aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-04usb: use iovecs in USBPacketGerd Hoffmann
Zap data pointer from USBPacket, add a QEMUIOVector instead. Add a bunch of helper functions to manage USBPacket data. Switch over users to the new interface. Note that USBPacket->len was used for two purposes: First to pass in the buffer size and second to return the number of transfered bytes or the status code on async transfers. There is a new result variable for the latter. A new status code was added to catch uninitialized result. Nobody creates iovecs with more than one element (yet). Some users are (temporarely) limited to iovecs with a single element to keep the patch size as small as possible. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-04move QEMUSGList typedefGerd Hoffmann
Move the QEMUSGList typedef to qemu-common so it can easily be used. The actual struct definition stays in dma.h. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-04Add iov_clear()Gerd Hoffmann
Fill the spefified area with zeros. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-04Add iov_hexdump()Gerd Hoffmann
Useful for debugging purposes. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-04re-activate usb-host for bsdGerd Hoffmann
A bunch of code was disabled via #if 0, for a quite long time (since Sept 2009). Surprisingly the code builds just fine when they are removed (tested on OpenBSD). /me wonders nevertheless whenever there are any users of those bits when this went unnoticed for almost two years ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-04lm32: softusb: claim to support full speedMichael Walle
The QEMU keyboard and mouse reports themselves as full speed devices, though they are actually low speed devices. Until this is fixed, claim that we are supporting full speed devices. Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-08-01Sparc: fix non-faulting unassigned memory accessesBlue Swirl
Commit b14ef7c9ab41ea824c3ccadb070ad95567cca84e introduced cpu_unassigned_access() function. On Sparc, the function does not restore AREG0 used for global CPUState on function exit, causing bugs with non-faulting unassigned memory accesses. Alpha, Microblaze and MIPS are not affected. Fix by restoring AREG0 on exit. Remove excess saving by do_unassigned_access() functions. Also ignore unassigned accesses outside of CPU context. Reported-by: Bob Breuer <breuerr@mc.net> Tested-by: Bob Breuer <breuerr@mc.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-31microblaze: Add missing call to qemu_init_vcpu.Peter A. G. Crosthwaite
Fixes emulation with io-thread. Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-07-30TCG: fix breakage by previous patchBlue Swirl
Fix incorrect logic and typos in previous commit 1bfd07bdfe56cea43dbe258dcb161e46b0ee29b7. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30TCG: fix breakage on some RISC hostsBlue Swirl
Fix breakage by a640f03178c22355a158fa9378e4f8bfa4f517a6 and 55c0975c5b358e948b9ae7bd7b07eff92508e756. Some TCG targets don't implement all TCG ops, so make optimizing those conditional. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30Do constant folding for unary operations.Kirill Batuzov
Perform constant folding for NOT and EXT{8,16,32}{S,U} operations. Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30Do constant folding for shift operations.Kirill Batuzov
Perform constant forlding for SHR, SHL, SAR, ROTR, ROTL operations. Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30Do constant folding for boolean operations.Kirill Batuzov
Perform constant folding for AND, OR, XOR operations. Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30Do constant folding for basic arithmetic operations.Kirill Batuzov
Perform actual constant folding for ADD, SUB and MUL operations. Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30Add copy and constant propagation.Kirill Batuzov
Make tcg_constant_folding do copy and constant propagation. It is a preparational work before actual constant folding. Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30Add TCG optimizations stubKirill Batuzov
Added file tcg/optimize.c to hold TCG optimizations. Function tcg_optimize is called from tcg_gen_code_common. It calls other functions performing specific optimizations. Stub for constant folding was added. Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30exec.h cleanupBlue Swirl
Move softmmu_exec.h include directives from target-*/exec.h to target-*/op_helper.c. Move also various other stuff only used in op_helper.c there. Define global env in dyngen-exec.h. For i386, move wrappers for segment and FPU helpers from user-exec.c to op_helper.c. Implement raise_exception_err_env() to handle dynamic CPUState. Move the function declarations to cpu.h since they can be used outside of op_helper.c context. LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and env_to_regs(). ARM: make raise_exception() static. Convert #include "exec.h" to #include "cpu.h" #include "dyngen-exec.h" and remove now unused target-*/exec.h. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30revamp acpitable parsing and allow to specify complete (headerful) tableMichael Tokarev
This patch almost rewrites acpi_table_add() function (but still leaves it using old get_param_value() interface). The result is that it's now possible to specify whole table (together with a header) in an external file, instead of just data portion, with a new file= parameter, but at the same time it's still possible to specify header fields as before. Now with the checkpatch.pl formatting fixes, thanks to Stefan Hajnoczi for suggestions, with changes from Isaku Yamahata, and with my further refinements. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Cc: John Baboval <john.baboval@virtualcomputer.com> Cc: Blue Swirl <blauwirbel@gmail.com> [yamahata@valinux.co.jp: fix compile error, comment fallthrough] Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30SPARC64: implement %fprs dirty bitsTsuneo Saito
Implement %fprs.DU/DL bits. The FPU sets %fprs.DL and %fprs.DU when values are assigned to %f0-31 and %f32-63 respectively. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30SPARC64: fix fnor* and fnand*Tsuneo Saito
Fix the problem that result values are not assigned to the destination registers. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30sd: do not add one sector to the disk sizeVincent Palatin
This leads to random off-by-one error. When the size of the SD is exactly 1GB, the emulation was returning a wrong SDHC CSD descriptor. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30user: Restore debug usage message for '-d ?' in user mode emulationPeter Maydell
