aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-30hw/mips/mipssim: Use MMIO serial device on fake ISA I/OPhilippe Mathieu-Daudé
The 'mipssim' is not a real hardware, it is a simulator. There is an ISA MMIO space mapped at 0x1fd00000, however this is not a real ISA bus (no ISA IRQ). So can not use the TYPE_ISA_SERIAL device... Instead we have been using a plain MMIO device, but named it IO. TYPE_SERIAL_IO is a subset of TYPE_SERIAL_MM, using regshift=0 and endianness=DEVICE_LITTLE_ENDIAN. Directly use the TYPE_SERIAL_MM device, enforcing the regshift/endianness values. 'regshift' default is already '0'. 'endianness' is meaningless for 8-bit accesses. This change breaks migration back compatibility, but this is not an issue for the mipssim machine. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907011538.818996-2-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30numa: remove fixup numa_state->num_nodes to MAX_NODESIgor Mammedov
current code permits only nodeids in [0..MAX_NODES) range due to nodeid check in parse_numa_node() if (nodenr >= MAX_NODES) { error_setg(errp, "Max number of NUMA nodes reached: %" so subj fixup is not reachable, drop it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200911084410.788171-4-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30doc: Cleanup "'-mem-path' fallback to RAM" deprecation textIgor Mammedov
it was actually removed in 5.0, commit 68a86dc15c (numa: remove deprecated -mem-path fallback to anonymous RAM) clean up forgotten remnants in docs. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200911084410.788171-3-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30numa: drop support for '-numa node' (without memory specified)Igor Mammedov
it was deprecated since 4.1 commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes) Users of existing VMs, wishing to preserve the same RAM distribution, should configure it explicitly using ``-numa node,memdev`` options. Current RAM distribution can be retrieved using HMP command `info numa` and if separate memory devices (pc|nv-dimm) are present use `info memory-device` and subtract device memory from output of `info numa`. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200911084410.788171-2-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30acpi: i386: Move VMBus DSDT entry to SBJon Doron
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200715084326.678715-2-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30vhost-scsi: support inflight io trackLi Feng
Qemu will send GET_INFLIGHT_FD and SET_INFLIGH_FD to backend, and the backend setup the inflight memory to track the io. Change-Id: I805d6189996f7a1b44c65f0b12ef7473b1789510 Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <20200909122021.1055174-1-fengli@smartx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30memory: Convert IOMMUMemoryRegionClass doc comment to kernel-docEduardo Habkost
Convert the existing documentation comments of IOMMUMemoryRegionClass to kernel-doc format so their contents will appear in the API reference at docs/devel/memory.html. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200908201129.3407568-1-ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30target/i386: support KVM_FEATURE_ASYNC_PF_INTVitaly Kuznetsov
Linux-5.8 introduced interrupt based mechanism for 'page ready' events delivery and disabled the old, #PF based one (see commit 2635b5c4a0e4 "KVM: x86: interrupt based APF 'page ready' event delivery"). Linux guest switches to using in in 5.9 (see commit b1d405751cd5 "KVM: x86: Switch KVM guest to using interrupts for page ready APF delivery"). The feature has a new KVM_FEATURE_ASYNC_PF_INT bit assigned and the interrupt vector is set in MSR_KVM_ASYNC_PF_INT MSR. Support this in QEMU. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200908141206.357450-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30MAINTAINERS: add Paolo Bonzini as RCU maintainerStefan Hajnoczi
The RCU code that Paolo maintains is missing a MAINTAINERS file entry. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200909090851.14458-1-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30configure: Do not intent to build WHPX on 32-bit hostPhilippe Mathieu-Daudé
Hyper-V is available on 64-bit versions of Windows, do not try to build its support on 32-bit versions. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200910054516.405777-1-f4bug@amsat.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-09-30WHPX: vmware cpuid leaf for tsc and apic frequencySunil Muthuswamy
Newer versions of WHPX provide the capability to query the tsc and apic frequency. Expose these through the vmware cpuid leaf. This patch doesnt support setting the tsc frequency; that will come as a separate fix. Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Message-Id: <SN4PR2101MB08808DFDDC3F442BBEAADFF4C0710@SN4PR2101MB0880.namprd21.prod.outlook.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30meson: error out if qemu_suffix starts with /Marc-André Lureau
