tests docs: add some documentation for the guest-loader docs: move generic-loader documentation into the main manual hw/core: implement a guest-loader to support static hypervisor guests device_tree: add qemu_fdt_setprop_string_array helper hw/riscv: migrate fdt field to generic MachineState hw/board: promote fdt from ARM VirtMachineState to MachineState .editorconfig: update the automatic mode setting for Emacs tests/docker: Use --arch-only when building Debian cross image gitlab-ci.yml: Add jobs to test CFI flags gitlab-ci.yml: Allow custom # of parallel linkers tests/docker: add a test-tcg for building then running check-tcg docs/system: add a gentle prompt for the complexity to come Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into ↵Peter Maydell
staging nbd patches for 2021-03-09 - Add Vladimir as NBD co-maintainer - Fix reporting of holes in NBD_CMD_BLOCK_STATUS - Improve command-line parsing accuracy of large numbers (anything going through qemu_strtosz), including the deprecation of hex+suffix - Improve some error reporting in the block layer # gpg: Signature made Tue 09 Mar 2021 15:38:10 GMT # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2021-03-09: block/qcow2: refactor qcow2_update_options_prepare error paths block/qed: bdrv_qed_do_open: deal with errp block/qcow2: simplify qcow2_co_invalidate_cache() block/qcow2: read_cache_sizes: return status value block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface block/qcow2: qcow2_get_specific_info(): drop error propagation blockjob: return status from block_job_set_speed() block/mirror: drop extra error propagation in commit_active_start() block: drop extra error propagation for bdrv_set_backing_hd blockdev: fix drive_backup_prepare() missed error block: check return value of bdrv_open_child and drop error propagation utils: Deprecate hex-with-suffix sizes utils: Improve qemu_strtosz() to have 64 bits of precision utils: Enhance testsuite for do_strtosz() nbd: server: Report holes for raw images MAINTAINERS: add Vladimir as co-maintainer of NBD Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10Merge remote-tracking branch ↵Peter Maydell
'remotes/thuth-gitlab/tags/pull-request-2021-03-09' into staging * Add some missing gitlab-CI job dependencies * Re-enable "make check SPEED=slow" * Improve the gitlab-pipeline-status script * Clean up inclusing of qtest.h headers * Improve libqos/qgraph documentation * Fix downloading problem in the acceptance tests * Remove deprecated target tilegx * Add new bsd-user maintainers # gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2021-03-09: bsd-user: Add new maintainers Remove deprecated target tilegx Acceptance Tests: restore filtering of tests by target arch Acceptance Tests: restore downloading of VM images docs/devel/qgraph: improve qgraph documentation libqos/qgraph: format qgraph comments for sphinx documentation scripts/ci/gitlab-pipeline-status: give more info when pipeline not found scripts/ci/gitlab-pipeline-status: give more information on failures scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET meson: Re-enable the possibility to run "make check SPEED=slow" docker: OpenSBI build job depends on OpenSBI container docker: EDK2 build job depends on EDK2 container docker: Alpine build job depends on Alpine container qtest: delete superfluous inclusions of qtest.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10semihosting: Move hw/semihosting/ -> semihosting/Philippe Mathieu-Daudé
With the exception of hw/core/, the hw/ directory only contains device models used in system emulation. Semihosting is also used by user emulation. As a generic feature, move it out of hw/ directory. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-3-f4bug@amsat.org> Message-Id: <20210305135451.15427-3-alex.bennee@linaro.org>
2021-03-10semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé
We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
2021-03-10tests/avocado: add boot_xen testsAlex Bennée