The code which prints the debug usage message on '-d ?' for *-user has to come before the check for "not enough arguments", so that "qemu-foo -d ?" prints the list of possible debug log items rather than the generic usage message. (This was inadvertently broken in commit c235d73.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30usb-hid: Fix 0/0 position for Windows in tablet modeJan Kiszka
For unknown reasons, Windows drivers (tested with XP and Win7) ignore usb-tablet events that move the pointer to 0/0. So always report 0/0 as 1/0. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30Add support for Zipit Z2 machineVasily Khoruzhick
Zipit Z2 is small PXA270 based handheld. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30onenand: Add missing brace.Andrzej Zaborowski
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/onenand: program actions can only clear bitsJuha Riihimäki
The program actions onenand_prog_main() and onenand_prog_spare() can only set bits. This implies a rewrite of onenand_erase() to not use the program functions, since erase does need to set bits. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30onenand: Handle various ID fields separatelyJuha Riihimäki
Handle the manufacturer, device and version IDs separately rather than smooshing them all together into a single uint32_t. Note that the ID registers are actually 16 bit, even though typically the top bits are 0 and the Read Identification Data command only returns the bottom 8 bits. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30onenand: Pass BlockDriverState to init functionPeter Maydell
Pass the BlockDriverState to the onenand init function so it doesn't need to look up the drive itself. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: qdevifyJuha Riihimäki
Qdevify the NAND device. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Writing to NAND can only clear bitsPeter Maydell
Writing to a NAND device cannot set bits, it can only clear them; implement this rather than simply copying the data. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Support multiple reads following READ STATUSJuha Riihimäki
After receiving READ STATUS command all subsequent IO reads should return the status register value until another command is issued. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Support devices wider than 8 bitsJuha Riihimäki
Support NAND devices which are wider than 8 bits. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30nand: Bump vmstate version after changing structure.Andrzej Zaborowski
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Support large NAND devicesJuha Riihimäki
Add support for NAND devices of over 1Gb. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Pass block device state to init functionPeter Maydell
Pass the BlockDeviceState to the nand_init() function rather than having it look it up via drive_get() itself. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30lm832x: Take DeviceState pointer in lm832x_key_event()Peter Maydell
Since lm832x has been qdev'ified, its users will generally have a DeviceState pointer rather than an i2c_slave pointer, so adjust lm832x_key_event's prototype to suit. This allows the n810 (its only user) to actually pass a correct pointer to it rather than NULL. The effect is that we no longer segfault when a key is pressed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/omap_gpio.c: Convert to qdevJuha Riihimäki
Convert the OMAP GPIO module to qdev. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/omap_clk: Add the clock for the OMAP2430-specific fifth GPIO modulePeter Maydell
The OMAP2430 has a fifth GPIO module which earlier OMAP2 models lack; add the clock definition for it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/omap_l4.c: Add helper function omap_l4_region_baseJuha Riihimäki
Add helper function omap_l4_region_base() to return the base address of a particular region of an L4 target agent. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-29Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-07-29Merge remote-tracking branch 'alon/pull-libcacard.afe' into stagingAnthony Liguori
2011-07-29Merge remote-tracking branch 'agraf/xen-next' into stagingAnthony Liguori
2011-07-29Merge remote-tracking branch 'kraxel/migration.2' into stagingAnthony Liguori
2011-07-29monitor: fix build breakage with --disable-vncTeLeMan
The breakage was introduced by the commit 13661089810d3e59931f3e80d7cb541b99af7071 Signed-off-by: TeLeMan <geleman@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29Allow to leave type on default in -machineJan Kiszka
This allows to specify -machine options without setting an explicit machine type. We will pick the default machine in this case. Requesting the list of available machines is still possible via '-machine ?' e.g. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29CODING_STYLE: explicitly allow braceless 'else if'Avi Kivity
It's already allowed by the example; there are about 1800 instances in the tree; and disallowing it would lead to if (a) { ... } else { if (b) { ... } else { if (c) { ... } else { if (d) { ... } else { ... } } } } instead of if (a) { ... } else if (b) { ... } else if (c) { ... } else if (d) { ... } else { ... } which is more readable. Acked-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29Fix a compilation error in xen-mapcache.cStefan Berger
This patch fixes a compilation error in xen-mapcache.c . /home/stefanb/qemu/qemu-git/xen-mapcache.c: In function ‘xen_ram_addr_from_mapcache’: /home/stefanb/qemu/qemu-git/xen-mapcache.c:240:42: error: variable ‘pentry’ set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29multiboot: Fix bss segment supportGöran Weinholt
Multiboot images can specify a bss segment. The boot loader must clear the memory of the bss and ensure that no modules or structures are allocated inside it. Several fields are provided in the Multiboot header that were previously not used properly. The header is now used to determine how much data should be read from the image and how much memory should be reserved to the bss segment. Signed-off-by: Göran Weinholt <goran@weinholt.se> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29configure: add --disable-zlib-testAlon Levy
This is required for building libcacard which doesn't itself require zlib without bringing in this requirement to the build environment. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29Add missing trace call to oslib-posix.c:qemu_vmalloc()Jes Sorensen
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 07:45:03 +0000