Since the variable is used for path concatenation, the result would ignore the prefix directory altogether. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30meson: fix MSI ruleMarc-André Lureau
The environment variables can't be passed through an env: argument yet (meson#2723), use 'env' as suggested in: https://github.com/mesonbuild/meson/issues/2723#issuecomment-348630957 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30ninjatool: rebuild multi-output targets if outputs are missingPaolo Bonzini
The "stamp file trick" used to group targets of a single multi-output rule prevents the user from deleting one such target in order to force its rebuild. Doing so will not touch the stamp file, and therefore only the dummy ":" command will be executed. With this patch, ninjatool writes rules that force-rebuild the stamp file if any of its outputs are missing. Rebuilding the missing target therefore causes the stamp file to be rebuilt too. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30meson: clean up build_by_defaultPaolo Bonzini
Build all executables by default except for the known-broken ones. This also allows running qemu-iotests without manually building socket_scm_helper. Reported-by: Max Reitz <mreitz@redhat.com> Tested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30tests: add missing genh dependencyClaudio Fontana
Fix high-parallelism builds by forcing all generated headers to be created before tests are compiled. Reported-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-30Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi: unit test This just adds a unit test for previously merged functionality. A bit unusual, but we have a contribitor under a deadline, let's be nice and merge the unit test right away - does no harm. Hopefully this won't be a beginning of a trend ... Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 30 Sep 2020 09:13:13 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: tests/acpi: add DSDT.hpbrroot DSDT table blob to test global i440fx hotplug tests/acpi: unit test exercising global pci hotplug off for i440fx Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-30tests/acpi: add DSDT.hpbrroot DSDT table blob to test global i440fx hotplugAni Sinha
This change adds a new DSDT golden master table blob to test disabling hotplug on both pci root bus and pci bridges. Also reverts the change in file bios-tables-test-allowed-diff.h to make sure its now empty so that future modifications to acpi tables can be caught. The following is the disassembled diff between DSDT.hpbridge and DSDT.hpbrroot: @@ -5,13 +5,13 @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/pc/DSDT.hpbridge, Tue Sep 29 17:51:04 2020 + * Disassembly of tests/data/acpi/pc/DSDT.hpbrroot, Tue Sep 29 17:50:00 2020 * * Original Table Header: * Signature "DSDT" - * Length 0x0000139D (5021) + * Length 0x00000C07 (3079) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0x05 + * Checksum 0xAD * OEM ID "BOCHS " * OEM Table ID "BXPCDSDT" * OEM Revision 0x00000001 (1) @@ -247,38 +247,6 @@ } } - Scope (_SB.PCI0) - { - OperationRegion (PCST, SystemIO, 0xAE00, 0x08) - Field (PCST, DWordAcc, NoLock, WriteAsZeros) - { - PCIU, 32, - PCID, 32 - } - - OperationRegion (SEJ, SystemIO, 0xAE08, 0x04) - Field (SEJ, DWordAcc, NoLock, WriteAsZeros) - { - B0EJ, 32 - } - - OperationRegion (BNMR, SystemIO, 0xAE10, 0x04) - Field (BNMR, DWordAcc, NoLock, WriteAsZeros) - { - BNUM, 32 - } - - Mutex (BLCK, 0x00) - Method (PCEJ, 2, NotSerialized) - { - Acquire (BLCK, 0xFFFF) - BNUM = Arg0 - B0EJ = (One << Arg1) - Release (BLCK) - Return (Zero) - } - } - Scope (_SB) { Scope (PCI0) @@ -737,12 +705,6 @@ Scope (_GPE) { Name (_HID, "ACPI0006" /* GPE Block Device */) // _HID: Hardware ID - Method (_E01, 0, NotSerialized) // _Exx: Edge-Triggered GPE - { - Acquire (\_SB.PCI0.BLCK, 0xFFFF) - \_SB.PCI0.PCNT () - Release (\_SB.PCI0.BLCK) - } } Scope (\_SB.PCI0) @@ -813,22 +775,6 @@ ) }) } - - Device (PHPR) - { - Name (_HID, "PNP0A06" /* Generic Container Device */) // _HID: Hardware ID - Name (_UID, "PCI Hotplug resources") // _UID: Unique ID - Name (_STA, 0x0B) // _STA: Status - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - IO (Decode16, - 0xAE00, // Range Minimum - 0xAE00, // Range Maximum - 0x01, // Alignment - 0x14, // Length - ) - }) - } } Scope (\) @@ -878,7 +824,6 @@ { Scope (PCI0) { - Name (BSEL, Zero) Device (S00) { Name (_ADR, Zero) // _ADR: Address @@ -907,436 +852,6 @@ { Name (_ADR, 0x00030000) // _ADR: Address } - - Device (S20) - { - Name (_SUN, 0x04) // _SUN: Slot User Number - Name (_ADR, 0x00040000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S28) - { - Name (_SUN, 0x05) // _SUN: Slot User Number - Name (_ADR, 0x00050000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S30) - { - Name (_SUN, 0x06) // _SUN: Slot User Number - Name (_ADR, 0x00060000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S38) - { - Name (_SUN, 0x07) // _SUN: Slot User Number - Name (_ADR, 0x00070000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S40) - { - Name (_SUN, 0x08) // _SUN: Slot User