These tests make sure we can boot the Xen hypervisor with a Dom0 kernel using the guest-loader. We currently have to use a kernel I built myself because there are issues using the Debian kernel images. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20210303173642.3805-8-alex.bennee@linaro.org>
2021-03-10docs: add some documentation for the guest-loaderAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210303173642.3805-7-alex.bennee@linaro.org>
2021-03-10docs: move generic-loader documentation into the main manualAlex Bennée
We might as well surface this useful information in the manual so users can find it easily. It is a fairly simple conversion to rst with the only textual fixes being QemuOps to QemuOpts. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210303173642.3805-6-alex.bennee@linaro.org>
2021-03-10hw/core: implement a guest-loader to support static hypervisor guestsAlex Bennée
Hypervisors, especially type-1 ones, need the firmware/bootcode to put their initial guest somewhere in memory and pass the information to it via platform data. The guest-loader is modelled after the generic loader for exactly this sort of purpose: $QEMU $ARGS -kernel ~/xen.git/xen/xen \ -append "dom0_mem=1G,max:1G loglvl=all guest_loglvl=all" \ -device guest-loader,addr=0x42000000,kernel=Image,bootargs="root=/dev/sda2 ro console=hvc0 earlyprintk=xen" \ -device guest-loader,addr=0x47000000,initrd=rootfs.cpio Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210303173642.3805-5-alex.bennee@linaro.org>
2021-03-10Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210310' into staging target-arm queue: * Add new mps3-an547 board * target/arm: Restrict v7A TCG cpus to TCG accel * Implement a Xilinx CSU DMA model * hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() # gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits) hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_ hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips hw/ssi: xilinx_spips: Clean up coding convention issues hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI hw/arm: xlnx-zynqmp: Clean up coding convention issues hw/dma: Implement a Xilinx CSU DMA model target/arm: Restrict v7A TCG cpus to TCG accel tests/qtest/sse-timer-test: Test counter scaling changes tests/qtest/sse-timer-test: Test the system timer tests/qtest/sse-timer-test: Add simple test of the SSE counter docs/system/arm/mps2.rst: Document the new mps3-an547 board hw/arm/mps2-tz: Add new mps3-an547 board hw/arm/mps2-tz: Make initsvtor0 setting board-specific hw/arm/mps2-tz: Support running APB peripherals on different clock hw/misc/mps2-scc: Implement changes for AN547 hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate hw/arm/mps2-tz: Make UART overflow IRQ board-specific hw/arm/armsse: Add SSE-300 support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-09Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - qemu-storage-daemon: add --pidfile option - qemu-storage-daemon: CLI error messages include the option name now - vhost-user-blk export: Misc fixes - docs: Improvements for qemu-storage-daemon documentation - parallels: load bitmap extension - backup-top: Don't crash on post-finalize accesses - Improve error messages related to node-name options - iotests improvements # gpg: Signature made Mon 08 Mar 2021 17:01:41 GMT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (30 commits) blockdev: Clarify error messages pertaining to 'node-name' block: Clarify error messages pertaining to 'node-name' docs: qsd: Explain --export nbd,name=... default MAINTAINERS: update parallels block driver iotests: add parallels-read-bitmap test iotests.py: add unarchive_sample_image() helper parallels: support bitmap extension for read-only mode block/parallels: BDRVParallelsState: add cluster_size field parallels.txt: fix bitmap L1 table description qcow2-bitmap: make bytes_covered_by_bitmap_cluster() public block/export: port virtio-blk read/write range check block/export: port virtio-blk discard/write zeroes input validation block/export: fix vhost-user-blk export sector number calculation block/export: use VIRTIO_BLK_SECTOR_BITS block/export: fix blk_size double byteswap libqtest: add qtest_remove_abrt_handler() libqtest: add qtest_kill_qemu() libqtest: add qtest_socket_server() vhost-user-blk: fix blkcfg->num_queues endianness docs: replace insecure /tmp examples in qsd docs ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-09MAINTAINERS: Fix the location of tools manualsWainer dos Santos Moschetta