Number - Name (_ADR, 0x00080000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S48) - { - Name (_SUN, 0x09) // _SUN: Slot User Number - Name (_ADR, 0x00090000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S50) - { - Name (_SUN, 0x0A) // _SUN: Slot User Number - Name (_ADR, 0x000A0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S58) - { - Name (_SUN, 0x0B) // _SUN: Slot User Number - Name (_ADR, 0x000B0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S60) - { - Name (_SUN, 0x0C) // _SUN: Slot User Number - Name (_ADR, 0x000C0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S68) - { - Name (_SUN, 0x0D) // _SUN: Slot User Number - Name (_ADR, 0x000D0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S70) - { - Name (_SUN, 0x0E) // _SUN: Slot User Number - Name (_ADR, 0x000E0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S78) - { - Name (_SUN, 0x0F) // _SUN: Slot User Number - Name (_ADR, 0x000F0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S80) - { - Name (_SUN, 0x10) // _SUN: Slot User Number - Name (_ADR, 0x00100000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S88) - { - Name (_SUN, 0x11) // _SUN: Slot User Number - Name (_ADR, 0x00110000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S90) - { - Name (_SUN, 0x12) // _SUN: Slot User Number - Name (_ADR, 0x00120000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (S98) - { - Name (_SUN, 0x13) // _SUN: Slot User Number - Name (_ADR, 0x00130000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SA0) - { - Name (_SUN, 0x14) // _SUN: Slot User Number - Name (_ADR, 0x00140000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SA8) - { - Name (_SUN, 0x15) // _SUN: Slot User Number - Name (_ADR, 0x00150000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SB0) - { - Name (_SUN, 0x16) // _SUN: Slot User Number - Name (_ADR, 0x00160000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SB8) - { - Name (_SUN, 0x17) // _SUN: Slot User Number - Name (_ADR, 0x00170000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SC0) - { - Name (_SUN, 0x18) // _SUN: Slot User Number - Name (_ADR, 0x00180000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SC8) - { - Name (_SUN, 0x19) // _SUN: Slot User Number - Name (_ADR, 0x00190000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SD0) - { - Name (_SUN, 0x1A) // _SUN: Slot User Number - Name (_ADR, 0x001A0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SD8) - { - Name (_SUN, 0x1B) // _SUN: Slot User Number - Name (_ADR, 0x001B0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SE0) - { - Name (_SUN, 0x1C) // _SUN: Slot User Number - Name (_ADR, 0x001C0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SE8) - { - Name (_SUN, 0x1D) // _SUN: Slot User Number - Name (_ADR, 0x001D0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SF0) - { - Name (_SUN, 0x1E) // _SUN: Slot User Number - Name (_ADR, 0x001E0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Device (SF8) - { - Name (_SUN, 0x1F) // _SUN: Slot User Number - Name (_ADR, 0x001F0000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - } - - Method (DVNT, 2, NotSerialized) - { - If ((Arg0 & 0x10)) - { - Notify (S20, Arg1) - } - - If ((Arg0 & 0x20)) - { - Notify (S28, Arg1) - } - - If ((Arg0 & 0x40)) - { - Notify (S30, Arg1) - } - - If ((Arg0 & 0x80)) - { - Notify (S38, Arg1) - } - - If ((Arg0 & 0x0100)) - { - Notify (S40, Arg1) - } - - If ((Arg0 & 0x0200)) - { - Notify (S48, Arg1) - } - - If ((Arg0 & 0x0400)) - { - Notify (S50, Arg1) - } - - If ((Arg0 & 0x0800)) - { - Notify (S58, Arg1) - } - - If ((Arg0 & 0x1000)) - { - Notify (S60, Arg1) - } - - If ((Arg0 & 0x2000)) - { - Notify (S68, Arg1) - } - - If ((Arg0 & 0x4000)) - { - Notify (S70, Arg1) - } - - If ((Arg0 & 0x8000)) - { - Notify (S78, Arg1) - } - - If ((Arg0 & 0x00010000)) - { - Notify (S80, Arg1) - } - - If ((Arg0 & 0x00020000)) - { - Notify (S88, Arg1) - } - - If ((Arg0 & 0x00040000)) - { - Notify (S90, Arg1) - } - - If ((Arg0 & 0x00080000)) - { - Notify (S98, Arg1) - } - - If ((Arg0 & 0x00100000)) - { - Notify (SA0, Arg1) - } - - If ((Arg0 & 0x00200000)) - { - Notify (SA8, Arg1) - } - - If ((Arg0 & 0x00400000)) - { - Notify (SB0, Arg1) - } - - If ((Arg0 & 0x00800000)) - { - Notify (SB8, Arg1) - } - - If ((Arg0 & 0x01000000)) - { - Notify (SC0, Arg1) - } - - If ((Arg0 & 0x02000000)) - { - Notify (SC8, Arg1) - } - - If ((Arg0 & 0x04000000)) - { - Notify (SD0, Arg1) - } - - If ((Arg0 & 0x08000000)) - { - Notify (SD8, Arg1) - } - - If ((Arg0 & 0x10000000)) - { - Notify (SE0, Arg1) - } - - If ((Arg0 & 0x20000000)) - { - Notify (SE8, Arg1) - } - - If ((Arg0 & 0x40000000)) - { - Notify (SF0, Arg1) - } - - If ((Arg0 & 0x80000000)) - { - Notify (SF8, Arg1) - } - } - - Method (PCNT, 0, NotSerialized) - { - BNUM = Zero - DVNT (PCIU, One) - DVNT (PCID, 0x03) - } } } } Signed-off-by: Ani Sinha <ani@anisinha.ca> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200929123011.31836-3-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-30tests/acpi: unit test exercising global pci hotplug off for i440fxAni Sinha
This change adds a unit test to exercise the case when hotplug is disabled both for pci root bus and the pci bridges by passing the following two switches to qemu: -global PIIX4_PM.acpi-root-pci-hotplug=off -global PIIX4_PM.acpi-pci-hotplug-with-bridge-support=off bios-tables-test-allowed-diff.h documents the fact that a new DSDT acpi gold master binary blob we need to be added to test this. We will do the actual addition in the next patch in the series. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200929123011.31836-2-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-09-29' into ↵Peter Maydell
staging QAPI patches patches for 2020-09-29 # gpg: Signature made Tue 29 Sep 2020 20:54:51 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2020-09-29: (29 commits) Remove texinfo dependency from docker and CI configs configure: Drop texinfo requirement Remove Texinfo related line from git.orderfile scripts/texi2pod: Delete unused script docs/devel/qapi-code-gen.txt: Update to new rST backend conventions scripts/qapi: Remove texinfo generation support tests/qapi-schema: Add test of the rST QAPI doc-comment output meson.build: Make manuals depend on source to Sphinx extensions meson.build: Move SPHINX_ARGS to top level meson.build file tests/qapi-schema: Convert doc-good.json to rST-style strong/emphasis qga/qapi-schema.json: Add some headings qapi: Use rST markup for literal blocks docs/interop: Convert qemu-qmp-ref to rST docs/interop: Convert qemu-ga-ref to rST docs/sphinx: Add new qapi-doc Sphinx extension qapi/machine.json: Escape a literal '*' in doc comment scripts/qapi/parser.py: improve doc comment indent handling scripts/qapi: Move doc-comment whitespace stripping to doc.py tests/qapi/doc-good.json: Prepare for qapi-doc Sphinx extension qapi/block.json: Add newline after "Example:" for block-latency-histogram-set ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-29Remove texinfo dependency from docker and CI configsPeter Maydell
We don't need texinfo to build the docs any more, so we can drop that dependency from our docker and other CI configs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-22-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29configure: Drop texinfo requirementPeter Maydell
We don't need the texinfo and pod2man programs to build our documentation any more, so remove them from configure's tests. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-21-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29Remove Texinfo related line from git.orderfilePeter Maydell
We don't use Texinfo any more; we can remove the references to the .texi source file from our git.orderfile. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-20-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29scripts/texi2pod: Delete unused scriptPeter Maydell
We no longer need the texi2pod script, so we can delete it, and the special-casing it had in the checkpatch script. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-19-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29docs/devel/qapi-code-gen.txt: Update to new rST backend conventionsPeter Maydell
Update the documentation of QAPI document comment syntax to match the new rST backend requirements. The principal changes are: * whitespace is now significant, and multiline definitions must have their second and subsequent lines indented to match the first line * general rST format markup is permitted, not just the small set of markup the old texinfo generator handled. For most things (notably bulleted and itemized lists) the old format was the same as rST is. * Specific things that might trip people up: - instead of *bold* and _italic_ rST has **bold** and *italic* - lists need a preceding and following blank line - a lone literal '*' will need to be backslash-escaped to avoid a rST syntax error * the old leading '|' for example (literal text) blocks is replaced by the standard rST '::' literal block. * we support arbitrary levels of sub- and sub-sub-heading, not just a main and sub-heading like the old texinfo generator * lists can now be nested Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-18-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message improved slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29scripts/qapi: Remove texinfo generation supportPeter Maydell
We no longer use the generated texinfo format documentation, so delete the code that generates it, and the test case for the generation. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-17-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29tests/qapi-schema: Add test of the rST QAPI doc-comment outputPeter Maydell