The qemu-img.rst, qemu-nbd.rst, virtfs-proxy-helper.rst, qemu-trace-stap.rst, and virtiofsd.rst manuals were moved to docs/tools, so this update MAINTAINERS accordingly. Fixes: a08b4a9fe6c ("docs: Move tools documentation to tools manual") Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210204135425.1380280-1-wainersm@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09bsd-user: Add new maintainersWarner Losh
The FreeBSD project has a number of enhancements to bsd-user. These changes have evolved over the past 10 year, and aren't currently updated to the latest version of qemu due to fluxuations in staffing causing us to fall behind in the past. We're working on porting all the changes forward and contributing all the changes back to qemu. Add myself as maintainer and Kyle Evans as a reviewer for changes. In addition, add a pointer to our github repo in the interim while this work is ongoing. Signed-off-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210308224023.75187-1-imp@bsdimp.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-09libqos/qgraph: format qgraph comments for sphinx documentationEmanuele Giuseppe Esposito
Change documentation style and fix minor typos in tests/qtest/libqos/qgraph.h to automatically generate sphinx documentation in docs/devel/qgraph.rst The mechanism explanation that once was in qgraph.h is now moved to qgraph.rst There is no functional change intended. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210308073240.6363-1-eesposit@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-08MAINTAINERS: add Vladimir as co-maintainer of NBDVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210304103503.21008-1-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-03-08tests/qtest/sse-timer-test: Add simple test of the SSE counterPeter Maydell
Add a simple qtest to exercise the new system counter device in the SSE-300. We'll add tests of the system timer device here too, so this includes scaffolding (register definitions, etc) for those. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210219144617.4782-45-peter.maydell@linaro.org
2021-03-08hw/misc/sse-cpu-pwrctrl: Implement SSE-300 CPU<N>_PWRCTRL register blockPeter Maydell
The SSE-300 has a new register block CPU<N>_PWRCTRL. There is one instance of this per CPU in the system (so just one for the SSE-300), and as well as the usual CIDR/PIDR ID registers it has just one register, CPUPWRCFG. This register allows the guest to configure behaviour of the system in power-down and deep-sleep states. Since QEMU does not model those, we make the register a dummy reads-as-written implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-21-peter.maydell@linaro.org
2021-03-08hw/timer/sse-timer: Model the SSE Subsystem System TimerPeter Maydell
The SSE-300 includes some timers which are a different kind to those in the SSE-200. Model them. These timers are documented in the SSE-123 Example Subsystem Technical Reference Manual: https://developer.arm.com/documentation/101370/latest/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-13-peter.maydell@linaro.org
2021-03-08hw/timer/sse-counter: Model the SSE Subsystem System CounterPeter Maydell
The SSE-300 includes a counter module; implement a model of it. This counter is documented in the SSE-123 Example Subsystem Technical Reference Manual: https://developer.arm.com/documentation/101370/latest/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-12-peter.maydell@linaro.org
2021-03-08MAINTAINERS: update parallels block driverVladimir Sementsov-Ogievskiy