Add a test of the rST output from the QAPI doc-comment generator, similar to what we currently have that tests the Texinfo output. This is a bit more awkward with Sphinx, because the generated output is not 100% under our control the way the QAPI-to-Texinfo generator was. We can't observe the data we generate, only the Sphinx output. Two issues. One, the output can vary with the Sphinx version. In practice Sphinx's plaintext output generation has been identical between at least Sphinx 1.6 and 3.0, so we use that. (The HTML output has had changes across versions). We use an exact-match comparison check, with the understanding that perhaps changes in a future Sphinx version might require us to implement something more clever to cope with variation in the output. Two, the test can only protect us from changes in the data we generate that are visible in plain text. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-16-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29meson.build: Make manuals depend on source to Sphinx extensionsPeter Maydell
The automatic dependency handling for Sphinx manuals only makes the output depend on the input documentation files. This means that if you edit the Python source of an extension then the documentation won't be rebuilt. Create a list of all the source files for the extensions and add it to the dependencies for the manuals. This is similar to how we handle the qapi_gen_depends list. Because we don't try to identify which manuals are using which Sphinx extensions, a change to the source of one extension will always rebuild the entire manual set, not merely the manuals which have changed. This is acceptable because we don't change the extensions all that often. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-15-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Re rebuilding the enitre manual set being acceptable "because we don't change the extensions all that often": we also rebuild it when the QAPI generator code the qapidoc extension depends on changes. This will inconvenience QAPI developers. Can't be helped now.] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29meson.build: Move SPHINX_ARGS to top level meson.build filePeter Maydell
We're going to want to use SPHINX_ARGS in both docs/meson.build and tests/qapi-schema/meson.build. Move the definition up to the top level file so it is available to both subdirectories. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-14-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29tests/qapi-schema: Convert doc-good.json to rST-style strong/emphasisPeter Maydell
doc-good.json currently uses the old *strong* and _emphasis_ markup. As part of the conversion to rST this needs to switch to **strong** and *emphasis*, because rST uses underscores as part of its markup of hyperlinks and will otherwise warn about the syntax error. In commit a660eed482063b we fixed up the in-tree uses of the old markup: 1) _this_ was replaced with *this* 2) the only in-tree use of *this* was left alone (turning a 'strong' into an 'emphasis') (and so currently in-tree nothing is using either new-style **strong** or old-style _emphasis_). Update doc-good.json in a similar way: 1) replace _this_ with *this* 2) remove the usage of old-style *this* (This slightly reduces the coverage for the old Texinfo generator, which is about to go away, but is fine for the new rST generator because that does not need to handle strong/emphasis itself because it is simply passing the entire text as raw rST to Sphinx.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-13-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qga/qapi-schema.json: Add some headingsPeter Maydell
Add some section headings to the QGA json; this is purely so that we have some H1 headings, as otherwise each command ends up being visible in the interop/ manual's table of contents. In an ideal world there might be a proper 'Introduction' section the way there is in qapi/qapi-schema.json. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-12-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Use rST markup for literal blocksPeter Maydell
There are exactly two places in our json doc comments where we use the markup accepted by the texi doc generator where a '|' in the first line of a doc comment means the line should be emitted as a literal block (fixed-width font, whitespace preserved). Since we use this syntax so rarely, instead of making the rST generator support it, instead just convert the two uses to rST-format literal blocks, which are indented and introduced with '::'. (The rST generator doesn't complain about the old style syntax, it just emits it with the '|' and with the whitespace not preserved, which looks odd, but means we can safely leave this change until after we've stopped generating texinfo.) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-11-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29docs/interop: Convert qemu-qmp-ref to rSTPeter Maydell
Convert qemu-qmp-ref to rST format. This includes dropping the plain-text, pdf and info format outputs for this document; as with all our other Sphinx-based documentation, we provide HTML and manpage only. The qemu-qmp-ref.rst is somewhat more stripped down than the .texi was, because we do not (currently) attempt to generate indexes for the commands, events and data types being documented. Again, we drop the direct link from index.html.in now that the QMP ref is part of the interop manual. This commit removes the code from the root meson.build file that handled the various Texinfo-based outputs, because we no longer generate any documentation except for the Sphinx HTML manuals and the manpages, and the code can't handle having an empty list of files to process.. We'll do further cleanup of the remainders of Texinfo support in subsequent commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-10-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Unicode legacy literal dumbed down to plain string literal, TODO comment on displaying QEMU version added, "make html" fixed, storage-daemon/qapi/meson.build updated] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29docs/interop: Convert qemu-ga-ref to rSTPeter Maydell
Convert qemu-ga-ref to rST format. This includes dropping the plain-text, pdf and info format outputs for this document; as with all our other Sphinx-based documentation, we provide HTML and manpage only. The qemu-ga-ref.rst is somewhat more stripped down than the .texi was, because we do not (currently) attempt to generate indexes for the commands, events and data types being documented. As the GA ref is now part of the Sphinx 'interop' manual, we can delete the direct link from index.html.in. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-9-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Unicode legacy literal dumbed down to plain string literal, TODO comment on displaying QEMU version added] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29docs/sphinx: Add new qapi-doc Sphinx extensionPeter Maydell
Some of our documentation is auto-generated from documentation comments in the JSON schema. For Sphinx, rather than creating a file to include, the most natural way to handle this is to have a small custom Sphinx extension which processes the JSON file and inserts documentation into the rST file being processed. This is the same approach that kerneldoc and hxtool use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-8-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Comment and doc string formatting tweaked, unused method dropped, a few line breaks tweaked to follow PEP 8 more closely, MAINTAINERS section QAPI updated] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi/machine.json: Escape a literal '*' in doc commentPeter Maydell
For rST, '*' is a kind of inline markup (for emphasis), so "*-softmmu" is a syntax error because of the missing closing '*'. Escape the '*' with a '\'. The texinfo document generator will leave the '\' in the output, which is not ideal, but that generator is going to go away in a subsequent commit. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-7-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29scripts/qapi/parser.py: improve doc comment indent handlingPeter Maydell
Make the handling of indentation in doc comments more sophisticated, so that when we see a section like: Notes: some text some more text indented line 3 we save it for the doc-comment processing code as: some text some more text indented line 3 and when we see a section with the heading on its own line: Notes: some text some more text indented text we also accept that and save it in the same form. If we detect that the comment document text is not indented as much as we expect it to be, we throw a parse error. (We don't complain about over-indented sections, because for rST this can be legitimate markup.) The golden reference for the doc comment text is updated to remove the two 'wrong' indents; these now form a test case that we correctly stripped leading whitespace from an indented multi-line argument definition. We update the documentation in docs/devel/qapi-code-gen.txt to describe the new indentation rules. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-6-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Whitespace between sentences tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29scripts/qapi: Move doc-comment whitespace stripping to doc.pyPeter Maydell
As we accumulate lines from doc comments when parsing the JSON, the QAPIDoc class generally strips leading and trailing whitespace using line.strip() when it calls _append_freeform(). This is fine for Texinfo, but for rST leading whitespace is significant. We'd like to move to having the text in doc comments be rST format rather than a custom syntax, so move the removal of leading whitespace from the QAPIDoc class to the texinfo-specific processing code in texi_format() in qapi/doc.py. (Trailing whitespace will always be stripped by the rstrip() in Section::append regardless.) In a followup commit we will make the whitespace in the lines of doc comment sections more consistently follow the input source. There is no change to the generated .texi files before and after this commit. Because the qapi-schema test checks the exact values of the documentation comments against a reference, we need to update that reference to match the new whitespace. In the first four places this is now correctly checking that we did put in the amount of whitespace to pass a rST-formatted list to the backend; in the last two places the extra whitespace is 'wrong' and will go away again in the following commit. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-5-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29tests/qapi/doc-good.json: Prepare for qapi-doc Sphinx extensionPeter Maydell