Add new parallels-ext.c and myself as co-maintainer. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210304095151.19358-1-vsementsov@virtuozzo.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-03-06hw/pci-host: Introduce SH_PCI Kconfig entryPhilippe Mathieu-Daudé
We want to be able to use the 'SH4' config for architecture specific features. Add more fine-grained selection by adding a CONFIG_SH_PCI selector for the SH4 PCI controller. Move the file with the other PCI host devices in hw/pci-host and add its missing MAINTAINERS entries. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210222141514.2646278-8-f4bug@amsat.org>
2021-03-06hw/block: Introduce TC58128 eeprom Kconfig entryPhilippe Mathieu-Daudé
Add more fine-grained selection by adding a CONFIG_TC58128 selector for the TC58128 eeprom. As this device is only used by the Shix machine, add an entry to the proper section in MAINTAINERS. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210222141514.2646278-7-f4bug@amsat.org>
2021-03-06hw/timer: Introduce SH_TIMER Kconfig entryPhilippe Mathieu-Daudé
We want to be able to use the 'SH4' config for architecture specific features. Add more fine-grained selection by adding a CONFIG_SH_TIMER selector for the SH4 timer control unit. Add the missing MAINTAINERS entries. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210222141514.2646278-6-f4bug@amsat.org>
2021-03-06hw/char: Introduce SH_SCI Kconfig entryPhilippe Mathieu-Daudé
We want to be able to use the 'SH4' config for architecture specific features. Add more fine-grained selection by adding a CONFIG_SH_SCI selector for the SH4 serial controller. Add the missing MAINTAINERS entries. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210222141514.2646278-5-f4bug@amsat.org>
2021-03-04MAINTAINERS: Add a SiFive machine sectionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Bin Meng <bin.meng@windriver.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 6bc077e5ae4a9512c8adf81ae194718f2f17c402.1612836645.git.alistair.francis@wdc.com
2021-02-21Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-20210221' into ↵Peter Maydell
staging MIPS patches queue - Drop redundant struct MemmapEntry (Bin) - Fix for Coverity CID 1438965 and 1438967 (Jiaxun) - Add MIPS bootloader API (Jiaxun) - Use MIPS bootloader API on fuloong2e and boston machines (Jiaxun) - Add PMON test for Loongson-3A1000 CPU (Jiaxun) - Convert to translator API (Philippe) - MMU cleanups (Philippe) - Promote 128-bit multimedia registers as global ones (Philippe) - Various cleanups/fixes on the VT82C686B southbridge (Zoltan) # gpg: Signature made Sun 21 Feb 2021 18:43:57 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/mips-20210221: (43 commits) vt82c686: Fix superio_cfg_{read,write}() functions vt82c686: Log superio_cfg unimplemented accesses vt82c686: Simplify by returning earlier vt82c686: Reduce indentation by returning early vt82c686: Remove index field of SuperIOConfig vt82c686: Move creation of ISA devices to the ISA bridge vt82c686: Simplify vt82c686b_realize() vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on it vt82c686: Set user_creatable=false for VT82C686B_PM vt82c686: Fix up power management io base and config vt82c686: Correctly reset all registers to default values on reset vt82c686: Correct vt82c686-pm I/O size vt82c686: Make vt82c686-pm an I/O tracing region vt82c686: Fix SMBus IO base and configuration registers vt82c686: Reorganise code vt82c686: Move superio memory region to SuperIOConfig struct target/mips: Use GPR move functions in gen_HILO1_tx79() target/mips: Introduce gen_load_gpr_hi() / gen_store_gpr_hi() helpers target/mips: Rename 128-bit upper halve GPR registers target/mips: Promote 128-bit multimedia registers as global ones ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-21tests/acceptance: Test PMON with Loongson-3A1000 CPUJiaxun Yang