doc-good.json tests doc comment parser corner cases. We're about to largely replace it by a Sphinx extension, which will have different corner cases. Tweak the test so it passes both with the old parser and the Sphinx extension, by making it match the more restrictive rST syntax: * in a single list the bullet types must all match * lists must have leading and following blank lines * the rules on when and where indentation matters differ * the '|' example syntax is going to go away entirely, so stop testing it This will avoid the tests spuriously breaking when we tighten up the parser code in the following commits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-4-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi/block.json: Add newline after "Example:" for block-latency-histogram-setPeter Maydell
The block-latency-histogram-set command is the only one which uses the Example/Examples section with the first line of the documentation immediately following the ':'. Bring it into line with the rest. This will allow us to avoid special-casing the indentation handling for "Examples" sections; instead for Examples as for any other section header these two indentations will be equivalent: Examples: Line one Line two Examples: Line one Line two Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-3-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Fix doc comment indentation againPeter Maydell
In commit 26ec4e53f2 and similar commits we fixed the indentation for doc comments in our qapi json files to follow a new stricter standard for indentation, which permits only: @arg: description line 1 description line 2 or: @arg: line 1 line 2 but because the script updates that enforce this are not yet in the tree we have had a steady trickle of subsequent changes which didn't follow the new rules. Fix the latest round of mis-indented doc comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-2-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Updated for commit 4c437254b807 and a83e24ba1a5] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Extract PCI commands to 'pci.json'Philippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the PCI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-9-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Extract ACPI commands to 'acpi.json'Philippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the ACPI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-8-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict device memory commands to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the memory commands to machine.json pulls less QAPI-generated code into user-mode. Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-7-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict query-uuid command to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the query-uuid command to machine.json pulls less QAPI-generated code into user-mode. Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-6-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict query-vm-generation-id command to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the query-vm-generation-id command to machine.json pulls less QAPI-generated code into user-mode. Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-5-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict balloon-related commands to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the balloon-related commands to machine.json pulls less QAPI-generated code into user-mode. Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-4-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Correct balloon documentationPhilippe Mathieu-Daudé
The documentation incorrectly uses the "size of the balloon" description when it should be "logical size of the VM". Fix it. The relation between both values is: logical_vm_size = vm_ram_size - balloon_size Reported-by: David Hildenbrand <david@redhat.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-3-philmd@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict LostTickPolicy enum to machine codePhilippe Mathieu-Daudé
Restricting LostTickPolicy to machine.json pulls slightly less QAPI-generated code into user-mode. Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-2-philmd@redhat.com> [Add rationale to commit message] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi: fixup My last pull included a ton of useless files by mistake. Drop them all. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 29 Sep 2020 12:12:20 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: tests/acpi: drop unnecessary files Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 23:52:49 +0000