Test booting of PMON bootloader on loongson3-virt platform. $ (venv) AVOCADO_ALLOW_UNTRUSTED_CODE=1 \ avocado --show=app,console \ run -t machine:loongson3-virt tests/acceptance Fetching asset from tests/acceptance/machine_mips_loongson3v.py:MipsLoongson3v.test_pmon_serial_console JOB ID : 8e202b3727847c9104d0d3d6546ed225d35f6706 JOB LOG : /home/flygoat/avocado/job-results/job-2021-01-12T10.02-8e202b3/job.log (1/1) tests/acceptance/machine_mips_loongson3v.py:MipsLoongson3v.test_pmon_serial_console: console: PMON2000 MIPS Initializing. Standby... console: 00000000Jump to 9fc console: Init Memory done. console: The uncache data is: console: 00000000: 5555555555555555 console: 00000008: aaaaaaaaaaaaaaaa console: 00000010: 3333333333333333 console: 00000018: cccccccccccccccc console: 00000020: 7777777777777777 console: 00000028: 8888888888888888 console: 00000030: 1111111111111111 console: 00000038: eeeeeeeeeeeeeeee console: The cached data is: console: 00000000: 5555555555555555 console: 00000008: aaaaaaaaaaaaaaaa console: 00000010: 3333333333333333 console: 00000018: cccccccccccccccc console: 00000020: 7777777777777777 console: 00000028: 8888888888888888 console: 00000030: 1111111111111111 console: 00000038: eeeeeeeeeeeeeeee console: Copy PMON to execute location... console: start = 0x8f900000 console: s0 = 0x30300000 console: _edata = 0x8f989010 console: _end = 0x8f98a028copy text section done. console: Copy PMON to execute location done. console: sp=8f8fc000 console: Uncompressing Bios............................................................................OK,Booting Bios console: FREQ console: DONE console: DEVI console: ENVI console: MAPV console: NVRAM@8f7ff898 console: STDV console: 80100000: memory between 8f7ff400-8f800000 is already been allocated,heap is already above this point console: SBDD console: P12PCIH console: PCIH console: PCID console: setting up 1 bus console: PCI bus 0 slot 1: probe...completed console: PCI bus 0 slot 1/0: vendor/product: 0x106b/0x003f (serialbus, USB, interface: 0x10, revision: 0x00) console: PCI bus 0 slot 1/0: reg 0x10 = 0xffffff00 console: PCI bus 0 slot 2: probe...completed console: PCI bus 0 slot 2/0: vendor/product: 0x1af4/0x1000 (network, ethernet, interface: 0x00, revision: 0x00) console: PCI bus 0 slot 2/0: reg 0x10 = 0xffffffe1 console: PCI bus 0 slot 2/0: reg 0x14 = 0xfffff000 console: PCI bus 0 slot 2/0: reg 0x20 = 0xffffc00c console: PCI bus 0 slot 2/0: reg 0x30 = 0xfffc0000 console: PCI bus 0 slot 3: probe...completed console: PCI bus 0 slot 4: probe...completed console: PCI bus 0 slot 5: probe...completed console: PCI bus 0 slot 6: probe...completed console: PCI bus 0 slot 7: probe...completed console: PCI bus 0 slot 8: probe...completed console: PCI bus 0 slot 9: probe...completed console: PCI bus 0 slot 10: probe...completed console: PCI bus 0 slot 11: probe...completed console: PCI bus 0 slot 12: probe...completed console: PCI bus 0 slot 13: probe...completed console: PCI bus 0 slot 14: probe...completed console: PCI bus 0 slot 15: probe...completed console: PCI bus 0 slot 16: probe...completed console: PCI bus 0 slot 17: probe...completed console: PCI bus 0 slot 18: probe...completed console: PCI bus 0 slot 19: probe...completed console: PCI bus 0 slot 20: probe...completed console: PCI bus 0 slot 21: probe...completed console: PCI bus 0 slot 22: probe...completed console: PCI bus 0 slot 23: probe...completed console: PCI bus 0 slot 24: probe...completed console: PCI bus 0 slot 25: probe...completed console: PCI bus 0 slot 26: probe...completed console: PCI bus 0 slot 27: probe...completed console: PCI bus 0 slot 28: probe...completed console: PCI bus 0 slot 29: probe...completed console: PCI bus 0 slot 30: probe...completed console: PCI bus 0 slot 31: probe...completed console: PCIS console: PCIR console: PCIW console: PCI bus 0 slot 2/0: mem @0x40000000, reg 0x30 262144 bytes console: PCI bus 0 slot 2/0: mem @0x40040000, reg 0x20 16384 bytes console: PCI bus 0 slot 2/0: mem @0x40044000, reg 0x14 4096 bytes console: PCI bus 0 slot 1/0: mem @0x40045000, reg 0x10 256 bytes console: PCI bus 0 slot 2/0: exp @0x40000000, 262144 bytes console: PCI bus 0 slot 2/0: i/o @0x00004000, reg 0x10 32 bytes console: NETI console: RTCL console: PCID console: VGAI console: memorysize=c000000,base=8f6ff508,sysMem=8f6ef500 console: in setup_int_vect!done!VESA console: vga bios init failed, rc=-1 console: in configure console: mainbus0 (root) console: localbus0 at mainbus0 console: loopdev0 at mainbus0pcibr0 at mainbus0 console: pci0 at pcibr0 bus 0 console: ohci0 at pci0 dev 1 function 0 vendor/product: 0x106b/0x003f (serialbus, USB, interface: 0x10, revision: 0x00)usb base addr : 0xc0045000, bus_base is : 0xc0000000 console: OHCI revision: 0x00000010 console: RH: a: 0x00000203 b: 0x00000000 console: early period(0x0) console: OHCI 8c01ec00 initialized ok console: New Device 0 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 110 console: bDeviceClass =9 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: set address 1 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 110 console: bDeviceClass =9 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: idVendor =0 console: idProduct =0 console: bcdDevice =0 console: iManufacturer=0 console: iProduct =1 console: iSerialNumber=0 console: bNumConfigurations=1 console: usb_get_descriptor console: usb_get_descriptor console: get_conf_no 0 Result 25, wLength 25 console: if 0, ep 0 console: bLength=9 console: bDescriptorType=2 console: wTotalLength=19 console: bNumInterfaces=1 console: bConfigurationValue=1 console: iConfiguration=0 console: bmAttributes=40 console: MaxPower=0 console: 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 ff console: ##EP epmaxpacketin[1] = 2 console: set configuration 1 console: new device strings: Mfr=0, Product=1, SerialNumber=0 console: USB device number 1 default language ID 0x409 console: Manufacturer console: Product OHCI Root Hub console: SerialNumber console: New Device 1 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 200 console: bDeviceClass =0 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: set address 2 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 200 console: bDeviceClass =0 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: idVendor =627 console: idProduct =1 console: bcdDevice =0 console: iManufacturer=1 console: iProduct =4 console: iSerialNumber=b console: bNumConfigurations=1 console: usb_get_descriptor console: usb_get_descriptor console: get_conf_no 0 Result 34, wLength 34 console: unknown Description Type : 21 console: 09 21 11 01 00 01 22 3F 00 console: if 0, ep 0 console: bLength=9 console: bDescriptorType=2 console: wTotalLength=22 console: bNumInterfaces=1 console: bConfigurationValue=1 console: iConfiguration=8 console: bmAttributes=a0 console: MaxPower=32 console: 09 04 00 00 01 03 01 01 00 09 21 11 01 00 01 22 3f 00 07 05 81 03 08 00 0a console: ##EP epmaxpacketin[1] = 8 console: set configuration 1 console: new device strings: Mfr=1, Product=4, SerialNumber=11 console: USB device number 2 default language ID 0x409 console: Manufacturer QEMU console: Product QEMU USB Keyboard console: SerialNumber 68284-0000:00:01.0-1 console: drive at ohci0 devnum 2, Product QEMU USB Keyboard console: not configured console: New Device 2 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 200 console: bDeviceClass =0 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: set address 3 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 200 console: bDeviceClass =0 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: idVendor =627 console: idProduct =1 console: bcdDevice =0 console: iManufacturer=1 console: iProduct =3 console: iSerialNumber=a console: bNumConfigurations=1 console: usb_get_descriptor console: usb_get_descriptor console: get_conf_no 0 Result 34, wLength 34 console: unknown Description Type : 21 console: 09 21 01 00 00 01 22 4A 00 console: if 0, ep 0 console: bLength=9 console: bDescriptorType=2 console: wTotalLength=22 console: bNumInterfaces=1 console: bConfigurationValue=1 console: iConfiguration=7 console: bmAttributes=a0 console: MaxPower=32 console: 09 04 00 00 01 03 00 00 00 09 21 01 00 00 01 22 4a 00 07 05 81 03 08 00 0a console: ##EP epmaxpacketin[1] = 8 console: set configuration 1 console: new device strings: Mfr=1, Product=3, SerialNumber=10 console: USB device number 3 default language ID 0x409 console: Manufacturer QEMU console: Product QEMU USB Tablet console: SerialNumber 28754-0000:00:01.0-2 console: drive at ohci0 devnum 3, Product QEMU USB Tablet console: not configured console: drive at ohci0 devnum 1, Product OHCI Root Hub console: not configured console: vendor/product: 0x1af4/0x1000 (network, ethernet, interface: 0x00, revision: 0x00) at pci0 dev 2 function 0 not configured console: out configure console: Press <Del> to set BIOS,waiting for 3 seconds here..... console: devconfig done. console: ifinit done. console: domaininit done. console: init_proc.... console: HSTI console: SYMI console: SBDE console: [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ console: [[ [[[[[[[[[ [[[[[ [[[[ [[[[[ [[[[[ [[[[[ [[[[[ [[[[ [[[[[ [[ console: [[ [[[[[[[[ [[[[ [[[ [[[[ [[[ [[[[ [[[[ [[[[ [[[ [[[[ [[[ [[[[ [[[ [[[[ [[ console: [[ [[[[[[[[ [[[[[[ [[[ [[[[[[ [[[ [ [[[ [[[ [[[[[[[[[[[[ [[[[[[[ [[[[[[ [[[ [ [[[ [[ console: [[ [[[[[[[[ [[[[[[ [[[ [[[[[[ [[[ [[ [[ [[[ [[[ [[[[[[[ [[[[ [[[[[[ [[[ [[ [[ [[ console: [[ [[[[[[[[ [[[[[[ [[[ [[[[[[ [[[ [[[ [ [[[ [[[[[ [[[[[[[[[[ [[[ [[[[[[ [[[ [[[ [ [[ console: [[ [[[[[[[[ [[[[ [[[ [[[[ [[[ [[[[ [[[ [[[[ [[[ [[[ [[[[ [[[[ [[[ [[[[ [[ console: [[ [[[[ [[[[[ [[[[ [[[[[ [[[[ [[[[[ [[[[[[ [[[[ [[[[[ [[ console: [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[2011 Loongson][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ console: Configuration [Bonito,EL,NET,SCSI,IDE] console: Version: PMON2000 3.3 (Bonito) #0: Tue Dec 22 01:58:09 UTC 2020 commit b3ece66234adbf7d4e453f0ba4f326c099ac2a76 Author: Jiaxun Yang <jiaxun.yang@flygoat.com> Date: Tue Dec 22 09:51:10 2020 +0800 . console: Supported loaders [txt, srec, elf, bin] console: Supported filesystems [net, fat, fs, disk, iso9660, socket, tty, ram] console: This software may be redistributed under the BSD copyright. console: Copyright 2000-2002, Opsycon AB, Sweden. console: Copyright 2005, ICT CAS. console: CPU GODSON3 BogoMIPS: 1327 PASS (3.89 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 4.38 s Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210112020708.62922-1-jiaxun.yang@flygoat.com> [PMD: Set timeout to 60sec, simply test for ''CPU GODSON3 BogoMIPS'] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request trivial patches 20210220 # gpg: Signature made Sat 20 Feb 2021 12:34:21 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: MAINTAINERS: Fix default-configs/ entries target/avr/cpu: Use device_class_set_parent_realize() hw/scsi/megasas: Remove pointless parenthesis u2f-passthru: put it into the 'misc' category tpm: put some tpm devices into the correct category nvdimm: put it into the 'storage' category vmmouse: put it into the 'input' category virtio-pmem: put it into the 'storage' category MAINTAINERS: add my github tree URL Fix SPDX-License-Identifier typos hw/block/fdc: Remove the check_media_rate property hw/i386/xen: Remove dead code Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-20MAINTAINERS: Fix default-configs/ entriesPhilippe Mathieu-Daudé
Update the F: line after the Meson refactor. Fixes: 1bb4cb1c338..73362fc0b0c ("default-configs: ...") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201117114656.1222555-1-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-20MAINTAINERS: add my github tree URLChristian Schoenebeck
I already used this github URL for PRs before and will continue to use it in foreseeable future. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <E1l5rYG-0005sv-87@lizzy.crudebyte.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-20MAINTAINERS: Add Bin Meng as co-maintainer for SD/MMC cardsPhilippe Mathieu-Daudé
There is new interest in the SD/MMC device emulation, so it would be good to have more than only one maintainer / reviewer for it. Bin Meng proved by his contributions a deep understanding of the SD cards internals, so let's add him to the corresponding section in the MAINTAINERS file. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20210216132841.1121653-1-f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 04:56:14 +0000